Design of Pore Size and Functionality in Pillar-Layered Zn-Triazolate-Dicarboxylate Frameworks and Their High CO2/CH4 and C2 Hydrocarbons/CH4 Selectivity

Extra-High CO2 Adsorption and Controllable C2H2/CO2 Separation Regulated by the Interlayer Stacking in Pillar-Layered Metal-Organic Frameworks

Pillar-layered metal-organic frameworks (PLMOFs) are promising gas adsorbents due to their high designability. In this work, high CO2 storage capacity as well as controllable C2H2/CO2 separation ability are acquired by rationally manipulating the interlayer stacking in pillar-layered MOF materials. The rational construction of pillar-layered MOFs started from the 2D Ni-BTC-pyridine layer, an isomorphic structure of pioneering MOF-1 reported in 1995. The replacement of terminal pyridine groups by bridging pyrazine linkers under optimized solvothermal conditions led to three 3D PLMOFs with different stacking types between adjacent Ni-BTC layers, named PLMOF 1 (ABAB stacking), PLMOF 2 (AABB stacking), and PLMOF 3 (AAAA stacking). Regulated by the layer arrangements, CO2 and C2H2 adsorption capacities (273 K and 1 bar) of PLMOFs 1-3 vary from 173.0/153.3, 185.0/162.4, to 203.5/159.5 cm3 g-1, respectively, which surpass the values of most MOF adsorbents. Dynamic breakthrough experiments further indicate that PLMOFs 1-3 have controllable C2H2/CO2 separation performance, which can successfully overcome the C2H2/CO2 separation challenge. Specially, PLMOFs 1-3 can remove trace CO2 (3%) from the C2H2/CO2 mixture and produce high-purity ethylene (99.9%) in one step with the C2H2 productivities of 1.68, 2.45, and 3.30 mmol g-1, respectively. GCMC simulations indicate that the superior CO2 adsorption and unique C2H2/CO2 separation performance are mainly ascribed to different degrees of CO2 agglomeration in the ultramicropores of these PLMOFs.

Novel UiO-NH2-like Zr-Based MOF (Basu-DPU) as an Excellent Catalyst for Preparation of New 6H-Chromeno[4,3-b]quinolin-6-ones

A new two-fold interpenetrated pillar-layered metal-organic framework (MOF) was designed and synthesized based on zirconium cations, an amine-functionalized ligand, and a linear exo-bidentate bis-pyridine ligand. The structure of the prepared framework was evaluated using various techniques, such as Fourier transform infrared (FTIR), ¹³C NMR, energy-dispersive X-ray (EDX), elemental mapping analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis/differential thermal analysis (TGA/DTA), and Brunauer-Emmett-Teller (BET). Then, catalytic application of the prepared zirconium-based MOF was successfully explored in the synthesis of novel 6H-chromeno[4,3-b]quinolin-6-ones 4(a-l) through a one-pot three-component condensation reaction of 4-hydroxycumarine, 1-naphthylamine, and aromatic aldehydes under solvent-free conditions at 110 °C. The pure products were obtained with high atom efficiency (AE) and short reaction times and characterized by FTIR, NMR, and mass spectrometry techniques.

Rational regulation of acetylene adsorption and separation for ultra-microporous copper-1,2,4-triazolate frameworks by halogen hydrogen bonds

It is well known that the introduction of exposed fluorine (F) sites into metal-organic frameworks (MOFs) can effectively promote acetylene (C₂H₂) adsorption via C-H⋯F hydrogen bonds. However, such super strong hydrogen bonding interactions usually lead to very high acetylene adsorption enthalpy and thus require more energy during the adsorbent regeneration process. As the same group elements, chlorine (Cl), bromine (Br) and iodine (I) also can act as hydrogen bond acceptors but with relatively weak forces. So, it is speculated that the decoration of Cl, Br or I sites on the pore surface of MOF adsorbents may enhance acetylene adsorption but with lower energy consumption. Herein, ultra-microporous MOFs constructed by Cu₄X₄ (X = Cl, Br, I) motifs and 1,2,4-triazolate linkers, namely, [Cu₈X₄(TRZ)₄]_n (TRZ = 3,5-diethyl-1,2,4-triazole or detrz for SNNU-313-X, and 3,5-dipropyl-1,2,4-triazole or dptrz for SNNU-314-X), provide an ideal platform to investigate the effect of C-H⋯X (X = Cl, Br, I) hydrogen bonding on C₂H₂ adsorption and purification performance. Benefiting from the small pore size and pore environment, the C₂H₂ uptake and separation properties of this series of MOFs are systematically regulated. Detailed gas adsorption results show that with the same organic linker, the C₂H₂ uptake and separation (C₂H₂/C₂H₄ and C₂H₂/CO₂) performance decrease clearly with the electronegativity of halogen ions (SNNU-313-Cl > SNNU-313-Br > SNNU-313-I). With the same halogen ion, the gas adsorption decreases with the bulk of decorated alkyl groups (SNNU-313-Cl > SNNU-314-Cl). Remarkably, SNNU-313/314 series MOF adsorbents exhibit moderate C₂H₂ uptake capacity and high separation ability, but the C₂H₂ adsorption enthalpies are much lower than those of MOF materials with exposed F sites. Dynamic fixed-bed column breakthrough experiments and Grand Canonical Monte Carlo (GCMC) simulations further indicate the critical effects of halogen hydrogen bonds on acetylene adsorption and separation. Overall, this work demonstrated an effective regulation of acetylene adsorption and separation by rational C-H⋯X hydrogen bonding, which may provide a new route for the exploration of energy-efficient acetylene adsorbent materials.

Multi-responsive luminescent sensitivities of two pillared-layer frameworks towards nitroaromatics, Cr2O72-, MnO4- and PO43- anions

Combining Zn(II) with two dicarboxylic acids of different length and functional groups results in the 2D metal-carboxylate layer of different size and shape, which are further connected by the same bis-pyridyl-bis-amide pillar to afford two 4-fold and 3-fold interpenetrating pillared-layer networks (1 and 2). Luminescent properties of 1 and 2 have been systematically investigated and demonstrated multi-responsive luminescent sensitivities. 1 can be used for highly sensitive detection of nitroaromatics. In particular, 2 can be used turn-off sensing towards Cr₂O₇^2- and MnO₄^- anions as well as turn-on sensing towards PO₄^3- anion in aqueous solution with high sensitivity and remarkable recyclability. The sensing mechanism is also discussed.

A novel 3D terbium metal-organic framework as a heterogeneous Lewis acid catalyst for the cyanosilylation of aldehyde

A novel 3D lanthanide(iii) metal-organic framework (MOF) (namely Tb-MOF), was synthesized by self-assembly from Tb(iii) ion nitrate and the rigid organic ligand H₂sbdc (H₂sbdc = 5,5-dioxo-5H-dibenzo[b,d]thiophene-3,7-dicarboxylic acid), and could work as an efficient heterogeneous catalyst for the cyanosilylation of aromatic aldehydes at room temperature. The obtained Tb-MOF has been characterized and analysed in detail by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis and so on. The pores of Tb-MOF provided a microenvironment that was beneficial for the substrates to be close to the Lewis acid catalytic sites. The IR spectrogram and the fluorescence titration proved that the substrates could be activated inside the channel of Tb-MOF. The heterogeneous Tb-MOF catalyst with fine catalytic efficiency exhibited a high TON (TON = 460), and could be recycled at least three times without significantly reducing its activity.

Insights into Paraben Adsorption by Metal-Organic Frameworks for Analytical Applications

Metal-organic frameworks (MOFs) are attractive materials used as sorbents in analytical microextraction applications for contaminants of emerging concern (CECs) from environmental liquid matrices. The demanding specs for a sorbent in the analytical application can be comprehensively studied by considering the interactions of the target analytes with the frameworks by the use of single-crystal X-ray diffraction, computational analysis, and adsorption studies, including the kinetic ones. The current study intends a better understanding of the interactions of target CECs (particularly, propylparaben (PPB) as a model) and three Zn-based layered pillared MOFs: CIM-81 [Zn₂(tz)₂(bdc)] (Htz = 1,2,4-triazole and H₂bdc = 1,4-benzenedicarboxylic acid) and their amino derivatives [Zn₂(NH₂-tz)₂(bdc)] CIM-82 and [Zn₂(tz)₂(NH₂-bdc)] CIM-83 (NH₂-Htz = 3-amino-1,2,4-triazole and NH₂-H₂bdc = 2-amino-1,4-benzenedicarboxylic acid). The crystal structures of the two solvate compounds (dma@CIM-81 (dma = dimethylacetamide) and acetone@CIM-81) were solved by single-crystal X-ray diffraction to determine the points of interaction between the framework and the guest molecules. They also served as a starting point for the computational modeling of the PPB@CIM-81 compound, showing that up to two PPB molecules can be hosted in one of the pores, while only one can be trapped in the second pore type, leading to a maximum theoretical capacity of 291.9 mg g^-1. This value is close to the value obtained by the adsorption isotherm experiment for CIM-81 (283 mg g^-1). This value is, by far, higher than those previously reported for other materials for the removal of PPB from water, and also higher than the experimental values obtained for CIM-82 (54 mg g^-1) and CIM-83 (153 mg g^-1). The kinetics of adsorption is not very fast, with uptake of about 40% in 3 h, although a 70% release in methanol is achieved in 1 h. In addition, a further comparison of performance in analytical microextraction (requiring only 10 mg of CIM-81) was carried out together with chromatographic analysis to support all insights attained, with the method being able to monitor CECs as low as μg L^-1 levels in complex environmental water samples, thus performing successfully for water monitoring even in multicomponent scenarios.

Tuning the Pore Surface of an Ultramicroporous Framework for Enhanced Methane and Acetylene Purification Performance

Both methane (CH₄) and acetylene (C₂H₂) are important energy source and raw chemicals in many industrial processes. The development of an energy-efficient and environmentally friendly separation and purification strategy for CH₄ and C₂H₂ is necessary. Ultramicroporous metal-organic framework (MOF) materials have shown great success in the separation and purification of small-molecule gases. Herein, the synergy effect of tritopic polytetrazolate and ditopic terephthalate ligands successfully generates a series of isoreticular ultramicroporous cadmium tetrazolate-carboxylate MOF materials (SNNU-13-16) with excellent CH₄ and C₂H₂ purification performance. Except for the uncoordinated tetrazolate N atoms serving as Lewis base sites, the pore size and pore surface of MOFs are systematically engineered by regulating dicarboxylic acid ligands varying from OH-BDC (SNNU-13) to Br-BDC (SNNU-14) to NH₂-BDC (SNNU-15) to 1,4-NDC (SNNU-16). Benefiting from the ultramicroporous character (3.8-5.9 Å), rich Lewis base N sites, and tunable pore environments, all of these ultramicroporous MOFs exhibit a prominent separation capacity for carbon dioxide (CO₂) or C2 hydrocarbons from CH₄ and C₂H₂. Remarkably, SNNU-16 built by 1,4-NDC shows the highest ideal adsorbed solution theory CO₂/CH₄, ethylene (C₂H₄)/CH₄, and C₂H₂/CH₄ separation selectivity values, which are higher than those of most famous MOFs with or without open metal sites. Dynamic breakthrough experiments show that SNNU-16 can also efficiently separate the C₂H₂/CO₂ mixtures with a gas flow rate of 4 mL min^-1 under 1 bar and 298 K. The breakthrough time (18 min g^-1) surpasses most best-gas-separation MOFs and nearly all other metal azolate-carboxylate MOF materials under the same conditions. The above prominently CH₄ and C₂H₂ purification abilities of SNNU-13-16 materials were further confirmed by the Grand Canonical Monte Carlo (GCMC) simulations.

Pillar-Layered Metal-Organic Frameworks Based on a Hexaprismane [Co6(μ3-OH)6] Cluster: Structural Modulation and Catalytic Performance in Aerobic Oxidation Reaction

Embedding a functional metal-oxo cluster within the matrix of metal-organic frameworks (MOFs) is a feasible approach for the development of advanced porous materials. Herein, three isoreticular pillar-layered MOFs (Co₆-MOF-1-3) based on a unique [Co₆(μ₃-OH)₆] cluster were designed, synthesized, and structurally characterized. For these Co₆-MOFs, tuning of the framework backbone was facilitated due to the existence of second ligands, which results in adjustable apertures (8.8 to 13.4 Å) and high Brunauer-Emmett-Teller surfaces (1896-2401 m² g^-1). As the [Co₆(μ₃-OH)₆] cluster has variable valences, these MOFs were then utilized as heterogeneous catalysts for the selective oxidation of styrene and benzyl alcohol, showing high conversion (>90%) and good selectivity. The selectivity of styrene to styrene oxide surpassed 80% and that of benzyl alcohol to benzaldehyde was up to 98%. The calculated TOF values show that the increase of reaction rate is positively correlated with the enlargement of pore sizes in these MOFs. Further, a stability test and cycling experiment proved that these Co₆-MOFs have well-observed stability and recyclability.

Insight into the Construction of (3,6)-Connected rtl, ant, and Chiral anh Nets Based on Structural Investigation of Several MOFs via Steric Tuning of Linkers

Six cobalt-organic frameworks (1-6) were solvothermally constructed with a tritopic pyridine-carboxylate linker (L-H) and its methyl- and methoxy-functionalized derivatives (L-OCH₃ and L-CH₃). Due to incorporated multiple substituents with various steric hindrances, the tritopic linkers adopt different molecular configurations, Y-shaped and T-shaped, which further combine octahedral or trigonal-prismatic inorganic nodes to afford diverse (3,6)-connected nets. Consequently, 1 and 2 are rtl nets and 3 and 4 are ant nets. Notably, 5 and 6 present rarely observed chiral anh (flu-3) networks with left-handed double helical chains. The structural investigation indicates that the steric tuning of linkers may essentially dictate the resulting diverse MOF structures. Furthermore, the MOFs presented here can be regarded as an ideal structural platform for a better understanding of the assembly of (3,6)-connected rtl, ant, and chiral anh nets, which are closely related to the shape and geometric configuration/conformation of tridentate organic nodes as well as inorganic building nodes.

A multifunctional Cd(ii)-based metal–organic framework with amide groups exhibiting luminescence sensing towards multiple substances

By incorporating flexible amide group onto skeleton of a tetracarboxylate linker endows it with potential to serve as tetrahedral node and facilitate the construction of a flu net, which significantly demonstrates multi-responsive behavior.

Highly Selective CO2 Capture on Waste Polyurethane Foam-Based Activated Carbon

Low-cost activated carbons were prepared from waste polyurethane foam by physical activation with CO2 for the first time and chemical activation with Ca(OH)2, NaOH, or KOH. The activation conditions were optimized to produce microporous carbons with high CO2 adsorption capacity and CO2/N2 selectivity. The sample prepared by physical activation showed CO2/N2 selectivity of up to 24, much higher than that of chemical activation. This is mainly due to the narrower microporosity and the rich N content produced during the physical activation process. However, physical activation samples showed inferior textural properties compared to chemical activation samples and led to a lower CO2 uptake of 3.37 mmol·g−1 at 273 K. Porous carbons obtained by chemical activation showed a high CO2 uptake of 5.85 mmol·g−1 at 273 K, comparable to the optimum activated carbon materials prepared from other wastes. This is mainly attributed to large volumes of ultra-micropores (<1 nm) up to 0.212 cm3·g−1 and a high surface area of 1360 m2·g−1. Furthermore, in consideration of the presence of fewer contaminants, lower weight losses of physical activation samples, and the excellent recyclability of both physical- and chemical-activated samples, the waste polyurethane foam-based carbon materials exhibited potential application prospects in CO2 capture.

Engineering the Pore Size of Pillared-Layer Coordination Polymers Enables Highly Efficient Adsorption Separation of Acetylene from Ethylene

The pore size of adsorbents plays a vital role in determining the overall separation performance of gas separation and purification by adsorption. In this work, the pore apertures of the coordination pillared layer (CPL) was systematically controlled by adjusting the length of pillared ligands. We used pyrazine, 4,4'-bipyridine, and 1,2-di(4-pyridyl)-ethylene with increased length to synthesize CPL-1 (L = pyrazine), CPL-2 (L = 4,4'-bipyridine), and CPL-5 [L = 1,2-di(4-pyridyl)-ethylene], respectively. The aperture size of these CPLs varies from 4 to 11 Å: CPL-1 (4 × 6 Ų), CPL-2 (9 × 6 Ų), and CPL-5 (11 × 6 Ų). Among the three frameworks, CPL-2 exhibits the highest C₂H₂ uptake at ambient conditions as it has moderate pore size and porosity. However, CPL-1 has the best separation performance in the breakthrough experiments with binary gas mixture of C₂H₂/C₂H₄, thanks to the optimal pore size nearly excluding C₂H₄, which is only observed in the state-of-the-art UTSA-300a so far. The DFT calculations were carried out to elucidate the specific adsorption sites for both acetylene and ethylene among these frameworks. The modeling results suggest that binding strength is highly related to aperture size and that CPL-1 shows the highest adsorption selectivity owing to the optimal pore size. This work demonstrates that engineering pore size enables us to fabricate the highly efficient metal-organic framework (MOF)-based adsorbents for specific gas separation on the basis of the isoreticular chemistry.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Single-side and double-side swing behaviours of a flexible porous coordination polymer with a rhombic-lattice structure

A rhombic porous coordination polymer can show special reversible–irreversible structural transformations with single-side and double-side swing, as well as sophisticated bond reconstitution behaviours.

Three isoreticular ssa-type MOFs derived from bent diisophthalate ligands: exploring the substituent effect on structural stabilities and selective C2H2/CH4 and CO2/CH4 adsorption properties

Three isoreticular ssa-type MOFs exhibit substituent-dependent framework stabilities against desolvation and gas adsorption properties.

Three isoreticular MOFs derived from nitrogen-functionalized diisophthalate ligands: exploring the positional effect of nitrogen functional sites on the structural stabilities and selective C2H2/CH4 and CO2/CH4 adsorption properties

The positional effect of nitrogen functional sites on the structural stability and gas adsorption property was explored in a family of ssa-type MOFs.

Enhanced gas separation performance of an ultramicroporous pillared-layer framework induced by hanging bare Lewis basic pyridine groups

An ultramicroporous pillared-layer framework exhibits extra high CO₂ and C₂ hydrocarbons over CH₄ separation performance under ambient conditions induced by hanging bare Lewis basic pyridine groups on the pore surface.

Functionalization of MOFs via a mixed-ligand strategy: enhanced CO2 uptake by pore surface modification

Two isostructural MOFs based on rare quaternary SBUs with a new (3,3,4,6)-connected topology have been assembled, which possess high porosity with highly polar pore systems, and also exhibit high uptake for CO₂ and significant selectivity for CO₂ over CH₄.

Potential of ultramicroporous metal–organic frameworks in CO2 clean-up

This article explains the need for energy-efficient large-scale CO₂ capture and briefly mentions the requirements for optimal solid sorbents for this application.

Three ligand-originated MOF isomers: the positional effect of the methyl group on structures and selective C2H2/CH4 and CO2/CH4 adsorption properties

The positional effect of the methyl group on structures and gas adsorption properties was explored in a copper-based MOF platform constructed from bent diisophthalate ligands bearing the methyl group at different positions.

A porous copper–organic framework with intersecting channels and gas adsorption properties

Integration of [CuI2I₂] and [CuII2(COO)₄(H₂O)₂] clusters produces a porous copper–organic framework, exhibiting high H₂ uptake capacity and excellent adsorption selectivity for CO₂ over N₂ and CH₄.

A comparative study of the effect of functional groups on C2H2 adsorption in NbO-type metal–organic frameworks

A comparative study of the effect of functional groups on C₂H₂ adsorption was performed in NbO-type metal–organic frameworks.

A rare Pb9 cluster-organic framework constructed from a flexible cyclotriphosphazene-functionalized hexacarboxylate exhibiting selective gas separation

A rare Pb₉ cluster-based organic framework constructed from a flexible cyclotriphosphazene-functionalized hexacarboxylate exhibits selective adsorption separation of C₂ hydrocarbons and CO₂ from CH₄ under ambient conditions.

Microporous rod metal–organic frameworks with diverse Zn/Cd–triazolate ribbons as secondary building units for CO2 uptake and selective adsorption of hydrocarbons

Three rod MOFs exhibiting remarkable CO₂ uptake and high CO₂ and C₂-hydrocarbons over CH₄ selectivity, as well as high isosteric heat of adsorption for C₂H₂.

Incorporation of Alkylamine into Metal-Organic Frameworks through a Brønsted Acid-Base Reaction for CO2 Capture

The escalating atmospheric CO₂ concentration is one of the most urgent environmental concerns of our age. To effectively capture CO₂ , various materials have been studied. Among them, alkylamine-modified metal-organic frameworks (MOFs) are considered to be promising candidates. In most cases, alkylamine molecules are integrated into MOFs through the coordination bonds formed between open metal sites (OMSs) and amine groups. Thus, the alkylamine density, as well as the corresponding CO₂ uptake in MOFs, are severely restricted by the density of OMSs. To overcome this limit, other approaches to incorporating alkylamine into MOFs are highly desired. We have developed a new method based on Brønsted acid-base reaction to tether alkylamines into Cr-MIL-101-SO₃ H for CO₂ capture. A systematic optimization of the amine tethering process was also conducted to maximize the CO₂ uptake of the modified MOF. Under the optimal amine tethering condition, the obtained tris(2-aminoethyl)amine-functionalized Cr-MIL-101-SO₃ H (Cr-MIL-101-SO₃ H-TAEA) has a cyclic CO₂ uptake of 2.28 mmol g^-1 at 150 mbar and 40 °C, and 1.12 mmol g^-1 at 0.4 mbar and 20 °C. The low-cost starting materials and simple synthetic procedure for the preparation of Cr-MIL-101-SO₃ H-TAEA suggest that it has the potential for large-scale production and practical applications.

Moisture-Stable Zn(II) Metal-Organic Framework as a Multifunctional Platform for Highly Efficient CO2 Capture and Nitro Pollutant Vapor Detection

A moisture-stable three-dimensional (3D) metal-organic framework (MOF), {(Me2NH2)[Zn2(bpydb)2(ATZ)](DMA)(NMF)2}n (1, where bpydb = 4,4'-(4,4'-bipyridine-2,6-diyl)dibenzoate, ATZ = deprotonated 5-aminotetrazole, DMA = N,N-dimethylacetamide, and NMF = N-methylformamide), with uncoordinated N-donor sites and charged framework skeleton was fabricated. This MOF exhibits interesting structural dynamic upon CO2 sorption at 195 K and high CO2/N2 (127) and CO2/CH4 (131) sorption selectivity at 298 K and 1 bar. Particularly, its CO2/CH4 selectivity is among the highest MOFs for selective CO2 separation. The results of Grand Canonical Monte Carlo (GCMC) simulation indicate that the polar framework contributes to the strong framework-CO2 binding at zero loading, and the tetrazole pillar contributes to the high CO2 uptake capacity at high loading. Furthermore, the solvent-responsive luminescent properties of 1 indicate that it could be utilized as a fluorescent sensor to detect trace amounts of nitrobenzene in both solvent and vapor systems.

Molecular modeling of zinc paddlewheel molecular complexes and the pores of a flexible metal organic framework

A new all-atom first-principles force field (FF) is constructed for the bimetallic, four-bladed zinc paddlewheel (ZPW) motif. Zinc-ligand interactions are described via Morse functions and the angular geometry at the metal centers is modeled with a pure ligand-ligand repulsion term. The ZPW-FF is principally based on 15 DFT-optimized model systems of general formula ZnPR.nL, where ZnP is the base Zn2(O2CR)4 unit, R = H, CH3 or CF3, L = NH3 or pyridine, and n = 0, 1 or 2. It correctly generates the distorted tetrahedral coordination of the uncapped [Zn2(O2CR)4] species in their ground states as well as giving reasonable structures and energies for the higher symmetry D4h transition state conformations. The zinc-ligand Morse function reference distance, r 0 , is further refined against 30 complexes located in the Cambridge Structural Database and this FF is applied to pore models of the flexible metal-organic framework (MOF) [Zn(bdc)2(dabco)]n (bdc = 1,4-benzendicarboxylate; dabco = 1,4-diazabicyclo(2.2.2)octane). A single pore model reproduces the unit cell of the evacuated MOF system while a 3×3 grid model is necessary to provide good agreement with the observed pronounced structural changes upon adsorption of either dimethylformamide or benzene.

C2H2 adsorption in three isostructural metal–organic frameworks: boosting C2H2 uptake by rational arrangement of nitrogen sites

Rational arrangement of nitrogen sites in metal–organic frameworks with the same structure is capable of boosting acetylene adsorption.

A highly stable amino-coordinated MOF for unprecedented block off N2 adsorption and extraordinary CO2/N2 separation

ZJU-198 for high CO₂/N₂ separation and low isosteric heat.