In Situ Generation of NiCoP Nanoparticles on a Bimetal-Organic Framework for High-Performance Supercapacitors

Construction of rod-like cobalt-pyridinedicarboxylic acid/MXene nanosheets composites for hydrogen evolution reaction and supercapacitor

Metal-organic frameworks (MOFs) have attracted considerable attention in the field of energy storage and conversion due to their large specific surface area, regulatable pore structure and composition. However, the poor electrical conductivity and few active sites of MOFs impede their application. Herein, highly conductive MXene nanosheets are introduced to modulate the electronic conductivity and structure of rod-like Co-pyridinedicarboxylic acid (Co-PDC), and thus enhancing the electrochemical performance of MOFs. The heterostructural Co-PDC/MXene (CPM) was facily synthesized at room temperature. The as-prepared CPM-30 with 30 % MXene only requires the overpotential of 75.1 mV to achieve a current density of 10 mA cm-2 for hydrogen evolution reaction (HER), and the assembled electrolytic cell with CPM-30 and RuO2 as cathode and anode electrodes can achieve a current density of 10 mA cm-2 at a voltage of 1.65 V. In addition, CPM-10 exhibits a high specific capacitance of 583.1 F g-1 at 0.5 A g-1 and an excellent rate performance of 41.6 % at 50 A g-1. Furthermore, the assembled asymmetric supercapacitor CPM-10//AC exhibited an energy density of 15.55 Wh kg-1 at a power density of 750 W kg-1 and excellent stability with a capacitance retention rate of 95 % after 10,000 cycles. The excellent electrochemical properties of Co-PDC/MXene are attributed to the unique structure and synergistic effect of Co-PDC and MXene.

Phosphorus/sulfur co-doped heterogeneous NiCoPxSy nanoarrays boosting overall water splitting

In the large-scale implementation of renewable energy devices, the availability of stable and highly catalytic non-precious metal catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial. Meanwhile, integrating bifunctional electrocatalysts simultaneously on both the anode and cathode still faces challenges. To address this, a stepped preparation strategy was adopted on a nickel foam (NF) substrate to synthesize P, S co-doped NiCoPxSy nanowire array catalysts. The prepared NiCoPxSy catalysts demonstrated a small Tafel slope of 72.5 mV dec-1 for HER and 72.3 mV dec-1 for OER by requiring only 37 mV (326 mV) overpotential to achieve a current density of 10 mA cm-2 (50 mA cm-2). Moreover, when assembled into an electrolytic cell in 1 M KOH, the NiCoPxSy catalysts achieved a low voltage of 1.55 V at 10 mA cm-2 current density and exhibited long-term stability. The outstanding electrocatalytic performance can be attributed to the influence of doped anions on the electronic states and distribution among different atoms, which thereby positively affected the electrocatalytic activity. This research provides an effective method for designing innovative catalysts and paving the way to produce clean energy.

Solvent-induced structural regulation over Ni2P/CNT hybrids towards boosting the performance of supercapacitors

Although nickel-based phosphides have attracted increasing attention due to their good theoretical specific capacity, the poor rate capability weakness their advantage in electrochemical energy storage. It is, however, challenging to improve these issues by only adjusting composition. Here, we employ a synergistic strategy, both hybridizing with highly conductive materials and regulating morphology, to enhance the electrochemical performance of Ni₂P. Based on solvent-induced effects, flower/rod-like [CH₃NH₃][Ni(HCOO)₃] precursors hybridized with CNTs are prepared and then employed as templates to construct flower/rod-like Ni₂P/CNT hybrids via a gas-solid phosphorization method. Benefiting from the synergistic advantages of both structure and components, the flower-like Ni₂P/CNT hybrid, as an electrode materials for supercapacitor, exhibit outstanding specific capacitance of up to 1480 F g^-1 at 1 A g^-1, as well as improved rate capability. Additionally, the assembled asymmetric supercapacitor (Ni₂P/CNTs//AC, ASC) delivers a high capacitance retention of up to 83.5% after 5000 cycles at 10 A g^-1, and an expected energy density of 25.2 W h kg^-1 at a power density of 749.8 W kg^-1.

In Situ Implantation of Bi2S3 Nanorods into Porous Quasi-Bi-MOF Architectures: Enabling Synergistic Dissociation of Borohydride for an Efficient and Fast Catalytic Reduction of 4-Nitrophenol

Catalytic hydrogenation reduction based on sodium borohydride (NaBH₄) has gained attention as an appealing "one-stone-two-birds" approach for the simultaneous elimination of nitroaromatic pollutants and the production of high-value aminoaromatics under mild conditions. However, the slow kinetics of NaBH₄ dissociation on the surface of catalysts restrict the catalytic hydrogenation reduction efficiency. Herein, we report an intelligent localized sulfidation strategy for an in situ implantation of Bi₂S₃ nanorods within quasi-Bi-MOF architectures (Bi₂S₃@quasi-Bi-MOF) by fine-tuning the pyrolysis temperature. In this novel Bi₂S₃@quasi-Bi-MOF, the porous quasi-Bi-MOF enables efficient adsorption of BH₄^- and 4-nitrophenol (4-NP), while Bi₂S₃ facilitates the BH₄^- dissociation to form H_ads* species adsorbed on the catalyst surface. Benefiting from the synergistic structure, Bi₂S₃@quasi-Bi-MOF exhibits excellent performance for the catalytic reduction of 4-NP, delivering a high turnover frequency (TOF) of 1.67 × 10^-4 mmol mg^-1 min^-1 and an extremely high normalized rate constant (k_nor) of 435298 s^-1 g^-1. The kinetic analysis and electrochemical tests indicate that this catalytic hydrogenation reduction follows the Langmuir-Hinshelwood mechanism. This study enriches the synthetic strategy of MOF-based derivatives and offers a new catalytic platform for hydrogenation reduction reactions.