Electrochemistry of Simple Organometallic Models of Iron-Iron Hydrogenases in Organic Solvent and Water

Surprising Condensation Reactions of the Azadithiolate Cofactor

Azadithiolate, a cofactor found in all [FeFe]-hydrogenases, is shown to undergo acid-catalyzed rearrangement. Fe₂ [(SCH₂ )₂ NH](CO)₆ self-condenses to give Fe₆ [(SCH₂ )₃ N]₂ (CO)₁₇ . The reaction, which is driven by loss of NH₄ ⁺ , illustrates the exchange of the amine group. X-ray crystallography reveals that three Fe₂ (SR)₂ (CO)_x butterfly subunits interconnected by the aminotrithiolate [N(CH₂ S)₃ ]^3- . Mechanistic studies reveal that Fe₂ [(SCH₂ )₂ NR](CO)₆ participate in a range of amine exchange reactions, enabling new methodologies for modifying the adt cofactor. Ru₂ [(SCH₂ )₂ NH](CO)₆ also rearranges, but proceeds further to give derivatives with Ru-alkyl bonds Ru₆ [(SCH₂ )₃ N][(SCH₂ )₂ NCH₂ ]S(CO)₁₇ and [Ru₂ [(SCH₂ )₂ NCH₂ ](CO)₅ ]₂ S.

Radiative analysis of luminescence in photoreactive systems: Application to photosensitizers for solar fuel production

Most chemical reactions promoted by light and using a photosensitizer (a dye) are subject to the phenomenon of luminescence. Redistribution of light in all directions (isotropic luminescence emission) and in a new spectral range (luminescence emission spectrum) makes experimental and theoretical studies much more complex compared to a situation with a purely absorbing reaction volume. This has a significant impact on the engineering of photoreactors for industrial applications. Future developments associated with photoreactive system optimization are therefore extremely challenging, and require an in-depth description and quantitative analysis of luminescence. In this study, a radiative model describing the effect of luminescence radiation on the calculation of absorptance is presented and analyzed with the multiple inelastic-scattering approach, using Monte Carlo simulations. The formalism of successive orders of scattering expansion is used as a sophisticated analysis tool which provides, when combined with relevant physical approximations, convenient analytical approximate solutions. Its application to four photosensitizers that are representative of renewable hydrogen production via artificial photosynthesis indicates that luminescence has a significant impact on absorptance and on overall quantum yield estimation, with the contribution of multiple scattering and important spectral effects due to inelastic scattering. We show that luminescence cannot be totally neglected in that case, since photon absorption lies at the root of the chemical reaction. We propose two coupled simple and appropriate analytical approximations enabling the estimation of absorptance with a relative error below 6% in every tested situation: the zero-order scattering approximation and the gray single-scattering approximation. Finally, this theoretical approach is used to determine and discuss the overall quantum yield of a bio-inspired photoreactive system with Eosin Y as a photosensitizer, implemented in an experimental setup comprising a photoreactor dedicated to hydrogen production.

Deuteration mechanistic studies of hydrogenase mimics

The role of deuterium in disentangling key steps of the mechanisms of H₂ activation by mimics of hydrogenases is presented. These studies have allowed to a better understanding of the mode of action of the natural enzymes and their mimics.

Mononuclear Mn complexes featuring N,S-/N,N-donor and 1,3,5-triaza-7-phosphaadamantane ligands: synthesis and electrocatalytic properties

Mononuclear Mn(i) carbonyl complexes incorporating 2-mercaptobenzothiazole or 2-mercaptobenzimidazole and phosphaadamantane ligands were evaluated as electrocatalysts for the HER both in acetonitrile and acetonitrile/water.

Synthetic models of hydrogenases based on framework structures containing coordinating P, N-atoms as hydrogen energy electrocatalysts – from molecules to materials

Nowadays, hydrogen has become not only an extremely important chemical product but also a promising clean energy carrier for replacing fossil fuels. Production of molecular H2 through electrochemical hydrogen evolution reactions is crucial for the development of clean-energy technologies. The development of economically viable and efficient H2 production/oxidation catalysts is a key step in the creation of H2-based renewable energy infrastructure. Intrinsic limitations of both natural enzymes and synthetic materials have led researchers to explore enzyme-induced catalysts to realize a high current density at a low overpotential. In recent times, highly active widespread numerous electrocatalysts, both homogeneous or heterogeneous (immobilized on the electrode), such as transition metal complexes, heteroatom- or metal-doped nanocarbons, metal-organic frameworks, and other metal derivatives (calix [4] resorcinols, pectates, etc.), which are, to one extent or another, structural or functional analogs of hydrogenases, have been extensively studied as alternatives for Pt-based catalysts, demonstrating prospects for the development of a “hydrogen economy”. This mini-review generalizes some achievements in the field of development of new electrocatalysts for H2 production/oxidation and their application for fuel cells, mainly focuses on the consideration of the catalytic activity of M[P2N2]2 2+ (M = Ni, Fe) complexes and other nickel structures which have been recently obtained.

Revisiting the photochemical synthesis of [FeFe]-hydrogenase mimics: reaction optimization, mechanistic study and electrochemical behaviour

The photoreaction of [(μ-S)₂Fe₂(CO)₆] and alkenes or alkynes has been optimized to readily obtain functionalized [FeFe]-hydrogenase mimics. Irradiation under low CO pressure in THF produces the corresponding photo-adducts in good/acceptable (alkenes/alkynes) yields, with retention of the starting olefin stereochemistry. DFT-calculations provide plausible reaction pathways in both, singlet and triplet states. The DFT-calculation based in the singlet state is energetically more favorable. The electrochemical behavior of the synthesized compounds is also presented, including studies in acidic media. The electrochemical properties of the products vary in the presence of a double bond (cycloaddition of [(μ-S)₂Fe₂(CO)₆] to alkynes), respect to a single bond (cycloaddition to alkenes).

The photochemistry of [(μ-S)₂Fe₂(CO)₆] and alkenes or alkynes has been developed to a synthetically useful level. Computational data and electrochemistry of the photoadducts show interesting properties of these compounds.

A DFT study of structure and electrochemical properties of diiron-hydrogenase models with benzenedithiolato and benzenediselenato ligands

The chalcogen atom substitution in the Fe₂(bdt)(CO)₆ complex results in higher and lower proton affinities of iron and chalcogen atoms, respectively.

Spectroscopic and theoretical investigation of the [Fe2(bdt)(CO)6] hydrogenase mimic and some catalyst intermediates

In [Fe–Fe] hydrogenase mimic systems the ene-1,2-dithiolene ligands play an important role in the stabilisation of the redox-active metal center.

Sulphur–sulphur, sulphur–selenium, selenium–selenium and selenium–carbon bond activation using Fe3(CO)12: an unexpected formation of an Fe2(CO)6 complex containing a μ2,κ3-C,O,Se-ligand

Four diiron hexacarbonyl-complexes containing dithiolato (5), diselenolato (6), selenolato-thiolato (7) and μ²,κ³-C,O,Se-ligands (8), respectively have been prepared as [FeFe]-hydrogenase mimics.

Hydrogenase Biomimetics with Redox-Active Ligands: Synthesis, Structure, and Electrocatalytic Studies on [Fe2(CO)4(κ2-dppn)(µ-edt)] (edt = Ethanedithiolate; dppn = 1,8-bis(Diphenylphosphino)Naphthalene)

Addition of the bulky redox-active diphosphine 1,8-bis(diphenylphosphino)naphthalene (dppn) to [Fe2(CO)6(µ-edt)] (1) (edt = 1,2-ethanedithiolate) affords [Fe2(CO)4(κ2-dppn)(µ-edt)] (3) as the major product, together with small amounts of a P–C bond cleavage product [Fe2(CO)5{κ1-PPh2(1-C10H7)}(µ-edt)] (2). The redox properties of 3 have been examined by cyclic voltammetry and it has been tested as a proton-reduction catalyst. It undergoes a reversible reduction at E1/2 = −2.18 V and exhibits two overlapping reversible oxidations at E1/2 = −0.08 V and E1/2 = 0.04 V. DFT calculations show that while the Highest Occupied Molecular Orbital (HOMO) is metal-centred (Fe–Fe σ-bonding), the Lowest Unoccupied Molecular Orbital (LUMO) is primarily ligand-based, but also contains an antibonding Fe–Fe contribution, highlighting the redox-active nature of the diphosphine. It is readily protonated upon addition of strong acids and catalyzes the electrochemical reduction of protons at Ep = −2.00 V in the presence of CF3CO2H. The catalytic current indicates that it is one of the most efficient diiron electrocatalysts for the reduction of protons, albeit operating at quite a negative potential.

Energy-Efficient Hydrogen Evolution by Fe-S Electrocatalysts: Mechanistic Investigations

The intrinsic catalytic property of a Fe-S complex toward H₂ evolution was investigated in a wide range of acids. The title complex exhibited catalytic events at -1.16 and -1.57 V (vs Fc⁺/Fc) in the presence of trifluoromethanesulfonic acid (HOTf) and trifluoroacetic acid (TFA), respectively. The processes corresponded to the single reduction of the Fe-hydride-S-proton and Fe-hydride species, respectively. When anilinium acid was used, the catalysis occurred at -1.16 V, identical with the working potential of the HOTf catalysis, although the employment of anilinium acid was only capable of achieving the Fe-hydride state on the basis of the spectral and calculated results. The thermodynamics and kinetics of individual steps of the catalysis were analyzed by density functional theory (DFT) calculations and electroanalytical simulations. The stepwise CCE or CE (C, chemical; E, electrochemical) mechanism was operative from the HOTf or TFA source, respectively. In contrast, the involvement of anilinium acid most likely initiated a proton-coupled electron transfer (PCET) pathway that avoided the disfavored intermediate after the initial protonation. Via the PCET pathway, the heterogeneous electron transfer rate was increased and the overpotential was decreased by 0.4 V in comparison with the stepwise pathways. The results showed that the PCET-involved catalysis exhibited substantial kinetic and thermodynamic advantages in comparison to the stepwise pathway; thus, an efficient catalytic system for proton reduction was established.

Mechanistic Insight into Electrocatalytic H2 Production by [Fe2(CN){μ-CN(Me)2}(μ-CO)(CO)(Cp)2]: Effects of Dithiolate Replacement in [FeFe] Hydrogenase Models

DFT has been used to investigate viable mechanisms of the hydrogen evolution reaction (HER) electrocatalyzed by [Fe₂(CN){μ-CN(Me)₂}(μ-CO)(CO)(Cp)₂] (1) in AcOH. Molecular details underlying the proposed ECEC electrochemical sequence have been studied, and the key functionalities of CN^- and amino-carbyne ligands have been elucidated. After the first reduction, CN^- works as a relay for the first proton from AcOH to the carbyne, with this ligand serving as the main electron acceptor for both reduction steps. After the second reduction, a second protonation occurs at CN^- that forms a Fe(CNH) moiety: i.e., the acidic source for the H₂ generation. The hydride (formally 2e/H⁺), necessary to the heterocoupling with H⁺ is thus provided by the μ-CN(Me)₂ ligand and not by Fe centers, as occurs in typical L₆Fe₂S₂ derivatives modeling the hydrogenase active site. It is remarkable, in this regard, that CN^- plays a role more subtle than that previously expected (increasing electron density at Fe atoms). In addition, the role of AcOH in shuttling protons from CN^- to CN(Me)₂ is highlighted. The incompetence for the HER of the related species [Fe₂{μ-CN(Me)₂}(μ-CO)(CO)₂(Cp)₂]⁺ (2⁺) has been investigated and attributed to the loss of proton responsiveness caused by CN^- replacement with CO. In the context of hydrogenase mimicry, an implication of this study is that the dithiolate strap, normally present in all synthetic models, can be removed from the Fe₂ core without loss of HER, but the redox and acid-base processes underlying turnover switch from a metal-based to a ligand-based chemistry. The versatile nature of the carbyne, once incorporated in the Fe₂ scaffold, could be exploited to develop more active and robust catalysts for the HER.

Electronic and molecular structure relations in diiron compounds mimicking the [FeFe]-hydrogenase active site studied by X-ray spectroscopy and quantum chemistry

Synthetic diiron compounds of the general formula Fe₂(μ-S₂R)(CO)_n(L)_6-n (R = alkyl or aromatic groups; L = CN^- or phosphines) are versatile models for the active-site cofactor of hydrogen turnover in [FeFe]-hydrogenases. A series of 18 diiron compounds, containing mostly a dithiolate bridge and terminal ligands of increasing complexity, was characterized by X-ray absorption and emission spectroscopy in combination with density functional theory. Fe K-edge absorption and Kβ main-line emission spectra revealed the varying geometry and the low-spin state of the Fe(i) centers. Good agreement between experimental and calculated core-to-valence-excitation absorption and radiative valence-to-core-decay emission spectra revealed correlations between spectroscopic and structural features and provided access to the electronic configuration. Four main effects on the diiron core were identified, which were preferentially related to variation either of the dithiolate or of the terminal ligands. Alteration of the dithiolate bridge affected mainly the Fe-Fe bond strength, while more potent donor substitution and ligand field asymmetrization changed the metal charge and valence level localization. In contrast, cyanide ligation altered all relevant properties and, in particular, the frontier molecular orbital energies of the diiron core. Mutual benchmarking of experimental and theoretical parameters provides guidelines to verify the electronic properties of related diiron compounds.

Hydrogenase Enzymes and Their Synthetic Models: The Role of Metal Hydrides

Hydrogenase enzymes efficiently process H2 and protons at organometallic FeFe, NiFe, or Fe active sites. Synthetic modeling of the many H2ase states has provided insight into H2ase structure and mechanism, as well as afforded catalysts for the H2 energy vector. Particularly important are hydride-bearing states, with synthetic hydride analogues now known for each hydrogenase class. These hydrides are typically prepared by protonation of low-valent cores. Examples of FeFe and NiFe hydrides derived from H2 have also been prepared. Such chemistry is more developed than mimicry of the redox-inactive monoFe enzyme, although functional models of the latter are now emerging. Advances in physical and theoretical characterization of H2ase enzymes and synthetic models have proven key to the study of hydrides in particular, and will guide modeling efforts toward more robust and active species optimized for practical applications.

Mechanism of H2 Production by Models for the [NiFe]-Hydrogenases: Role of Reduced Hydrides

The intermediacy of a reduced nickel-iron hydride in hydrogen evolution catalyzed by Ni-Fe complexes was verified experimentally and computationally. In addition to catalyzing hydrogen evolution, the highly basic and bulky (dppv)Ni(μ-pdt)Fe(CO)(dppv) ([1](0); dppv = cis-C2H2(PPh2)2) and its hydride derivatives have yielded to detailed characterization in terms of spectroscopy, bonding, and reactivity. The protonation of [1](0) initially produces unsym-[H1](+), which converts by a first-order pathway to sym-[H1](+). These species have C1 (unsym) and Cs (sym) symmetries, respectively, depending on the stereochemistry of the octahedral Fe site. Both experimental and computational studies show that [H1](+) protonates at sulfur. The S = 1/2 hydride [H1](0) was generated by reduction of [H1](+) with Cp*2Co. Density functional theory (DFT) calculations indicate that [H1](0) is best described as a Ni(I)-Fe(II) derivative with significant spin density on Ni and some delocalization on S and Fe. EPR spectroscopy reveals both kinetic and thermodynamic isomers of [H1](0). Whereas [H1](+) does not evolve H2 upon protonation, treatment of [H1](0) with acids gives H2. The redox state of the "remote" metal (Ni) modulates the hydridic character of the Fe(II)-H center. As supported by DFT calculations, H2 evolution proceeds either directly from [H1](0) and external acid or from protonation of the Fe-H bond in [H1](0) to give a labile dihydrogen complex. Stoichiometric tests indicate that protonation-induced hydrogen evolution from [H1](0) initially produces [1](+), which is reduced by [H1](0). Our results reconcile the required reductive activation of a metal hydride and the resistance of metal hydrides toward reduction. This dichotomy is resolved by reduction of the remote (non-hydride) metal of the bimetallic unit.

Synthesis of Diiron(I) Dithiolato Carbonyl Complexes

Virtually all organosulfur compounds react with Fe(0) carbonyls to give the title complexes. These reactions are reviewed in light of major advances over the past few decades, spurred by interest in Fe2(μ-SR)2(CO)x centers at the active sites of the [FeFe]-hydrogenase enzymes. The most useful synthetic route to Fe2(μ-SR)2(CO)6 involves the reaction of thiols with Fe2(CO)9 and Fe3(CO)12. Such reactions can proceed via mono-, di-, and triiron intermediates. The reactivity of Fe(0) carbonyls toward thiols is highly chemoselective, and the resulting dithiolato complexes are fairly rugged. Thus, many complexes tolerate further synthetic elaboration directed at the organic substituents. A second major route involves alkylation of Fe2(μ-S2)(CO)6, Fe2(μ-SH)2(CO)6, and Li2Fe2(μ-S)2(CO)6. This approach is especially useful for azadithiolates Fe2[(μ-SCH2)2NR](CO)6. Elaborate complexes arise via addition of the FeSH group to electrophilic alkenes, alkynes, and carbonyls. Although the first example of Fe2(μ-SR)2(CO)6 was prepared from ferrous reagents, ferrous compounds are infrequently used, although the Fe(II)(SR)2 + Fe(0) condensation reaction is promising. Almost invariably low-yielding, the reaction of Fe3(CO)12, S8, and a variety of unsaturated substrates results in C-H activation, affording otherwise inaccessible derivatives. Thiones and related C═S-containing reagents are highly reactive toward Fe(0), often giving complexes derived from substituted methanedithiolates and C-H activation.