Multifunctional Luminescent Eu(III)-Based Metal–Organic Framework for Sensing Methanol and Detection and Adsorption of Fe(III) Ions in Aqueous Solution

Highly sensitive sensing of DPA by lanthanide metal-organic frameworks and detection of fiber membranes

The detection of 2,6-pyridinecarboxylic acid (DPA), as a biomarker of Bacillus anthracis, has attracted wide attention. In previous reports of DPA detection, fluorescent probes may not have high specificity. Therefore, the rational design and development of fluorescent sensors with excellent performance is of great significance for the detection of DPA. In this study, two novel lanthanide metal-organic frameworks (Ln-MOFs) were synthesized by hydrothermal method using 3-polyfluorobiphenyl-3 ', 4,5 ' -tricarboxylic acid (H2FPTA) as ligand. Studies have shown that Ln-MOFs can detect DPA in real time, with detection limits of 0.54 μM and 0.67 μM, respectively, and have a high recovery rate (95 % -108 %) in fetal bovine serum. As a self-calibration sensor, other substances in the blood can be clearly distinguished by a two-dimensional fluorescence code diagram. After the Ln-MOFs were spun into nanofiber membranes, they responded quickly to DPA. This increases practicability and provides a promising idea for the development of simple and efficient ratio sensors.

Synthesis and Fluorescence Sensing for Nitro Explosives and Pesticides of Two Cd-Coordination Polymers

Two cadmium coordination polymers (CPs), {[Cd(zgt)(2,2'-bipy)(H2O)]·H2O}n (1) and {[Cd(zgt)(BPP)(H2O)]·H2O}n (2) (H2zgt = 5-methoxyresorcinic acid, 2,2'-bipy = 2,2'-bipyridine, and BPP = 1,3-bis(4-pyridyl)propane), were prepared by the hydrothermal method. The structures of CPs 1-2 were characterized by IR, TGA, X-ray powder diffraction, and elemental analysis. The single-crystal structure analysis shows that CP 1 is a typical 1D chain structure and CP 2 belongs to a 2D layered structure. Based on the excellent luminescence properties of CP 1 and 2, fluorescence sensing experiments were carried out for explosives and pesticides. The results of the explosion sensing experiment showed that CP 1 and 2 had an excellent fluorescence quenching effect on PNBA (p-nitrobenzoic acid) and TNP (2,4,6-trinitrophenol), respectively, and the detection limits were 3.28 and 11.4 nM, respectively. Interestingly, both CP 1 and 2 showed good fluorescence quenching against the pesticide fluridine (Flu), and CP 1 had a lower detection limit and was more sensitive. In addition, the fluorescence quenching mechanism was discussed in detail by the UV absorption spectrum and density functional theory. In order to explore its practical application, the content of Flu in water samples was detected by a labeling recovery method.

Effects of excitation power density on the Stern-Volmer constant measurement

The Stern-Volmer constant (KSV) is an important parameter to describe the capability of energy transfer to oxygen for porphyrin and its derivatives. By fitting Stern-Volmer equation, IP0/IP = 1 + KSV[O2], the KSV is generally determined through phosphorescence intensities (IP) under aerobic and oxygen-free conditions. In this work, the effect of excitation power density on the KSV measurement is theoretically analyzed and experimentally studied, using palladium octaethylporphyrin (PdOEP) as an example. The IP of PdOEP increased nonlinearly with excitation power density, and the power dependent slope of IP0/IP could be obtained. By way of the functional relationship between the slope of IP0/IP and power density, the real KSV of PdOEP was fitted to be 58 ± 2 kPa-1. The oxygen-dependent phosphorescence lifetimes (τP) and IP under a weak excitation power are also measured to calculate the real KSV, which verifies our analysis.

Lanthanide Metal-Organic Framework Isomers with Novel Water-Boosting Lanthanide Luminescence Behaviors

Lanthanide metal-organic frameworks (Ln-MOFs) with exceptional optical performance and structural diversity offer a unique platform for the development of luminescent materials. However, Ln-MOFs often suffer from luminescence quenching by high-vibrating oscillators, especially in aqueous solution. Thus, multiple strategies have been adopted to improve the luminescence of Ln3+. Anomalous research about water-induced lanthanide luminescence enhancement of Ln-MOFs is in the primary stage. Here, two Eu-based metal-organic framework (Eu-MOF) isomers named QXBA-Eu-1 and QXBA-Eu-2 were constructed by using the same ligand under different solvent thermal conditions, which exhibited distinctive water- and methanol-boosting emission behaviors. As for QXBA-Eu-1, water and methanol molecules replaced the free N,N-dimethylacetamide (DMA) molecules in the framework, repressed the rotation or libration suppression of the QXBA linker, and formed hydrogen bonds with the coordinated water molecules, which suppressed the O-H high-energy vibrations, reduced nonradiative transitions, stabilized the T1 state, and facilitated the intersystem crossing (ISC) process. For QXBA-Eu-2, water molecules tended to replace the coordinated DMA ligands, which altered the S1 and T1 energy levels of the ligand and facilitated the ligand-to-metal energy transfer (LMET) process and strengthened the luminescence of Eu3+. Importantly, free solvent molecules and the hydroxylation of Eu3+ centers also restrained the rotation or libration of the QXBA linker, by which the nonradiative transition was further inhibited and the lanthanide luminescence enhanced. Thus, this work not only opened an unprecedented path to enhance lanthanide luminescence in aqueous solution but also expanded its application scope.

A MOF-on-MOF composite encapsulating sensitized Tb(III) as a built-in self-calibrating fluorescent platform for selective sensing of F ions

The establishment of simple and sensitive detection methods for fluoride ion (F^-) is of great importance for its effective prevention and control, and metal-organic framework (MOF) has attracted much attention for sensing applications due to its high surface areas and tunable structures. Herein, we successfully synthesized a fluorescent probe for ratiometric sensing of F^- by encapsulating sensitized Tb³⁺ in a MOF-on-MOF material (UIO66/MOF801, with the formula of C₄₈H₂₈O₃₂Zr₆ and C₂₄H₂O₃₂Zr₆, respectively). We found that Tb³⁺@UIO66/MOF801 can be used as a built-in fluorescent probe for fluorescence-enhanced sensing of F^-. Interestingly, the two fluorescence emission peaks of Tb³⁺@UIO66/MOF801 at 375 nm and 544 nm exhibit different fluorescence responses to F^- under excitation at 300 nm. The 544 nm peak is sensitive to F^-, while the 375 nm peak is insensitive to it. Photophysical analysis indicated that the photosensitive substance was formed, which promotes the absorption of 300 nm excitation light by the system. Self-calibrating fluorescent detection of F^- was achieved due to the unequal energy transfer toward the two different emission centers. The detection limit of Tb³⁺@UIO66/MOF801 for F^- was 4.029 μM, which is far lower than the WHO guideline for drinking water. Moreover, the ratiometric fluorescence strategy showed a high concentration tolerance of interference, because of its inner-reference effect. This work highlights the high potential of lanthanide ion encapsulated MOF-on-MOF as environmental sensors, and offers a scalable way for construction of the ratiometric fluorescence sensing systems.

A Theoretical Perspective to Decipher the Origin of High Hydrogen Storage Capacity in Mn(II) Metal-Organic Framework

Herein, we report a detailed periodic DFT investigation of Mn(II)-based [(Mn₄ Cl)₃ (BTT)₈ ]^3- (BTT^3- =1,3,5-benzenetristetrazolate) metal-organic framework (MOF) to explore various hydrogen binding pockets, nature of MOF…H₂ interactions, magnetic coupling and, H₂ uptake capacity. Earlier experiments found an uptake capacity of 6.9 wt % of H_2, with the heat of adsorption estimated to be ∼10 kJ/mol, which is one among the highest for any MOFs reported. Our calculations unveil different binding sites with computed binding energy varying from -6 to -15 kJ/mol. The binding of H₂ at the Mn²⁺ site is found to be the strongest (site I), with H₂ found to bind Mn²⁺ ion in a η² fashion with a distance of 2.27 Å and binding energy of -15.4 kJ/mol. The bonding analysis performed using NBO and AIM reveal a strong donation of σ (H₂ ) to the d_z ² orbital of the Mn²⁺ ion responsible for such large binding energy. The other binding pockets, such as -Cl (site II) and BTT ligands (site III and IV) were found to be weaker, with the binding energy decreasing in the order I>II>III>IV. The average binding energy computed for these four sites put together is 9.6 kJ/mol, which is in excellent agreement with the experimental value of ∼10 kJ/mol. We have expanded our calculations to compute binding energy for multiple sites simultaneously, and in this model, the binding energy per site was found to decrease as we increased the number of H₂ molecules suggesting electronic and steric factors controlling the overall uptake capacity. The calculated adsorption isotherm using the GCMC method reproduces the experimental observations. Further, the magnetic coupling computed for the unbound MOF reveals moderate ferromagnetic and strong antiferromagnetic coupling within the tetrameric {Mn₄ } unit leading to a three-up-one-down spin configuration as the ground state. These were then coupled ferromagnetically to other tetrameric units in the MOF network. The magnetic coupling was found to alter only marginally upon gas binding, suggesting that both exchange interaction and the spin-states are unlikely to play a role in the H₂ uptake. This is contrary to the O₂ uptake studied lately, where strong dependence on exchange-coupling/spin state was witnessed, suggesting exchange-coupling/magnetic field dependent binding as a viable route for gas separation.

Eu(III) Functionalized Crystalline Polyimide Hydrogel Film as a Multifunctional Platform for Consecutive Sensing of Spermine and Copper Ions

In this study, a novel Eu(III) functionalized crystalline polyimide hydrogel film (Eu-1) is fabricated by incorporating highly stable polyimide (PI) into a sodium alginate (SA) matrix, followed by cross-linking reaction with Eu³⁺ ions. Based on different fluorescence responses, Eu-1 is used for the consecutive detection of spermine (Spm) and copper ions (Cu²⁺). Eu-1 can be employed as a sensor for polyamine, especially for Spm with significant fluorescence enhancement based on the "turn on" mode. The fluorescent sensor Eu-1@Spm constructed by the Eu-1 and Spm can be further used as a "turn off" sensor to quantitatively monitor Cu²⁺. The good selectivity combined with the low detection limit of the sensor meets the requirements for monitoring Cu²⁺. The possible luminescence response mechanisms to Spm and Cu²⁺ have been studied through experimental data and theoretical calculations. In addition, a back-propagation neural network (BPNN) model based on an Eu-1@Spm sensor is constructed, which can accurately distinguish Cu²⁺ concentrations by deep machine learning (ML). This work not only puts forward a facile method to prepare a novel Eu-functionalized PI-based hybrid film but also demonstrates the potential of PI-based film materials for fluorescence detection.

Two novel zinc-based MOFs as luminescence sensors to detect phenylglyoxylic acid

Automobile exhaust gases, plastic pollutants, smoking, and other harmful substances can cause serious harm to human beings and the environment. Styrene, as a common airborne toxin, enters the human body through breathing or the skin and is discharged in the form of phenylglyoxylic acid (PGA). Therefore, specific, sensitive and trace detection of PGA is particularly important. Here, two zinc-based metal-organic frameworks {[Zn₂L₁(DMF)₂H₂O](DMF)₂H₂O}_n, {[Zn₄(L₂)₂(DMF)₂(H₂O)₃](DMF)₈}_n (L₁ = 2,5-bis((3-carboxylphenyl)amino)terephthalic acid, L₂ = 2,5-bis((4-carboxyphenyl)amino)terephthalic acid) have been reported as 1 and 2, respectively. Both 1 and 2 present 3D structures, which can both be simplified as 4,4,4-c net topology. It is worth mentioning that 2 has two different kinds of Zn SBUs as connecting nodes in the structure. Besides, compared with the other materials for the detection of PGA, 1 and 2 exhibit relatively low detection limits (LODs), both in water and in urine (where the LODs for 1 in water and urine were 0.33 μM and 0.43 μM in the range of 0-0.39 mM, and those for 2 were 0.28 μM and 0.49 μM in the range of 0-0.59 mM, respectively). In addition, the sensors have excellent anti-interference ability, high stability, rapid response, and can easily distinguish between different concentrations of PGA with the naked eye. The developed paper probes were suitable for practical sensing applications for portable detection of PGA in urine.

Blue-Emitting Ligand-Mediated Assembly of Rare-Earth MOFs toward White-Light Emission, Sensing, Magnetic, and Catalytic Studies

New lanthanide carboxylate compounds with two- (2D) and three-dimensional (3D) structures have been prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as an organic linker. The compounds, [Ln(C₁₄H₈O₆)(C₇O₃H₄)·2H₂O]·4(H₂O), Ln = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy and [Ln(C₇O₃H₄)₃·(C₃H₇ON)·(H₂O)]·2(H₂O)(C₃H₇NO), Ln = La, Ce, Pr, have two- and three-dimensional structures, respectively. In all compounds, lanthanide ions are connected together, forming a dimer, which is connected by the 2,5-BPTA ligand. In the two-dimensional structure, there are two 2,5-BPTA moieties present, and in the three-dimensional structure, there are three 2,5-BPTA moieties present. The lanthanide centers are nine-coordinated, the 2D structure has a tricapped trigonal prismatic arrangement, and the 3D structure has a monocapped distorted square antiprismatic arrangement. The Pr compound forms in both 2D and 3D structures, whose formation depends on the time of the reaction (2 days─2D and 5-6 days─3D). The ligand emits in the blue region, and using the characteristic emission of Eu³⁺ (red) and Tb³⁺ (green) ions, we achieve white light emission in the (Y_0.96Tb_0.02Eu_0.02) compound. The overall quantum yield for the white light emission is 28%. The strong green luminescence of the Tb³⁺-containing compound was employed to selectively sense the Cr³⁺ and Fe³⁺ ions in aqueous solution with limits of detection (LODs) at 0.41 and 8.6 ppm, respectively. The Tb compound was found to be a good heterogeneous catalyst for the Ullman-type O-arylation reaction between phenol and bromoarene with yields of 95%. Magnetic studies on the Gd-, Tb-, and Dy-containing compounds showed weak exchange interactions within the dimeric Ln₂ units. The present work demonstrates the many utilities of the rare-earth-containing MOFs, especially toward white-light emission, metal-ion sensing, and heterogeneous catalysis.

Film-based fluorescent sensor for visual monitoring and efficient removal of aniline in solutions and gas phase

Aniline has attracted much concern for its long degradation half-life and huge toxicity to the environment and human beings. Therefore, the development of a multi-functional device for visual detection and efficient removal of aniline was highly anticipated. In our work, the small-size Eu@UiO-66(COOH) was obtained by post-synthesis modification (PSM), and then the film-based fluorescent sensor was prepared by crosslinking reaction. The films not only showed incredible mechanical stability and potential for large-scale preparation, but also have excellent fluorescence response to aniline in solutions and gas phase. As the concentration of aniline increased, the fluorescence of films gradually increased at 350 nm, while the fluorescence gradually quenching at 620 nm, and the detection limits (LOD) of aniline in water and air were 0.27 ppb and 0.086 ppb, respectively. In addition, the adsorption performance of the film for aniline has also been confirmed and the maximum adsorption capacity was 32.6 mg/g, which is a strong guarantee for the realization of ultra-trace detection and toxicity reduction of aniline. In summary, the multi-functional film sensor has been designed for ultra-trace detection and efficient removal of aniline in solutions and gas phase, and have significant value for pollutant treatment, ecological restoration and early prevention.

Four series of lanthanide coordination polymers based on the tetrabromobenzene-1,4-dicarboxylate ligand: structural diversity and multifunctional properties

Four series of lanthanide-based coordination polymers (LnCPs), namely [Ln(Br₄bdc)_1.5(MeOH)₃] (1Ln; Ln = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy), [Ln₂(Br₄bdc)₂(NO₃)₂(MeOH)₄] (2Ln; Ln = Ce, Pr, Nd, Sm), [Ln(Br₄bdc)(NO₃)(MeOH)] (3Ln; Ln = Gd, Tb, Dy), and [Ln₂(Br₄bdc)₃(H₂O)_2.3(MeOH)_2.7] (4Ln; Ln = Gd, Tb, Dy) have been synthesized by reacting hydrated lanthanide(III) salts with tetrabromobenzene-1,4-dicarboxylic acid (H₂Br₄bdc) in different solvents under solvothermal conditions. The structural diversity found in the system mainly resulted from the effects of anions, solvents, and the variation in the ionic radii of the lanthanide(III) ions. Compounds in series 1Ln feature a two-dimensional (2D) layered structure with sql topology based on {(Ln(COO)₂)₂(μ-COO)₂} secondary building units (SBUs). Compounds in series 2Ln and 3Ln comprise, respectively, infinite uniform and alternate chains of {Ln(COO)₂}_n SBUs that are assembled into a similar network topology to 1Ln. Meanwhile, compounds in series 4Ln feature 3D coordination networks of a pcu α-Po topological net consisting of binuclear {Ln₂(COO)₃} SBUs. The formation of polymeric networks in series 1Ln-4Ln is facilitated by the numerous coordination sites of the ligand Br₄bdc^2- and the fact that its bromine atoms can participate in the formation of various types of intermolecular interactions. The solid-state photoluminescence studies on Eu- (1Eu) and Tb- (1Tb, 3Tb, 4Tb) containing compounds indicate that the Br₄bdc^2- ligands can efficiently sensitize Eu³⁺ and Tb³⁺ emission. Notably, such compounds exhibit highly sensitive fluorescence sensing for acetone, water, and Fe³⁺ ions via the fluorescence quenching effect. As the representatives of the series, activated 1Eu, 2Pr, 3Tb, and 4Tb show the maximum CO₂ uptake capacities of 170.4, 273.7, 255.3, and 303.5 cm³ g^-1, respectively, at 50 bar and 298 K with good repeatability of the adsorption-desorption properties. Magnetic studies indicate that the Gd- and Dy-based compounds 1Gd, 1Dy, 3Gd, 3Dy, and 4Gd show simple paramagnetic behaviours, whereas compound 4Dy exhibits weak ferromagnetic interactions.

Novel NBN-Embedded Polymers and Their Application as Fluorescent Probes in Fe3+ and Cr3+ Detection

The isosteric replacement of C═C by B–N units in conjugated organic systems has recently attracted tremendous interest due to its desirable optical, electronic and sensory properties. Compared with BN-, NBN- and BNB-doped polycyclic aromatic hydrocarbons, NBN-embedded polymers are poised to expand the diversity and functionality of olefin polymers, but this new class of materials remain underexplored. Herein, a series of polymers with BNB-doped π-system as a pendant group were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization from NBN-containing vinyl monomers, which was prepared via intermolecular dehydration reaction between boronic acid and diamine moieties in one pot. Poly{2-(4-Vinylphenyl)-2,3-dihydro-1H-naphtho[1,8-de][1,3,2]diazaborinine} (P1), poly{N-(4-(1H-naphtho[1,8-de][1,3,2]diazaborinin-2(3H)-yl)phenyl)acrylamide} (P2) and poly{N-(4-(1H-benzo[d][1,3,2]diazaborol-2(3H)-yl)phenyl)acrylamide} (P3) were successfully synthesized. Their structure, photophysical properties and application in metal ion detection were investigated. Three polymers exhibit obvious solvatochromic fluorescence. As fluorescent sensors for the detection of Fe³⁺ and Cr³⁺, P1 and P2 show excellent selectivity and sensitivity. The limit of detection (LOD) achieved by Fe³⁺ is 7.30 nM, and the LOD achieved by Cr³⁺ is 14.69 nM, which indicates the great potential of these NBN-embedded polymers as metal fluorescence sensors.

Wireless Volatile Organic Compound Detection for Restricted Internet of Things Environments Based on Cataluminescence Sensors

Cataluminescence-based sensors do not require external light sources and complex circuitry, which enables them to avoid light scattering with high sensitivity, selectivity, and widely linear range. In this study, a wireless sensor system based on hierarchical CuO microspheres assembled from nano-sheets was constructed for Volatile Organic Compound (VOC) online detection. Through sensor characteristics and data process analysis, the results showed that the luminous sensor system has good luminous characteristics, including the intensity of visible light, high signal/noise (S/N) values, and very short response and recovery times. Different VOC concentration values can be detected on multiple wavelength channels and different Cataluminescence signal spectra separations can process multiple sets of Cataluminescence data combinations concurrently. This study also briefly studied the mechanism action of the Cataluminescence sensor, which can specifically be used for VOC detecting.

Facile fabrication of Tb3+-functionalized COF mixed-matrix membrane as a highly sensitive platform for the sequential detection of oxolinic acid and nitrobenzene

A novel Tb³⁺-functionalized covalent organic framework-based polymer mixed-matrix membrane (Tb³⁺@COF MMM) has been successfully fabricated by incorporating the highly stable Tb³⁺@PI-COF as filler into polyvinylidene fluoride (PVDF) solution. Compared with pure COF membrane, MMM exhibits its good flexibility, processability and high detection sensitivity. The obtained Tb³⁺@COF-MMM (M) can be employed as a highly sensitive sensing platform for the sequential detection of oxolinic acid (OA) and nitrobenzene (NB) based on a "off-on-off" process. M has performed its great selectivity, high sensitivity, and low detection limit for detecting OA with "turn-on" mechanism. Moreover, owing to the good chemical stability and anti-interference of M sensor, it is prospective to efficiently detect residues of OA in serum or river water. After the detection of M-15 toward OA, the obtained fluorescent M-15/OA exhibits the rapid quenching, facile manipulation, cycling utility and low detection limits for sensing NB solution and vapor. This work has proposed a typical case of developing flexible Ln³⁺-functionalized COF-based polymer mixed-matrix membrane as a highly sensitive sensing platform for detecting OA and NB, simultaneously revealed the applied potentiality of M for monitoring animal health and environmental pollution.

Synthesis of a Lanthanide Metal-Organic Framework and Its Fluorescent Detection for Phosphate Group-Based Molecules Such as Adenosine Triphosphate

Adenosine triphosphate (ATP) is an important kind of metabolized biological molecule that is formed in organisms, especially in mitochondria, is used universally as energy, and is one of the most significant multifunctional biological molecules. Metal-organic frameworks (MOFs) have been widely used in many applications such as gas storage and separation, drug delivery, heterogeneous catalysis, chemical sensors, etc. Remarkably, lanthanide MOFs (Ln-MOFs), which display large pores, multiple dimensions, and unique lanthanide luminescence properties, are widely used as chemical sensors. A novel three-dimensional probe, Eu₂(sbdc)₃(H₂O)₃ (Eu-sbdc), was successfully self-assembled with Eu(NO₃)₃·6H₂O and 5,5-dioxo-5H-dibenzo[b,d]thiophene-3,7-dicarboxylic acid (H₂sbdc). The Ln-MOF Eu-sbdc can quickly and effectively optically detect ATP via a luminescent quenching mechanism. The K_sv value of Eu-sbdc is 1.02 × 10⁴ M^-1, and the lower detection limit of Eu-sbdc for ATP is 20 μM, which is more sensitive to ATP. Its mechanism of monitoring ATP might be a dynamic or static quenching process. Eu-sbdc could effectively and quickly recognize ATP with high sensitivity.

In situ ligand-induced Ln-MOFs based on a chromophore moiety: white light emission and turn-on detection of trace antibiotics

Series novel 3D Ln-MOFs containing both carboxyphenyl and pyridinyl moieties have been constructed. Tb-MOF fluorescence turn-on sensor of levofloxacin solution with highly sensitive and excellent selective was achieved through d-PET approach.

A 2-fold interpenetrated zinc–organic framework with Lewis basic triazole sites: luminescence sensing of Fe3+ and Cr2O72−, and warm white-light emission by encapsulated Ln3+ ions

A 2-fold interpenetrated Zn-MOF with Lewis basic triazole sites shows selective luminescence sensing of Fe3+ and Cr2O72− and tunable white-light emission by encapsulated Ln3+ ions.

Structure, magnetic properties and spin density of two alternative Mn(II) coordination polymers based on 1,4-bis(2'-carboxyphenoxy)benzene

Two novel manganese coordination polymers [Mn2(µ2-bcpb)(µ4-bcpb)(2,2’-bipy)2]n (1) and [Mn2(µ3-bcpb)2(2,2’-bipy)2(H2O)]n (2) (H2bcpb=1,4-bis(2’-carboxylato phenoxy)-benzene; 2,2’-bipy=2,2’-bipyridine), have been synthesized successfully from the same reactants but for different filling degrees of Teflon tubes used...

Three novel metal-organic frameworks with different coordination modes for trace detection of anthrax biomarkers

Dipicolinic acid (DPA) is an anthrax biomarker. Its serious consequences make its detection a great need. In this paper, three novel metal-organic frameworks (MOFs) with different coordination modes were synthesized by a simple solvothermal method, which can be used as highly efficient fluorescence sensors for the highly selective and sensitive trace detection of DPA. MOFs 1-3 showed rapid responses to DPA (<30 s), and the limits of detection (LODs) were calculated to be 1.01 × 10^-6 M^-1 (MOF 1), 1.17 × 10^-6 M^-1 (MOF 2) and 2.07 × 10^-6 M^-1 (MOF 3). DPA detection based on MOFs 1-3 in fetal bovine serum is highly reliable based on the high recovery rates (90% to 115%). Hence, the three MOF-based sensors can be used in the real-time detection of DPA.

Fabrication of two-phase Ca2+-doped LaVO4:Eu3+ structures: morphology modification, tunable optical performance and detection of Fe3+ ions with high sensitivity

Two-phase Ca²⁺-doped LaVO₄:Eu³⁺ nanocrystals were prepared through a hydrothermal method with the help of SOD CITR and EDTA surfactants. The phase and morphology of the products were characterized by XRD and TEM, and the fluorescence performances were also recorded. The results indicated that Ca²⁺ ions were doped into the LaVO₄:Eu³⁺ host lattice, impeding the aggregation of the nanocrystals and enhancing the luminescence intensity. The morphology transformation process and luminescence enhancement were systematacially investigated. The fluorescence intensity of the two selected samples could be completely quenched by Fe³⁺ ions without the disturbance of other ions, with the mechanism being due to the adsorption of Fe³⁺ ions onto the grains and a subsequent energy transfer from Eu³⁺ to Fe³⁺. Therefore, the present two Ca²⁺-doped LaVO₄:Eu³⁺ samples can be applied as appropriate candidates for detecting Fe³⁺ ions with agility and sensitivity in aqueous solution.

Tetraphenylpyrazine-Based Manganese Metal-Organic Framework as a Multifunctional Sensor for Cu2+, Cr3+, MnO4-, and 2,4,6-Trinitrophenol and the Construction of a Molecular Logical Gate

A tetraimidazole-decorating tetraphenylpyrazine has been designed and utilized for the fabrication of a novel metal-organic framework (MOF), denoted as {Mn(Tipp)(A)₂}_n·2H₂O (TippMn, where Tipp = 2,3,5,6-tetrakis[4-[(1H-imidazol-1-yl)methyl]phenyl]pyrazine and A = deprotonation of 1,4-naphthalenedicarboxylic acid), through hydrothermal synthesis. Structural analysis reveals that TippMn possesses a 2-fold-interpenetrated 4,8-connected three-dimensional (3D) network with an unprecedented {4¹⁶·6¹²}{4⁴·6²} topology. Fluorescent spectral investigations indicate that TippMn shows discriminative fluorescence when treated by Cr³⁺ and Cu²⁺, giving an INHIBIT logical gate performance. Meanwhile, TippMn can be further used as a sensor for MnO₄^- and 2,4,6-trinitrophenol (TNP) by fluorescence quenching. Notably, the sensing processes toward Cu²⁺, Cr³⁺, MnO₄^-, and TNP are labeled with high selectivity and sensitivity, quick response, and good recyclability. It is anticipated that this MOF-based versatile sensor could shed light on the exploration of MOFs for fluorescent sensors, optical switches, etc.

Tuning Chromophore-Based LMOF Dimensionality to Enhance Detection Sensitivity for Fe3+ Ions

Herein, we report the synthesis of two new manganese-based luminescent metal-organic frameworks (LMOFs) [Mn_0.5(tipe)(1,4-ndc)] _n (1) and [Mn(tipe)(1,4-ndc) (H₂O)·(DMF)₂·(H₂O)₃] _n (2) [tipe = 1,1,2,2-tetrakis(4-(1H-imidazol-1-yl)phenyl)ethene (tipe) and 1,4-ndc = 1,4-naphthalenedicarboxylic acid] constructed from an aggregation-induced emission (AIE) chromophore ligand. Compound 1 can undergo a facile single-crystal-to-single-crystal transformation to form compound 2, which results in an increase in dimensionality from a two-dimensional (2D) network to a three-dimensional (3D) network. Both compounds demonstrate excellent performance for the solution-phase detection of Fe³⁺ ions through a significant and rapid quench in luminescence emission. Fluorescence titration experiments reveal that compound 2 is more selective toward Fe³⁺ compared to compound 1 because of its 3D stacking mode. The K _sv value for compound 2 (32 378 M^-1) is twice as large as that for compound 1 (15 854 M^-1) for the detection of Fe³⁺ ions. We attribute this significant increase in performance to the increase in dimensionality. In addition, compound 2 demonstrates high selectivity and sensitivity for the detection of Cr³⁺ cations and Cr₂O₇ ^2- anions.

A Stable Cd(II)-Based Metal-Organic Framework: Synthesis, Structure, and Its Eu3+ Functionalization for Ratiometric Sensing on the Biomarker 2-(2-Methoxyethoxy) Acetic Acid

A novel two-dimensional Cd-based metal-organic framework (MOF), [Cd(pddb)H₂O]_n (Cd-MOF), has been hydrothermally synthesized using the V-shaped ligand 4,4'-(pyridine-2,6-diyl)-dibenzoic acid (H₂pddb) and structurally characterized. The framework exhibits fascinating one-dimensional in-plane channels functionalized with active pyridine-N sites. The as-synthesized Cd-MOF exhibits excellent water and chemical stability. Furthermore, a simple and nondestructive coordinated postsynthetic modification method has been applied to Cd-MOF to obtain a class of MOF hybrids functionalized by lanthanide ions. More interestingly, Eu³⁺@Cd-MOF can act as a dual-emissive ratiometric fluorescent probe for 2-(2-methoxyethoxy) acetic acid (MEAA), a metabolite of 2-(2-methoxyethoxy) ethanol, which could result in DNA damage and teratogenic and developmental toxicity. During the sensing process, the fluorescence sensor exhibits notable water tolerance, reusability, and a low detection limit (8.5 μg mL^-1). In addition, the chemical substances in human urine and serum do not interfere with the fluorescence quenching process, which makes it possible for the fluorescent probe to be applied in the detection of MEAA in human urine and serum systems. The possible sensing mechanism is also studied and discussed in detail.

A versatile logic detector and fluorescent film based on Eu-based MOF for swift detection of formaldehyde in solutions and gas phase

Due to the huge threat of formaldehyde (FA) on human beings, the development of chemical sensors for swift detection of FA in solutions and gas phase is highly anticipated. In this paper, a versatile logic detector and a portable fluorescent film based on small-scaled Eu-based MOF were applied successfully to detect FA in solutions and gas phase, respectively. For FA in aqueous solution, the design of logic detector will efficiently identify FA in different concentration ranges: when the FA concentration are 0-500 ppb, 500-1000 ppb and >1000 ppb, the output signals of logic detector are the concentration level of FA ("L", "H" and "VH"), and accompanied by red, purple and blue signal lamps to remind, respectively. For FA in the air, the color of rigid film sensor will gradually change from red to blue with the increase of FA under UV lamp, and the detection limit of gaseous FA is 11.8 ppb. Through the preparation of logic devices and fluorescent films, Eu-based MOF realized swift detection of FA in solutions and gas phase, which will be very helpful to improve the human response level to FA from different emission sources.

Selective fluorescent sensing of LMOFs constructed from tri(4-pyridylphenyl)amine ligand

Three new luminescent metal-organic frameworks (LMOFs), [Zn(tppa)(ndc)] _n (1), [Cd(tppa)(oba)] _n (2), [Zn₂(tppa)(bpdc)₂] _n (3) (tppa = tri(4-pyridylphenyl)amine, ndc = 1,4-naphthalenedicarboxylic acid, oba = 4,4'-oxydibenzoic acid, bpdc = 4,4'-biphenyldicarboxylic acid) have been synthesized by solvothermal method. Complexes 1 and 2 are 2-D two-fold interpenetrating structures, aligning into a 3-D structure through C-H⋯π stacking interactions, while 3 is a 5-fold interpenetrating three-dimensional structure. The internal quantum yields (IQYs) of complexes 1-3 are 32.7%, 45.7% and 24.0% (λ _ex = 365 nm), separately. Furthermore, all the complexes show different luminescence signal changes towards aromatic volatile organic compounds (AVOCs). Complex 1 exhibits a high sensitivity in the detection of both Fe³⁺ and Cr³⁺ with large quenching coefficients of K _sv 2.57 × 10⁴ M^-1 and 2.96 × 10⁴ M^-1, respectively. All these results demonstrated potential applications in chemical sensing.

A donor-π-acceptor aggregation-induced emission compound serving as a portable fluorescent sensor for detection and differentiation of methanol and ethanol in the gas phase

The design strategy of aggregation-induced emission (AIE) fluorophores with donor-π-acceptor (D-π-A) conjugation structure has greatly contributed to the development of luminescent materials and devices, including volatile organic compounds (VOCs) sensors. In this work, a D-π-A fluorophore DEBAB was synthesized, showing both AIE and intramolecular charge transfer (ICT) properties as confirmed by spectroscopic data and quantum chemical calculations. Furthermore, there is notable emission-enhancement when DEBAB is exposed to small-molecule alcohols, such as methanol and ethanol. Based on this phenomenon, a portable film sensor was fabricated, capable of detecting methanol and ethanol in gas phase, with detection limit (DL) as low as 8.02 ppm. Our systematic investigation suggests that hydrogen-bonding may be formed between DEBAB and alcohols, intensifying the AIE efficacy while influencing the ICT process. This working mechanism is supported by density functional theory (DFT) calculations including electrostatic potential mapping and molecular total energy. In addition, a sensor array was fabricated on a cellulose paper strip, showing different levels of emission changing in response to alcohols. Thus the detection and differentiation of methanol and ethanol are enabled.