B,N-Codoped Porous C with Controllable N Species as an Electrode Material for Supercapacitors

MOF-Derived Zn/N-Doped Porous Carbon Film on a Carbon Nanotube for High-Performance Supercapacitors

Designing high-performance binder-free electrochemical electrodes is crucially important toward supercapacitors. In this paper, a Zn/N-doped porous carbon film coating on flexible carbon nanotubes (ZIF-8@CT-800) derived from the epitaxial Zn-MOF film growth on cotton textile was successfully fabricated via a combination of the liquid-phase epitaxial (LPE) method and calcination treatments. The ZIF-8@CT-800 serves directly as a self-supported electrode for supercapacitors and exhibits a high areal capacitance of 930 mF·cm-2 at a current density of 1 mA·cm-2 and a good recyclability of 86% after 2000 cycles. The excellent supercapacitor property is ascribed to the unique structural design of ZIF-8@CT-800, which provides appropriate channels for enhanced electronic and ionic transport as well as increased surface area for accessing more electrolyte ions. This work will provide significant guidance for designing MOF-derived porous carbon to construct flexible binder-free electrode materials with high electrochemical performance.

Hydrothermal Carbonization of Cellulose with Ammonium Sulfate and Thiourea for the Production of Supercapacitor Carbon

Doping with heteroatoms is the main method used to enhance energy storage with carbon materials, and polyatomic doping is one of the main challenges. Hydrothermal carbonization of cellulose was performed at 240 °C for 1 h. Ammonium sulfate and thiourea dopants were selected as the sources of inorganic nitrogen and organic nitrogen in the preparation of supercapacitor carbon. The effects of boric acid on the properties of the resulting hydrochar after KOH activation were examined. The results showed that the proportion of functional groups and the specific surface area of the activated hydrochar were reduced by the addition of boric acid, and the formation of micropores was inhibited. The hydrochar obtained from the reaction of cellulose and organic nitrogen compounds had a better pore size distribution and electrochemical properties after activation. The largest specific surface area (952.27 m2/g) was obtained when thiourea was used as the sole dopant. In a three-electrode system, the specific capacitance of the activated hydrochar reached 235.8 F/g at a current density of 1 A/g. After 20,000 charging and discharging cycles at a current density of 10 A/g, the capacitance retention rate was 99.96%. Therefore, this study showed that supercapacitor carbon with good electrochemical properties was obtained by the direct reactions of cellulose with organic nitrogen compounds.

Kinetics-Favorable Ultrathin NiCo-MOF Nanosheets with Boosted Pseudocapacitive Charge Storage for Quasi-Solid-State Hybrid Supercapacitors

Bimetallic metal-organic frameworks (MOFs) with an ultrathin configuration are compelling materials for developing high-performance energy storage devices on account of their unique structural merits. Herein, a hydrangea-like NiCo-MOF is well prepared using controllable solvothermal and cation-exchange processes, synchronously achieving bimetallic nodes and hierarchical ultrathin architecture. The structural superiority enables NiCo-MOF of expanded electrons' transfer pathways and multitudinous electrolytes' diffusion channels, resulting in a significant enhancement in pseudocapacitive performance. Coupling with the bimetallic nature and constructional advantages, NiCo-MOF shows superior gravimetric capacity (832.6 C g^-1 at 1 A g^-1) and electrochemical kinetics to those of monometallic Ni-MOF and Co-MOF. Importantly, the quasi-solid-state hybrid supercapacitor (HSC) based on the NiCo-MOF cathode and active carbon (AC) anode delivers a desirable energy density (45.3 Wh kg^-1 at 847.8 W kg^-1), a favorable power density (7160.0 W kg^-1 at 23.3 Wh kg^-1), a remarkable cyclability (82.4% capacity retention over 7000 cycles), and a capability of driving miniature electronics, exhibiting its potential in practical applications. This work presents an efficient design strategy to develop kinetics-favorable MOF materials for energy storage.

Monte Carlo Simulation for Exploring Mechanical Properties of Porous Materials Based on Scaled Boundary Finite Element Method

The existence of pores is a very common feature of nature and of human life, but the existence of pores will alter the mechanical properties of the material. Therefore, it is very important to study the impact of different influencing factors on the mechanical properties of porous materials and to use the law of change in mechanical properties of porous materials for our daily lives. The SBFEM (scaled boundary finite element method) method is used in this paper to calculate a large number of random models of porous materials derived from Matlab code. Multiple influencing factors can be present in these random models. Based on the Monte Carlo simulation, after a large number of model calculations were carried out, the results of the calculations were analyzed statistically in order to determine the variation law of the mechanical properties of porous materials. Moreover, this paper gives fitting formulas for the mechanical properties of different materials. This is very useful for researchers estimating the mechanical properties of porous materials in advance.