Role of Pt and PtO2 in the Oxygen-Evolution Reaction in the Presence of Iron under Alkaline Conditions

Lead in the Presence of Iron under Alkaline Conditions for the Oxygen-Evolution Reaction

The oxygen-evolution reaction (OER) is a bottleneck in water splitting, which is a critical process for energy storage. In this study, the electrochemistry of Pb in the absence or presence of K2FeO4, as a soluble Fe source, is examined at pH ≈ 13. Our findings indicate that Pb exhibits limited catalytic activity for the OER under alkaline conditions. However, upon the addition of K2FeO4 to the electrolyte, a significant enhancement in the OER activity is observed in the presence of Pb. A notable observation in this study is the formation of stable Fe(IV) species following the OER during chronoamperometry experiments conducted in an alkaline solution. In addition to in situ Raman and visible spectroscopies, the operated electrodes have been characterized by high-resolution transmission electron microscopy, scanning electron microscopy, electron spin resonance spectroscopy, X-ray diffraction, electrochemical methods, electron paramagnetic resonance, and X-ray absorption spectroscopy. Through our experimental investigations, it is consistently observed that the presence of Fe ions on the surface of Pb/PbOx serves as an effective catalyst for the OER. However, it is important to note that this heightened OER activity is only temporary due to the low adhesion of Fe ions on the surface of Pb/PbOx.

Dynamic Changes of an Anodized FeNi Alloy during the Oxygen Evolution Reaction under Alkaline Conditions

An efficient and durable oxygen evolution reaction (OER) catalyst is necessary for the water-splitting process toward energy conversion. The OER through water oxidation reactions could provide electrons for H2O, CO2, and N2 reduction and produce valuable compounds. Herein, the FeNi (1:1 Ni/Fe) alloy as foam, after anodizing at 50 V in a two-electrode system in KOH solution (1.0 M), was characterized by Raman spectroscopy, diffuse reflectance spectroscopy (DRS), X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), high-angle annular dark-field imaging (HAADF)-scanning transmission electron microscopy (STEM) and used as an efficient and durable OER electrocatalyst in KOH solution (1.0 M). The overpotential for the onset of the OER based on extrapolation of the Tafel plot was 225 mV. The overpotentials for the current densities of 10 and 30 mA/cm2 are observed at 270 and 290 mV, respectively. In addition, a low Tafel slope is observed, 38.0 mV per decade, for the OER. To investigate the mechanism of the OER, in situ surface-enhanced Raman spectroscopy was used to detect FeNi hydroxide and characteristic peaks of H2O. Impurities in KOH can adsorb onto the electrode surface during the OER. Peaks corresponding to Ni(III) (hydr)oxide and FeO42- can be detected during the OER, but high-valent FeNi (hydr)oxides are unstable and reduce under the open circle potential. Metal hydroxide transformations during the OER and anion adsorption should be carefully considered. In addition, Fe3O4 may convert to γ-Fe2O3 during the OER. This study aims to offer logical perspectives on the dynamic changes that occur during the OER under alkaline conditions in an anodized FeNi alloy. These changes encompass variations in morphology, surface oxidation, the generation of high-valent species, and phase conversion during the OER.

Effects of Iron Species on Low Temperature CO2 Electrolyzers

Electrochemical energy conversion devices are considered key in reducing CO2 emissions and significant efforts are being applied to accelerate device development. Unlike other technologies, low temperature electrolyzers have the ability to directly convert CO2 into a range of value-added chemicals. To make them commercially viable, however, device efficiency and durability must be increased. Although their design is similar to more mature water electrolyzers and fuel cells, new cell concepts and components are needed. Due to the complexity of the system, singular component optimization is common. As a result, the component interplay is often overlooked. The influence of Fe-species clearly shows that the cell must be considered holistically during optimization, to avoid future issues due to component interference or cross-contamination. Fe-impurities are ubiquitous, and their influence on single components is well-researched. The activity of non-noble anodes has been increased through the deliberate addition of iron. At the same time, however, Fe-species accelerate cathode and membrane degradation. Here, we interpret literature on single components to gain an understanding of how Fe-species influence low temperature CO2 electrolyzers holistically. The role of Fe-species serves to highlight the need for considerations regarding component interplay in general.

Advances in platinum-based and platinum-free oxygen reduction reaction catalysts for cathodes in direct methanol fuel cells

Direct methanol fuel cells (DMFCs) have been the focus of future research because of their simple structure, abundant fuel sources, high energy conversion efficiency and low cost. Among the components in DMFC, the activity and stability of the cathode catalyst is the key to the performance and lifetime of the DMFCs. Oxygen reduction reaction (ORR) is an important electrode reaction on DMFC cathode. It is known that Pt is widely used in the fabrication of ORR catalysts, but the limited earth storage of Pt and its high price limit the use of Pt-based commercial catalysts in DMFCs. To overcome these problems, advances have been made on new low Pt-based catalysts and Pt-free catalysts in recent years. In this article, the development of novel ORR catalysts and the carbon supports is reviewed and discussed.

A copper(II) coordination compound under water-oxidation reaction at neutral conditions: decomposition on the counter electrode

In the context of energy storage, the oxygen-evolution reaction (OER, 2H₂O → O₂ + 4H⁺ + 4e^-) through the water-oxidation reaction is a thermodynamically uphill reaction in overall water splitting. In recent years, copper(II) coordination compounds have been extensively used for the OER. However, challenges remain in finding the mechanism of the OER in the presence of these metal coordination compounds. Herein, the electrochemical OER activity is investigated in the presence of a copper(II) coordination compound at pH ≈ 7. While the investigations on finding true catalysts for the OER are focused on the working electrode, herein, for the first time, the focus is on the decomposition of copper(II) coordination compound (CuL₃, L: 2,2'-bipyridine N,N'-dioxide) during the OER on the counter electrode toward the precipitation of copper(I) oxide and metallic Cu.

Catalysis of the Water Oxidation Reaction in the Presence of Iron and a Copper Foil

The oxygen evolution reaction (OER) can provide electrons for reducing water, carbon dioxide, and ammonia. On the other hand, copper compounds are among the most interesting OER catalysts. In this study, water oxidation of a Cu foil in the presence of K₂FeO₄, a soluble Fe source, under alkaline conditions (pH ≈ 13) is investigated using electrochemical methods, X-ray diffraction, X-ray photoelectron spectroscopy, in situ visible spectroelectrochemistry, Raman spectroscopy, and scanning electron microscopy. After the reaction of the Fe salt with the Cu foil, a remarkable improvement for OER is recorded, which indicates that either the Fe ions on the copper foil directly participate in OER or these ions are critical for activating copper ions on the surface toward OER. Indeed, a remarkable decrease (130 mV) in the overpotential is recorded for the Cu foil in the presence of [FeO₄]^2-. Tafel slopes for the Cu foil in the absence and presence of K₂FeO₄ are 113.2 and 46.4 mV/decade, respectively. X-ray photoelectron spectroscopy shows that there is a strong interaction between Cu(II) and Fe(III) on the surface of the Cu foil. During OER in the presence of Cu(II) (hydr)oxide, Cu(III) is detected. In situ visible spectroelectrochemistry shows that Cu and Fe ions are dynamically active and precipitate on the surface of the counter electrode during cyclic voltammetry (CV). The isotopic experimental data using H₂¹⁸O based on Raman spectroscopy show that there is no change in the lattice oxygen. All of these experiments adopt a new perspective on the role of Fe in OER in the presence of a Cu foil under alkaline conditions.

Anchoring Highly Dispersed Pt Electrocatalysts on TiOx with Strong Metal-Support Interactions via an Oxygen Vacancy-Assisted Strategy as Durable Catalysts for the Oxygen Reduction Reaction

Pt electrocatalysts with high activity and durability have still crucial issues for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). In this study, a novel catalyst consisting of Pt nanoparticles (NPs) on TiO_x/C composites (TiO_x-V_o-H/C) with abundant oxygen vacancies (V_o) is proposed, which is abbreviated as PTO-V_o-H/C. The introduction of V_o helps anchor highly dispersed Pt NPs with low loading and strengthen the strong metal-support interaction (SMSI), which benefits to the enhanced ORR catalytic activity. Moreover, the accelerated durability test (ADT) demonstrates the higher retention of ORR activity for PTO-V_o-H/C. Experimental and theoretical analyses reveal that electronic interactions between Pt NPs and TiO_x/C composite support give rise to an electron-rich Pt NPs and strong SMSI effect, which is favorable for the electron transfer and stabilization of Pt NPs. More importantly, the assembled PEMFC with PTO-V_o-H/C shows only 6.9% of decay on maximum power density after 3000 ADT cycles while the performance of Pt/C sharply decreased. This work provides a new insight into the unique vacancy regulation of dispersive Pt on metal oxides for superior ORR performance.

Surprisingly Low Reactivity of Layered Manganese Oxide toward Water Oxidation in Fe/Ni-Free Electrolyte under Alkaline Conditions

So far, many studies on the oxygen-evolution reaction (OER) by Mn oxides have been focused on activity; however, the identification of the best performing active site and corresponding catalytic cycles is also of critical importance. Herein, the real intrinsic activity of layered Mn oxide toward OER in Fe/Ni-free KOH is studied for the first time. At pH ≈ 14, the onset of OER for layered Mn oxide in the presence of Fe/Ni-free KOH happens at 1.72 V (vs reversible hydrogen electrode (RHE)). In the presence of Fe ions, a 190 mV decrease in the overpotential of OER was recorded for layered Mn oxide as well as a significant decrease (from 172.8 to 49 mV/decade) in the Tafel slope. Furthermore, we find that both Ni and Fe ions increase OER remarkably in the presence of layered Mn oxide, but that pure layered Mn oxide is not an efficient catalyst for OER without Ni and Fe under alkaline conditions. Thus, pure layered Mn oxide and electrolytes are critical factors in finding the real intrinsic activity of layered Mn oxide for OER. Our results call into question the high efficiency of layered Mn oxides toward OER under alkaline conditions and also elucidate the significant role of Ni and Fe impurities in the electrolyte in the presence of layered Mn oxide toward OER under alkaline conditions. Overall, a computational model supports the conclusions from the experimental structural and electrochemical characterizations. In particular, substitutional doping with Fe decreases the thermodynamic OER overpotential up to 310 mV. Besides, the thermodynamic OER onset potential calculated for the Fe-free structures is higher than 1.7 V (vs RHE) and, thus, not in the stability range of Mn oxides.