Self-Interpenetrated Water-Stable Microporous Metal-Organic Framework toward Storage and Purification of Light Hydrocarbons

Three Robust Isoreticular Metal-Organic Frameworks with High-Performance Selective CO2 Capture and Separation

Based on the hard-soft acid base (HSAB) theory, three robust isoreticular metal-organic frameworks (MOFs) with nia topology were successfully synthesized by solvothermal reaction {[In3O(BHB)(H2O)3]NO3·3DMA (JLU-MOF110(In)), [Fe3O(BHB)(H2O)3]NO3 (JLU-MOF110(Fe)), and [Fe2NiO(BHB)(H2O)3] (JLU-MOF110(FeNi)) (DMA = N,N-dimethylacetamide, H6BHB = 4,4″-benzene-1,3,5-triyl-hexabenzoic acid)}. Both JLU-MOF110(In) and JLU-MOF110(Fe) are cationic frameworks, and their BET surface areas are 301 and 446 m2/g, respectively. By modification of the components of metal clusters, JLU-MOF110(FeNi) features a neutral framework, and the BET surface area is increased up to 808 m2/g. All three MOF materials exhibit high chemical and thermal stability. JLU-MOF110(In) remains stable for 24 h at pH values ranging from 1 to 11, while JLU-MOF110(Fe) and JLU-MOF110(FeNi) persist to be stable for 24 h at pH from 1 to 12. JLU-MOF110(In) exhibits thermal stability up to 350 °C, whereas JLU-MOF110(Fe) and JLU-MOF(FeNi) can be stable up to 300 °C. Thanks to the microporous cage-based structure and abundant open metal sites, JLU-MOF110(In), JLU-MOF110(Fe), and JLU-MOF110(FeNi) have excellent CO2 capture capacity (28.0, 51.5, and 99.6 cm3/g, respectively, under 298 K and 1 bar). Interestingly, the ideal adsorption solution theory results show that all three MOFs exhibit high separation selectivity toward CO2 over N2 (35.2, 43.2, and 43.2 for CO2/N2 = 0.15/0.85) and CO2 over CH4 (14.4, 11.5, and 10.1 for CO2/CH4 = 0.5/0.5) at 298 K and 1 bar. Thus, all three MOFs are potential candidates for CO2 capture and separation. Among them, JLU-MOF110(FeNi) displays the best separation potential, as revealed by dynamic column breakthrough experiments.

Theoretical investigation of C1-C4 hydrocarbons adsorption and separation in a porous metallocavitand

The purification of light hydrocarbons is one of the most important chemical processes globally which consumes substantial energy. Porous materials are likely to improve the efficiency of the separation process by acting as regenerable solid adsorbents. To investigate such translational systems, the underlying mechanism of adsorption in the porous materials must be taken into account. Herein we report the adsorption and selective separation of C1-C4 hydrocarbons in the coinage metal-based macrocyclic metallocavitand Pillarplex, which exhibits excellent performance in the adsorption of CH₄ at the ambient conditions with a binding energy of -17.9 kcal mol^-1. In addition, the endohedral adsorption of C2-C4 hydrocarbon is impressive. The CH₄, C₂H₄, C₃H₄, and 1,3-butadiene have potential uptake of 2.57, 4.26, 3.60, and 2.95 mmol g^-1, respectively at ambient conditions are highest from their respective isomers. Selective separation of C1-C4 hydrocarbons is studied using ideal adsorption solution theory demonstrating its potential for one-step purification of C1-C3 hydrocarbons.

The Advanced Synthesis of MOFs-Based Materials in Photocatalytic HER in Recent Three Years

Since the advent of metal–organic frameworks (MOFs), researchers have paid extensive attention to MOFs due to their determined structural composition, controllable pore size, and diverse physical and chemical properties. Photocatalysis, as a significant application of MOFs catalysts, has developed rapidly in recent years and become a research hotspot continuously. Various methods and approaches to construct and modify MOFs and their derivatives can not only affect the structure and morphology, but also largely determine their properties. Herein, we summarize the advanced synthesis of MOFs-based materials in the field of the photocatalytic decomposition of water to produce hydrogen in the recent three years. The main contents include the overview of the novel synthesis strategies in four aspects: internal modification and structure optimization of MOFs materials, MOFs/semiconductor composites, MOFs/COFs-based hybrids, and MOFs-derived materials. In addition, the problems and challenges faced in this direction and the future development goals were also discussed. We hope this review will help deepen the reader’s understanding and promote continued high-quality development in this field.

Luminescence and Preventive Effect of Two New Cd(II) Compounds on Scar Formation after Cosmetic Surgery

Two coordination polymers involving Cd(II), i.e., [Cd2(IDPA)2(bpe) (H2O)2]n·2n(H2O) (1) (H2IDPA is 5-(1-oxoisoindolin-2-yl)isophthalic acid, bpe is 1,2-bis(4-pyridyl)ethane, 4-bpmh is N, N-bis-pyridin-4-ylmethylene-hydrazine), and [Cd(IDPA)(4-bpmh)0.5(H2O)2]n·n(H2O) (2) are prepared under solvothermal conditions via tuning the auxiliary ligand from bpe to 4-bpmh. Moreover, the as-prepared complexes 1–2 reveal much stronger luminescence in contrast to that of the free organic ligands. Their preventive effect and mechanism on scar formation after cosmetic surgery was explored. First, the two complexes’ suppression of the viability of the human immortal keratinocyte line (HaCaT) cell line was examined via exploiting cell counting kit-8 (CCK-8) detection. The vascular endothelial growth factor (VEGF) signal pathway activation in HaCaT cells was detected by real-time reverse transcription-polymerase chain reaction (RT-PCR) assay.

Multifunctional lanthanide MOF luminescent sensor built by structural designing and energy level regulation of a ligand

In order to reduce usage cost and simplify the detection process, it is necessary to develop multifunctional and multi-emitter Ln-MOF luminescent sensors.

A Copper-Based Metal-Organic Framework for C2H2/CO2 Separation

A copper-based metal-organic framework, [Cu₂(PBTDA)(H₂O)₂] (UTSA-98, UTSA = the University of Texas at San Antonio; H₄PBTDA = 5',5''''-(1,4-phenylene)bis([1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid)), has been solvothermally synthesized. The alternative connection of classical dicopper secondary building units and deprotonated four-branched PBTDA^4- ligands led to the formation of the three-dimensional framework of UTSA-98 with one-dimensional rhombic channels. Its guest-free phase, UTSA-98a, uptakes much more C₂H₂ (82.6 cm³/g) than CO₂ (40.3 cm³/g) at 298 K and 100 kPa, resulting in a high adsorption selectivity of 5.2. Furthermore, the efficient separation ability of UTSA-98a toward the C₂H₂/CO₂ gas mixture was further verified by laboratory-scale fixed-bed breakthrough experiments.

Investigation on a Zr-based metal-organic framework (MOF-801) for the high-performance separation of light alkanes

A Zr-based metal-organic framework (MOF-801) with high thermal and chemical stability was prepared by the solvothermal synthesis method. Notably, MOF-801 exhibits a high separation selectivity for C₃H₈/CH₄ and C₂H₆/CH₄, making it a practical material for the storage and purification of light alkanes.

Efficient Cycloaddition of CO2 and Aziridines Activated by a Quadruple-Interpenetrated Indium-Organic Framework as a Recyclable Catalyst

On the basis of the global warming effect, it is of great significance to convert CO₂ into the high value-added products oxazolidinones, but investigations on main-group-based metal-organic frameworks (MOFs) as heterogeneous catalysts still have not been reported so far. In this work, a quadruple-interpenetrated porous indium-based MOF, {[NH₂(CH₃)₂][In(CPT)₂]·3CH₃CN·3DMA}_n (1), is constructed from the organic ligand 3,5-bis(4'-carboxyphenyl)-1,2,4-triazole through solvothermal reactions, and N₂ adsorption proves that the framework has a high Brunauer-Emmett-Teller surface areas with 2024 m²/g. The catalytic research on CO₂ conversion reveals that compound 1 has high reactivity for the cycloaddition of CO₂ with aziridines, and the product 3-ethyl-5-phenyloxazolidin-2-one can be obtained with a yield of 99% under mild conditions. In addition, 1 exhibits excellent activity for different kinds of substrates and can be reused at least five cycles without any significant deactivation, suggesting that 1 is a potential candidate for the chemical conversion of CO₂ and aziridines. Mechanistic explorations indicate that the high efficiency of 1 is attributed to the indium center in the framework as a Lewis acid site, and the large porosity can enrich substrates. Importantly, 1 behaved as the first main-group MOF-based catalyst in the reported coupling reaction of CO₂ with aziridines.

A robust 3D zinc(II)-organic framework for efficient dual detection of acetylacetone and Tb3+ ions

There has been broad attention to the recognition and detection of ions and organic small molecules due to their essential roles in environmental systems. However, dual-functional probes have seldom been developed for sensing organic constituents and lanthanide ions. A new 3D pillared Zn(ii)-organic framework [Zn3(L)(DCTP)3]n (1) (L = 1,4-di(1H-benzo[d]imidazol-2-yl)butane and H2DCTP = 2,5-dichloroterephthalic acid) was hydrothermally synthesized and structurally characterized, and features a unique 3D 4,4,4,6-connected framework containing approximately 9.99 × 9.78 Å2 cubic channels. 1 displays excellent thermal and pH stability and can act as a novel "turn-on" fluorescent probe for highly selectively sensitizing Tb3+ ions through an "antenna effect". Furthermore, 1 is a dual-response fluorescent sensor for monitoring acetylacetone and Tb3+ ions with rapid response times (within 1 min), low limits of detection (LOD) (5.02 × 10-6/1.15 × 10-8 M, separately) and great anti-interference ability and recyclability towards the analytes. The related sensing mechanisms for detecting analytes are also investigated in detail.

Two Cd(ii)-based metal–organic frameworks for the highly effective detection of Fe3+ ions and levofloxacin in aqueous media

Two new Cd(ii)-MOFs are hydrothermally synthesized and can be applied as dual-response sensors to identify Fe3+ and levofloxacin (LVX) with high selectivity, sensitivity and excellent reusability.