Water-Molecule-Induced Emission Transformation of Zero-Dimension Antimony-Based Metal Halide

Controllable Multi-Exciton Zero-Dimensional Antimony-Based Metal Halides for White-light Emission and β-Ray Detection

Self-trapped exciton (STE) emission, typified by antimony (Sb), with broadband characteristics, represents the next generation of materials for solid-state lighting and radiation detection. However, little is known about the multiexciton behavior of the Sb emission center. Here, we proposed a general approach for designing antimony-centered multi-exciton emitting materials through self-assembly. Benefitting from controllable multiexciton behavior, dual-band white light emission spanning the entire visible spectrum was achieved. Relying on the reduction of an effective atomic number brought by self-assembly, excellent scintillation response to β-rays was attained. This study offers unprecedented insight into hybrid single/triple STE emission and unveils new avenues for single-emitter white-light emission, as well as radiographic testing using low-risk β-rays as sources.

Blue-Light-Excitable Red-Emitting Organic Antimony Halides as a Reversible Humidity Sensor

Zero-dimensional organic antimony halides have attracted significant attention recently due to their structural variety, tunable optical properties, and high luminescence efficiency. Here, a new series of antimony bromide hybrid structures with seesaw [SbBr4] and pyramidal [SbBr5] geometries are reported with low band gaps and blue-light excited red emissions. Their luminescence is attributed to self-trapped excitons with a broadband emission of a large Stokes shift. Their photoluminescence signal is sensitive to water molecules, with a reversible positive correlation in a relative humidity range of 30-90%, enabling them as potential materials for real-time, self-consistent humidity sensors.

Glass Disorder Modulated Luminescence in Zero-Dimensional Antimony-Chloride Coplanar Dimers for Optical Anti-counterfeiting

Zero-dimensional metal halides have received wide attention due to their structural diversity, strong quantum confinement, and associated excellent photoluminescence properties. A reversible and tunable luminescence would be desirable for applications such as anti-counterfeiting, information encryption, and artificial intelligence. Yet, these materials are underexplored, with little known about their luminescence tuning mechanisms. Here we report a pyramidal coplanar dimer, (TBA)Sb2Cl7 (TBA = tetrabutylammonium), showing broadband emission wavelength tuning (585-650 nm) by simple thermal treatment. We attribute the broad color change to structural disorder induced by varying the heat treatment temperatures. Increasing the heating temperature transitions the material from long-range ordered crystalline phase to highly disordered glassy phase. The latter exhibits stronger electron-phonon coupling, enhancing the self-trapped exciton emission efficiency. The work provides a new material platform for manifold optical anti-counterfeiting applications and sheds light on the emission color tuning mechanisms for further design of stimuli-responsive materials.

Sb3+-Doped Indium-Based Metal Halide (Gua)3InCl6 with Efficient Yellow Emission

In recent years, low-dimensional organic-inorganic hybrid metal halides (OIHMHs) have shown excellent photophysical properties due to their quantum structure, adjustable energy levels, and energy transfer between inorganic and organic components, which have attracted extensive attention from researchers. Herein, we synthesize a zero-dimensional (0D) OIHMH, Sb3+:(Gua)3InCl6, by introducing Sb3+ into (Gua)3InCl6, which undergoes a significant enhancement of the emission peak at 580 nm with the photoluminescence quantum yield (PLQY) boosted from 17.86 to 95.72% when excited at 340 nm. This boost in photoluminescence of the doped sample was studied by combining ultrafast femtosecond transient absorption, temperature-dependent photoluminescence (PL) spectra, and density functional theory (DFT) calculation, revealing the process of self-trapped exciton (STE) recombination to emit light at both Sb and In sites in this 0D structure simultaneously. This material with the lowest dark STE level at the In site for emission in the undoped sample can amazingly yield very strong emission in the doped sample, which has never been observed before. Finally, we tested its application in a photoelectric device. This work not only helps to gain a deeper understanding of the formation of STEs in In-based halides but also plays a certain guiding role in the design of new luminescent materials.

Thermal/Water-Induced Phase Transformation and Photoluminescence of Hybrid Manganese(II)-Based Chloride Single Crystals

Mn(II)-based hybrid halides have attracted great attention from the optoelectronic fields due to their nontoxicity, special luminescent properties, and structural diversity. Here, two novel organic-inorganic hybrid Mn(II)-based halide single crystals (1-mpip)MnCl4·3H2O and (1-mpip)2MnCl6 (1-mpip = 1-methylpiperazinium, C5H14N2+) were grown by a slow evaporation method in ambient atmosphere. Interestingly, (1-mpip)2MnCl6 single crystals exhibit the green emission with a PL peak at 522 nm and photoluminescence quantum yields (PLQYs) of ≈5.4%, whereas (1-mpip)MnCl4·3H2O single crystals exhibit no emission characteristics. More importantly, there exists a thermal-induced phase transformation from (1-mpip)MnCl4·3H2O to emissive (1-mpip)2MnCl6 at 372 K. Moreover, a reversible luminescent conversion between (1-mpip)MnCl4·3H2O and (1-mpip)2MnCl6 was simply achieved when heated to 383 K and placed in a humid environment or sprayed with water. This work not only deepens the understanding of the thermal-induced phase transformation and humidity-sensitive luminescent conversion of hybrid Mn(II)-based halides, but also provides a guidance for thermal and humidity sensing and anticounterfeiting applications of these hybrid materials.

Luminescent Behavior of Sb3+-Activated Luminescent Metal Halide

Metal halide perovskites have unparalleled optoelectronic properties and broad application potential and are expected to become the next epoch-making optoelectronic semiconductors. Although remarkable achievements have been achieved with lead halide perovskites, the toxicity of lead inhibits the development of such materials. Recently, Sb3+-activated luminescent metal halide perovskite materials with low toxicity, high efficiency, broadband, large Stokes shift, and emission wavelengths covering the entire visible and near-infrared regions have been considered one of the most likely luminescent materials to replace lead halide perovskites. This review reviews the synthesis, luminescence mechanism, structure, and luminescence properties of the compounds. The basic luminescence properties of Sb3+-activated luminescent metal halide perovskites and their applications in WLED, electroluminescence LED, temperature sensing, optical anti-counterfeiting, and X-ray scintillators are introduced. Finally, the development prospects and challenges of Sb3+-activated luminescent metal halide perovskites are discussed.

Water-Molecule-Induced Reversible Fluorescence in a One-Dimensional Mn-Based Hybrid Halide for Anticounterfeiting and Digital Encryption-Decryption

Hybrid metal halides with reversible transformation of structure and luminescence properties have attracted significant attention in anticounterfeiting. However, their long transition time and slow response rate may hinder the rapid identification of confidential information. Here, a one-dimensional hybrid manganese-based halide, i.e., (C5H11N3)MnCl2Br2·H2O, is prepared and demonstrates the phenomenon of water-molecule-induced reversible photoluminescence transformation. Heating for <40 s induces a dynamic transfer of red-emissive (C5H11N3)MnCl2Br2·H2O to green-emissive (C5H11N3)MnCl2Br2. In addition, the green emission can gradually revert to red emission during a cooling process in a moist environment, demonstrating excellent reversibility. It is found that the water molecule acts as an external stimulus to realize the reversible transition between red and green emission, which also exhibits remarkable stability during repeated cycles. Furthermore, with the assistance of heating and cooling, a complex digital encryption-decryption and an optical "AND" logical gate are achieved, facilitating the development of anticounterfeiting information security.

Dual Monomeric Inorganic Units Constructed Bright Emissive Zero-Dimensional Antimony Chlorides with Solvent-Induced Reversible Structural Transition

A5M2X11 and A3M2X9 families (A = monovalent organic cation; M = trivalent metal; X = halogen) are receiving increasing attention because of their combination of easy solution processability and superior ferroelectricity properties. However, synthesizing highly efficient A5M2X11 and A3M2X9-type fluorophores with multiple monomeric inorganic units and achieving their structural interconversion remains challenging. Here, we report two novel zero-dimensional (0D) antimony halides, (C10H16N)5Sb2Cl11·C2H3N (1) and (C10H16N)3Sb2Cl9 (2), which not only contain two distinct [SbXn]3-n units but also have excellent orange (590 nm) and yellow-green emission (540 nm) with high PLQY of 17.7% and 31.5%, respectively. Interestingly, a reversible structural conversion could be triggered by acetonitrile steam stimulation, accompanied by luminescence switching properties. This work not only enriches the structure of hybrid Sb-based halides but also provides the possibility of well-known A5M2X11 and A3M2X9 families as structural transformation materials.

Reversible structural transformations and color-tunable emissions in organic manganese halides

Herein, we for the first time report a reversible conversion between green-emissive [DMPZ]MnCl4 and red-emissive [DMPZ]4(MnCl6)(MnCl4)2·(H2O)2 (DMPZ = 1,4-dimethylpiperazine) using kinetic and thermodynamic controlling strategies. Significantly, the synchronous structural and emission transformations in single-component organic manganese halides with adjustable emission colors are highlighted.

Syntheses, Structures, and Photoluminescence of Copper-Based Halides

Copper-based halides have been found to be a new family of lead-free materials with high stability and superior optoelectrical properties. In this work, we report the photoluminescence of the known (C₈H₁₄N₂)CuBr₃ and the discovery of three new compounds, (C₈H₁₄N₂)CuCl₃, (C₈H₁₄N₂)CuCl₃·H₂O, and (C₈H₁₄N₂)CuI₃, which all exhibit efficient light emissions. All these compounds have monoclinic structures with the same space group (P2₁/c) and zero-dimensional (0D) structures, which can be viewed as the assembly of promising aromatic molecules and different copper halide tetrahedrons. Upon the irradiation of deep ultraviolet light, (C₈H₁₄N₂)CuCl₃, (C₈H₁₄N₂)CuBr₃,_, and (C₈H₁₄N₂)CuI₃ show green emission peaking at ∼520 nm with a photoluminescent quantum yield (PLQY) of 3.38, 35.19, and 17.81%, while (C₈H₁₄N₂)CuCl₃·H₂O displays yellow emission centered at ∼532 nm with a PLQY of 2.88%. A white light-emitting diode (WLED) was successfully fabricated by employing (C₈H₁₄N₂)CuBr₃ as a green emitter, demonstrating the potential of copper halides for applications in the green lighting field.

Reversible Luminescent Switching Induced by Heat/Water Treatment in a Zero-Dimensional Hybrid Antimony(Ⅲ) Chloride

Recently zero-dimensional (0-D) inorganic-organic metal halides (IOMHs) have become a promising class of optoelectronic materials. Herein, we report a new photoluminescent (PL) 0-D antimony(III)-based IOMH single crystal, namely [H2BPZ][SbCl5]·H2O (BPZ = benzylpiperazine). Photophysical characterizations indicate that [H2BPZ][SbCl5]·H2O exhibits singlet/triplet dual-band emission. Density functional theory (DFT) calculations suggest that [H2BPZ][SbCl5]·H2O has the large energy difference between singlet and triplet states, which might induce the dual emission in this compound. Temperature-dependent PL spectra analyses suggest the soft lattice and strong electron-phonon coupling in this compound. Thermogravimetric analysis shows that the water molecules in the lattice of the title crystal could be removed by thermal treatment, giving rise to a dehydrated phase of [H2BPZ][SbCl5]. Interestingly, such structural transformation is accompanied by a reversible PL emission transition between red light (630 nm, dehydrated phase) and yellow light (595 nm, water-containing phase). When being exposed to an environment with 77% relative humidity, the emission color of the dehydrated phase was able to change from red to yellow within 20 s, and the red emission could be restored after reheating. The red to yellow emission switching could be achieved in acetone with water concentration as low as 0.2 vol%. The reversible PL transition phenomenon makes [H2BPZ][SbCl5]·H2O a potential material for luminescent water-sensing.

Rational Design of a Super-Alkali Compound with Reversible Photoluminescence

The zero-dimensional (0D) (H₅O₂)(C₄H₁₄N₂S₂)₂BiCl₈: Sb³⁺ single crystal is obtained by the cooling crystallization method. Surprisingly, this compound shows reversible photoluminescence (PL) upon H₅O₂⁺Cl^- removal and insertion. To be specific, the release of H₅O₂⁺Cl^- resulted in red-orange emission with a very low photoluminescence quantum yield (PLQY). While on the reuptake of it, a bright yellow emission with a nearly 10-fold increase of PLQY was observed. Density functional theory (DFT) calculations and temperature-dependent PL experiments reveal that significant [SbCl₆]^3- octahedron distortion induced by guest (H₅O₂⁺Cl^-) removal at the ground state, especially at the excited state, is responsible for the disparate PL performance. Encouragingly, we also found that (C₄H₁₄N₂S₂)₂BiCl₇: Sb³⁺ exhibits a fast response (<3 s) to dilute hydrochloric acid with naked-eye perceivable PL color changes, rendering it a potential sensing material for hydrochloric acid.

Realizing High-Efficiency Yellow Emission of Organic Antimony Halides via Rational Structural Design

Zero-dimensional (0D) organic metal halides have captured extensive attention for their various structures and distinguished optical characteristics. However, achieving efficient emission through rational crystal structure design remains a great challenge, and how the crystal structure affects the photophysical properties of 0D metal halides is currently unclear. Herein, a rational crystal structure regulation strategy in 0D Sb(III)-based metal halides is proposed to realize near-unity photoluminescence quantum yield (PLQY). Specifically, two 0D organic Sb(III)-based compounds with different coordination configurations, namely, (C₂₅H₂₂P)₂SbCl₅ and (C₂₅H₂₂P)SbCl₄ (C₂₅H₂₂P⁺ = benzyltriphenylphosphonium), were successfully obtained by precisely controlling the ratio of the initial raw materials. (C₂₅H₂₂P)₂SbCl₅ adopts an octahedral coordination geometry and shows highly efficient broadband yellow emission with a PLQY of 98.6%, while (C₂₅H₂₂P)SbCl₄ exhibits a seesaw-shaped [SbCl₄]^- cluster and does not emit light under photoexcitation. Theoretical calculations reveal that, by rationally controlling the coordination structure, the indirect bandgap of (C₂₅H₂₂P)SbCl₄ can be converted to the direct bandgap of (C₂₅H₂₂P)₂SbCl₅, thus ultimately boosting the emission intensity. Together with efficient emission and outstanding stability of (C₂₅H₂₂P)₂SbCl₅, a high-performance white-light emitting diode (WLED) with a high luminous efficiency of 31.2 lm W^-1 is demonstrated. Our findings provide a novel strategy to regulate the coordination structure of the crystals, so as to rationally optimize the luminescence properties of organic metal halides.

Boosting the Self-Trapped Exciton Emission in Cs2NaYCl6 Double Perovskite Single Crystals and Nanocrystals

Halide double perovskites have aroused substantial research interest because of their unique optical properties and intriguing flexibility for various compositional adjustments. Herein, we report the synthesis and photophysics of rare-earth element yttrium (Y)-based double perovskite single crystals (SCs) and nanocrystals (NCs). The pristine Cs₂NaYCl₆ bulk SCs exhibit a weak sky-blue emission with a low photoluminescence quantum yield (PLQY) of 7.68% based on the self-trapped exciton (STE), while no PL emission was observed for NCs. Excitingly, the STE emission of SCs and NCs is greatly enhanced via Sb³⁺ doping. The optimized Cs₂NaYCl₆:Sb³⁺ SCs and NCs exhibit high PLQYs up to 82.5% and 51.8%, respectively. Theoretical calculations and charge-carrier dynamic studies demonstrate that the giant emission enhancement after Sb³⁺ doping is related with the enhancement of the sensitization of the emissive STE states, the passivating of the nonradiative carrier trapping processes, and the regulation of carrier-phonon coupling.

Organic Cation-Directed Modulation of Emissions in Zero-Dimensional Hybrid Tin Bromides

Zero-dimensional hybrid metal halides (0D HMHs) are attractive due to their intriguing self-trapped exciton (STE) emission properties. However, the effect of organic cations on the emission of 0D HMHs is relatively underexplored. Herein, we report two types of 0D hybrid tin bromides, (BMe)₂SnBr₆ (BMe = C₈N₂H₁₈) and (MeH)₂SnBr₆ (MeH = C₇N₂H₁₆), which share similar structural features with different hydrogen bonding (HB) interactions between [SnBr₆]^4- anions and organic cations. The (BMe)₂SnBr₆ with weak HB interactions exhibits only STE emission, while the (MeH)₂SnBr₆ exhibits both STE and charge transfer exciton emissions owing to the strong HB interactions, resulting in an excitation-dependent emission at cryogenic conditions. Detailed structural analyses and Hirshfeld surface calculations confirm that the enhanced HB interactions are essential to obtain the multiple emissions in (MeH)₂SnBr₆.

H2O-NH4+-Induced Emission Modulation in Sb3+-Doped (NH4)2InCl5·H2O

Lead-based metal halide perovskites have received widespread attention for their promising application prospects in the field of lighting and display due to their excellent optical properties. However, the toxicity of lead may hinder their further commercial application. Herein, a zero-dimensional (0D) metal halide (NH₄)₂InCl₅·H₂O with an orthorhombic structure and the Pnma space group was produced. With doping with Sb³⁺, these products exhibit one highly efficient and wide yellow emission band (∼450-850 nm) in their photoluminescence (PL) spectra, which covers almost the entire visible spectral range at room temperature; however, they give two emission bands with long decay lifetimes (microseconds) at low temperature. Temperature-dependent steady-state PL, transient PL spectroscopy, temperature-dependent Raman spectra characterization, and theoretical band structure calculations confirm that the dual-band emission at low temperature originates from the dual vibronic levels of the self-trapped exciton (STE) in the hole-vibration state, whose vibration energy is related to the H₂O-NH₄⁺ connection in the valence band. This result proves that the vibronic state in STE formation involves both electrons and holes in the excited states, the opposite of this happens in the electron-vibration band in most perovskite halides. These results provide new insight into the luminescent mechanism of Sb³⁺ in halide perovskites, especially used for emission color modulation by the temperature-dependent electron- or hole-vibration processes.

Antimony -doped indium-based halide single crystals enabling white-light emission

Metal halides (TMPL)3InCl6·EtOH:xSb3+ with tunable colors were obtained by gradient Sb3+ doping. Interestingly, white emission was achieved when 0.1% of Sb3+ was employed, due to a combination of the cyan emission of organic moiety and orange emission from metal halides.