Vibronic Coupling Investigation to Compute Phosphorescence Spectra of Pt(II) Complexes

The design and synthesis of green emissive iridium(III) complexes guided by calculations of the vibrationally-resolved emission spectra

A key challenge in developing emissive materials for organic light-emitting diodes is to optimize their colour saturation, which means targeting narrowband emitters. In this combined theoretical and experimental study, we investigate the use of heavy atoms in the form of trimethylsilyl groups as a tool to reduce the intensity of the vibrations in the 2-phenylpyridinato ligands of emissive iridium(III) complexes that contribute to the vibrationally coupled modes that broaden the emission profile. An underutilised computational technique, Frank-Condon vibrationally coupled electronic spectral modelling, was used to identify the key vibrational modes that contribute to the broadening of the emission spectra in known benchmark green-emitting iridium(III) complexes. Based on these results, a family of eight new green-emitting iridium complexes containing trimethylsilyl groups substituted at different positions of the cyclometalating ligands has been prepared to explore the impact that these substituents have on reducing the intensity of the vibrations and the resulting reduction in the contribution of vibrationally coupled emission modes to the shape of the emission spectra. We have demonstrated that locating a trimethylsilyl group at the N4 or N5 position of the 2-phenylpyridine ligand damps the vibrational modes of the iridium complex and provides a modest narrowing of the emission spectrum of 8-9 nm (or 350 cm^-1). The strong correlation between experimental and calculated emission spectra highlights the utility of this computational method to understand how the vibrational modes contribute to the profile of the emission spectra in phosphorescent iridium(III) emitters.

DFT vs. TDDFT vs. TDA to simulate phosphorescence spectra of Pt- and Ir-based complexes

A quantum investigation of the optical (mainly luminescence) properties of twelve transition metal complexes using DFT, TDDFT and TDA computations is presented. Unrestricted DFT and TDA outperform TDDFT for the investigated complexes especially when an Ir centre is present.

Luminescence properties of [Ir(C^N)2(N^N)]+ complexes: relations between DFT computation results and emission band-shape analysis data

Luminescence properties of two series of [Ir(C^N)₂(N^N)]⁺ complexes bearing deprotonated 1-phenyl-1H-pyrazole or 1-(2,4-difluorophenyl)-1H-pyrazole as cyclometalating C^N ligands and different α-diimines (2,2′-bipyridine, 1,10-phenanthroline and their derivatives) as ancillary N^N ligands have been studied in acetonitrile solutions at room temperature and in 77 K methanol/ethanol (1 : 1) matrices. Ligand and temperature induced changes in the nature of the emissive ³*[Ir(C^N)₂(N^N)]⁺ species result in well-pronounced changes in their emission properties like emission wavelength, emission quantum yields and emission lifetimes. Depending on the nature of the coordinated C^N and N^N ligands and/or the measurement temperature, the investigated luminophores exhibit emissions arising from the intraligand transitions localized within the N^N ligand or from the metal-to-ligand charge-transfer transitions involving the Ir(C^N)₂⁺ and N^N moieties as confirmed by means of the DFT computations. The computed DFT energies of the excited ³*[Ir(C^N)₂(N^N)]⁺ states and outer/inner reorganization energies associated with the S₀ ← ³*[Ir(C^N)₂(N^N)]⁺ transitions remain in nice agreement with those available from the performed emission band-shape analyses. The observed agreement implies ordinary DFT computations at the B3LYP/LANL2DZ/6-31G(d,p) level of theory, even performed neglecting the spin–orbit phenomena, as enough accurate in the quantitative prediction of the most important parameters characterizing the investigated [Ir(C^N)₂(N^N)]⁺ luminophores.

For two series of [Ir(C^N)₂(N^N)]⁺ luminophores, the computed DFT quantities remain in nice agreement with those available from the emission band-shape analyses.

Unravelling the Origin of the Yellow-Orange Luminescence in Natural and Synthetic Scapolites

After decades of speculation without material proof, the yellow-orange luminescence of scapolite is definitely assigned to (S₂)^- activators trapped in [Na₄] square cages. Synthetic sulfur-doped scapolites confirm the implication of sulfur species in luminescence. Formally, the emission and excitation spectra of various polysulfide species were calculated. The excellent match between theory and experiments for (S₂)^- dimers provides definitive proof that it is the cause of the yellow-orange luminescence in scapolite.

A Mountaineering Strategy to Excited States: Highly Accurate Energies and Benchmarks for Medium Sized Molecules

Following our previous work focusing on compounds containing up to 3 non-hydrogen atoms [J. Chem. Theory Comput. 2018, 14, 4360-4379], we present here highly accurate vertical transition energies obtained for 27 molecules encompassing 4, 5, and 6 non-hydrogen atoms: acetone, acrolein, benzene, butadiene, cyanoacetylene, cyanoformaldehyde, cyanogen, cyclopentadiene, cyclopropenone, cyclopropenethione, diacetylene, furan, glyoxal, imidazole, isobutene, methylenecyclopropene, propynal, pyrazine, pyridazine, pyridine, pyrimidine, pyrrole, tetrazine, thioacetone, thiophene, thiopropynal, and triazine. To obtain these energies, we use equation-of-motion/linear-response coupled cluster theory up to the highest technically possible excitation order for these systems (CC3, EOM-CCSDT, and EOM-CCSDTQ) and selected configuration interaction (SCI) calculations (with tens of millions of determinants in the reference space), as well as the multiconfigurational n-electron valence state perturbation theory (NEVPT2) method. All these approaches are applied in combination with diffuse-containing atomic basis sets. For all transitions, we report at least CC3/aug-cc-pVQZ vertical excitation energies as well as CC3/aug-cc-pVTZ oscillator strengths for each dipole-allowed transition. We show that CC3 almost systematically delivers transition energies in agreement with higher-level methods with a typical deviation of ±0.04 eV, except for transitions with a dominant double excitation character where the error is much larger. The present contribution gathers a large, diverse, and accurate set of more than 200 highly accurate transition energies for states of various natures (valence, Rydberg, singlet, triplet, n → π*, π → π*, ...). We use this series of theoretical best estimates to benchmark a series of popular methods for excited state calculations: CIS(D), ADC(2), CC2, STEOM-CCSD, EOM-CCSD, CCSDR(3), CCSDT-3, CC3, and NEVPT2. The results of these benchmarks are compared to the available literature data.

Tuning the Optical Properties of Novel Antitumoral Drugs Based on Cyclometalated Iridium(III) Complexes

Most of the current efforts in drug discovery are devoted to the design of molecules able to mitigate side effects by concentrating the biological action in the targeted tissue. One promising strategy is photodynamic therapy, which is based on the in situ generation of reactive singlet oxygen upon radiation exposure. However, such an approach requires the use of an efficient photosensitizer. This contribution deals with the optical properties of an Ir(III) complex, [Ir(pbz)₂(N^N)] (pbz = 2-phenylbenzimidazole; N^N = methyl 1-butyl-2-pyridyl-benzimidazole-5-carboxylate), which has recently been shown to exhort a strong photoactivity, but still needs further improvements to reach clinical applications. We performed density functional theory calculations at the M06, PBE0, ωB97xD, and CAM-B3LYP levels to predict the impact of introducing electron donor-acceptor groups into the nature of the lowest excited states. The simulations performed demonstrate that the presence of a NH₂ at the pbz ligand and a NO₂ group at the N^N ligand yield a bathochromic shift of absorption spectrum. We report the most sensitive positions to tune the optical signatures of this family of complexes.

First principles investigation of the spectral properties of neutral, zwitterionic, and bis-cationic azaacenes

An in-depth investigation of the optical properties of recently-synthesized linear azaacene derivatives of various electronic nature (neutral, dicationic, and zwitterionic) is presented.

Accurate computations to simulate the phosphorescence spectra of large transition complexes: simulated colors match experiment

Herein, an ab initio investigation on the luminescence properties of three iridium(iii) complexes is reported.

Implementing Metal-to-Ligand Charge Transfer in Organic Semiconductor for Improved Visible-Near-Infrared Photocatalysis

The coordination of organic semiconductors with metal cations can induce metal-to-ligand charge transfer, which broadens light absorption to cover the visible-near-infrared (vis-NIR) spectrum. As a proof-of-concept demonstration, the g-C3 N4 -based complex exhibits dramatically enhanced photocatalytic H2 production with excellent durability under vis-NIR irradiation.

New insights into the vibrational and optical signatures of trans-stilbene via integrated experimental and quantum mechanical approaches

The structure, spectroscopic parameters and optical properties of stilbene have been investigated by a computational protocol including suitable treatment of anharmonic contributions together with new experimental results.

Virtual eyes for technology and cultural heritage: toward computational strategy for new and old indigo-based dyes

A cost-effective, robust, and reliable computational strategy is applied to simulate peak positions and band-shapes of UV-vis spectra together with the dye colours perceived by human eyes. The features of our virtual multifrequency spectrometer (VMS) relevant to this topic are sketched with special focus on the selection of density functional, vibronic model, and solvent description. Furthermore, the new VMS-Draw graphical user interface (GUI) is employed for user-friendly pre- and post-processing of the computed data. The family of indigo dyes is used as case study in view of their continued use in the field of cultural heritage, together with new promising applications for photonics and sustainable energy. After assessment of different simplified models employed in previous studies, the role of several substituents and of dimerization in tuning the colour and spectral features are analyzed in detail by means of both accurate computations and interpretative models. The results are in remarkable agreement with experiment and allow to rationalize the behaviour of this class of dyes.

0-0 Energies Using Hybrid Schemes: Benchmarks of TD-DFT, CIS(D), ADC(2), CC2, and BSE/GW formalisms for 80 Real-Life Compounds

The 0-0 energies of 80 medium and large molecules have been computed with a large panel of theoretical formalisms. We have used an approach computationally tractable for large molecules, that is, the structural and vibrational parameters are obtained with TD-DFT, the solvent effects are accounted for with the PCM model, whereas the total and transition energies have been determined with TD-DFT and with five wave function approaches accounting for contributions from double excitations, namely, CIS(D), ADC(2), CC2, SCS-CC2, and SOS-CC2, as well as Green's function based BSE/GW approach. Atomic basis sets including diffuse functions have been systematically applied, and several variations of the PCM have been evaluated. Using solvent corrections obtained with corrected linear-response approach, we found that three schemes, namely, ADC(2), CC2, and BSE/GW allow one to reach a mean absolute deviation smaller than 0.15 eV compared to the measurements, the two former yielding slightly better correlation with experiments than the latter. CIS(D), SCS-CC2, and SOS-CC2 provide significantly larger deviations, though the latter approach delivers highly consistent transition energies. In addition, we show that (i) ADC(2) and CC2 values are extremely close to each other but for systems absorbing at low energies; (ii) the linear-response PCM scheme tends to overestimate solvation effects; and that (iii) the average impact of nonequilibrium correction on 0-0 energies is negligible.