BiOI Particles Confined into Metal-Organic Framework NU-1000 for Valid Photocatalytic Hydrogen Evolution under Visible-Light Irradiation

Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Metal-organic framework heterojunctions for photocatalysis

Heterojunctions combining two photocatalysts of staggered conduction and valence band energy levels can increase the photocatalytic efficiency compared to their individual components. This activity enhancement is due to the minimization of undesirable charge recombination by the occurrence of carrier migration through the heterojunction interface with separated electrons and holes on the reducing and oxidizing junction component, respectively. Metal-organic frameworks (MOFs) are currently among the most researched photocatalysts due to their tunable light absorption, facile charge separation, large surface area and porosity. The present review summarizes the current state-of-the-art in MOF-based heterojunctions, providing critical comments on the construction of these heterostructures. Besides including examples showing the better performance of MOF heterojunctions for three important photocatalytic processes, such as hydrogen evolution reaction, CO2 photoreduction and dye decolorization, the focus of this review is on describing synthetic procedures to form heterojunctions with MOFs and on discussing the experimental techniques that provide evidence for the operation of charge migration between the MOF and the other component. Special attention has been paid to the design of rational MOF heterojunctions with small particle size and controlled morphology for an appropriate interfacial contact. The final section summarizes the achievements of the field and provides our views on future developments.

Fe- and S-Modified BiOI as Catalysts to Oxygen Evolution and Hydrogen Evolution Reactions in Overall Photoelectrochemical Water Splitting

Developing catalysts with superior activity to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is equally important to the overall photoelectrochemical water splitting to produce hydrogen. In this work, bismuth oxyiodide (BiOI), iron-modified bismuth iodide Fe/BiOI, and the sulfurized S-Fe/BiOI were prepared using the solvothermal method. The three materials all have good absorption ability for visible light. The photoelectrochemical catalytic activity of BiOI to oxygen evolution reaction (OER) is significantly enhanced after iron modification, while the sulfurized product S-Fe/BiOI exhibits better catalytic activity to hydrogen evolution reaction (HER). Hence, OER and HER can be simultaneously catalyzed by using Fe/BiOI and S-Fe/BiOI as anodic and cathodic catalysts to facilitate the overall photoelectrochemical water splitting process.

Highly porous BiOBr@NU-1000 Z-scheme heterojunctions for synergistic efficient adsorption and photocatalytic degradation of tetracycline

Designing an effective photoactive heterojunction having dual benefits towards photoenergy conversion and pollutant adsorption is regarded as an affordable, green method for eliminating tetracycline (TC) from wastewater. In this regard, a series of BiOBr@NU-1000 (BNU-X, X = 1, 2 and 3) heterojunction photocatalysts are constructed. BNU-X preserves the original skeleton structure of the parent NU-1000, and its high porosity and specific surface area enable superior TC adsorption. At the same time, BNU-X is an effective Z-scheme photocatalyst that improves light trapping, promotes photoelectron-hole separation, and shows excellent photocatalytic degradation efficiency towards TC with the value of the photodegradation kinetic rate constant k being 2.2 and 24.8 times those of NU-1000 and BiOBr, respectively. The significant increase in the photocatalytic activity is ascribed to the construction of an efficient Z-scheme photocatalyst, which promotes the formation of superoxide radicals (˙O2-) and singlet oxygen (1O2) as the main oxidative species in the oxidation system. This research has the advantage of possibilities for the development of porous Z-scheme photocatalysts based on photoactive MOF materials and inorganic semiconductors for the self-purification and photodegradation of organic contaminants.

Metal-organic frameworks in photocatalytic Z-scheme heterojunctions: an emerging technology

There is an urgent need for cleaner production processes for chemicals. An efficient and promising alternative for such reactions is heterogeneous photocatalysis, which works on the principle of converting (visible) light, including solar energy, into chemical energy. To that end, properly designed semiconductor based photocatalysts are necessary to trigger the photocatalytic reactions. Many commonly used photocatalysts have too large bandgaps (3-3.4 eV) to use visible light and a too low surface area for efficient production. Metal-organic frameworks (MOFs) have emerged as an encouraging class of materials for photocatalytic applications due to their (i) large surface area and porosity that facilitate adsorption towards chemicals, (ii) tunable crystallinity and optical and electronic properties for efficient light absorption in the visible region, (iii) tunable composition and functionality that make them versatile photocatalysts for a wide range of reactions, and (iv) facile development of composites with other semiconductors to produce Z-scheme heterojunctions that can effectively suppress the recombination of photogenerated charges. Ongoing research has started focusing on the judicious construction of Z-scheme heterojunctions in MOFs, to mimic natural photosynthesis, such that the MOF photocatalysts have higher light harvesting capacity, spatially separated reductive and oxidative active sites, and well-preserved redox ability. This review provides a concise compilation of the recent progress in the development and applications of MOF-based Z-scheme photocatalysts, their advanced characterization, and future perspectives for further advancements.

Response mechanism of Chlamydomonas reinhardtii to nanoscale bismuth oxyiodide (nano-BiOI): Integrating analysis of mineral nutrient metabolism and metabolomics

Nanoscale bismuth oxyiodide (nano-BiOI) is widely studied and applied in environmental applications and biomedical fields, with the consequence that it may be deposited into aquatic environments. However, the impact of nano-BiOI on aquatic ecosystems, especially freshwater microalga, remains limited. Herein, the nano-BiOI was synthesized and its response mechanism towards microalga Chlamydomonas reinhardtii was evaluated. Results showed that a low concentration of nano-BiOI (5 mg/L) could stimulate algal growth at the early stage of stress. With the increase in concentration, the growth rate of algal cells was inhibited and showed a dose effect. Intracellular reactive oxygen species (ROS) were significantly induced and accompanied by enhanced lipid peroxidation, decreased nonspecific esterase activity, and significantly upregulated glutathione S-transferase activity (GST) activity. Mineral nutrient metabolism analysis showed that nano-BiOI significantly interfered with the mineral nutrients of the algae. Non-targeted metabolomics identified 35 different metabolites (DEMs, 22 upregulated, and 13 downregulated) under 100 mg/L BiOI stress. Metabolic pathway analysis demonstrated that a high concentration of nano-BiOI significantly induced metabolic pathways related to amino acid biosynthesis, lipid biosynthesis, and glutathione biosynthesis, and significantly inhibited the sterol biosynthesis pathway. This finding will contribute to understanding the toxicological mechanisms of nano-BiOI on C. reinhardtii.

In situ photodeposition of platinum clusters on a covalent organic framework for photocatalytic hydrogen production

Photocatalytic hydrogen production has been considered a promising approach to obtain green hydrogen energy. Crystalline porous materials have arisen as key photocatalysts for efficient hydrogen production. Here, we report a strategy to in situ photodeposit platinum clusters as cocatalyst on a covalent organic framework, which makes it an efficient photocatalyst for light-driven hydrogen evolution. Periodically dispersed adsorption sites of platinum species are constructed by introducing adjacent hydroxyl group and imine-N in the region of the covalent organic framework structural unit where photogenerated electrons converge, leading to the in situ reduction of the adsorbed platinum species into metal clusters by photogenerated electrons. The widespread platinum clusters on the covalent organic framework expose large active surface and greatly facilitate the electron transfer, finally contributing to a high photocatalytic hydrogen evolution rate of 42432 μmol g⁻¹ h⁻¹ at 1 wt% platinum loading. This work provides a direction for structural design on covalent organic frameworks to precisely manipulate cocatalyst morphologies and positions at the atomic level for developing efficient photocatalysts.

Porous covalent organic frameworks have arisen as tunable photocatalysts for H₂ production. Here, authors report frameworks engineered with co-catalyst binding sites to improve photocatalytic H₂ evolution performances.

An ab initio study of two-dimensional anisotropic monolayers ScXY (X = S and Se; Y = Cl and Br) for photocatalytic water splitting applications with high carrier mobilities

Recently, metal oxyhalides have been broadly studied due to their hierarchical structures and promising functionalities. Herein, a thorough study of newly modeled monolayers ScXY (X = S and Se; Y = Cl and Br), a class of derivates of ScOBr monolayers, was conducted using first-principles calculations. We theoretically confirm that these ScXY monolayers are mechanically, dynamically, and thermally stable. Young's modulus and Poisson's ratio calculated for all these ScXY monolayers obviously exhibit anisotropic properties. All these monolayers are indirect-gap semiconductors with bandgaps in the range of 2.35-3.18 eV, and their conduction band minimum (CBM) and valence band maximum (VBM) can straddle the reduction and oxidation potential of water very well, respectively. Particularly, ScSeCl and ScSeBr monolayers have the most propitious bandgaps and band alignments to be used as promising photocatalysts, and the predicted carrier mobility is much larger than that of many other two-dimensional materials. Moreover, the predicted anisotropic carrier mobilities and indirect bandgaps will diminish the recombination and facilitate the migration of photo-generated electron and hole pairs. Moreover, biaxial strain (-5% to 5%) effects on the band alignments and bandgaps are discussed. Our findings highlight that ScSeCl and ScSeBr monolayers are envisioned to act as promising photocatalytic and photoelectronic materials with anisotropic ultrahigh carrier mobilities.

Robust direct Z-scheme exciton transfer dynamics by architecting 3D BiOI MF-supported non-stoichiometric Cu0.75In0.25S NC nanocomposite for co-catalyst-free photocatalytic hydrogen evolution

Designing promising photocatalytic systems with wide photon absorption and better exciton separation ability is a cutting-edge technology for enhanced solar-light-driven hydrogen production. In this context, non-stoichiometric Cu0.75In0.25S nanocrystals (CIS NCs) coupled with three-dimensional (3D) BiOI micro-flowers (BOI MFs) were synthesized through an ultra-sonication strategy forming a CIS-BOI heterojunction, which was well supported by XRD, photocurrent, XPS and Mott-Schottky analyses. Further, the co-catalyst-free CIS-BOI binary hybrid shows improved hydrogen evolution, i.e., 588.72 μmol h-1, which is 3.2 times greater than the pristine CIS NC (183.97 μmol h-1). Additionally, the binary composite confers an apparent conversion efficiency (ACE) of 9.44% (8.90 × 1016 number of H2 molecule per sec), which is extensively attributed to the robust charge carrier separation and transfer efficiency via the direct Z-scheme mechanism (proved through superoxide and H2 evolution activity). Moreover, the broad photon absorption range and productive exciton separation over the CIS-BOI composite are substantially justified by UV-Vis DRS, PL, EIS and photocurrent measurements.

Facet-engineering of NH2-UiO-66 with enhanced photocatalytic hydrogen production performance

Sluggish charge transfer is the major problem which restricts the development of metal-organic framework (MOF)-based photocatalysts. Recently, facet-engineering has been proven to be an effective method for solving this issue. However, due to difficulties in regulating the exposed facets of MOFs, there are few reports about the facet-engineering of MOF-based photocatalysts. Here, we firstly report facet-engineering for promoting the photocatalytic activity of NH₂-UiO-66 crystals. In this study, by regulating the influence of kinetics and thermodynamics, cubic, tetra-decahedral, and octahedral forms of NH₂-UiO-66 are synthesized. The photocatalytic hydrogen evolution rate of tetra-decahedral NH₂-UiO-66 with co-exposed (100) and (111) crystal facets reaches 64.06 μmol g^-1 h^-1, which is approximately 2 and 1.5 times greater than that of the cubic and octahedral forms of NH₂-UiO-66, respectively. The density functional theory (DFT) calculation and ultrafast spectroscopy results indicate that a slight staggering exists in the band structure of (100) and (111) facets, causing the facets junction to appear. The facet junction promotes the charge separation efficiency and prolongs the lifetime of the charge carriers, thereby giving tetra-decahedral NH₂-UiO-66 optimal photocatalytic performance. This study demonstrates the feasibility and potential of facet-engineering for photocatalytic applications of MOFs.

Z-Scheme In2 S3 /NU-1000 Heterojunction for Boosting Photo-Oxidation of Sulfide into Sulfoxide under Ambient Conditions

Photocatalytic oxidation of sulfide into sulfoxide has attracted extensive attention as an environmentally friendly strategy for chemical transformations or toxic chemicals degradation. Herein, we construct a series of In₂ S₃ /NU-1000 heterojunction photocatalysts, which can efficiently catalyze the oxidation of sulfides to form sulfoxides as the sole product under LED lamp (full-spectrum) illumination in air at room temperature. Especially, the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES), can also be photocatalytically oxidized with In₂ S₃ /NU-1000 to afford nontoxic 2-chloroethyl ethyl sulfoxide (CEESO) selectively and effectively. In contrast, individual NU-1000 and In₂ S₃ show very low catalytic activity on this reaction. The significantly improved photocatalytic activity is ascribed to the constructing of an efficient Z-scheme photocatalysts In₂ S₃ /NU-1000, which exhibits the enhancement of light harvesting, the promotion of photogenerated electron-hole separation, and the retention of high porosity of the parent MOF. Moreover, mechanism studies in photocatalytic oxidation reveal that the superoxide radical (^. O₂ ^- ) and singlet oxygen (¹ O₂ ) are the main oxidative species in the oxidation system. This work exploits the opportunities for the construction of porous Z-scheme photocatalysts based on the photoactive MOFs materials and inorganic semiconductors for promoting catalytic organic transformations. More importantly, it provides a route to the rational design of efficient photocatalysts for the detoxification of mustard gas.

Magnetically Recyclable Fe3O4@TMU-32 Metal-Organic Framework Photocatalyst for Tetracycline Degradation Under Visible Light

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials being used as photocatalysts for efficient pollutant removal and environmental remediation. In this study, the TMU-32 MOF was synthesized as an effective photocatalyst for the photodegradation of tetracycline (TC) with 96% efficiency in 60 min under visible light. The high photocatalytic activity of the TMU-32 MOF is mainly due to its large specific surface area, which is beneficial for promoting both the adsorption of TC and the separation of the photoinduced charges. Moreover, its desired crystallinity makes it a semiconductor with an appropriate band gap energy. Next, a composite of the TMU-32 MOF with Fe₃O₄ nanoparticles (as Fe₃O₄@TMU-32) was prepared as a magnetically recyclable photocatalyst. The results showed that the photocatalytic activity of the Fe₃O₄@TMU-32 nanocomposite is slightly lower (68% degradation of TC within 60 min) than that of TMU-32 toward TC degradation since Fe₃O₄ nanoparticles are not acting as a photocatalyst and are used only to make the host photocatalyst (here, TMU-32) magnetically separable. The effects of the photocatalyst concentration and recyclability on the photodegradation of TC were studied under similar conditions. We found that the Fe₃O₄@TMU-32 composite is easily recycled without a significant loss of photocatalytic activity after being used several times, indicating the stability of the photocatalyst. Finally, a density functional theory study was also conducted to investigate the structural and electronic properties such as the band gap energy and density of states of the TMU-32 MOF and the Fe₃O₄@TMU-32 composite. Our computational results are in good agreement with the experimental ones. A photocatalytic degradation mechanism was finally proposed under visible-light photoirradiation.

Amino-functionalized Ti-metal-organic framework decorated BiOI sphere for simultaneous elimination of Cr(VI) and tetracycline

A subtle flower-like MIL-125-NH₂@BiOI was fabricated by a facile solvothermal method for simultaneously eliminating Cr(VI)/tetracycline mixed pollutants under visible light. The strong interaction between amino in MIL-125-NH₂ and Bi³⁺ of BiOI promotes the formation of this unique inlaid structure and enables the favorable contact between MIL-125-NH₂ and BiOI, thus accelerating the transfer of charge carriers. Remarkably, MIL-125-NH₂@BiOI displays a superior activity compared with that of two monomers for the photocatalytic reduction of Cr(VI) and degradation of tetracycline. More significantly, the photocatalytic efficiency can be further boosted in the coexistence of Cr(VI) and tetracycline, which is 1.8 and 1.6 times that of single Cr(VI) and tetracycline, respectively. The synergistic effect between Cr(VI) reduction and tetracycline oxidative degradation can further facilitate the separation of photo-induced electrons and holes, resulting in the improved efficiencies in the Cr(VI)/tetracycline coexistent environment. This work sheds light on that MOF-based photocatalysts possess huge potential for practical environmental remediation.

Phase transformation and heterojunction construction of bismuth oxyiodides by grinding-assisted calcination in the presence of thiourea and their photoactivity

Bismuth-rich oxyhalides are promising photocatalysts due to their special layered structure and adjustable band gap energy. In this work, a series of bismuth oxyiodides were fabricated by grinding-assisted calcination in the presence of thiourea, where grinding-induced mechanical force could accelerate the decomposition reaction and thiourea could prohibit the crystal particles from growing due to coordination action. The combined effect of grinding and thiourea could decrease the temperature of phase transformation of bismuth oxyiodides. Among these, heterojunction Bi4O5I2/Bi5O7I containing uniform flower-like microspheres assembled by ultra-thin nanosheets exhibited the highest photocatalytic activity and favorable stability for the degradation of the antibiotic tetracycline under visible light irradiation. This work could provide a good reference for the design of bismuth-rich oxyhalide heterojunction for photocatalytic applications.

Five compounds based on [TeMo6O24]6− and [β-Mo8O26]4− anions synthesized by using different symmetrical and asymmetric N-donor ligands

A series of POM-based compounds can be used as amperometric detectors and the compounds based on [β-Mo₈O₂₆]⁴⁻ can not only detect the cation Cr(vi), but also can photocatalytically reduce Cr(vi).