(C7H18N2)PbI4: A 2D Hybrid Perovskite Solid-State Phase Transition Material with Semiconducting Properties

What Matters for the Charge Transport of 2D Perovskites?

Compared to 3D perovskites, 2D perovskites exhibit excellent stability, structural diversity, and tunable bandgaps, making them highly promising for applications in solar cells, light-emitting diodes, and photodetectors. However, the trade-off for worse charge transport is a critical issue that needs to be addressed. This comprehensive review first discusses the structure of 3D and 2D metal halide perovskites, then summarizes the significant factors influencing charge transport in detail and provides a brief overview of the testing methods. Subsequently, various strategies to improve the charge transport are presented, including tuning A'-site organic spacer cations, A-site cations, B-site metal cations, and X-site halide ions. Finally, an outlook on the future development of improving the 2D perovskites' charge transport is discussed.

H/F Substitution Achieved Enantiomeric Organic Inorganic Hybrid Perovskites and Trigonal Structure [DMFP]3(CdBr3)(CdBr4)

Organic-inorganic hybrid perovskites (OIHPs) have been emerging as a hot research topic due to their potential applications in energy storage, semiconductors, and electronic devices. Herein, we systematically investigated the synthesis and phase transition behaviors of the enantiomeric OIHPs, (R) and (S)-N,N-dimethyl-3-fluoropyrrolidinium cadmium bromide ([DMFP][CdBr3]), and the hybrid trigonal structure [DMFP]3 (CdBr3)(CdBr4). The enantiomers have a mirror-symmetric structure and enhanced solid-state phase transition points of 417 and 443 K, in contrast to the nonfluorinated parent compound, N,N-dimethyl-pyrrolidinium cadmium bromide ([DMP][CdBr3], 385 K). Moreover, racemic H/F substitution on the pyrrolidinium cations leads to the formation of a trigonal compound, showing above-room-temperature structural phase transition and dominant ferroelasticity. This work discovers chiral enantiomeric OIHPs through H/F substitution, demonstrating a useful chemical synthesis strategy for exploring novel phase transition materials.

Organic-inorganic haloargentate hybrids of [Me-dabco]Ag2X3 (X = I or Br) with halide ions manipulating the crystal structure, phase transition, and dielectric behavior

Two haloargentate hybrids, [Me-dabco]Ag₂X₃ (Me-dabco = 1-methyl-1,4-diazabicyclo-[2.2.2]octan-1-ium, X = I (1) or Br (2)), with the same formula but different structures have been synthesized by a slow evaporation method and characterized by microanalysis, infrared spectroscopy, thermogravimetric, and powder X-ray diffraction techniques. Hybrid 1 consists of completely isolated [Ag₄I₆]^2- clusters, while hybrid 2 exhibits a complicated one-dimensional (1D) chain structure formed by four different configurations of neutral chains and two dissimilar configurations of anionic chains. Hybrid 2 undergoes two reversible order-disorder phase transitions, while hybrid 1 displays one reversible and one irreversible structural phase transition. Both 1 and 2 displayed step-like dielectric anomalies in the vicinity of the phase transition temperature. The corresponding dielectric constants in the high dielectric states are approximately 13 and 6 times higher than those in the low dielectric states for 1 and 2, respectively. Interestingly, the subtle change of halides from I^- to Br^- significantly affects the aggregated structure of haloargentate, the phase transition, and dielectric behaviors, revealing the typical 'butterfly effect' with the ion radii of halides in these two haloargentate hybrids.

Effect of Pd(II) uptake on high-temperature phase transitions in a hybrid organic-inorganic perovskite semiconductor

Hybrid organic-inorganic perovskites (HOIPs) have been widely studied for their interesting functions and potential applications. Here, we report a novel sulfur-containing hybrid organic-inorganic perovskite based on a one-dimensional ABX₃-type compound: [C₃H₇N₂S]PbI₃ ([C₃H₇N₂S]⁺ is 2-amino-2-thiazolinium) (1). Compound 1 undergoes two high-temperature phase transitions at 363 K and 401 K, respectively, showing a band gap of 2.33 eV, and has a narrower band gap compared to other one-dimensional materials. Moreover, by introducing thioether groups into the organic component, 1 has the ability to uptake Pd(II) ions. Compared with previously reported low-temperature isostructural phase transition sulfur-containing hybrids, the molecular motion of 1 becomes more intense under the stimulation of high temperature, leading to changes in the space group during the two phase transitions (Pbca → Pmcn → Cmcm), which are no longer the previous isostructural phase transitions. Significant changes in the phase transition behavior and semiconductor properties before and after metal absorption make it possible to monitor the absorption process of metal ions. The study of the effect of Pd(II) uptake on phase transitions may be helpful to reveal the mechanism of phase transitions more deeply. This work will broaden the hybrid organic-inorganic ABX₃-type semiconductor family and pave the way for the development of organic-inorganic hybrid-based multifunctional phase transition materials.

Templating Influence of Regulated Inorganic Framework in Two-Dimensional Ferroelastic Perovskites: (C3 H5 CH2 NH3 )2 [MCl4 ] (M=Mn and Cd)

The remarkable material stability and structural diversity of two-dimensional (2D) organic-inorganic hybrid perovskites (OIHPs) constitute a vast available library of versatile materials. In particular, ferroelastic property, for which the spontaneous strain can be transformed by applying mechanical stress, is very promising for extensive nanotechnological applications. However, integrating ferroelastic property into 2D OIHPs is still in its infancy. Herein, we designed two new 2D OIHPs (C₃ H₅ CH₂ NH₃ )₂ [MCl₄ ] (M=Mn for 1 and Cd for 2), which undergo reversible ferroelastic phase transitions with an Aizu expression 4/mmmFmmm. The templating influence of the more distorted inorganic framework on the disordering of organic cations and the stronger hydrogen bonds has a key role in the striking improvement of Curie temperature from 246 K in 1 to 273 K in 2. Meanwhile, the minimized alteration of structural motif ensures the well maintaining of the ferroelastic performance in the forms of crystals and thin films, as demonstrated by the identifiable evolution of domain structures. This work will provide a fertile new ground for enlarging the limited number of 2D ferroelastic OIHPs with better practical utility.

Synthesis and Characterization of a Displacement-Type Ferroelectric-Ferroelectric Phase Transition Compound [(NH3)(CH2)3(NH3)]2[InBr6]Br·H2O

Ferroelectric materials have aroused the researchers' great interest due to their wide applications. Here, a displacement-type ferroelectric-ferroelectric phase transition material [(NH₃)(CH₂)₃(NH₃)]₂[InBr₆]Br·H₂O (1) with T_c = 143 K was successfully prepared. The ferroelectric phase transition is verified by the characterization techniques such as differential scanning calorimetry, single-crystal structure elucidation, dielectric and ferroelectric measurements. The single-crystal structure elucidation reveals that the displacement and distortion of [(NH₃)(CH₂)₃(NH₃)]²⁺ cations lead to the phase transition from Cmc2₁ to Pca2₁. The spontaneous polarizations at 293 and 133 K are 0.15 and 0.12 μC·cm^-2, respectively. We expect that this work will help in further exploration of some new ferroelectric materials.

Tunable 2D Hybrid Perovskites with Pd(II) Adsorption and Semiconducting Properties

Layered hybrid perovskites, due to their broad application potential in optical, electrical, and luminescence fields, are attracting increasing attention. Herein, we report two novel two-dimensional hybrid organic-inorganic perovskites [C₅H₁₀N₂S]PbBr₄ (1) and [C₅H₁₀N₂S]PbI₄ (2) ([C₅H₁₀N₂S]²⁺ is 3-ethylaminothiazolium), which possess phase transition and semiconductor properties. Intriguingly, 1 has semiconductor properties with an optical band gap of 2.70 eV and a photocurrent to dark current ratio of 50 for the photoresponse. By varying the halogen, the band gap of 2 is significantly reduced to 2.06 eV and the photocurrent to dark current ratio of the photoresponse reaches 10⁴. Moreover, compounds 1 and 2 are able to adsorb Pd(II) resulting from the presence of -SH groups in the cation. The adsorption of Pd(II) can turn a semiconductor into an insulator, weaken the fluorescence intensity, and cause the phase transition behavior to disappear. This work has remarkable implications for the continuous development of hybrid perovskites with phase transitions, metal adsorption, and semiconductor properties.

H/F Substitution on the Spacer Cations Leads to 1D-to-2D Increment of the Pyrrolidinium-Containing Lead Iodide Hybrid Perovskites

Hybrid organic-inorganic perovskites (HOIPs) have emerged as multifunctional materials with remarkable optical and electronic properties. In particular, 2D-layered lead iodide-based HOIPs possess great practical application potential in the photoelectric field. In this work, we report H/F substitution-induced 1D-to-2D increment of lead iodide HOIPs. The enantiomeric HOIPs, S- and R-FPPbI₃ (FP = 3-fluoropyrrolidinium), were achieved by monofluoride substitution on the spacer cations of the parent HOIP, PyPbI₃ (Py = pyrrolidinium), showing mirror image structural relationship and reversible solid-state phase transition. A 2D-layered HOIP, (DFP)₂PbI₄ (DFP = 3,3-difluoropyrrolidinium), was achieved with a low band gap of 2.09 eV through difluoride substitution, thanks to the expansion of the Pb-I network from 1D to 2D. This work highlights the exploration of 1D chiral and 2D-layered HOIP materials with reversible phase transitions through H/F substitution strategies.

Tunable thermotropic phase transition triggering large dielectric response and superionic conduction in lead halide perovskites

Lead halide perovskites show tunable structural phase transition, accompanied by large dielectric response and superionic conduction.

Metal Regulated Organic–Inorganic Hybrid Ferroelastic Materials: [(CH3)3CN(CH3)2CH2F]2[MBr4] (M = Cd and Zn)

Two organic–inorganic hybrid compounds [(CH3)3CN(CH3)2CH2F]2[MBr4] (M = Cd for 1 and Zn for 2) undergo ferroelastic phase transitions with Aizu notation of mmmF2/m, accompanied by dielectric switches. The replacement of...

An Organic-Inorganic Hybrid Pyrrolidinium Ferroelectric Based on Solvent Selective Effect

Organic-inorganic hybrid ferroelectrics (OIHFs) have fueled enormous interest benefiting from their less environmental pollution, performance-tailored functionality, low product costs as well as tunability of structures. However, the lack of material synthesis approaches and diverse targeted molecular design is a stumbling block for designing novel OIHFs rationally. Here, we report a unique organic-inorganic hybrid ferroelectric (3,3-difluoropyrrolidine)₂CdCl₄ 1 and another novel nonferroelectric crystal (3,3-difluoropyrrolidine)₂Cd₂Cl₆ 2 by changing various crystallization solvents. Significantly, 1 presents a ferroelectric phase transition behavior at ∼367 K, and the distinct symmetry breaking, i.e., mmmFm, sets up a biaxial ferroelectric with four equivalent directions of polarization, which has a P_r ∼ 0.77 μC/cm². Systematic studies prove that ferroelectricity can be ascribed to the synergistic effects of the distortion of the inorganic anion skeleton and the ordering of organic cations. This work reveals the potential of constructing novel ferroelectrics based on the solvent selective effect and pyrrolidinium as organic cations.

Tuning Dielectric Transitions in Two-Dimensional Organic-Inorganic Hybrid Lead Halide Perovskites

Organic-inorganic hybrid metal halide perovskites possessing unique two-dimensional (2D)-layered structures have been demonstrated with excellent molecular tunability and stability, especially the promising semiconductor properties for solar cell applications. In this work, three 2D lead halide organic-inorganic hybrid perovskites (IAA)₂PbX₄ (IAA = isoamylammonium cation and X = Cl, Br, and I) were synthesized by employing a solution processing method and demonstrate distinct tuning solid-state phase transitions coupled with dielectric responses, as well as light absorption properties. Among the title perovskites, the phase transition temperature decreases gradually, and their band gap also indicates a narrowing trend. The results are mainly derived from slight changes in the crystal structure by halogen regulation. These findings might provide an effective crystal engineering strategy for exploring high-performance functional perovskite materials.

Dielectric switching, SHG response and Pd(ii) adsorption of a multifunctional phase-transition complex

One-dimensional coordination polymer [(C2H4OH)C4H9NS]CdCl3 has the performance of dielectric switching and SHG response. And the compound can adsorb precious Pd(ii) and the adsorption could be monitored by dielectric anomaly and SHG signal.