Mesoporous Palladium-Boron-Sulfur Alloy Nanospheres for Efficient Hydrogen Evolution

Recent advanced strategies for bimetallenes toward electrocatalytic energy conversion reactions

Designing low-dimensional nanomaterials is vital to address the energy and environmental crisis by means of electrocatalytic conversion reactions. Bimetallenes, as an emerging class of 2D materials, present promise for electrocatalytic conversion reactions. By leveraging atomically thin layers, bimetallenes present unsaturated surface coordination, high specific surface area and high conductivity, which are all indispensable features for heterogeneous electrochemical reactions. However, the intrinsic activity and stability of bimetallenes needs to be improved further for bimetallene electrocatalysts, due to the higher demands of practical applications. Recently, many strategies have been developed to optimize the chemical or electronic structure to accommodate transfer of reactants, adsorption or desorption of intermediates, and dissociation of products. Considering that most such work focuses on adjusting the structure, this review offers in-depth insight into recent representative strategies for optimizing bimetallene electrocatalysts, mainly including alloying, strain effects, ligand effects, defects and heteroatom doping. Moreover, by summarizing the performance of bimetallenes optimized using various strategies, we provide a means to understand structure-property relationships. In addition, future prospects and challenges are discussed for further development of bimetallene electrocatalysts.

Microporous PdCuB nanotag-based electrochemical aptasensor with Au@CuCl2 nanowires interface for ultrasensitive detection of PD-L1-positive exosomes in the serum of lung cancer patients

Programmed cell death ligand 1 protein-positive (PD-L1⁺) exosomes have been found to be a potential biomarker for the diagnosis of non-small cell lung cancer (NSCLC). However, the development of highly sensitive detection technique for PD-L1⁺ exosomes is still a challenge in clinical applications. Herein, a sandwich electrochemical aptasensor based on ternary metal-metalloid palladium-copper-boron alloy microporous nanospheres (PdCuB MNs) and Au@CuCl₂ nanowires (NWs) was designed for the detection of PD-L1⁺ exosomes. The excellent peroxidase-like catalytic activity of PdCuB MNs and the high conductivity of Au@CuCl₂ NWs endow the fabricated aptasensor with intense electrochemical signal, thus enabling the detection of low abundance exosomes. The analytical results revealed that the aptasensor maintained favorable linearity over a wide concentration range of 6 orders of magnitude and reached a low detection limit of 36 particles/mL. The aptasensor is successfully applied to the analysis of complex serum samples and achieves the accurate identification of clinical NSCLC patients. Overall, the developed electrochemical aptasensor provides a powerful tool for early diagnosis of NSCLC.

Quaternary PdCuNiP Porous Nanosheets with Enhanced Electrochemical Performance in the Ethanol Oxidation Reaction

The ability to manipulate metal electrocatalysts with satisfactory performance for the ethanol oxidation reaction (EOR) is promising but still unsatisfactory for practical application in direct ethanol fuel cells. Beyond traditional metal-metal alloys, we herein report a novel metal-nonmetal alloy electrocatalyst that takes advantage of quaternary PdCuNiP alloy composition and the ultrathin/porous nanosheet (NS) structure. The optimized PdCuNiP porous NSs feature more undercoordinated active sites and modified electron/function structures, enabling better antipoisoning ability. Under alkaline conditions, this electrocatalyst shows excellent electrochemical EOR performance with a high EOR activity of 4.05 A mg_Pd^-1 and a low activation energy of 21.2 kJ mol^-1, comparable to the state-of-the-art electrocatalysts reported in the literature. Meanwhile, PdCuNiP porous NSs are electrocatalytically active for electrochemical oxidation of other fuels (methanol, glycerol, and glucose), highlighting their great potential for various direct alcohol fuel cells. The findings reported here may put forward some insights into designing new functional electrocatalysts for various fuel cell electrocatalysis and beyond.

Low Pt-Doped Crystalline/Amorphous Heterophase Pd12P3.2 Nanowires as Efficient Catalysts for Methanol Oxidation

Pd-based catalysts are attractive anodic electrocatalysts for direct methanol fuel cells owing to their low cost and natural abundance. However, they suffer from sluggish reaction kinetic and insufficient electroactivity in methanol oxidation reaction (MOR). In this work, we developed a facile one-pot approach to fabricate low Pt-doped Pd₁₂P_3.2 nanowires with crystalline/amorphous heterophase (termed Pt-Pd₁₂P_3.2 NWs) for MOR. The unique crystalline/amorphous heterophase structures promote the catalytic activity by the plentiful active sites at the phase boundaries and/or interfaces and the synergistic effect between different phases. Moreover, the incorporation of trace Pt into Pd lattices modifies the electronic structure and improves the electron transfer ability. Therefore, the obtained Pt-Pd₁₂P_3.2 NWs display significantly enhanced electrocatalytic performance toward MOR with the mass activity of 2.35 A mg_Pd+Pt^-1, which is 9.0, 2.9, and 2.0 times higher than those of the commercial Pd/C (0.26 A mg_Pd^-1), Pd₁₂P_3.2 NWs (0.82 A mg_Pd^-1), and commercial Pt/C (1.19 A mg_Pt^-1). The high mass activity enables the Pt-Pd₁₂P_3.2 NWs to be the promising Pd-based catalysts for MOR.

Mesoporous Noble Metal-Metalloid/Nonmetal Alloy Nanomaterials: Designing Highly Efficient Catalysts

Mesoporous metals have received increasing attention in catalysis and related applications because of their novel physicochemical properties and functional geometric features. Control of multicomponent compositions and crystalline structures of mesoporous metals is critical for their applications. Recently, mesoporous metals have gradually expanded from traditional metal-metal alloys to metal-metalloid/nonmetal alloys with random solids and/or ordered intermetallics. As new, highly efficient nanocatalysts, mesoporous metal-metalloid/nonmetal alloys not only increase the utilization efficiency of precious noble metals and accelerate electron/mass transfer but also introduce new functions and optimize the surface electronic structure of metal sites, all of which enhance their catalytic activity and stability and tune their catalytic selectivity. In this Perspective, we focus on the latest developments in this area, including the findings from our group regarding the rational design and targeted synthesis of mesoporous noble metal-metalloid/nonmetal alloy nanocatalysts. We summarize the current synthetic strategies for mesoporous noble metal-metalloid/nonmetal alloys and discuss key effects of crystalline mesoporosity and metalloid/nonmetal alloys in enhancing catalytic performances of noble metal catalysts. We also describe the current bottlenecks and major challenges to explore further directions in synthesis and applications of mesoporous noble metal-metalloid/nonmetal alloys.

Atomically ordered Rh2P catalysts anchored within hollow mesoporous carbon for efficient hydrogen production

Atomically ordered Rh₂P nanoclusters encapsulated within a high-surface-area hollow mesoporous carbon nanoreactor are catalytically active for hydrogen production via the electrocatalytic hydrogen evolution reaction and the room-temperature dehydrogenation of ammonia borane.

Constructing 1D Boron Chains in the Structure of Transition Metal Monoborides for Hydrogen Evolution Reactions

The forms of boron atoms are many and varied in the structure of transition metal borides (TMBs). The form of boron atoms determines the structure, morphology, and properties of borides. Herein, transition metal monoborides (CrB and WB) with different arrangement of one-dimensional (1D) boron chains were synthesized under high pressures and high temperatures. The 1D boron chains between the interlayers of CrB are parallel to one another, while the 1D boron chains between the interlayers of WB are perpendicular to one another. The morphologies of CrB and WB also show large differences due to the difference in 1D boron chain arrangement. As electrocatalysts for hydrogen evolution reactions (HERs), CrB and WB show good catalysis activity and durability. WB has the smallest overpotential (210 mV) and Tafel slope (90.09 mV dec−1), which is mainly attributed to the intercrossing boron chains improving the electrical properties of WB, as well as the 5d electrons of W being more chemically active. The TOF value of WB is 1.35 s−1, proving that WB has a higher intrinsic catalytic activity during HERs. This work provides a data reference for the development of high-efficiency electrocatalysts.

Nonmetal-doping of noble metal-based catalysts for electrocatalysis

In response to the shortage of fossil fuels, efficient electrochemical energy conversion devices are attracting increasing attention, while the limited electrochemical performance and high cost of noble metal-based electrode materials remain a daunting challenge. The electrocatalytic performance of electrode materials is closely bound with their intrinsic electronic/ionic states and crystal structures. Apart from the nanoscale design and conductive composite strategies, heteroatom doping, particularly for nonmetal doping (e.g., hydrogen, boron, sulfur, selenium, phosphorus, and tellurium), is also another effective strategy to greatly promote the intrinsic activity of the electrode materials by tuning their atomic structures. From the perspective of electrocatalytic reactions, the effective atomic structure regulation could induce additional active sites, create rich defects, and optimize the adsorption capability, thereby contributing to the promotion of the electrocatalytic performance of noble metal-based electrocatalysts. Encouraged by the great progress achieved in this field, we have reviewed recent advancements in nonmetal doping for electrocatalytic energy conversion. Specifically, the doping effect on the atomic structure and intrinsic electronic/ionic state is also systematically illustrated and the relationship with the electrocatalytic performance is also investigated. It is believed that this review will provide guidance for the development of more efficient electrocatalysts.