Fabrication of Protonated Two-Dimensional Metal-Organic Framework Nanosheets for Highly Efficient Iodine Capture from Water

Two Metal-Organic Frameworks with a Fused Cis-Decalin Conformation for Multimedia Iodine Capture

The extensive growth of nuclear power plants has a severe detrimental effect on human health and the surroundings due to the uncontrolled and unfiltered release of radioactive wastes into the environment. One such radioactive waste is 129I which has a fatal effect when released into the air or water bodies. Hence, molecular and ionic iodine capture from multimedia has become an important area of interest in the recent past. This work is aimed at introducing two 2D metal-organic frameworks with a fused cis-decalin conformation, {[Zn2(tpbn)(fdc)2]·6H2O}n (1) and {[Cd2(tpbn)(fdc)2(H2O)2]·2H2O}n (2), synthesized at room temperature utilizing a combination of M(OAc)2·2H2O (M: Zn/Cd), a neutral flexible ligand, tpbn, and a simple commercially available furan dicarboxylate, fdc2-, for the target application. The polarizing nature of the furan moieties and the oxygen rich pores in 1 and 2 facilitate the easy capture of molecular iodine from both the vapor phase and aqueous media with high uptake values. Furthermore, their efficiency was tested for the practical application under real-world conditions using river and seawater. In addition to confirming their recyclability with the retention of structural integrity, the interaction between 1 and 2 with iodine has also been established with experimental and theoretical calculations.

Fabrication of Carboxylate-Functionalized 2D MOF Nanosheet with Caged Cavity for Efficient and Selective Extraction of Uranium from Aqueous Solution

The efficient removal of radioactive uranium from aqueous solution is of great significance for the safe and sustainable development of nuclear power. An ultrathin 2D metal-organic framework (MOF) nanosheet with cavity structures was elaborately fabricated based on a calix[4]arene ligand. Incorporating the permanent cavity structures on MOF nanosheet can fully utilize its structural characteristics of largely exposed surface area and accessible adsorption sites in pollutant removal, achieving ultrafast adsorption kinetics, and the functionalized cavity structure would endow the MOF nanosheets with the ability to achieve preconcentration and extraction of uranium from aqueous solution, affording ultrahigh removal efficiency even in ultra-low concentrations. Thus, more than 97% uranium can be removed from the concentration range of 50-500 µg L-1 within 5 min. Moreover, the 2D nano-material exhibits ultra-high anti-interference ability, which can efficiently remove uranium from groundwater and seawater. The adsorption mechanism was investigated by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) analysis, and density functional theory (DFT) calculations, which revealed that the cavity structure plays an important role in uranium capture. This study not only realizes highly efficient uranium removal from aqueous solution but also opens the door to achieving ultrathin MOF nanosheets with cavity structures, which will greatly expand the applications of MOF nanosheets.

Fabrication of Polysulfone Beads Containing Covalent Organic Polymer as a Versatile Platform for Efficient Iodine Capture

Radioactive iodine poses a significant risk to human health, particularly with regard to reproductive and metabolic functions. Designing and developing highly efficient adsorbent materials for radioactive substances remain a significant challenge. This study aimed to address this issue by the fabricating polymeric beads containing covalent organic polymer (COP) as an effective method for removing iodine vapor. To achieve this, a COP was first synthesized via the Friedel-Crafts reaction catalyzed by anhydrous aluminum chloride. Then, COP-loaded polysulfone (PSf) (COP@PSf) and PSf beads were prepared using a phase separation method. The beads produced in this research have exhibited remarkable proficiency in adsorbing iodine vapor, showing an adsorption capacity of up to 216 wt % within just 420 min, which is higher than that of most other similar beads reported in the literature.

Enhancing Iodine Capture of Porous Organic Cages through N-Heteroatom Engineering

Iodine radioisotopes, produced or released during nuclear-related activities, severely affect human health and the environment. The efficient removal of radioiodine from both aqueous and vapor phases is crucial for the sustainable development of nuclear energy. In this study, we propose an "N-heteroatom engineering" strategy to design three porous organic cages with N-containing functional groups for efficient iodine capture. Among the molecular cages investigated, FT-Cage incorporating tertiary amine groups and RT-Cage with secondary amine groups show higher adsorption capacity and much faster iodine release compared to IT-Cage with imine groups. Detailed investigations demonstrate the superiority of amine groups, along with the influence of crystal structures and porosity, for iodine capture. These findings provide valuable insights for the design of porous organic cages with enhanced capabilities for capturing iodine.

Tröger's Base-Enriched Conjugated Cyclopentannulated Copolymers: Prominent Adsorbents of CO2, H2, and Iodine

Three copolymers with conjugated structures, PTB1-PTB3, were produced utilizing a palladium-catalyzed cyclopentannulation polymerization by reacting a specially designed diethynyl Tröger's base surrogate with different dihalogenated polycondensed aromatic hydrocarbons. Brunauer, Emmet, and Teller nitrogen gas adsorption investigation revealed the surface areas of the copolymers, attaining ∼365 m2 g-1. Gas uptake studies demonstrated a considerable carbon dioxide uptake for PTB2 of 44.41 mg g-1 at 273 K and a promising H2 gas uptake of 3.18 mg g-1 at 77 K. PTB1-PTB3 displayed a sizable iodine adsorption capacity, achieving 4000 mg g-1, and mechanistic investigations demonstrated the prevalence of a pseudo-second-order kinetic model. Recyclability experiments proved the effective regeneration of the copolymers, even after performing several adsorption and desorption tests.

Coordination-Driven Heterochiral Self-Assembly: Construction of Cd(II) Coordination Polymers with Sorption Behaviors for Iodine and Dyes

A racemic bispyridyl ligand (L) was synthesized via a Schiff base condensation reaction. Four Cd(II) complexes, {[CdL2Cl2]·2DMF}n (1), [CdLI2]n (2), {[CdL2Br2]·4H2O}n (3), and {[CdL2(H2O)2](NO3)2·2CH3OH·8H2O}n (4), were synthesized and further characterized based on this ligand. Single-crystal structures show that the coordination-driven assembly of the bispyridyl ligand with Cd(II) salts bearing different counteranions can lead to multidimensional coordination polymers via a heterochiral self-discrimination process. Complex 1 exists as a one-dimensional (1D) looped chain polymer, and complex 2 exists as a 1D zigzag chain polymer. Complex 3 is a 2D grid coordination polymer, and complex 4 exists as a 3D framework polymer. Furthermore, the iodine sorption capacities of the four complexes were investigated in the solution of n-hexane and water as well as in the iodine steam. The dye sorption behaviors were investigated in water, which showed that complex 2 exhibited good adsorption for crystal violet (CV), while complex 4 had good adsorption capability toward direct yellow 4 (DY).

Iodine and Nickel Ions Adsorption by Conjugated Copolymers Bearing Repeating Units of Dicyclopentapyrenyl and Various Thiophene Derivatives

The synthesis of three conjugated copolymers TPP1-3 was carried out using a palladium-catalyzed [3+2] cycloaddition polymerization of 1,6-dibromopyrene with various dialkynyl thiophene derivatives 3a-c. The target copolymers were obtained in excellent yields and high purity, as confirmed by instrumental analyses. TPP1-3 were found to divulge a conspicuous iodine adsorption capacity up to 3900 mg g-1, whereas the adsorption mechanism studies revealed a pseudo-second-order kinetic model. Furthermore, recyclability tests of TPP3, the copolymer which revealed the maximum iodine uptake, disclosed its efficient regeneration even after numerous adsorption-desorption cycles. Interestingly, the target copolymers proved promising nickel ions capture efficiencies from water with a maximum equilibrium adsorption capacity (qe) of 48.5 mg g-1.

Novel Biocompatible Trianglamine Networks for Efficient Iodine Capture

Herein, we report for the first time a biocompatible cross-linked trianglamine (Δ) network for the efficient iodine removal from the vapor phase, water, and seawater. In the vapor phase, the cross-linked network could capture 6 g g-1 of iodine, ranking among the most performant materials for iodine vapor capture. In the liquid phase, this cross-linked network is also capable of capturing iodine at high rates from aqueous media (water and seawater). This network displayed fast adsorption kinetics, and they are fully recyclable. This study reveals the high affinity of iodine for the intrinsic cavity of the trianglamine. The synthesized materials are extremely interesting since they are environmentally friendly and inexpensive and the synthesis could easily be scaled up to be used as the material of choice in response to accidents in the nuclear industry.

A Porous π-Stacked Self-Assembly of Cup-Shaped Palladium Complex for Iodine Capture

Acquiring adsorbents capable of effective radioiodine capture is important for nuclear waste treatment; however, it remains a challenge to develop porous materials with high and reversible iodine capture. Herein, we report a porous self-assembly constructed by a cup-shaped Pd^II complex through intermolecular π···π interactions. This self-assembly features a cubic structure with channels along all three Cartesian coordinates, which enables it to efficiently capture iodine with an adsorption capacity of 0.60 g g^-1 for dissolved iodine and 1.81 g g^-1 for iodine vapor. Furthermore, the iodine adsorbed within the channels can be readily released upon immersing the bound solid in CH₂Cl₂, which allows the recycling of the adsorbent. This work develops a new porous molecular material promising for practical iodine adsorption.

Exploiting a Multi-Responsive Oxadiazole Moiety in One Three-Dimensional Metal-Organic Framework for Remedies to Three Environmental Issues

Multifunctional metal-organic frameworks (MOFs) rely on the properties of metal centers (nodes) and/or linkers (struts) for their diverse applications in the emerging field of research. Currently, there is a huge demand for MOF materials in the field of capture/fixation/sensing of air pollutants, harmful chemical effluents, and nuclear waste. However, it is a challenging task to utilize one MOF for providing remedies to all these issues. On the basis of our current research activities, we have identified that an oxadiazole moiety-a five-membered ring with two different heteroatoms (O and N)-in a carboxylate linker can be the key to generating such MOF materials for its (a) inherent polarizable nature and molecular docking ability and (b) photoluminescence properties. In this work, we report a 3D MOF {[Co₂(oxdz)₂(tpbn)(H₂O)₂]·4H₂O}_n (1), self-assembled at room temperature from a three-component reaction, with an oxadiazole moiety (where H₂oxdz = 4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoic acid and tpbn = N,N',N,"N″'-tetrakis(2-pyridylmethyl)-1,4-diaminobutane). The inherent polarizable nature of the oxadiazole moiety in 1 has been efficiently exploited for (i) multimedia iodine capture and (ii) fixation of CO₂ under solvent-free and ambient conditions. On the other hand, the luminescent nature of the framework is found to be an efficient, highly preferred turn-on sensor for the ultra-fast detection of ketones with a limit as low as parts-per-trillion (mesitylene oxide: 447 ppt; cycloheptanone: 4.7 ppb; cyclohexanone: 17.2 ppb; acetylacetone: 18 ppb).

Synthesis and Iodine Adsorption Properties of Organometallic Copolymers with Propeller-Shaped Fe(II) Clathrochelates Bridged by Different Diaryl Thioether and Their Oxidized Sulfone Derivatives

Three organometallic copolymers, ICP1-3, containing iron(II) clathrochelate units with cyclohexyl lateral groups and interconnected by various thioether derivatives were synthesized. The reaction of the latter into their corresponding OICP1-3 sulfone derivatives was achieved quantitatively using mild oxidation reaction conditions. The target copolymers, ICP1-3 and OICP1-3, were characterized by various instrumental analysis techniques, and their iodine uptake studies disclosed excellent iodine properties, reaching a maximum of 360 wt.% (q_e = 3600 mg g^-1). The adsorption mechanisms of the copolymers were explored using pseudo-first-order and pseudo-second-order kinetic models. Furthermore, regeneration tests confirmed the efficiency of the target copolymers for their iodine adsorption even after several adsorption-desorption cycles.