Plasmonic Au Nanoparticle@Ti3C2Tx Heterostructures for Improved Oxygen Evolution Performance

Point-of-care testing device platform for the determination of creatinine on an enzyme@CS/PB/MXene@AuNP-based screen-printed carbon electrode

Screen-printed carbon electrodes (SPCE) functionalized with MXene-based three-dimensional nanomaterials are reported for rapid determination of creatinine. Ti3C2TX MXene with in situ reduced AuNPs (MXene@AuNP) were used as a coreactant accelerator for efficient immobilization of enzymes. Creatinine could be oxidized by chitosan-embedded creatinine amidohydrolase, creatine amidinohydrolase, or sarcosine oxidase to generate H2O2, which could be electrochemically detected enhanced by Prussian blue (PB). The enzyme@CS/PB/MXene@AuNP/SPCE detected creatinine within the range 0.03-4.0 mM, with a limit of detection of 0.01 mM, with an average recovery of 96.8-103.7%. This indicates that the proposed biosensor is capable of detecting creatinine in a short amount of time (4 min) within a ± 5% percentage error, in contrast with the standard clinical colorimetric method. With this approach, reproducible and stable electrochemical responses could be achieved for determination of creatinine in serum, urine, or saliva. These results demonstrated its potential for deployment in resource-limited settings for early diagnosis and tracking the progression of chronic kidney disease (CKD).

Commonly Existing Hole-Capturer Organics Adsorption-Induced Recombination over Metal/Semiconductor Perimeters: A Possible Important Factor Affecting Photocatalytic Efficiencies

Photocatalysis is a physiochemical effect arising from the relaxation of photoinduced electrons from the conduction band to the valence band. Controlling the electron relaxation to occur through photocatalytic pathways and prohibiting other relaxations is the main scientific thought for photocatalytic studies. It is needed to know the parallel relaxation pathways that can compete with photocatalytic reactions. By means of in situ photoconductances (PCs) and photoinduced absorptions (PAs), the current research studied the photoinduced electron relaxations of the Au/TiO2 in different atmospheres and at different temperatures. The PC and PA relaxations became different and fast when methanol, ethanol, isopropanol, and acetone were introduced; they also tend to decrease as temperature increases, while that of the undecorated TiO2 in all atmospheres and the Au/TiO2 in pure N2 increased. The results indicated that the organic adsorptions over the Au/TO2 perimeters change the relaxation pathway, and a hole-capturing organics adsorption-induced recombination over the Au/TiO2 perimeter was proposed to explain the relaxations. We found that this relaxation also exists for Ag/TiO2, Pt/TiO2, and Au/ZnO, so it is a commonly existing physical course for the metal/semiconductor (M/S) materials. The effect of the organics and M/S structures on the relaxation was discussed, and the relationship with photocatalytic reactions was also analyzed. Our finding means that blocking this relaxation pathway is an effective way to increase photocatalytic activities, which might open a door for highly active photocatalyst developments.

MXene-based nanomaterials with enzyme-like properties for biomedical applications

Recently, great progress has been made in nanozyme research due to the rapid development of nanomaterials and nanotechnology. MXene-based nanomaterials have gained considerable attention owing to their unique physicochemical properties. They have been found to have high enzyme-like properties, such as peroxidase, oxidase, catalase, and superoxide dismutase. In this mini-review, we present an overview of the recent progress in MXene-based nanozymes, with emphasis on their synthetic methods, hybridization, bio-catalytic properties, and biomedical applications. The future challenges and prospects of MXene-based nanozymes are also proposed.

Plasmon-enhanced photothermal properties of Au@Ti3C2Tx nanosheets for antibacterial applications

Antibiotic-resistant bacterial strains have become an ever-increasing public concern due to their significant threats to health safety. Nanomaterial-based photothermal treatment has shown potential in antibacterial applications, but many nanomaterials exhibited limited photothermal activity that may compromise their antibacterial efficacies. Herein, we report a novel strategy based on efficient photothermal ablation and physical contact over a supported nanostructure by loading Au nanoparticles (NPs) on few-layered Ti₃C₂T_x nanosheets (NSs) for antibacterial treatment. Ti₃C₂T_x NSs are delaminated via etching and sonication, and act as a reductant for the in situ reduction of HAuCl₄·xH₂O, producing "naked" Au NPs without any stabilizers. Meanwhile, by adjusting the Au/Ti ratio, the size and loading of the Au NPs are finely regulated, thereby providing an ideal model of a surface-clean Au@Ti₃C₂T_x heterostructure for probing the composition-performance relationship. Upon irradiation with visible light, it exhibits synergistically enhanced photothermal conversion efficiency and stability, owing to the localized surface plasmonic resonance effect of Au NP and Au-NS interactions. Moreover, under visible light irradiation for 10 min, the Au@ Ti₃C₂T_x heterostructure exhibits excellent antibacterial activity for Gram-positive S. aureus and Gram-negative E. coli, and kills over 99% bacteria with a low dose of the nanomedicine suspension (50 μg mL^-1). The work demonstrates that the incorporation of transition metal carbides with plasmonic metal nanostructures is an effective strategy to enhance the photothermal antibacterial efficacy.

MXene-Derived Quantum Dot@Gold Nanobones Heterostructure-Based Electrochemiluminescence Sensor for Triple-Negative Breast Cancer Diagnosis

MXene material has been gradually studied in recent years due to its fascinating characteristics. This work developed a novel MXene-derived quantum dots (MQDs) @gold nanobones (Au NBs) heterostructure as the electrochemiluminescence (ECL) sensor. First, MXene and MQDs were synthesized via the green preparation process, which avoided the harm of hydrofluoric acid to humans and the environment. There was a strong ECL signal enhancement in the MQD@Au NBs heterostructure. On the one hand, Au NBs with surface plasmon resonance (SPR) effect acted as an "electronic regulator" that can transfer electrons to itself to control over-injection of electrons into the conduction band of MQDs. The luminous signal of MQDs can be efficiently generated and significantly amplified in the ECL sensing process. On the other hand, the work function of MQDs with excellent conductivity was relatively close to that of Au NBs in the heterostructure. So, ECL quenching caused by short-distance electron transfer between luminophore and Au nanomaterial has been effectively suppressed. The MQD@Au NBs heterostructure-based ECL sensing system was applied to determine miRNA-26a in the serum of patients with triple-negative breast cancer. It not only provides ideas for the green synthesis of MXene but also provides a guide for the application of MQD@Au NBs heterostructure in the field of ECL sensing.

Light Scattering and Luminophore Enrichment-Enhanced Electrochemiluminescence by a 2D Porous Ru@SiO2 Nanoparticle Membrane and Its Application in Ultrasensitive Detection of Prostate-Specific Antigen

Electrochemiluminescence (ECL) by virtue of its controllability and versatility has emerged as a significant tool in bioassay, but how to integrate it with other (nano)materials and further break the limit of sensitivity for ultrasensitive detection still possess tremendous potential. Herein, a close-packed Ru@SiO₂ NP nanomembrane that serves as an enhanced substrate and luminophore enricher simultaneously was constructed by the liquid-liquid interface self-assembly method and applied for ECL-enhanced bioassay. The developed ECL electrode obtained ∼600-fold enhancement on ECL intensity compared with the bare ITO electrode and ∼21-fold enhancement compared with the SiO₂ NP nanomembrane electrode due to the dramatic light scattering of the 2D SiO₂ NPs and the enrichment of Ru(bpy)₃²⁺ molecules on the surface of the Ru@SiO₂ NP nanomembrane electrode. Based on the fascinating Ru@SiO₂ NP nanomembrane platform, we further constructed a label-free immunosensor for the detection of prostate-specific antigen (PSA). The as-fabricated Ru@SiO₂-nanomembrane ECL immunosensor exhibited good stability and performed ultrasensitive detection with an utmost low detection limit of 0.169 fg·mL^-1 (signal/noise = 3). Our work puts forward an effective solution benefiting for further improving ECL performance for ultrasensitive bioassays.

An Extreme Energy-Saving Carbohydrazide Oxidization Reaction Directly Driven by Commercial Graphite Paper in Alkali and Near-Neutral Seawater Electrolytes

The energy-saving anode with low oxidization potential has been an intriguing pursue for earth-abundant seawater electrolysis. In this paper, we first introduced a superior energy-saving carbohydrazide oxidization reaction catalysis system in the anode section, which can be driven by commercial graphite paper with good durability. Combining this catalysis reaction and common graphite paper, the lowest anodic potentials 0.63 V (vs RHE) and 1.09 V (vs RHE) were obtained for driving a 10 mA/cm² current density in alkali and near-neutral seawater electrolytes, respectively, outperforming all the as-reported alkali or near-neutral seawater catalysts accordingly to the best of our knowledge.