Robust Al3+ MOF with Selective As(V) Sorption and Efficient Luminescence Sensing Properties toward Cr(VI)

Three coordination polymers based on 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether: Synthesis, structure and selective fluorescent sensing properties

Three CPs [Zn2(PDA)2(BMIOPE)2·3H2O]n (1), [Co(Br-BDC)(BMIOPE)]n (2) and [Co(MIP)(BMIOPE)]n (3) were synthesized by solvothermal method based on dual-ligand strategy (H2PDA, Br-H2BDC, BMIOPE and H2MIP are 1,3-phenylenediacetic acid, 5-bromo-isophthalic acid, 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether and 5-methylisophthalic acid, respectively). Complexes 1 and 3 exhibit twofold parallel interwoven sql nets. Complex 2 is 2D layer structure. The luminescence property investigations showed that complexes 1-3 could act as multi-responsive fluorescent sensors to detect UO22+, Cr2O72- and CrO42- and nitrofurantoin (NFT) through fluorescence turn-off process, presenting excellent sensitivity and selectivity. Finally, the possible fluorescent quenching mechanisms of complexes 1-3 toward the above pollutants are also further investigated by employing spectroscopic methods and quantum chemical calculations. The fluorescence lifetime measurements manifest the mechanism of fluorescence quenching is static quenching process.

Bimetal-Organic Frameworks Incorporating Both Hard and Soft Base Active Sites for Heavy Metal Ion Capture

The design and synthesis of stable porous materials capable of removing both hard and soft metal ions pose a significant challenge. In this study, a novel metal-organic framework (MOF) adsorbent named CdK-m-COTTTB was developed. This MOF material was constructed using sulfur-rich m-cyclooctatetrathiophene-tetrabenzoate (m-H4COTTTB) as the organic ligand and oxygen-rich bimetallic clusters as the inorganic nodes. The incorporation of both soft and hard base units within the MOF structure enables effective removal of various heavy metal ions, including both soft and hard acid species. In single-component experiments, the adsorption capacity of CdK-m-COTTTB for Pb2+, Tb3+, and Zr4+ ions reached levels of 636.94, 432.90, and 357.14 mg·g-1, respectively, which is comparable to specific MOF absorbents. The rapid adsorption process was found to be chemisorption. Furthermore, CdK-m-COTTTB exhibited the capability to remove at least 12 different metal ions in both separate and multicomponent solutions. The material demonstrated excellent acid-base stability and renewability, which are advantageous for practical applications. CdK-m-COTTTB represents the first reported pristine MOF material for the removal of both hard and soft acid metal ions. This work serves as inspiration for the design and synthesis of porous crystalline materials that can efficiently remove diverse heavy metal pollutants.

Thiol-Functionalized MIL-100(Fe)/Device for the Removal of Heavy Metals in Water

The preparation of a functional device based on a functionalized MIL-100(Fe) metal-organic framework for the solid-phase extraction of heavy metals is reported. By a simple and easy straightforward grafting procedure, a thiol-functionalized MIL-100(Fe) material (MIL-100(Fe)-SH) with a S/Fe ratio of 0.80 and a surface area of 840 m2 g-1 was obtained. MIL-100(Fe)-SH exhibited a higher Hg(II) extraction (96 ± 5%) than that of MIL-100(Fe) (78 ± 4%) due to the interaction between thiol groups and Hg(II) ions. For practical applications, the obtained MIL-100(Fe)-SH was integrated by a simple method to a 3D printed support based on a matrix of interconnected cubes using poly(vinylidene fluoride) as binder, obtaining a functional device that simultaneously acts as stirrer and sorbent. The developed device showed high efficiency for the removal of Hg(II), good reusability, and excellent performance for the simultaneous preconcentration and further detection and quantification of Hg(II), Pb(II), and As(V) in tap, well, and lake water samples.

Two-Dimensional Lanthanide Metal-Organic Frameworks as a Platform for Sensing Pollutant and Nitrophenols Reduction

The discharge of harmful and toxic pollutants in water is destroying the ecosystem balance and human being health at an alarming rate. Therefore, the detection and removal of water pollutants by using stable and efficient materials are significant but challenging. Herein, three novel lanthanide metal-organic frameworks (Ln-MOFs), [La(L)(DMF)2(H2O)2]·H2O (LCUH-104), [Nd(L)(DMF)2(H2O)2]·H2O (LCUH-105), and [Pr(L)(DMF)2(H2O)2]·H2O (LCUH-106) [H3L = 5-(4-(tetrazol-5-yl)phenyl)isophthalic acid (H3TZI)] were solvothermally constructed and structurally characterized. In the three Ln-MOFs, dinuclear metallic clusters {Ln2} were connected by deprotonated tetrazol-containing dicarboxylate TZI3- to obtain a 2D layered framework with a point symbol of {42·84}·{46}. Their excellent chemical and thermal stabilities were beneficial to carry out fluorescence sensing and achieve the catalytic nitrophenols (NPs) reduction. Especially, the incorporation of the nitrogen-rich tetrazole ring into their 2D layered frameworks enables the fabrication of Pd nanocatalysts (Pd NPs@LCUH-104/105/106) and have dramatically enhanced catalytic activity by using the unique metal-support interactions between three Ln-MOFs and the encapsulating palladium nanoparticles (Pd NPs). Specifically, the reduction of NPs (2-NP, 3-NP, and 4-NP) in aqueous solution by Pd NPs@LCUH-104 exhibits exceptional conversion efficiency, remarkable rate constants (k), and outstanding cycling stability. The catalytic rate of Pd NPs@LCUH-104 for 4-NP is nearly 8.5 times more than that of Pd/C (wt 5%) and its turnover frequency value is 0.051 s-1, which indicate its excellent catalytic activity. Meanwhile, LCUH-105, as a multifunctional fluorescence sensor, exhibited excellent fluorescence detection of norfloxacin (NFX) (turn on) and Cr2O72- (turn off) with high selectivity and sensitivity at a low concentration, and the corresponding fluorescence enhancement/quenching mechanism has also been systematically investigated through various detection means and theoretical calculations.

Zinc(II)-Based Ring-and-Rod Coordination Layer as an Excitation-Wavelength-dependent Dual-Emissive Chemosensor for Discriminating Fe3+, Cr3+, and Al3+ in Water

The reactions of Zn(NO3)2, 3,6-bis(pyridin-3-yl)-9H-carbazole (bpycz), and 2,5-dihydroxyterephthalic acid (H4dhbdc) or 2-bromoterephthalic acid (Br-1,4-H2bdc) under hydro(solvo)thermal conditions yielded corresponding coordination polymers (CPs) {[Zn(H2dhbdc)(bpycz)]•0.5H2O}n (1) and [Zn(Br-1,4-bdc)(bpycz)]•2DMAc•H2O (2), respectively, with high thermal stability approaching 350 °C. CP 1 adopts a ring-and-rod layer structure, which is topologically described as a 4-connected net with the point symbol of 2•65. Two layers are interpenetrated in parallel interlocking mode to form a double 2D → 2D polyrotaxane entanglement with extra-framework void space of 19.6%. CP 2 has a non-interpenetrating ring-and-rod layer structure of 4-connected 2•65 net topology, with extra-framework void space of 16.6%. Thermally activated 1 and 2 revealed CO2 uptakes of 101.1 and 98.6 cm3 g-1, respectively, at P/P0 = 1 and 195 K. X-ray powder diffraction (XRPD) patterns confirmed that 1 and 2 both possessed high chemical stability in H2O, CH3OH, acetone, and DMF, and framework stability during gas adsorption-desorption. The H2O suspension of 1 displayed excitation-dependent dual-emissive properties, appearing at 432 nm upon excitation at 300 nm and at 528 nm upon excitation at 365 nm. Of note, 1 was capable of detection of Fe3+, Cr3+, and Al3+ ions in H2O, showing good anti-interference ability, excellent selectivity, and high sensitivity. More interesting, the dual-emissive properties make 1 to be an excellent luminescence chemosensor to screen Fe3+, Cr3+, and Al3+ from a pool of metal ions in H2O upon excitation at 300 nm via luminescence quenching effect and then discriminate Fe3+, Cr3+, and Al3+ upon excitation at 365 nm via luminescence quenching, unaltered, and enhancement responses, respectively. On the other hand, the H2O suspension of 2 demonstrated an excitation-independent emission appearing at around 430 nm, which could be utilized to sensitively detect Fe3+ and Cr3+ ions with good anti-interference ability and excellent selectivity via luminescence quenching effect. Further, 1 and 2 were recyclability and possessed cycling stability. The plausible sensing mechanisms for 1 and 2 toward Fe3+, Cr3+, and Al3+ were also explored in detail.

Metal-organic frameworks (MOFs) based luminescent and electrochemical sensors for food contaminant detection

With the increasing population, food toxicity has become a prevalent concern due to the growing contaminants of food products. Therefore, the need for new materials for toxicant detection and food quality monitoring will always be in demand. Metal-organic frameworks (MOFs) based on luminescence and electrochemical sensors with tunable porosity and active surface area are promising materials for food contaminants monitoring. This review summarizes and studies the most recent progress on MOF sensors for detecting food contaminants such as pesticides, antibiotics, toxins, biomolecules, and ionic species. First, with the introduction of MOFs, food contaminants and materials for toxicants detection are discussed. Then the insights into the MOFs as emerging materials for sensing applications with luminescent and electrochemical properties, signal changes, and sensing mechanisms are discussed. Next, recent advances in luminescent and electrochemical MOFs food sensors and their sensitivity, selectivity, and capacities for common food toxicants are summarized. Further, the challenges and outlooks are discussed for providing a new pathway for MOF food contaminant detection tools. Overall, a timely source of information on advanced MOF materials provides materials for next-generation food sensors.

Ni2P-Modified P-Doped Graphitic Carbon Nitride Hetero-Nanostructures for Efficient Photocatalytic Aqueous Cr(VI) Reduction

Targeting heterostructures with modulated electronic structures and efficient charge carrier separation and mobility is an effective strategy to improve photocatalytic performance. In this study, we report the synthesis of 2D/3D hybrid heterostructures comprising P-doped graphitic carbon nitride (g-C3N4) nanosheets (ca. 50–60 nm in lateral size) and small-sized Ni2P nanoparticles (ca. 10–12 nm in diameter) and demonstrate their prominent activity in the photocatalytic reduction of Cr(VI). Utilizing a combination of spectroscopic and electrochemical characterization techniques, we unveil the reasons behind the distinct photochemical performance of these materials. We show that Ni2P modification and P doping of the g-C3N4 effectively improve the charge-carrier transportation and spatial separation through the interface of Ni2P/P-doped g-C3N4 junctions. As a result, the catalyst containing 15 wt.% Ni2P exhibits superior photocatalytic activity in the detoxification of Cr(VI)-contaminated effluents under UV-visible light illumination, presenting an apparent quantum yield (QY) of 12.5% at 410 nm, notably without the use of sacrificial additives. This study marks a forward step in understanding and fabricating cost-effective photocatalysts for photochemical applications.

Highly efficient sorption and luminescence sensing of oxoanionic species by 8-connected alkyl-amino functionalized Zr4+ MOFs

Alkylamino-functionalized Zr4+ MOFs with 8-c nets and easily exchangeable terminal OH−/H2O ligands show remarkable sorption efficiency for toxic and radionuclide-related oxoanions and sensing capability for hexavalent chromium in ppb levels.

Sensing and photocatalytic properties of a new 3D Co(ii) coordination polymer based on 1,1′-di(p-carboxybenzyl)-2,2′-biimidazole

One novel 3D interpenetrated Co(ii) CP acts as multi-functional chemosensors in detection of Fe3+, Cr2O72−, CrO42− and nitrofurantoin and is an effective and stable photocatalyst and displays excellent photo-catalytic properties.