Boosting the Activity of Single-Atom Pt1/CeO2 via Co Doping for Low-Temperature Catalytic Oxidation of CO

Natural biomass derived single-atom catalysts for energy and environmental applications

Single atom catalysts (SACs) excel in various chemical processes, including electrocatalysis and industrial chemistry, due to their efficiency. In contrast to chemically synthesized precursors, biomass offers a greener and more cost-effective approach for SACs fabrication. To date, over forty types of SACs have been synthesized using natural sources like starch, cellulose, lignin, hemicellulose, proteins, and chitin. These catalysts incorporate metals such as Fe, Co, Ni, Cu, Zn, Mn, and Pt. This review concentrates on the preparation of SACs from biomass, exploring innovative techniques and their extensive applications in energy conversion and environmental conservation, including but not limited to reactions involving oxygen reduction, oxygen evolution, and hydrogen evolution. It also discusses current challenges and prospective advancements in this domain. This paper updates and expands on the knowledge of SACs derived from biomass, aiming to foster the development of more effective, low-cost catalyst materials from natural sources.

Reduction of (100)-Faceted CeO2 for Effective Pt Loading

Although the function and stability of catalysts are known to significantly depend on their dispersion state and support interactions, the mechanism of catalyst loading has not yet been elucidated. To address this gap in knowledge, this study elucidates the mechanism of Pt loading based on a detailed investigation of the interaction between Pt species and localized polarons (Ce3+) associated with oxygen vacancies on CeO2(100) facets. Furthermore, an effective Pt loading method was proposed for achieving high catalytic activity while maintaining the stability. Enhanced dispersibility and stability of Pt were achieved by controlling the ionic interactions between dissolved Pt species and CeO2 surface charges via pH adjustment and reduction pretreatment of the CeO2 support surface. This process resulted in strong interactions between Pt and the CeO2 support. Consequently, the oxygen-carrier performance was improved for CH4 chemical looping reforming reactions. This simple interaction-based loading process enhanced the catalytic performance, allowing the efficient use of noble metals with high performance and small loading amounts.

Efficient optimization of the synthetic conditions for aerosol-assisted high-quality mesoporous CeO2 powders

The morphology of surfactant-assisted mesoporous metal oxides was tuned to obtain high surface-area particles by utilizing the synthetic conditions for fabricating transparent thin films through an evaporation-induced self-assembly (EISA) process. For investigating their potential applications, especially for designing heterogeneous catalysts, mesoporous metal oxides should be obtained in powder forms; however, a serious limitation associated with their reproducibility persists. Herein, along with a rapid optimization approach, starting from determining and improving chemical composition for the fabrication of mesoporous metal oxide films, an advanced approach to obtain highly porous metal oxide powders is presented using a temperature-controlled spray-drying process with step-by-step but smooth optimization by combining several EISA processes, involving the utilization of a precursor solution optimized for a slow-drying process in the case of ceria (CeO2) using poly(styrene)-block-poly(ethylene oxide) (PS-b-PEO).

Catalytic CO Oxidation on the Cu+-Ov-Ce3+ Interface Constructed by an Electrospinning Method for Enhanced CO Adsorption at Low Temperature

It is crucial to eliminate CO emissions using non-noble catalysts. Cu-based catalysts have been widely applied in CO oxidation, but their activity and stability at low temperatures are still challenging. This study reports the preparation and application of an efficient copper-doped ceria electrospun fiber catalyst prepared by a facile electrospinning method. The obtained 10Cu-Ce fiber catalyst achieved complete CO oxidation at a temperature as low as 90 °C. However, a reference 10Cu/Ce catalyst prepared by the impregnation method needed 110 °C to achieve complete CO oxidation under identical reaction conditions. Asymmetric oxygen vacancies (ASOV) at the interface between copper and cerium were constructed, to effectively absorb gas molecules involved in the reaction, leading to the enhanced oxidation of CO. The exceptional ability of the 10Cu-Ce catalyst to adsorb CO is attributed to its unique structure and surface interaction phase Cu+-Ov-Ce3+, as demonstrated by a series of characterizations and DFT calculations. This novel approach of using electrospinning offers a promising technique for developing low-temperature and non-noble metal-based catalysts.

Tuning the Interaction between Platinum Single Atoms and Ceria by Zirconia Doping for Efficient Catalytic Ammonia Oxidation

Aiming at the development of an efficient NH3 oxidation catalyst to eliminate the harmful NH3 slip from the stationary flue gas denitrification system and diesel exhaust aftertreatment system, a facile ZrO2 doping strategy was proposed to construct Pt1/CexZr1-xO2 catalysts with a tunable Pt-CeO2 interaction strength and Pt-O-Ce coordination environment. According to the results of systematic characterizations, Pt species supported on CexZr1-xO2 were mainly in the form of single atoms when x ≥ 0.7, and the strength of the Pt-CeO2 interaction and the coordination number of Pt-O-Ce bond (CNPt-O-Ce) on Pt1/CexZr1-xO2 showed a volcanic change as a function of the ZrO2 doping amount. It was proposed that the balance between the reasonable concentration of oxygen defects and limited surface Zr-Ox species well accounted for the strongest Pt-CeO2 interaction and the highest CNPt-O-Ce on Pt/Ce0.9Zr0.1O2. It was observed that the Pt/Ce0.9Zr0.1O2 catalyst exhibited much higher NH3 oxidation activity than other Pt/CexZr1-xO2 catalysts. The mechanism study revealed that the Pt1 species with the stronger Pt-CeO2 interaction and higher CNPt-O-Ce within Pt/Ce0.9Zr0.1O2 could better activate NH3 adsorbed on Lewis acid sites to react with O2 thus resulting in superior NH3 oxidation activity. This work provides a new approach for designing highly efficient Pt/CeO2 based catalysts for low-temperature NH3 oxidation.

CeO2/CuO/NiO hybrid nanostructures loaded on N-doped reduced graphene oxide nanosheets as an efficient electrocatalyst for water oxidation and non-enzymatic glucose detection

In this work, the three-component heterostructure of CeO₂/CuO/NiO was synthesized by a co-precipitation procedure and heating at a temperature of 750 °C. Then, CeO₂/CuO/NiO nanoparticles were successfully supported on N-doped reduced graphene oxide (N-rGO) by a hydrothermal method. The obtained nanomaterials were used as effective electrocatalysts for the oxygen evolution reaction and glucose sensing in an alkaline medium. The results indicated that when CeO₂/CuO/NiO is anchored on N-rGO nanosheets, active catalytic sites increase. On the other hand, N-doped rGO enhances electrical conductivity and electron transfer for water or glucose oxidation. CeO₂/CuO/NiO@N-rGO has a large electrochemically active surface area and more active catalytic positions, and thus exhibits high activity for the OER with a low overpotential of 290 mV, a suitable Tafel slope of 110 mV dec^-1, and superior stability and durability for at least 10 hours. CeO₂/CuO/NiO@N-rGO can also detect glucose with a high sensitivity of 912.7 μA mM^-1 cm^-2, a low detection limit of 0.053 μM, a wide linear range between 0.001 and 24 mM, and a short response time of about 2.9 s. Moreover, the high selectivity and stability of this electrode for glucose sensing show its potential for clinical applications.

Tuning Electron Transfer in Atomic-Scale Pt-Supported Catalysts for the Alkaline Hydrogen Oxidation Reaction

Developing efficient atomic-scale metal-supported catalysts is of great significance for energy conversion technologies. However, the precise modulation of electron transfer between the metal and supporter in atomic-scale metal-supported catalysts to further improve the catalytic activity is still a major challenge. Herein, we show tunable electron transfer between atomic-scale Pt and tungsten nitride/oxide supports (namely, Pt/WN and Pt/W₁₈O₄₉). Pt/WN with modest electron exchange and Pt/W₁₈O₄₉ with aggressive electron exchange exhibit notably different catalytic activities for the alkaline hydrogen oxidation reaction (HOR), in which Pt/WN shows a 5.7-fold enhancement in HOR intrinsic catalytic performance in comparison to Pt/W₁₈O₄₉. Additionally, the tunable electronic transfer at the interface of Pt/WN and Pt/W₁₈O₄₉, as proven by the theoretical calculation, resulted in the discrepancy of the adsorption free energy of the reaction intermediates, as well as catalytic activity, for the HOR process. Our work provides new insights into the design of advanced atomic-scale metal-supported catalysts for electrocatalysis.

Atomically Incorporating Ni into Mesoporous CeO2 Matrix via Synchronous Spray-Pyrolysis as Efficient Noble-Metal-Free Catalyst for Low-Temperature CO Oxidation

Low-temperature catalytic CO oxidation is an important chemical process in versatile applications, such as the H₂ utilization for low-temperature H₂ air fuel cells. Pt-group metal catalysts are efficient but highly cost-consuming. This work demonstrates an excellent and sixpenny catalyst with earth-abundant Ni and Ce, in which Ni ions are atomically incorporated into the CeO₂ matrix (Ni-Ce-O_x) by synchronous spray-pyrolysis (SSP) of mixture nitrates of Ni and Ce. The Ni-Ce-O_x catalyst presents a mesoporous structure. Revealed by a model reaction of 1% CO, 1% O₂, and 98% balance He at a space velocity of 13,200 mL/g_cat/h, Ni-Ce-O_x catalysts display a typical volcano-shaped relationship between reactivity and Ni incorporation amount. The optimized Ni incorporation appears with a high Ni/Ce atomic ratio of 0.25, endowing the T₅₀ (temperature corresponding to a CO conversion of 50%), which is lower-shifted by 165 °C than that of pristine CeO₂ (266 °C). The density functional theory (DFT) calculations further indicate that the much-reduced oxygen vacancy formation energy at Ni-Ce single-atom sites boosted the adsorption activation of the CO molecule and therefore promoted the CO oxidation process. Besides, the₂ Ni-Ce-O_x from the SSP method presents better performance than the counterparts from immersion and hydrothermal methods. This work paves a way to access efficient noble-metal-free catalysts for low-temperature CO oxidation.