Luminescent Dinuclear Copper(I) Complexes Bearing an Imidazolylpyrimidine Bridging Ligand

Unique Crystal Structure of a Self-Assembled Dinuclear Cu Peptoid Reveals an Unusually Long Cu···Cu Distance

Studies on a series of molecular dicopper peptoid complexes showed that the Cu···Cu distances measured in X-ray single-crystal diffraction are typically in the range of 4.2-6.9 Å. Herein, we designed a new peptoid, L1, having 2,2'-bipyridine, propyl, and pyridyl side chains and discovered that although it forms a typical dicopper self-assembled structure (complex 1), the Cu···Cu distance is exceedingly long -8.043 Å. By analyzing its structure and surface properties in comparison to a control Cu-peptoid complex (2), in which the pyridyl side chain is modified by an ethanolic side chain, we suggest that the long Cu···Cu distance is contributed by the hydrophilic-hydrophobic interaction influenced by the pyridyl side chain and the steric hindrance of the propyl side chain. This result may motivate the use of dinuclear Cu peptoid complexes for wider applications, such as cooperative catalysis and luminescence.

Research on Synthesis, Structure, and Catalytic Performance of Tetranuclear Copper(I) Clusters Supported by 2-Mercaptobenz-zole-Type Ligands

Tetrahedral copper(I) clusters [Cu4(MBIZ)4(PPh3)2] (2), [Cu4(MBOZ)4(PPh3)4] (6) (MBIZ = 2-mercaptobenzimidazole, MBOZ = 2-mercaptobenzoxazole) were prepared by regulation of the copper-thiolate clusters [Cu6(MBIZ)6] (1) and [Cu8(MBOZ)8I]- (5) with PPh3. With the presence of iodide anion, the regulation provided the iodide-containing clusters [CuI4(MBIZ)3(PPh3)3I] (3) and [CuI4(MBOZ)3(PPh3)3I] (7). The cyclic voltammogram of 3 in MeCN (0.1 M nBu4NPF6, 298 K) at a scan rate of 100 mV s-1 shows two oxidation processes at Epa = +0.11 and +0.45 V with return waves observed at Epc = +0.25 V (vs. Fc+/Fc). Complex 3 has a higher capability to lose and gain electrons in the redox processes than complexes 2, 4, 4', 6, and 7. Its thermal stability was confirmed by thermogravimetric analysis. The catalytic performance of 3 was demonstrated by the catalytic transformation of iodobenzenes to benzonitriles using AIBN as the cyanide source. The nitrile products show potential applications in the preparation of 1,3,5-triazine compounds for organic fluorescence materials.

Electrocatalytic hydrogen evolution mediated by an organotelluroxane macrocycle stabilized through secondary interactions

A discrete liphophilic organotelluroxane macrocycle has been found to catalyse the hydrogen evolution reaction (HER) by proton reduction efficiently. The macrocycle is synthesized via chloride abstraction from bis(p-methoxyphenyl) tellurium dichloride (p-MeOC6H5)2TeCl2 (1) by silver salts AgMX4 (MX4 = BF4-, and ClO4-) resulting in in situ generated di-cationic tetraorganoditelluroxane units; two such units are held together by two weak anions μ2-MX4, bridging to form 12-membered di-cationic macrocycles [((p-MeO-C6H4)2Te)2(μ-O)(μ2-F2BF2)2]2+ (2) and [((p-MeO-C6H4)2Te)2(μ-O)(μ2-O2ClO2)2]2+ (3) stabilized via Te-(μ2-BF4/ClO4), with secondary interactions. The charge is balanced by the presence of two more anions, one above and another below the plane of the macrocycle. Similar reaction at higher temperatures leads to the formation of telluronium salts R3TeX [X = BF4- (4), ClO4- (5)] as a major product. The BF4- anion containing macrocycle and telluronium salt were monitored using 19F NMR. HRMS confirmed the structural stability of all the compounds in the solution state. The organotelluroxane macrocycle 2 has been found to act as an efficient electrocatalyst for proton reduction in an organic medium in the presence of p-toluene sulfonic acid as a protic source.

Strategy for an Effective Eco-Optimized Design of Heteroleptic Cu(I) Coordination Polymers Exhibiting Thermally Activated Delayed Fluorescence

The new series of copper(I) coordination polymers [Cu(N-N)(μ-PTA)]n[PF6]n {N-N = dmbpy (1), bpy (2), ncup (3), and phen (4)} were generated by straightforward reaction in solution or through a mechanochemical route, of [Cu(MeCN)4][PF6] with 1,3,5-triaza-7-phosphaadamantane (PTA) and the corresponding polypyridines, namely, 5,5'-dimethyl-2,2'-bipyridine (dmbpy), 2,2'-bipyridine (bpy), 2,9-dimethyl-1,10-phenanthroline (ncup), and 1,10-phenanthroline (phen). The compounds were obtained as air-stable solids and fully characterized by IR, NMR spectroscopy, and elemental analyses. The molecular structures were confirmed by single-crystal X-ray diffraction analysis (for 1, 2, and 4), revealing infinite one-dimensional (1D) linear chains driven by μ-PTA N,P-linkers. All tested Cu(I) polymeric compounds show emission at room temperature, which was attributed to thermally activated delayed fluorescence (TADF). Evidence of the involvement of the excited singlet state in the emission process is presented. Comparing the photophysical properties of 1 and 2 as well as 3 and 4, of which 1 and 3 have a stiffened structure, by introducing a methyl group to one of the ligands, we demonstrate how TADF properties depend on molecular rigidity. It is shown that stiffening of the structure reduces the flattening distortion around the Cu(I) center in the 3MLCT state. As a result, the ΔE(S1-T1) energy gap becomes smaller and the fluorescence quantum yield increases without significantly extending the emission lifetime. In particular, the ΔE(S1-T1) values for complexes 1 and 3 are among the shortest reported in the scientific literature, 253 and 337 cm-1, and the TADF lifetimes are τ(300 K) = 5.7 and 4.2 μs, respectively. The fluorescence quantum yields for these complexes are measured to be ΦPL(300 K) = 70 and 80%.

Synthesis, structure and photoluminescence of Cu(I) complexes containing new functionalized 1,2,3-triazole ligands

The reaction of a triazole ligand, 2-(1H-1,2,3-triazol-4-yl)pyridine (L1), with 2-bromopyridine afforded three new ligands, 2,2'-(1H-1,2,3-triazole-1,4-diyl)dipyridine (L2), 2,2'-(2H-1,2,3-triazole-2,4-diyl)dipyridine (L3) and 2,2'-(1H-1,2,3-triazole-1,5-diyl)dipyridine (L4). A series of luminescent mononuclear copper(I) complexes of these ligands [Cu(Ln)(P^P)](ClO4) [n = 1, P^P = (PPh3)2 (1); n = 1, P^P = POP (2); n = 2, P^P = (PPh3)2 (3); n = 2, P^P = POP (4); n = 3, P^P = (PPh3)2 (5); n = 3, P^P = POP (6); n = 4, P^P = (PPh3)2 (9); n = 4, P^P = POP (10)] have been obtained from the reaction of Ln with [Cu(MeCN)4]ClO4 in the presence of PPh3 and POP. L3 was also found to form dinuclear compounds [Cu2(L3)(PPh3)4](ClO4)2 (7) and [Cu2(L3)(POP)2](ClO4)2 (8). All of the Cu(I) compounds have been characterized by IR, UV/vis, CV, 1H NMR, and 31P{1H} NMR. The molecular structures of 1-3, 5, and 7 have been further determined by X-ray crystallography. In CH2Cl2 solutions, these Cu(I) complexes exhibit tunable green to orange emissions (563-621 nm) upon excitation at λex = 380 nm. In the solid state, these complexes show intense emissions and it is interesting to note that 1 and 3 are blue-light emitters. Density functional theory (DFT) calculations revealed that the lowest energy electronic transition associated with these complexes predominantly originates from metal-to-ligand charge transfer transitions (MLCT).

Thermally activated delayed fluorescence in luminescent cationic copper(i) complexes

In this work, the photophysical characteristics of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes were described. The concept of thermally activated delayed fluorescence (TADF) and its development throughout the years was also explained. The importance of ΔE (S1-T1) and spin-orbital coupling (SOC) values on the TADF behavior of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes is discussed. Examples of ΔE (S1-T1) values reported in the literature were collected and some trends were proposed (e.g. the effect of the substituents at the 2,9 positions of the phenanthroline ligand). Besides, the techniques (or calculation methods) used for determining ΔE (S1-T1) values were described. The effect of SOC in TADF was also discussed, and examples of the determination of SOC values by DFT and TD-DFT calculations are provided. The last chapter covers the applications of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ TADF complexes and the challenges that are still needed to be addressed to ensure the industrial applications of these compounds.

Fabrication of a Solution-Processed White Light Emitting Diode Containing a Single Dimeric Copper(I) Emitter Featuring Combined TADF and Phosphorescence

Luminescent copper(I) complexes showing thermally activated delayed fluorescence (TADF) have developed to attractive emitter materials for organic light emitting diodes (OLEDs). Here, we study the brightly luminescent dimer Cu2Cl2(P∩N)2 (P∩N = diphenylphosphanyl-6-methyl-pyridine), which shows both TADF and phosphorescence at ambient temperature. A solution-processed OLED with a device structure ITO/PEDOT:PSS/PYD2: Cu2Cl2(P∩N)2/DPEPO (10 nm)/TPBi (40 nm)/LiF (1.2 nm)/Al (100 nm) shows warm white emission with moderate external quantum efficiency (EQE). Methods for EQE increase strategies are discussed.

Molecular copper iodide clusters: a distinguishing family of mechanochromic luminescent compounds

Mechanochromic luminescent materials displaying switchable luminescence properties in response to external mechanical force are currently attracting wide interest because of their multiple potential applications. In the growing number of mechanochromic luminescent compounds, mechanochromic complexes based on copper present appealing features with a large variety of mechanochromic properties and economical advantages over other metals. Among Cu-based compounds, molecular copper iodide clusters of cubane geometry with formula [Cu₄I₄L₄] (L = organic ligand) stand out. Indeed, they can exhibit multiple luminescent stimuli-responsive properties, being particularly suitable for the development of multifunctional photoactive systems. This perspective describes the survey of these mechanochromic luminescent cubane copper iodide clusters. Based on our investigations, their mechanochromic luminescence properties are presented along with the study of the underlying mechanism. Establishment of structure-property relationships supported by various characterization techniques and associated with theoretical investigations permits gaining insights into the mechanism at play. Studies of other researcher groups are also described and illustrate the interest shown by these mechanochromic compounds. Mechanically responsive films are reported, demonstrating their potential use in a range of applications of such copper-based stimuli-responsive materials. Current challenges faced by the development of technological applications are finally outlined.

P∩N Bridged Cu(I) Dimers Featuring Both TADF and Phosphorescence. From Overview towards Detailed Case Study of the Excited Singlet and Triplet States

We present an overview over eight brightly luminescent Cu(I) dimers of the type Cu₂X₂(P∩N)₃ with X = Cl, Br, I and P∩N = 2-diphenylphosphino-pyridine (Ph₂Ppy), 2-diphenylphosphino-pyrimidine (Ph₂Ppym), 1-diphenylphosphino-isoquinoline (Ph₂Piqn) including three new crystal structures (Cu₂Br₂(Ph₂Ppy)₃ 1-Br, Cu₂I₂(Ph₂Ppym)₃ 2-I and Cu₂I₂(Ph₂Piqn)₃ 3-I). However, we mainly focus on their photo-luminescence properties. All compounds exhibit combined thermally activated delayed fluorescence (TADF) and phosphorescence at ambient temperature. Emission color, decay time and quantum yield vary over large ranges. For deeper characterization, we select Cu₂I₂(Ph₂Ppy)₃, 1-I, showing a quantum yield of 81%. DFT and SOC-TDDFT calculations provide insight into the electronic structures of the singlet S₁ and triplet T₁ states. Both stem from metal+iodide-to-ligand charge transfer transitions. Evaluation of the emission decay dynamics, measured from 1.2 ≤ T ≤ 300 K, gives ∆E(S₁-T₁) = 380 cm⁻¹ (47 meV), a transition rate of k(S₁→S₀) = 2.25 × 10⁶ s⁻¹ (445 ns), T₁ zero-field splittings, transition rates from the triplet substates and spin-lattice relaxation times. We also discuss the interplay of S₁-TADF and T₁-phosphorescence. The combined emission paths shorten the overall decay time. For OLED applications, utilization of both singlet and triplet harvesting can be highly favorable for improvement of the device performance.

Efficiently luminescent mononuclear copper iodide complexes with sterically hindered iminephosphine chelating ligands

Cu(i) complexes realize high luminescence properties due to steric hindrances of the ligands and synergistic heavy atom (Cu and I) effects.