Understanding the Crystal Growth of Bismuth Chalcohalide Nanorods through a Self-Sacrificing Template Process: A Comprehensive Study

Review on synthetic approaches and PEC activity performance of bismuth binary and mixed-anion compounds for potential applications in marine engineering

Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds.

Mist Chemical Vapor Deposition of Bi13S18I2 for Photoelectrochemical-type Photodetection

Bismuth-based ternary compounds have attracted much attention owing to their various merits, such as low toxicity and tunable electrical and optical properties. However, these compounds are yet to be understood due to the lack of suitable targets limited by immature synthesis techniques. In this work, we aimed at the synthesis, properties investigation, and photodetection application of Bi13S18I2. Mist chemical vapor deposition was adopted for the deposition of the Bi13S18I2 thin film for the first time. The deposition mechanism was discussed from the perspective of crystal phase and surface morphology. Based on the Bi13S18I2 thin film synthesized at optimal temperature, we constructed a photoelectrochemical-type photodetector. The photodetection performance was evaluated from the points of electrolyte composition, working temperature, and bias voltage. This study would pave the way for the controllable synthesis and applications of bismuth-based ternary compounds.

Polarization-Sensitive Photodetector Based on High Crystallinity Quasi-1D BiSeI Nanowires Synthesized via Chemical Vapor Deposition

Bismuth chalcohalides (BiSeI and BiSI), a class of superior light absorbers, have recently garnered great attention owing to their promise in constructing next-generation optoelectronic devices. However, to date, the photodetection application of bismuth chalcohalides is still limited due to the challenge in controllable preparation. Herein, the synthesis of large-scale quasi-1D BiSeI nanowires via chemical vapor deposition growth is reported. By precisely tuning the growth temperature and the Se supply, it can effectively control the growth thermodynamics and kinetics of BiSeI crystal, and thus achieve high purity quasi-1D BiSeI nanowires with high crystal quality, uniform diameter, and tunable domain length. Theory and optical characterizations of the quasi-1D BiSeI nanowires reveal an indirect bandgap of 1.57 eV with prominent optical linear dichroism. As a result, the quasi-1D BiSeI nanowire-based photodetector demonstrates a broadband photoresponse (400-800 nm) with high responsivity of 5880 mA W-1 , fast response speed of 0.11 ms and superior air stability. More importantly, the photodetector displays strong polarization sensitivity (anisotropic ratio = 1.77) under the 532 nm light irradiation. This work will provide important guides to the synthesis of other quais-1D metal chalcohalides and shed light on their potential in constructing novel multifunctional optoelectronic devices.

Bismuth sulfoiodide (BiSI) nanorods: synthesis, characterization, and photodetector application

The nanorods of bismuth sulfoiodide (BiSI) were synthesized at relatively low temperature (393 K) through a wet chemical method. The crystalline one-dimensional (1D) structure of the BiSI nanorods was confirmed using high resolution transmission microscopy (HRTEM). The morphology and chemical composition of the material were examined by applying scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The average diameter of 126(3) nm and length of 1.9(1) µm of the BiSI nanorods were determined. X-ray diffraction (XRD) revealed that prepared material consists of a major orthorhombic BiSI phase (87%) and a minor amount of hexagonal Bi₁₃S₁₈I₂ phase (13%) with no presence of other residual phases. The direct energy band gap of 1.67(1)  eV was determined for BiSI film using diffuse reflectance spectroscopy (DRS). Two types of photodetectors were constructed from BiSI nanorods. The first one was traditional photoconductive device based on BiSI film on stiff glass substrate equipped with Au electrodes. An influence of light intensity on photocurrent response to monochromatic light (λ = 488 nm) illumination was studied at a constant bias voltage. The novel flexible photo-chargeable device was the second type of prepared photodetectors. It consisted of BiSI film and gel electrolyte layer sandwiched between polyethylene terephthalate (PET) substrates coated with indium tin oxide (ITO) electrodes. The flexible self-powered BiSI photodetector exhibited open-circuit photovoltage of 68 mV and short-circuit photocurrent density of 0.11 nA/cm² under light illumination with intensity of 0.127 W/cm². These results confirmed high potential of BiSI nanorods for use in self-powered photodetectors and photo-chargeable capacitors.

Recent Development Strategies for Bismuth-Driven Materials in Sustainable Energy Systems and Environmental Restoration

Bismuth(Bi)-based materials have gained considerable attention in recent decades for use in a diverse range of sustainable energy and environmental applications due to their low toxicity and eco-friendliness. Bi materials are widely employed in electrochemical energy storage and conversion devices, exhibiting excellent catalytic and non-catalytic performance, as well as CO₂ /N₂ reduction and water treatment systems. A variety of Bi materials, including its oxides, chalcogenides, oxyhalides, bismuthates, and other composites, have been developed for understanding their physicochemical properties. In this review, a comprehensive overview of the properties of individual Bi material systems and their use in a range of applications is provided. This review highlights the implementation of novel strategies to modify Bi materials based on morphological and facet control, doping/defect inclusion, and composite/heterojunction formation. The factors affecting the development of different classes of Bi materials and how their control differs between individual Bi compounds are also described. In particular, the development process for these material systems, their mass production, and related challenges are considered. Thus, the key components in Bi compounds are compared in terms of their properties, design, and applications. Finally, the future potential and challenges associated with Bi complexes are presented as a pathway for new innovations.

Heavy pnictogen chalcohalides for efficient, stable, and environmentally friendly solar cell applications

Solar cell technology is an effective solution for addressing climate change and the energy crisis. Therefore, many researchers have investigated various solar cell absorbers that convert Sunlight into electric energy. Among the different materials researched, heavy pnictogen chalcohalides comprising heavy pnictogen cations, such as Bi³⁺and Sb³⁺, and chalcogen-halogen anions have recently been revisited as emerging solar absorbers because of their potential for efficient, stable, and low-toxicity solar cell applications. This review explores the recent progress in the applications of heavy pnictogen chalcohalides, including oxyhalides and mixed chalcohalides, in solar cells. We categorize them into material types based on their common structural characteristics and describe their up-to-date developments in solar cell applications. Finally, we discuss their material imitations, challenges for further development, and possible strategies for overcoming them.