Oxidorhenium(V) Complexes with Tetradentate Iminophenolate Ligands: Influence of Ligand Flexibility on the Coordination Motif and Oxygen-Atom-Transfer Activity

Inspired by Nature-Functional Analogues of Molybdenum and Tungsten-Dependent Oxidoreductases

Throughout the previous ten years many scientists took inspiration from natural molybdenum and tungsten-dependent oxidoreductases to build functional active site analogues. These studies not only led to an ever more detailed mechanistic understanding of the biological template, but also paved the way to atypical selectivity and activity, such as catalytic hydrogen evolution. This review is aimed at representing the last decade’s progress in the research of and with molybdenum and tungsten functional model compounds. The portrayed systems, organized according to their ability to facilitate typical and artificial enzyme reactions, comprise complexes with non-innocent dithiolene ligands, resembling molybdopterin, as well as entirely non-natural nitrogen, oxygen, and/or sulfur bearing chelating donor ligands. All model compounds receive individual attention, highlighting the specific novelty that each provides for our understanding of the enzymatic mechanisms, such as oxygen atom transfer and proton-coupled electron transfer, or that each presents for exploiting new and useful catalytic capability. Overall, a shift in the application of these model compounds towards uncommon reactions is noted, the latter are comprehensively discussed.

Isomers in chlorido and alkoxido-substituted oxidorhenium(v) complexes: effects on catalytic epoxidation activity

The syntheses and characterizations of oxidorhenium(v) complexes trans-dichlorido [ReOCl2(PPh3)(L1a)] (trans-2a), cis-dichlorido [ReOCl2(PPh3)(L1b)] (cis-2b) and ethoxido-complex [ReO(OEt)(L1b)2] (4b), ligated with the dimethyloxazoline-phenol ligands HL1a and HL1b are described. The bidentate ligand HL1a (2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)-phenol) is unsubstituted on the phenol ring; ligand HL1b (2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)-4-nitrophenol) contains a nitro group in para-position to the hydroxy group. In the reaction of precursor complex [ReOCl3(PPh3)2] and HL1a the two stereoisomers cis/trans-2a, with respect to chlorido ligands, are formed. The solid state structures of both isomers cis- and trans-2a were determined by single crystal X-ray diffraction analysis. In contrast, with ligand HL1b, only the cis-isomer cis-2b was obtained. Ethoxido-complex 4b is exclusively obtained when precursor [ReOCl3(OPPh3)(SMe2)] is reacted with 2 equiv. of HL1b in ethanol in the presence of the base 2,6-dimethylpyridine (lutidine). If no lutidine is added, chlorido-complex [ReOCl(L1b)2] (3b) is obtained. Complexes [ReOCl2(PPh3)(L1a)] (cis/trans-2a), [ReOCl2(PPh3)(L1b)] (cis-2b), [ReO(OMe)(L1a)2] (4a) and [ReO(OEt)(L1b)2] (4b) were tested as homogeneous catalysts in the benchmark reaction of cyclooctene epoxidation. The influence of isomerism and effects of ligand substitutions on catalytic activity was investigated. Based on the time-conversion plots it can be concluded that cis/trans-isomerism does not influence catalytic activity, but electron-withdrawing substituents, as in cis-2b, 3b and 4b, show a beneficial effect.

Structural conversion of three copper(ii) complexes with snapshot observations based on the different crystal colours and morphology

Three novel Cu(ii) complexes [Cu₂(L)₂(MeOH)₂] (1), [Cu₂(L)₂(H₂O)₂] (2) and [CuL(H₂O)] (3) (L = (E)-2-((2-hydroxy-4-methoxybenzylidene)amino)acetic acid) have been obtained in different time scales of reaction processing. Complexes 1 and 2 are kinetically controlled products and 3 is a thermodynamically stable product. Single crystal X-ray diffraction analyses revealed that 1 and 2 are binuclear complexes except for different coordination solvents. 3 is a mononuclear complex. Complex 1 is mainly obtained in methanol solution, while 2 and 3 are stable in aqueous solvents. Based on the understanding of crystal structures of the three complexes, reversibly transforming crystal 2 to crystal 1 at room temperature has been realised, which has been confirmed by the change of colours and morphology measured by SEM. The research work is very important for controllable synthesis of coordination complexes.

Structural conversion of three novel Cu(ii) complexes [Cu₂(L)₂(MeOH)₂] (1), [Cu₂(L)₂(H₂O)₂] (2) and [CuL(H₂O)] (3) (L = (E)-2-((2-hydroxy-4-methoxybenzylidene)amino)acetic acid) in different time scales of reaction processing.

Steric influence of salicylaldehyde-based Schiff base ligands on the formation of trans-[Re(PR3)2(Schiff base)]+ complexes

Complexes of the type trans-[Re(PR₃)₂(Schiff base)]⁺ (R = ethyl and/or phenyl) 2-7 were prepared by the reaction of (nBu₄N)[ReOCl₄] with H₂sal₂en or H₂sal₂ibn followed by addition of a tertiary phosphine. The trans-[Re(PR₃)₂(sal₂en)]⁺ complexes 2-4 were stable in solution, whereas the trans-[Re(PR₃)₂(sal₂ibn)]⁺ complexes 6-7 were observed to convert to their corresponding cis-[ReO(PR₃)(sal₂ibn)]⁺ products through a process involving ligand dissociation, metal oxidation, and Schiff base ligand rearrangement. The conversion of the trans-[Re(PR₃)₂(sal₂ibn)]⁺ complexes is likely driven by steric interactions between the bulky backbone gem-dimethyl groups of the sal₂ibn ligand and the phosphine ligands. These complexes were isolated and characterized by ¹H and ¹³C NMR, FT-IR spectroscopy, cyclic voltammetry, and single crystal X-ray diffraction. The results reported herein provide insight into the factors that drive trans-[Re(PR₃)₂(Schiff base)]⁺ complex formation. This will aid in the development of novel ^186/188Re therapeutic agents and the design of novel bifunctional N₂O₂ Schiff base ligands.

Solvent-assisted structural conversion involving bimetallic complexes based on the tris(oxalato)ferrate(iii) unit with the green → blue → red crystal color sequence

Three new complexes forming a dynamic system and given by the following formulae: [Cu₂(bpy)₄Fe(ox)₃]NO₃·H₂O 1, [Fe(bpy)₃]₂[Fe(ox)₃]NO₃·10H₂O 2 and [Cu(bpy)₃]₂[Fe(ox)₃]NO₃·10H₂O 3 (bpy - 2,2'-bipyridine, ox - oxalate), were synthesized from a methanol-water mixture or water, and characterized structurally, spectroscopically and magnetically. Compound 1 contains trinuclear [(bpy)₂Cu(μ-ox)Fe(ox)(μ-ox)Cu(bpy)₂]⁺ cations, while 2 and 3 can be classified as isomorphous ionic compounds, with alternately arranged hydrophobic and hydrophilic layers of mononuclear complex ions. The green crystals of 1 are perfectly stable in air, whereas in selected solvents they undergo irreversible solvent-assisted recrystallization towards red crystals of 2, which is also accompanied by the appearance of mononuclear blue copper complexes with oxalate, 2,2'-bipyridine and aqua ligands, already described in the literature. The above crystallization/recrystallization processes indicate variable solution contents. The whole effect is accelerated by both the increased temperature and day light irradiation, however, different products from the pool prevail under various conditions. The observed transformation can be understood in terms of thermodynamic and kinetic control, involving the known photo-activity of [Fe(ox)₃]^3- moieties and the effect of quadruple aryl embrace (QAE) on the stability of the crystal network. Considering the presence of Fe^III-ox-Cu^II connectivity in 1 we performed detailed magnetic studies and theoretical calculations for this compound. Due to the strong asymmetry of Cu-O bonds the antiferromagnetic coupling is rather weak, with J_Cu-Fe being ca. -3.4 cm^-1 (using Hamiltonian of the type H = -J_Cu-Fe(S_Cu1S_Fe + S_FeS_Cu2) -J_Cu-Cu(S_Cu1S_Cu2)). We found that these values are very close to those predicted by B3LYP/6-311G* calculations.

Stereoisomers and functional groups in oxidorhenium(v) complexes: effects on catalytic activity

The syntheses of oxidorhenium(v) complexes [ReOCl(L1a-c)₂] (3a-c), equipped with the bidentate, mono-anionic phenol-dimethyloxazoline ligands HL1a-c are described. Ligands HL1b-c contain functional groups on the phenol ring, compared to parent ligand 2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)-phenol H1a; namely a methoxy group ortho to the hydroxyl position (2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)-6-methoxyphenol, H1b), or a nitro group para to the hydroxyl position (2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)-4-nitrophenol, H1c). Furthermore, oxidorhenate(v) complexes (NBu₄)[ReOCl₃(L1a-b)] (2a-b) were synthesized for solid state structural comparisons to 3a-b. All novel complexes are fully characterized including NMR, IR and UV-Vis spectroscopy, MS spectrometry, X-ray crystallography, elemental analysis as well as cyclic voltammetry. The influence of functional groups (R = -H, -OMe and -NO₂) on the catalytic activity of 3a-c was investigated in two benchmark catalytic reactions, namely cyclooctene epoxidation and perchlorate reduction. In addition, the previously described oxidorhenium(v) complex [ReOCl(oz)₂] (4), employing the phenol-oxazoline ligand 2-(4,5-dihydro-2-oxazolyl)phenol Hoz, was included in these catalysis studies. Complex 4 is a rare case in oxidorhenium(v) chemistry where two stereoisomers could be separated and fully characterized. With respect to the position of the oxazoline nitrogen atoms on the rhenium atom, these two stereoisomers are referred to as N,N-cis and N,N-trans isomer. A potential correlation between spectroscopic and structural data to catalytic activity was evaluated.

Comparison of molybdenum and rhenium oxo bis-pyrazine-dithiolene complexes - in search of an alternative metal centre for molybdenum cofactor models

A pair of structurally precise analogues of molybdenum and rhenium complexes, [Et4N]/K2[MoO(prdt)2] and K[ReO(prdt)2] (prdt = pyrazine-2,3-dithiolene), were synthesized. These complexes serve as structural models for the active sites of bacterial molybdenum cofactor containing enzymes. They were comprehensively characterized and investigated by NMR, computationally supported IR and resonance Raman spectroscopy, cyclic voltammetry, mass spectrometry, elemental analysis and single-crystal X-ray diffraction. All compiled data are discussed in the context of comparing chemical and electronic structures and consequences thereof. This study constitutes the first investigation of a potential alternative Moco model system bearing rhenium as the central metal in an identical coordination environment to its molybdenum analogue. Structural evaluation revealed a slightly stronger M[double bond, length as m-dash]O bond in the rhenium complex in accordance with spectroscopic results, i.e. observed bond strengths. Thermodynamic parameters for the redox processes MoIV ↔ MoV and ReIV ↔ ReV were obtained by temperature dependent cyclic voltammetry. In contrast to molybdenum, rhenium loses entropy upon reduction and its redox potential is more temperature sensitive, indicating more significant differences than the respective diagonal relationship between the two metals in the periodic table might suggest and questioning rhenium's suitability as a functional artificial active site metal.

Oxygen activation and catalytic aerobic oxidation by Mo(iv)/(vi) complexes with functionalized iminophenolate ligands

Synthesis of molybdenum(vi) dioxido complexes 1-3, coordinated by one or two functionalized iminophenolate ligands HL1 or HL2, bearing a donor atom side chain or a phenyl substituent, respectively, allowed for systematic investigation of the oxygen atom transfer (OAT) reactivity of such complexes towards phosphanes. Depending on stoichiometry and employed phosphane (PMe3 or PPh3), different molybdenum(iv) and molybdenum(v) complexes 4-7 were obtained. Whereas molybdenum(iv) complexes 4 and 5, bearing a terminal PMe3 ligand, readily reacted with molecular O2 to form oxido peroxido complexes 8 and 9, phosphane free μ-oxido bridged dinuclear molybdenum(v) complexes 6 and 7 proved to be stable towards oxidation with molecular O2 under ambient conditions. Single-crystal X-ray diffraction analyses revealed different isomeric structures in the solid state for dioxido complexes 1 and 2 in comparison with oxido phosphane complex 5, dinuclear oxido μ-oxido complex 6 and oxido peroxido complexes 8 and 9, pointing towards an isomeric rearrangement during OAT. Compounds 1 and 2 were furthermore tested for their ability to catalyze the aerobic oxidation of PMe3 and PPh3. A significant difference in catalytic activity has been observed in the oxidation of PMe3, where complex 1 bearing donor atom functionalized ligands led to higher conversion and selectivity than complex 2 coordinated by phenyl iminophenolate ligands. In the oxidation of PPh3, complex 2 leads to higher conversion compared to 1. In a control experiment, phenyl-based dinuclear μ-oxido complex 7, derived from complex 2, was found to be catalytically active, which suggests a lower energy barrier for disproportionation into [MoO(L)2] and [MoO2(L)2] in comparison with methoxypropylene based compound 6, a prerequisite for subsequent reactivity toward molecular O2.