Solvent-Modulated Self-Assembly of Naphthalenediimide-Based Cd(II) Complexes and the Controllable Photochromism via Conformational Isomerization

Dynamic Fluorescence Sensing of Bromide Ions by Photochromic Bi(III)-Coordination Polymers Based on a Ligand Integrated by Naphthalene Diimides and Pyridinium in Solution and Films

Bismuth(III)-based complexes have garnered increasing attention in fluorescence sensing due to their environmentally friendly and sustainable characteristics. A Bismuth(III) coordination polymer (CP),1-Cl based on a naphthalene diimides(NDI)-pyridinium is synthesized by an in situ reaction method. Notable for its sensitivity to visible light, 1-Cl shows excellent photochromic properties, and the integration of NDI and pyridinium in one ligand makes photogenerated radicals more stable. Structural analysis and theoretical calculations are employed to investigate the potential pathway of photoinduced electron transfer (ET) during the photochromic process. Notably, in aqueous solutions, 1-Cl displays an extraordinary fluorescence enhancement response to bromide ion (Br-), resulting in a distinct transition from yellow to orange in color. The potential mechanism of fluorescence sensing has been revealed through single-crystal X-ray diffraction analysis. This insight highlights a continuous substitution process where the Cl- ions are successively replaced by Br- ions. Consequently, a single-crystal-to-single-crystal transformation (SCSC) occurs, yielding the intermediate species, 1-Cl-Br, which ultimately transforms into the final product, 1-Br. Finally, the photochromic film is successfully prepared and applied to practical applications such as ink-free printing, information anti-counterfeiting, and the visual detection of Br- ions. This work combines photochromism with fluorescence sensing, broadening the research field and practical application of photochromic materials.

X-ray-triggered through-space charge transfer and photochromism in silver nanoclusters

Materials exhibiting X-ray-induced photochromism have consistently piqued the interest of researchers. Exploring the photochromic properties of such materials is valuable for understanding the structural changes and electron transfer processes that occur under high energy radiation, such as X-ray irradiation. Here, a crystalline silver(I) nanocluster synthesized from tert-butylacetylene silver was found to have the ability to exhibit color and photoluminescence changes upon exposure to X-ray radiation. The responsive behavior was observed across a wide temperature range of 100-300 K, with the ability to respond particularly well to soft X-rays (λ > 1 Å) and exhibit light responsiveness to hard X-rays (λ < 1 Å). By combining experimental findings including X-ray diffraction, X-ray photoelectron spectroscopy, electron spin resonance, etc. with theoretical calculations, we have proposed that X-ray irradiation induces electron transfer from chloride (Cl-) located in the center of the silver(I) nanocluster to the surrounding Ag14 in the skeleton. This represents the first documented example in which electron transfer induced by X-ray excitation has been observed, accompanied by a photochromism process, in silver nanoclusters. This study contributes to our understanding of X-ray-induced photochromism and the electron transfer process in silver cluster compounds. It also provides valuable insights and potential design strategies for applications such as photochromism, photoluminescence color change, and photoenergy conversion.

Electron density effect of aromatic carboxylic acids in naphthalenediimide-based coordination polymers: from thermal electron transfer and charge transfer to photoinduced electron transfer

Various naphthalenediimide (NDI) based electron donor-acceptor coordination polymers (D-A CPs) have been constructed and used to explore charge transfer (CT) and electron transfer (ET) behaviors. Up to now, significant progress has been made in the interface contact and electron donor-acceptor ability matching mechanism, while the electronic density effect of the electron donors on the CT and ET behaviors is still not known. Herein, two NDI-based D-A CPs, [Cd2(H2NDI)(IPA)2(H2O)2] (1) and [Cd2(H2NDI)(IPA-OH)2(H2O)2] (2), are constructed using an NDI-based ligand and two aromatic carboxylic acid ligands (H2NDI = 2,7-bis(3,5-dimethyl) dipyrazol-1,4,5,8-naphthalene tetracarboxydiimide, H2IPA = isophthalic acid; and H2IPA-OH = 5-hydroxyisophthalic acid). UV-vis and EPR spectroscopy and DFT calculations analyses reveal that the occurrence of themal electron transfer (TET) in 1 and 2 results from the HOMO of the IPA and IPA-OH lying higher than the LUMO of the NDI. Meanwhile, compared to 1, the UV-vis absorption spectrum of 2 exhibits a significant red shift, which suggests higher electron density of the donor and more electron transfer pathways are beneficial for the occurrence of intermolecular CT. After UV light irradiation, the comparison of the photochromic behavior of 1 and 2 confirms the negative effect of the stronger CT on photoinduced electron transfer (PET). The present study illustrates the delicate modulating effect of electron density on the CT and ET behaviors in D-A CPs.

Dual Photo-/Electrochromic Pyromellitic Diimide-Based Coordination Polymer

By the combination of N,N'-bis(carboxymethyl)-pyromellitic diimide (H2CMPMD, 1) and zinc ions, a novel PMD-based coordination polymer (CP), [Zn(CMPMD)(DMF)1.5]·0.5DMF (2) (DMF = N,N'-dimethylformamide), has been prepared and characterized. 1 and 2 exhibit completely different photochromic properties, which are mainly reflected in the photoresponsive rate (5 s for 1 vs 1 s for 2) and coloration contrast (from colorless to light green for 1 vs green for 2). This phenomenon should be attributed to the introduction of zinc ions and the consequent formation of the distinct interfacial contacts of electron donors (EDs) and electron acceptors (EAs) (dn-π = 3.404 and 3.448 Å for 1 vs dn-π = 3.343, 3.359, 3.398, and 3.495 Å for 2), suggesting a subtle modulating effect of metal ions on interfacial contacts, photoinduced intermolecular electron transfer (PIET) and photochromic behaviors. Interestingly, the photochromic performance of 2 can be enhanced after the removal of coordinated DMF, which might be ascribed to the decrease of the distance of EDs/EAs caused by lattice shrinkage, which further improves the efficiency of PIET. Meanwhile, 2 displays rapid electrochromic behavior with an obvious reversible color change from colorless to green, which can be used in an electrochromic device. This work develops a new type of EA for the construction of stimuli-responsive functional materials with excellent dual photo-/electrochromic properties.

The effect of conjugation degree of aromatic carboxylic acids on electronic and photo-responsive behaviors of naphthalenediimide-based coordination polymers

Three novel naphthalenediimide-based (NDI-based) coordination polymers (CPs), namely [Cd(3-PMNDI)(2,2'-BPDC)] (1), [Cd2(3-PMNDI)1.5(4,4'-BPDC)2(H2O)3]·DMF (2) and [Cd(3-PMNDI)(4,4'-SDC)] (3) (2,2'-H2BPDC = 2,2'-biphenyldicarboxylic acid, 4,4'-H2BPDC = 4,4'-biphenyldicarboxylic acid, 4,4'-H2SDC = 4,4'-stilbenedicarboxylic acid, 3-PMNDI = N,N'-bis(3-pyridylmethyl)-1,4,5,8-naphthalenediimide, and DMF = N,N'-dimethylformamide), have been designed and synthesized here from electron-deficient PMNDI (electron acceptors, EAs) and electron-rich aromatic carboxylic acids (electron donors, EDs) in the presence of cadmium ions. The introduction of aromatic carboxylic acids with different sizes and conjugation degrees leads to the generation of a two-dimensional (2D) layer in 1, a two-fold interpenetrated three-dimensional (3D) network in 2 and an eight-fold interpenetrated 3D framework in 3. Furthermore, the use of distinct electron-donating aromatic carboxylic acids and the consequent different numbers and strengths of lone pair-π and π-π interactions in the interfacial contacts of EDs/EAs give rise to distinct intermolecular charge transfer (ICT) and initial colors of the three CPs, and consequently cause different photoinduced intermolecular electron transfer (PIET) and distinguishing photo-responsive behaviors (weak photochromic performance for 1, excellent photochromic properties for 2 and non-photochromism for 3). This study indicates that an appropriate ICT is beneficial for PIET, but too weak or too strong ICT is not conducive to PIET, which provides an effective strategy for the construction of functional CPs with distinguishing photo-responsive properties through the subtle balance of ICT and PIET.

Thermosalient effect of a naphthalene diimide and tetrachlorocobaltate hybrid and changes of color and magnetic properties by ammonia vapor

An organic-inorganic hybrid metal halide (OIMH), namely the electron-deficient naphthalene diimide (NDI) and [CoCl₄]^2- hybrid (1), showed potential as a sensor for ammonia and amines, in addition to magnetic changes upon vapochromism. Crystal 1 exhibited thermosalient behavior such as leaping and movement, at around 130 °C, which could be explained to be associated with the removal of water molecules from the crystal lattice as shown by TGA and DSC. Compound 1 changed from green to black within 5 minutes when exposed to ammonia vapor, which was attributed to the radical formation in the NDI moiety as evidenced by ESR, and this phenomenon was preserved even when other mono- and di-alkylamines were applied. The exposure of 1 to ammonia resulted in a subsequent color alteration, progressing from black to a gradually dark orange after one day (1_NH3_1 day). This transformation was concomitant with the formation of [Co(NH₃)₆]³⁺ from [CoCl₄]^2-, leading to a modification of the magnetic properties from paramagnetic Co(II) (S = 3/2) to diamagnetic Co(III) (S = 0). Based on these findings, compound 1 represents the first example of an OIMH that exhibits thermosalient behaviour, color change, and magnetic conversion upon exposure to ammonia.

The modulation effect of auxiliary ligands on photochromic properties of 3D naphthalene diimide coordination polymers

Two novel naphthalene diimide (NDI) coordination polymers (CPs), [Cd(NicNDI)(4,4'-SBC)] (1) and [Cd(NicNDI)(2,2'-BPC)] (2) (NicNDI = (3-pyridylacylamino)-1,4,5,8-naphthalene diimide, 4,4'-SBC = 4,4'-stilbene dicarboxylic acid, 2,2'-BPC = 2,2'-biphenyl dicarboxylic acid), were designed and prepared by the combination of electron-deficient NicNDI and electron-rich aromatic carboxylic acid ligands in the presence of cadmium ions. The usage of aromatic carboxylic acid ligands with different conjugation degrees, sizes, shapes and charge densities leads to the generation of distinct interpenetrated three-dimensional (3D) frameworks. Interestingly, photochromism of 1 and weak photoactivity of 2 should be attributed to the introduction of different auxiliary ligands and consequently the formation of distinct interfacial contacts of electron donors (EDs)/electron acceptors (EAs) (d_π-π = 3.427 Å, infinite -ED-EA-ED-EA- for 1vs. d_π-π = 3.634 Å, discrete ED-EA-ED for 2), suggesting a subtle modulating effect of auxiliary ligands on interfacial contacts, photoinduced intermolecular electron transfer (PIET) and photoresponsive behaviors.