Low-Pt Octahedral PtCuCo Nanoalloys: "One Stone, Four Birds" for Oxygen Reduction and Methanol Oxidation Reactions

Synergistic Effect of Electrocatalyst for Enhanced Oxygen Reduction Reaction: Low Pt-Loaded CuPt Alloy Nanoparticles Supported on N-Doped Hierarchical Porous Carbon

It is challenging to synthesize oxygen reduction reaction (ORR) electrocatalysts that are highly efficient, affordable, and stable for use in proton exchange membrane fuel cells. To address this challenge, we developed a low platinum-loading (only 6.68% wt) ORR catalyst (PtCu1-NC), comprising CuPt nanoparticles (average size: 1.51 nm) supported on the N-doped carbon substrates. PtCu1-NC possesses a high specific surface area of 662 m2 g-1 and a hierarchical porous structure, facilitating efficient mass transfer. The synergistic effect from introduced copper and the electron effect from nitrogen modify the electronic structure of platinum, effectively accelerating the ORR reaction and enhancing stability. Density functional theory calculations demonstrate the catalytic mechanism and further verify the synergistic effect. Electrochemical assessments indicate that PtCu1-NC exhibits specific activity and mass activity 5.3 and 5.6 times higher, respectively, than commercial Pt/C. The half-wave potential is 27 mV more positive than that of commercial Pt/C. The electrochemical active surface area value is 104.3 m2 g-1, surpassing that of Pt/C. Approximately 78% of current is retained after 10,000 s chronoamperometry measurement. These results highlight the effectiveness of alloying in improving the catalyst performance.

Electronic Structure Effect of PtCo Alloy with Adjustable Compositions for Efficient Methanol Electrooxidation

Various efficient strategies have been developed to overcome the anodic electrocatalyst issue of methanol-based fuel cells owing to their complicated methanol electrooxidation mechanism. In this work, PtCo nanoparticles with adjustable compositions supported on multiwalled carbon nanotubes (Pt1Cox/MWCNTs) through the adsorbing-coating-annealing-etching route were synthesized. Compared with the Pt/C catalyst, Pt1Co3/MWCNTs exhibit better electrocatalytic MOR activity in both activity and durability. Notably, the electrochemical mass and specific activity of the as-prepared catalyst are 1.04 mA μg-1Pt and 2.18 mA cm-2, respectively, which are higher than those of the Pt/C catalyst. Moreover, the as-prepared sample revealed lower onset potential during the CO stripping test. Furthermore, the Pt1Co3/MWCNTs possess a lower current density decrease rate in chronoamperometry and cyclic durability tests. The enhancement of activity and stability of Pt1Co3/MWCNTs could be ascribed to their ordered morphological structure, the electronic interaction between MWCNTs and PtCo nanoparticles, and the suitable electronic structure effect between Pt/Co ratios. The concept of the catalyst design in this study offers a different guideline for constructing the novel methanol electrooxidation catalyst, which will accelerate the widespread fuel cell practical application.

Defect-Engineered Charge Transfer in a PtCu/PrxCe1-xO2 Carbon-Free Catalyst for Promoting the Methanol Oxidation and Oxygen Reduction Reactions

Platinum (Pt) and Pt-based alloys have been extensively studied as efficient catalysts for both the anode and cathode of direct methanol fuel cells (DMFC). Defect engineering has been revealed to be practicable in tuning the charge transfer between Pt and transition metals/supports, which leads to the charge density rearrangement and facilitates the electrocatalytic performance. Herein, Pr-doped CeO2 nanocubes were used as the noncarbon support of a PtCu catalyst. The concentration and structure of oxygen vacancy (Vo) defects were engineered by Pr doping. Besides the Vo monomer, the oxygen vacancy with a linear structure is also observed, leading to the one-dimensional PtCu. The Vo concentration shows the volcanic scenario as Pr increased. Accordingly, the activities of PtCu/PrxCe1-xO2 toward methanol oxidation and oxygen reduction reactions exhibit the volcanic scenario. PtCu/Pr0.15Ce0.85O2 exhibits the optimal catalytic performance with the specific activity 3.57 times higher than that of Pt/C toward MOR and 1.34 times higher toward ORR. The MOR and ORR mass activities of PtCu/Pr0.15Ce0.85O2 reached 1.05 and 0.12 A·mg-1, which are 3.09 and 0.92 times the values of Pt/C, respectively. The abundant Vo afforded surplus electrons, which tailored the electron transfer between PtCu and PrxCe1-xO2, leading to enhanced catalytic performance of PtCu/PrxCe1-xO2. DFT calculations on PtCu/Pr0.15Ce0.85O2 revealed that Pr doping reduced the band gap of CeO2 and lowered the overpotential.

Abundant Exterior/Interior Active Sites Enable Three-Dimensional PdPtBiTe Dumbbells C-C Cleavage Electrocatalysts for Actual Alcohol Fuel Cells

Developing high-activity electrocatalysts is of great significance for the commercialization of direct alcohol fuel cells (DAFCs), but it still faces challenges. Herein, three-dimensional (3D) porous PdPtBiTe dumbbells (DBs) were successfully fabricated via the visible photoassisted method. The alloying effect, defect-rich surface/interface and nanoscale cavity, and open pores make the 3D PdPtBiTe DBs a comprehensive and remarkable electrocatalyst for the C1-C3 alcohol (ethanol, ethylene glycol, glycerol, and methanol) oxidation reaction (EOR, EGOR, GOR, and MOR, respectively) in an alkaline electrolyte, and the results of in situ Fourier transform infrared spectra revealed a superior C-C bond cleavage ability. The 3D PdPtBiTe DBs exhibit ultrahigh EOR, EGOR, GOR, and MOR mass activities of 25.4, 23.2, 16.8, and 18.3 A mgPd + Pt-1, respectively, considerably surpassing those of the commercial Pt/C and Pd/C. Moreover, the mass peak power densities of 3D PdPtBiTe DBs in actual ethanol, ethylene glycol, glycerol, or methanol fuel cells increase to 409.5, 501.5, 558.0, or 601.3 mW mgPd + Pt-1 in O2, respectively. This study provides a new class of multimetallic nanomaterials as state-of-the-art multifunctional anode electrocatalysts for actual DAFCs.