Nanocage-Based N-Rich Metal–Organic Framework for Luminescence Sensing toward Fe3+ and Cu2+ Ions

Mixed N,O-donor Directed Blue Emissive Nano-dispersed Mesoporous Mn(II)-MOF: Dual Sensing Probe for Recyclable and Ultrasensitive ppb-Level Recognition of TNP and Cr(VI)-Oxoanions

A new mesoporous Mn(II)-MOF [Mn2(phen)2(nia)2]∞ with 4-c uninodal net topology and reiterating rectangular channels in its cargo-net like extension was synthesized using π-conjugated phenanthroline (phen) and syn-syn bridging 5-nitroisopthalic acid (nia) linkers. The MOF (1) exhibited phase purity, uniform morphology, photo and thermal stability, and robustness; duly triggered by the exceptional framework rigidity via intermolecular H-bonding and interlayer π-π stacking interactions. The bright-blue luminescence of the MOF nano-dispersion was explored for sensitive, specific and ultrafast detection of trinitrophenol (TNP) with extremely low LOD (90.62 nM), high KSV (18.27×104 M-1) and Kq (4×1014 M-1s-1). The vapor-phase TNP sensing was also accomplished. Additionally, 1 served towards discriminatory, aqueous-phase monitoring of Cr(VI)-oxoanions, depicting LODs: 36.08 and 35.70 ppb; KSV: 3.46×104 and 4.87×104 M-1; Kq: 3.26×1013 M-1s-1 and 4.31×1013 M-1s-1; and response time: 32 and 40s for CrO4 2- and Cr2O7 2- respectively. The quenching mechanisms (i. e., RET, PET, IFE, weak interactions, collisional quenching and π⋅⋅⋅π stacking) was explained from several experimental investigations and theoretical DFT calculations. The recyclable sensing events and quantification from complex environmental matrices with admirable recovery rates and high KSV (13.02-22.44×104; ~6.31-10.98×104 and ~6.60-11.42×104 M-1 for TNP, CrO4 2- and Cr2O7 2-) undoubtedly advocated the consistency of the probe.

Two isostructural Zn/Co-MOFs with penetrating structures: multifunctional properties of both luminescence sensing and conversion of CO2 into cyclic carbonates

Two new metal-organic frameworks (MOFs), namely, {[Zn(HL)(bpea)]·DMF}n (Zn-MOF-1) and {[Co(HL)(bpea)]·DMF}n (Co-MOF-2) (H3L = 3-(3,5-dicarboxybenzyloxy)benzoic acid, bpea = 1,2-di(pyridyl)ethane), were obtained by the reaction of H3L and N-containing ligand bpea with Zn(NO3)2·6H2O and Co(NO3)2·6H2O, respectively. The isomorphic Zn-MOF-1 and Co-MOF-2 featured a 3D penetrating framework with different stabilities, luminescence, and catalytic properties. Luminescence measurement indicated that Zn-MOF-1 could be used to detect Al3+ through a turn-on effect with a detection limit of 0.42 μM. The sensing mechanism experiments showed that the enhanced luminescence of Zn-MOF-1 toward Al3+ may be due to the weak interaction between Al3+ and Zn-MOF-1 and the absorbance-caused enhancement (ACE) mechanism. Meanwhile, both Zn-MOF-1 and Co-MOF-2 showed interesting CO2 adsorption properties and could catalyze the cycloaddition of CO2 to epoxides resulting in 96 and 92% ideal products within 12 hours, respectively. They can be cycled up to 5 times without significant loss of catalytic efficiency.

A new dual-ligand DUT-52-type metal-organic framework for ratiometric luminescence detection of aqueous-phase Cu2+ and Cr2O72

Metal-organic frameworks (MOFs) are a unique class of multifunctional hybrid crystals that have been successfully utilized in diverse ranges of applications. However, since MOFs are prone to aqueous degradation, the development of stable luminescent MOF platforms in aqueous media is still a huge challenge. Here, a novel dual-ligand Eu³⁺/DUT-52-COOH composite is prepared based on the luminescent DUT-52 prototype structure via a dual-ligand strategy and a post-synthetic modification (PSM) method. The functionalized Eu³⁺/DUT-52-COOH material exhibits dual emission and good photothermal stability in aqueous media. Thus, Eu³⁺/DUT-52-COOH is developed as a ratiometric luminescent sensor to achieve highly selective and sensitive detection of Cu²⁺ and Cr₂O₇^2- in aqueous solutions and has a low detection limit of 3.43 μM and 25.7 nM, respectively. This work is one of the few cases of detecting Cu²⁺ and Cr₂O₇^2- in aqueous media based on a DUT-52, and the detection signals can be observed by the bare eye without using sophisticated analytical instruments. The possible sensing mechanism is discussed in detail. The results obtained in this project may provide broad prospects for developing smart sensing systems to accomplish highly efficient, easily operable and quantitative intelligent recognition of Cu²⁺ and Cr₂O₇^2-.

Zn(II)-Based Mixed-Ligand-Bearing Coordination Polymers as Multi-Responsive Fluorescent Sensors for Detecting Dichromate, Iodide, Nitenpyram, and Imidacloprid

Coordination polymers (CPs) are organo-inorganic porous materials consisting of metal ions or clusters and organic linkers. These compounds have attracted attention for use in the fluorescence detection of pollutants. Here, two Zn-based mixed-ligand-bearing CPs, [Zn₂(DIN)₂(HBTC^2-)₂] (CP-1) and [Zn(DIN)(HBTC^2-)]·ACN·H₂O (CP-2) (DIN = 1,4-di(imidazole-1-yl)naphthalene, H₃BTC = 1,3,5-benzenetricarboxylic acid, and ACN = acetonitrile), were synthesized under solvothermal conditions. CP-1 and CP-2 were characterized by single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and powder X-ray diffraction analysis. Solid-state fluorescence analysis revealed an emission peak at 350 nm upon excitation at 225 and 290 nm. Fluorescence sensing tests showed that CP-1 was highly efficient, sensitive, and selective for detecting Cr₂O₇^2- at 225 and 290 nm, whereas I^- was only detected well at an excitation of 225 nm. CP-1 detected pesticides differently at excitation wavelengths of 225 and 290 nm; the highest quenching rates were for nitenpyram at 225 nm and imidacloprid at 290 nm. The quenching process may occur via the inner filter effect and fluorescence resonance energy transfer.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

Detection Enhancement of One Multifunctional Cd-Metal-Organic Framework toward Tetracycline Antibiotics by Simply Mixing Eu3+ in Suspension

It is necessary to find more simple methods to improve the detection selectivity and sensitivity of antibiotics. Herein, we constructed a novel three-dimensional (3D) Cd-MOF LCU-117 assembled from p-terphenyl-4,2″,5″,4'-tetracarboxylic acid, which showed a special 3D helical structure with carboxylic acid ligands and nitrogen-containing ligands crossing each other vertically. Luminescence measurements indicated that LCU-117 has high selectivity and sensitivity toward Eu³⁺ through the ratiometric effect. Meanwhile, this complex itself could detect antibiotics oxytetracycline (OTC) through the turn-off mechanism. When Eu³⁺ was added in suspensions of LCU-117 (noted as Eu³⁺@LCU-117), the detection toward OTC was enhanced significantly and visually. The sensing mechanism was investigated in detail by various measurements and theoretical calculations. LCU-117 has a good effect on the logic gate, potential fingerprint detection, and mixed-matrix membranes (MMMs). The practical application for monitoring OTC in water samples also provided a satisfactory result.

Two Co-Based Metal-Organic Framework Isomers with Similar Metal-Carboxylate Sheets: Turn-On Ratiometric Luminescence Sensing Activities toward Biomarker N-Acetylneuraminic Acid and Discrimination of Ga3+ and In3

Two supramolecular Co-MOF isomers, namely, {[Co(L)_0.5(m-bimb)]·3H₂O}_n (LCU-115) and {[Co(L)_0.5(p-bimb)]·3H₂O}_n (LCU-116), were synthesized from an amide-containing carboxylic acid N,N″-(3,5-dicarboxylphenyl)benzene-1,4-dicarboxamide (H₄L) and two flexible positional isostructural N-containing ligands m-bimb and p-bimb (m-bimb = 1,3-bis((1H-imidazol-1-yl)methyl)benzene; p-bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene). The carboxylate ligands connect Co(II) centers to form 2D metal-carboxylate sheets, which are extended further by m-bimb and p-bimb to form a 2D bilayer with parallel stacking (LCU-115) and a 3D framework (LCU-116), respectively. Luminescence measurements indicated that these two complexes exhibited interesting multiresponsive sensing activities toward pH, biomarker N-acetylneuraminic acid, and trivalent cations Ga³⁺/In³⁺. They show highly sensitive turn-on fluorescence responses in the acidic range and can also be regarded as on-off-on vapoluminescent sensors to typical acidic and basic gases HCl and Et₃N. It is worth noting that these complexes have excellent turn-on ratiometric fluorescence sensing ability for N-acetylneuraminic acid (NANA) with detection limits as low as 7.39 and 8.06 μM, respectively. Furthermore, they were successfully applied for the detection of NANA in simulated urine and serum samples with satisfactory results. For ion detection, LCU-116 could detect both Ga³⁺ and In³⁺, while LCU-115 could distinguish Ga³⁺ from In³⁺ with the latter showing luminescence quenching. The sensing mechanism was investigated in detail by XRD, UV-vis, EDS, XPS, SEM, and TEM. The results of interday and intraday precision studies gave low RSD values in the range of 1.19-3.53%, ascertaining the reproducibility of these sensors. The recoveries for the sensing analytes in simulated urine/serum or real water are satisfactory from 96.7 to 103.3% (toward NANA) and 96.6 to 115.0% (toward Ga³⁺ and In³⁺), indicating that these two complexes also possess acceptable reliability for monitoring in real samples. The results indicated that the supramolecular isomers LCU-115 and LCU-116 are promising material candidates for application in biological and environmental monitoring.

Explosive and pollutant nitroaromatic sensing through a Cd(II) based ladder shaped 1D coordination polymer

In the existing leanings of environmental and national security issues, establishment of appropriate sensors for explosive as well as pollutant nitroaromatic compounds may be considered as one of the most prodigious job for material researchers. In the current study a new Cd(II) based 1D ladder coordination polymer (CP), [Cd(4-bpd)(3-cbn)₂]_n, has been synthesized and well characterized through single crystal X-ray diffraction analysis. Interestingly, the supramolecular assembly of this compound has efficiently identified 2,4,6-trinitrophenol through fluorescence quenching method. The Stern-Volmer coefficient (K_sv) has been calculated as 6.047 × 10³ M^-1, which can be attributed to the quenching of the emission intensity. The limit of detection (LOD) has been determined as 0.260 μM following the 3σ method along with almost 95% fluorescence intensity reduction. FESEM study revealed that the crystalline nature of the compound has been altered upon interaction with the above mentioned nitroaromatic analyte. Theoretical studies were performed to get the insight idea of fluorescence quenching mechanism which also substantiated the experimental observation. The present study can pave the way for the fabrication of future generation technology in sensor field.

Spin Crossover Induced by Changing the Identity of the Secondary Metal Ion from PdII to NiII in a Face-Centered FeII 8 MII 6 Cubic Cage

Discrete spin crossover (SCO) heteronuclear cages are a rare class of materials which have potential use in next-generation molecular transport and catalysis. Previous investigations of cubic cage [Fe₈ Pd₆ L₈ ]²⁸⁺ constructed using semi-rigid metalloligands, found that Fe^II centers of the cage did not undergo spin transition. In this work, substitution of the secondary metal center at the face of the cage resulted in SCO behavior, evidenced by magnetic susceptibility, Mössbauer spectroscopy and single crystal X-ray diffraction. Structural comparisons of these two cages shed light on the possible interplay of inter- and intramolecular interactions associated with SCO in the Ni^II analogue, 1 ([Fe₈ Ni₆ L₈ (CH₃ CN)₁₂ ]²⁸⁺ ). The distorted octahedral coordination environment, as well as the occupation of the CH₃ CN in the Ni^II axial positions of 1, prevented close packing of cages observed in the Pd^II analogue. This led to offset, distant packing arrangements whereby important areas within the cage underwent dramatic structural changes with the exhibition of SCO.

Complementarity and Preorganisation in the Assembly of Heterometallic–Organic Cages via the Metalloligand Approach—Recent Advances

The design of new metallocage polyhedra towards pre-determined structures can offer both practical as well as intellectual challenges. In this mini-review we discuss a selection of recent examples in which the use of the metalloligand approach has been employed to overcome such challenges. An attractive feature of this approach is its stepwise nature that lends itself to the design and rational synthesis of heterometallic metal–organic cages, with the latter often associated with enhanced functionality.

Blue-Emitting Ligand-Mediated Assembly of Rare-Earth MOFs toward White-Light Emission, Sensing, Magnetic, and Catalytic Studies

New lanthanide carboxylate compounds with two- (2D) and three-dimensional (3D) structures have been prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as an organic linker. The compounds, [Ln(C₁₄H₈O₆)(C₇O₃H₄)·2H₂O]·4(H₂O), Ln = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy and [Ln(C₇O₃H₄)₃·(C₃H₇ON)·(H₂O)]·2(H₂O)(C₃H₇NO), Ln = La, Ce, Pr, have two- and three-dimensional structures, respectively. In all compounds, lanthanide ions are connected together, forming a dimer, which is connected by the 2,5-BPTA ligand. In the two-dimensional structure, there are two 2,5-BPTA moieties present, and in the three-dimensional structure, there are three 2,5-BPTA moieties present. The lanthanide centers are nine-coordinated, the 2D structure has a tricapped trigonal prismatic arrangement, and the 3D structure has a monocapped distorted square antiprismatic arrangement. The Pr compound forms in both 2D and 3D structures, whose formation depends on the time of the reaction (2 days─2D and 5-6 days─3D). The ligand emits in the blue region, and using the characteristic emission of Eu³⁺ (red) and Tb³⁺ (green) ions, we achieve white light emission in the (Y_0.96Tb_0.02Eu_0.02) compound. The overall quantum yield for the white light emission is 28%. The strong green luminescence of the Tb³⁺-containing compound was employed to selectively sense the Cr³⁺ and Fe³⁺ ions in aqueous solution with limits of detection (LODs) at 0.41 and 8.6 ppm, respectively. The Tb compound was found to be a good heterogeneous catalyst for the Ullman-type O-arylation reaction between phenol and bromoarene with yields of 95%. Magnetic studies on the Gd-, Tb-, and Dy-containing compounds showed weak exchange interactions within the dimeric Ln₂ units. The present work demonstrates the many utilities of the rare-earth-containing MOFs, especially toward white-light emission, metal-ion sensing, and heterogeneous catalysis.

Series of TM-OFs as a Platform for Efficient Catalysis and Multifunctional Luminescence Sensing

Three novel porous transition-metal-organic frameworks (TM-OFs), formulated as [Co₃(DCPN)₂(μ₂-OH₂)₄(H₂O)₄](DMF)₂ (1), [Cd₃(DCPN)₂(μ₂-OH₂)₄(H₂O)₄](DMF)₂ (2), and [CdK(DCPN)(DMA)] (3), have been successfully prepared via solvothermal conditions based on a 5-(3',6'-dicarboxylic phenyl) nicotinic carboxylic acid (H₃DCPN) ligand. 1 and 2 both have the same porous 3D network structure with the point symbol of {4¹⁰·6¹⁴·8⁴}·{4⁵·6}₂ based on trinuclear ({Co₃} or {Cd₃}) clusters, indicating a one-dimensional porous channel, and possess excellent water and thermal stability; 3 also displays a porous 3D network structure with a 4-connected sra topology based on the heteronuclear metal cluster {CdK}. Complex 1 can be used to load Pd nanoparticles (Pd NPs) via a wetness impregnation strategy to obtain Pd@1. The reduction of nitrophenols (2-NP, 3-NP, 4-NP) by Pd@1 in aqueous solution shows outstanding conversion, excellent rate constants (k), and remarkable cycling stability due to the synergistic effect of complex 1 and Pd NPs. Luminescence sensing tests confirmed that 2 is a reliable multifunctional chemical sensor with high selectivity and sensitivity for low concentrations of Fe³⁺, Cr₂O₇^2-, CPFX, and NFX. Specifically, 2 shows a fluorescence enhancement behavior toward fluoroquinolone antibiotics (CPFX and NFX), which has not been reported previously in the literature. Moreover, the rational mechanism of fluorescence sensing was also systematically investigated by various detection means and theoretical calculations.

Interpenetrated N-rich MOF derived vesicular N-doped carbon for high performance lithium ion battery

High-performance lithium ion batteries (LIBs) juggling high reversible capacity, excellent rate capability and ultralong cycle stability are urgently needed for all electronic devices. Here we report employing a vesicle-like porous N-doped carbon material (abbr. N/C-900) as a highly active anode for LIBs to balance high capacity, high rate and long life. The N/C-900 material was fabricated by pyrolysis of a designed crystal MOF LCU-104, which exhibits a graceful two-fold interpenetrating structural feature of N-rich nanocages {Zn₆(dttz)₄} linked through an N-donor ligand bpp (H₃dttz = 4,5-di(1H-tetrazol-5-yl)-2H-1,2,3-triazole, bpp = 1,3-bis(4-pyridyl)propane). The features of LCU-104 combine high N content (35.1%), interpenetration, and explosive characteristics, which endow the derived N/C material with optimized N-doping for tuning its chemical and electronic structure, a suitably thicker wall to enhance its stability, and a vesicle-like structure to improve its porosity. As an anode material for LIBs, N/C-900 delivers a highly reversible capacity of ca. 734 mA h g^-1 at a large current density of 1 A g^-1 until the 2000th cycle, revealing its ultralong cycle stability and excellent rate capability. The unique structure and preferential interaction between abundant pyridinic N active sites and Li atoms are responsible for the improved excellent lithium storage capacity and durability performances of the anode according to analysis of the results of computational modeling.

Two Multiresponsive Luminescent Zn-MOFs for the Detection of Different Chemicals in Simulated Urine and Antibiotics/Cations/Anions in Aqueous Media

Two Zn-MOFs, namely, {[Zn(L)_0.5(bpea)]·0.5H₂O·0.5DMF}_n [LCU-113 (for Liaocheng University)] and {[Zn(L)_0.5(ibpt)]·H₂O·DMF}_n (LCU-114), were synthesized based on flexible tetracarboxylic acid 1,3-bis(3,5-dicarboxyphenoxy)benzene (H₄L) and different N-ligands [bpea = 1,2-dipyridyl ethane; ibpt = 3-(4'-imidazolobenzene)-5-(pyridine-4'-yl)-1,2,4-triazole]. LCU-113 and LCU-114 possess twofold interpenetrating three-dimensional pillared layer structures, in which a two-dimensional layer formed by carboxylic acid and Zn²⁺ ions was pillared by bpea and ibpt, respectively. The two complexes show high water stability and high luminescence sensing performance toward organic solvents, ions, and antibiotics, as well as chemicals, in simulated urine. The investigation showed that (1) LCU-113 and LCU-114 could detect uric acid (UA, 2,6,8-trihydroxypurine, metabolite of purine) and p-aminophenol (PAP, biomarker of phenamine) in simulated urine by luminescence quenching, respectively, and (2) luminescence quenching of LCU-113 and LCU-114 occurred in aqueous solutions of nitrofurazone (NZF), Fe³⁺, and CrO₄^2-/Cr₂O₇^2-. All the above detections have excellent anti-interference ability and recyclability. The luminescence mechanism analysis indicates that weak interactions between the framework structures and the target analytes as well as the energy competition (inner filter effect) play an important role in sensing the above analytes. The practical application for monitoring NZF/Fe³⁺ in water samples was also tested.

Unfolding the Role of Building Units of MOFs with Mechanistic Insight Towards Selective Metal Ions Detection in Water

The potential emergence of fluorescence-based techniques has propelled research towards developing probes that can sense trace metal ions specifically. Although luminescent metal-organic frameworks (MOFs) are well suited for this application, the role of building blocks towards detection is not fully understood. In this work, a systematic screening by varying number of Lewis basic (pyridyl-N atoms) sites is carried out in a series of isostructural, robust UiO-67 MOFs, and targeting a model metal ion-Fe³⁺ . All the three fluorescent MOFs are seen to present quenching response towards Fe³⁺ ions in water. However, UiO-67@N exhibits highly selective and sensitive response, whereas emission of both UiO-67 and UiO-67@NN is quenched by several metal ions. Detailed experimental and theoretical mechanistic investigation is carried out in addition to demonstration of UiO-67@N being able to sense trace amount of Fe³⁺ ions in synthetic biological water sample. Further, UiO-67@N based mixed-matrix membrane (MMM) has been prepared and employed to mimic the real time Fe³⁺ ions detection in water.

Lanthanide ternary mixed-ligand coordination polymers as fluorescent sensors for the sensitive and selective detection of chlorogenic acid

A series of lanthanide coordination polymers constructed from ternary mixed ligands were synthesized. The Eu-CP has fluorescence sensing properties for chlorogenic acid. The film loaded with Eu-CP can be used for visual fluorescence detection.

A layered Mn-based coordination polymer as an efficient heterogeneous catalyst for CO2 cycloaddition under mild conditions

A layered coordination polymer has been constructed by using a semi-rigid ligand, exhibiting a robust catalytic activity toward the cycloaddition of CO2 with epoxides.

Selective luminescent sensing of metal ions and nitroaromatics over a porous mixed-linker cadmium(ii) based metal–organic framework

A potential luminescent sensor based on porous metal organic framework for the detection of metal ions (Al3+, Fe3+ or Cr3+) and nitro-explosive, 2,4,6-tri-nitrophenol has been discovered. MOF is capable of detecting aqueous phase analyte through luminescent sensing.

Fluorescence detection of malachite green and cations (Cr3+, Fe3+ and Cu2+) by a europium-based coordination polymer

A europium-based CP fluorescent sensor was synthesized and exhibited excellent recognition ability for malachite green (MG) and metal cations (Cr3+, Fe3+ and Cu2+).

Preparation of Eu0.075Tb0.925-Metal Organic Framework as a Fluorescent Probe and Application in the Detection of Fe3+ and Cr2O72

Luminescent Ln-MOFs (Eu0.075Tb0.925-MOF) were successfully synthesised through the solvothermal reaction of Tb(NO3)3·6H2O, Eu(NO3)3·6H2O, and the ligand pyromellitic acid. The product was characterised by X-ray diffraction (XRD), TG analysis, EM, X-ray photoelectron spectroscopy (XPS), and luminescence properties, and results show that the synthesised material Eu0.075Tb0.925-MOF has a selective ratio-based fluorescence response to Fe3+ or Cr2O72-. On the basis of the internal filtering effect, the fluorescence detection experiment shows that as the concentration of Fe3+ or Cr2O72- increases, the intensity of the characteristic emission peak at 544 nm of Tb3+ decreases, and the intensity of the characteristic emission peak at 653 nm of Eu3+ increases in Eu0.075Tb0.925-MOF. The fluorescence intensity ratio (I653/I544) has a good linear relationship with the target concentration. The detection linear range for Fe3+ or Cr2O72- is 10-100 μM/L, and the detection limits are 2.71 × 10-7 and 8.72 × 10-7 M, respectively. Compared with the sensor material with a single fluorescence emission, the synthesised material has a higher anti-interference ability. The synthesised Eu0.075Tb0.925-MOF can be used as a highly selective and recyclable sensing material for Fe3+ or Cr2O72-. This material should be an excellent candidate for multifunctional sensors.

Recent advances in molecular logic gate chemosensors based on luminescent metal organic frameworks

Luminescent metal-organic frameworks (LMOFs) as chemosensors, can sense various analytes, such as heavy metal ions, antibiotics, pesticides, and small biological molecules. Based on the fluorescence characteristics of LMOFs, a variety of logic gates have been developed. In this review, we mainly discuss some common logic systems based on LMOFs, and then summarize the strategies of constructing logic gates from two perspectives. One is based on superior characteristics of MOFs, which can be synthesized from Ln³⁺ based MOFs (Ln-MOFs) or form hybrids by encapsulating different materials, including metal ions, dyes, and quantum dots (QDs). The other is to control the presence of inputs by reactions between different reactants and then further control switches of logic gates. Additionally, the common sensing mechanisms of LMOFs in logic gates are discussed. In the end, we have envisioned MOFs that possess a promising future in logic computing areas.