SbHPO3F: 2D van der Waals Layered Phosphite Exhibiting Large Birefringence

From Pb6(HPO3)(H2PO3)Cl9 to Pb6(HPO3)2Br8(H2O)·H2O: Halogen Regulation to Achieve Inorganic Metal Phosphite Halide Nonlinear Optical Material with Unprecedented Pb-Centered Polyhedral Units

Nonlinear optical (NLO) crystals are widely used in various fields. The introduction of lone-pair cations is regarded as an effective strategy to explore NLO crystals. In this work, two novel lead phosphite halides, centrosymmetric Pb6(HPO3)(H2PO3)Cl9 and noncentrosymmetric Pb6(HPO3)2Br8(H2O)·H2O, were obtained via a hydrothermal method. Pb6(HPO3)(H2PO3)Cl9 is the first reported lone-pair metal phosphite with two kinds of phosphite groups (HPO32- and H2PO3-) and Pb6(HPO3)2Br8(H2O)·H2O is the first inorganic NLO phosphite halide with a phase-matchable SHG effect of 1.02 × KDP. In addition, the Pb-centered polyhedral units of PbOCl4, PbOCl6, PbO2Cl5, PbO2Br5, PbOBr6, and PbO3(H2O)Br3 in these two structures have never been reported before. An in-depth study on the structure-property relationship of the two compounds with halogen substitution is also performed.

Sb2O2SeO3 and Sb2O(SeO3)2: Two-Layered Antimony(III) Selenites with Enhanced Birefringence

Two antimony selenites, Sb2O2SeO3 and Sb2O(SeO3)2, were synthesized by simultaneously incorporating stereochemically active lone pair electrons containing SeO32- and Sb3+. These compounds are structured with [SbOx] polyhedra and [SeO3] units within a two-dimensional framework. Both of them exhibit cutoffs at 300 and 330 nm within the ultraviolet (UV) range and demonstrate significant birefringence, with indices of 0.069 and 0.126 at 546 nm, respectively. These properties highlight their potential as UV birefringent materials. Structural analyses and theoretical calculations reveal that their exceptional birefringence results from the synergistic interactions between SeO32- anions and Sb3+ cations.

Exceptional Optical Anisotropy Enhancement Achieved Through Dual-Ions Cosubstitution Strategy in Novel Hybrid Bismuth Halides

Guided by a superb dual-ions cosubstitution strategy, two novel, highly optically anisotropic hybrid bismuth halides are designed and synthesized. The first compound, Gu3Bi2NO3Cl8 (Gu = C(NH2)3), is developed using the 2D perovskite halide Cs3Bi2Cl9 as the maternal structure. This involved substituting all Cs+ cations with organic Gu+ and replacing some Cl- anions with [NO3]-. Further substitution of Cl- with additional [NO3]- resulted in the formation of nitrate-rich Gu2Bi(NO3)3Cl2 crystal, exhibiting a 3.4-fold increase in [NO3]- per unit volume. Both compounds have a structurally 0D nature, comprising bismuth-centered polyhedra formed by coordinated chlorides and monodentate/bidentate nitrate moieties, with Gu+ serving as a separator and linker. Notably, the presence of superb optically anisotropic dual-ions, i.e., planar Gu+ and [NO3]-, enables these crystals to possess sharply enhanced optical anisotropy, with birefringence values more than 1 order of magnitude higher than that of the initial crystal Cs3Bi2Cl9 (0.162/0.186vs 0.011 at 546 nm). The discovery and characterization of Gu3Bi2NO3Cl8 and Gu2Bi(NO3)3Cl2 crystals provide new insights into achieving expected modifications in optical properties through the utilization of a dual-ions cosubstitution strategy.

Centric Sc(HPO3)(H2PO3)(H2O) and Acentric Sc(H2PO3)3: Two Ultraviolet Scandium Phosphite Optical Crystals

Exploring ultraviolet (UV) nonlinear-optical (NLO) materials is significant for the conversion of a high-frequency laser. Two scandium phosphites, Sc(HPO3)(H2PO3)(H2O) and Sc(H2PO3)3, were successfully synthesized. Centric Sc(HPO3)(H2PO3)(H2O) exhibits a short UV cutoff edge (<200 nm) and a unique double-layer structure of [Sc2(HPO3)2(H2PO3)2(H2O)2]∞. The acentric Sc(H2PO3)3 exhibits a three-dimensional [Sc(H2PO3)3]∞ structure with a large band gap of 4.05 eV, and it demonstrates a moderately phase-matchable second-harmonic-generation response [0.60 × KDP (KH2PO4)] at 1064 nm. The crystal structures, optical properties, and theoretical calculations of the two compounds are discussed. This work will promote the exploration of new NLO phosphite materials.

New antimony fluorooxoborates with strong birefringence and unprecedented structural characterisation

Fluorooxoborates constitute a rich source of optical crystals due to their structural diversity and excellent performance. Antimony fluorooxoborates with stereochemically active lone pairs of electrons still have not been found, although the first antimony borate was discovered several years ago. In this study, we have achieved the successful synthesis of the first antimony(III) fluorooxoborate with an unprecedented [B2O4F]∞ chain, namely SbB2O4F. Remarkably, SbB2O4F shows strong birefringence (0.171@1064 nm) and short UV cutoff edges (about 220 nm) according to calculations. The birefringence of SbB2O4F mainly originates from the highly distorted [SbO4] groups.

Two Short-Wave UV Antimony(III) Sulfates Exhibiting Large Birefringence

In the present work, we have successfully obtained two new UV antimony-based sulfates, NH4Sb(SO4)2 and Ca2Sb2O(SO4)4, by a conventional hydrothermal method. Interestingly, both compounds share similar structural building blocks, such as SbO4 seesaws and SO4 tetrahedra, yet they endow discrepant birefringence values measured at 546 nm with values of 0.150 and 0.114, respectively, owing to the different distortions of the SbO4 groups with SCALP electrons. Moreover, both compounds display large band gaps (4.32 and 4.43 eV, respectively), so they can be used as short-wavelength UV birefringent materials. Moreover, NH4Sb(SO4)2 is a noncentrosymmetric compound, showing a frequency doubling effect of 0.2 × KDP. Detailed structural analyses and calculations confirm the source of superior optical performance and the reasons for the different birefringence of the two compounds. This work provides ideas for the following discovery of antimony-based optical materials with excellent properties.

Two van der Waals Layered Antimony(III) Phosphites as UV Optical Materials

Herein, two new Sb3+-based phosphites, Sb2O2(HPO3) (I) and Sb2O(HPO3)2 (II), were successfully obtained by ingeniously combining Sb3+-based polyhedra containing stereochemically active lone pair (SCALP) and HPO3 polar groups. Both reported compounds exhibit unique 2D van der Waals layered structures, [Sb4O4(HPO3)2]∞ and [Sb2O(HPO3)2]∞, respectively, which favors compounds with large optical anisotropy. Interestingly, the different curvatures of the two layers resulted in the two title compounds showing significantly different birefringences (0.079@546 and 0.046@546 nm, respectively). Both compounds endow wide optical band gaps (4.32 and 4.54 eV, respectively), which indicates their potential as promising ultraviolet (UV) birefringent crystals. The synthesis of the two title compounds enriched Sb3+-based phosphites in the UV region and provided guidance for the subsequent synthesis of superior optical materials.

Highly Birefringent d0 Transition Metal Fluoroantimonite in the Mid Infrared Band: Order-Disorder Regulation by Cationic Size

An unusual O/F ordered d0 transition metal fluoroantimonite, namely, K2SbMoO2F7, has been created by the cationic size effect of alkali metals. It features the largest birefringence of 0.220@550 nm among inorganic antimonites with a halogen element, which is an order of magnitude larger than the disordered A2SbMoO2F7 (A = Rb, Cs). These three new compounds exhibit two different structures, although all of the structures were made of [SbMoO2F7]2- chains formed by SbF5 square pyramids and MoO2F4 octahedrons. A transparent single crystal of K2SbMoO2F7 with dimensions of 7.0 × 5.0 × 1.0 mm3 has been successfully grown by the aqueous solution volatilization method. The UV-vis-MIR transmission spectrum showed that K2SbMoO2F7 can display excellent transmittance in the range of 0.5-5.0 μm and 6.0-9.8 μm, indicating its application potential as a birefringent material in the mid infrared band. This work offers a fresh approach to the design and synthesis of mid infrared birefringent materials.

Pb2Cl2(HPO3)(H2O) and Pb3Br2(HPO3)2: Two Phosphite Halides with 3D Structural Networks and Enlarged Birefringence

Compounds constructed by mixed anions are widely favorable for their diverse crystal structures and physical performances. Here, two lead phosphite halides, Pb₂Cl₂(HPO₃)(H₂O) (1) and Pb₃Br₂(HPO₃)₂ (2), were obtained by facile hydrothermal reactions. Both compounds crystallize in the space group Pnma. 1 exhibits a 3D structure composed of HPO₃ units, PbCl₄O₃ pentagonal bipyramids, and PbO₃ pyramids. 2 also shows a 3D framework built by HPO₃ units, PbO₂Br₄ octahedron, PbO₅ and PbO₃Br₂ square pyramids. By introducing halogen anions to the lead phosphite system, 1 and 2 show enhanced birefringences of 0.083 and 0.072 at 1064 nm, respectively, compared with 0.023@1064 nm for Pb₂(HPO₃)₂. In this work, syntheses, crystal structures, optical properties, and theoretical calculation results have been studied in detail.