Strategy to Design-Synthesize Bimetallic Nanostructures Using the Alcohol Reduction Method

Synthesis of low-cost multi-element Pt-based alloy nanoparticles as catalysts for the oxygen reduction reaction

Due to their high catalytic activity, stability, and economic benefits, Pt-based multi-element alloyed nanoparticles (NPs) are considered promising electrodes for oxygen reduction reactions. However, a synthesis method capable of controlling the reduction reaction of elements with different redox potentials to synthesize multimetallic alloy NPs is yet to be developed. In this study, monodisperse NiPtPd alloy NPs with varying compositions were synthesized using 1-heptanol as a reducing solvent. The selection of low-reducing noble metal precursors and complexing agents is done strategically to adjust the reduction time of metal ions. The spectroscopic results confirmed that olelylamine (OAm) preferentially coordinates with Pt ions, while trioctylphosphine (TOP) preferentially coordinates with Pd ions. Consequently, control of the elemental distribution within the particle is successfully achieved by adjusting the OAm/Pt and TOP/Pd molar ratios. Subsequently, Ni78Pt11Pd11 alloy NPs were designed, and their catalytic properties as electrodes in the oxygen reduction reaction (ORR) were examined. Despite a low noble metal content of 22%, the catalytic performance and stability were superior to and comparable to those of commercial Pt NPs, respectively.

In situ Investigations of the Formation Mechanism of Metastable γ-BiPd Nanoparticles in Polyol Reductions

Synthesizing intermetallic phases containing noble metals often poses a challenge as the melting points of noble metals often exceed the boiling point of bismuth (1560 °C). Reactions in the solid state generally circumvent this issue but are extremely time consuming. A convenient method to overcome these obstacles is the co-reduction of metal salts in polyols, which can be performed within hours at moderate temperatures and even allows access to metastable phases. However, little attention has been paid to the formation mechanisms of intermetallic particles in polyol reductions. Identifying crucial reaction parameters and finding patterns are key factors to enable targeted syntheses and product design. Here, we chose metastable γ-BiPd as an example to investigate the formation mechanism from mixtures of metal salts in ethylene glycol and to determine critical factors for phase formation. The reaction was also monitored by in situ X-ray diffraction using synchrotron radiation. Products, intermediates and solutions were characterized by (in situ) X-ray diffraction, electron microscopy, and UV-Vis spectroscopy. In the first step of the reaction, elemental palladium precipitates. Increasing temperature induces the reduction of bismuth cations and the subsequent rapid incorporation of bismuth into the palladium cores, yielding the γ-BiPd phase.

Kinetically Controlled Direct Synthesis of B2- and A1-Structured Cu-Pd Nanoparticles

Atomic arrangement in Cu-Pd alloy nanoparticles (NPs) has been reported to influence the catalytic activity, but they have yet to be studied in detail. Unlike previous studies, where the B2 structure Cu-Pd NPs are obtained by heat treating the A1 structure, this study reports the one-pot direct syntheses of A1- and B2-structured Cu-Pd NPs using an alcohol reduction method. The alcohol reduction technique facilitates the kinetic control of the reduction reaction by selecting the appropriate alcohol type and complexing agent to delay the reduction of easily reducible metallic elements to realize control over the reduction kinetics for coreduction. Different formation mechanisms for A1- and B2-structured CuPd NPs were confirmed by in situ ultraviolet-visible (UV-vis) measurements and morphological and structural analyses of samples withdrawn during the reaction. Finally, the direct formation of single-phase B2-structured Cu-Pd NPs with an average diameter of 18.6 ± 7.6 nm was realized using tri-n-octyl phosphine as a complexing agent. The noticeable crystal structural dependence of the electrocatalytic CO2 reduction reaction properties of A1- and B2-structured CuPd NPs was demonstrated.

Mechanism of formation of Co-Ru nanoalloys: the key role of Ru in the reduction pathway of Co

The chemical synthesis of alloy nanoparticles requires adequate conditions to enable co-reduction instead of separate reduction of the two metal cations. The mechanism of formation of bimetallic cobalt-ruthenium nanoalloys by reducing metal salts in an alcohol medium was explored to draw general rules to extrapolate to other systems. The relative kinetics of the reduction of both metal cations were studied by UV-visible and in situ Quick-X-ray absorption spectroscopies as well as H2 evolution. The addition of Co(II) ions does not influence the reduction kinetics of Ru(III) but adding Ru(III) to a Co(II) solution promotes the reduction of cobalt cations. Indeed, while CoO is formed when reaching the boiling temperature of the solvent for the monometallic system, a direct reduction of Co is observed at this temperature without formation of the oxide for the bimetallic one. The co-reduction of the metal cations results in the formation of bimetallic nanoplatelets, the size of which can be tuned by changing the Ru content.

Synthesis of Electromagnetic Wave-Absorbing Co-Ni Alloys and Co-Ni Core-Shell Structured Nanoparticles

Co-Ni alloy nanoparticles, a potential candidate for microwave absorption material, were successfully synthesized by tuning the reduction timing of Co and Ni ions by introducing oleylamine as a complexing agent and 1-heptanol as a reducing solvent. The formation mechanism elucidated using time-resolved sampling and in situ X-ray absorption spectroscopy (XAS) and ultraviolet-visible (UV-vis) spectrophotometry measurements suggested that the delay in the reduction of Co ions via complexation with oleylamine facilitated the co-reduction of Co with Ni ions and led to the formation of Co-Ni alloys. The successful synthesis of Co-Ni alloys experimentally confirmed the differences in magnetic properties between alloy and core-shell structured Co₅₀Ni₅₀ particles. Further, the syntheses of Co-Ni alloys with different compositions were also possible using the above technique. In addition, the microwave absorption properties were measured using the free-space method utilizing a vector network analyzer of Co₅₀Ni₅₀─polyethylene composite with different sheet thicknesses. A reflection loss (RL) value of -25.7 dB at 13.6 GHz for the alloy structure was more significant than the core-shell counterpart. The above values are high compared to results reported in the past. The validity of the measurements was confirmed by utilizing the parameter retrieval method to extract permittivity and permeability from the scattering parameter (S) and recalculation of the RL as a function of frequency.

In situ investigation of the formation mechanism of α-Bi2Rh nanoparticles in polyol reductions

The study of Bi2Rh formation in a polyol process revealed a two-step mechanism. BiRh is formed by co-reduction of bismuth and rhodium cations and converted into Bi2Rh by Bi diffusion. Various starting materials and reaction parameters are examined.