A Comparison of Gallium and Indium Alkoxide Complexes as Catalysts for Ring-Opening Polymerization of Lactide

Epoxide/CO2 Cycloaddition Reaction Catalyzed by Indium Chloride Complexes Supported by Constrained Inden Schiff-Base Ligands

Cyclic carbonates have received significant interests for uses as reagents, solvents, and monomers. The coupling reaction of epoxides with carbon dioxide (CO2 ) to produce cyclic carbonate is an attractive route which can significantly reduce greenhouse gas emissions and environmental hazards. Herein, a series of five indium chloride complexes supported by inden Schiff-base ligands were reported along with four X-ray crystal structures. The constrained five-membered rings were added to the ligands to enhance the coordination of epoxides to the In metal. From the catalyst screening, In inden complex having tert-butyl substituents and propylene backbone in combination with tetrabutylammonium bromide (TBAB) exhibited the highest catalytic activity (TON up to 1017) for propylene oxide/CO2 coupling reaction with >99 % selectivity for cyclic carbonate under solvent-free conditions. In addition, the catalyst was shown to be active at atmospheric pressure of CO2 at room temperature. The catalyst system can be applied to various internal and terminal epoxide substrates to exclusively produce the corresponding cyclic carbonates.

Metal Complexes in the Synthesis of Biodegradable Polymers: Achievements and Prospects

This review describes recent advances in the synthesis of homopolymers of lactide and related cyclic esters via ring-opening polymerization (ROP) in the presence of metal complexes based on group 1, 2, 4, 12, 13 and 14 metals. Particular attention is paid to the influence of the initiator structure on the properties of the obtaining homo- and copolymers. Also, a separate chapter is devoted to the study of metal complexes in the synthesis of copolymers of lactide and lactones. This review highlights the efforts made over the last ten years or so, and shows how main-group metals have received increasing attention in the field of the polymerization of lactide and related cyclic esters.

Group 13 salphen compounds (In, Ga and Al): a comparison of their structural features and activities as catalysts for cyclic carbonate synthesis

Many complexes based on group 13 elements have been successfully applied as catalysts for the synthesis of cyclic carbonates from epoxides and CO₂ and to date these have provided some of the most active catalysts developed. It is notable that most reports have focused on the use of aluminium-based compounds likely because of the well-established Lewis acidity of this element and its cost. In comparison, relatively little attention has been paid to the development of catalysts based on the heavier group 13 elements, despite their known Lewis acidic properties. This study describes the synthesis of aluminium, gallium and indium compounds supported by a readily prepared salphen ligand and explores both their comparative structures and also their potential as catalysts for the synthesis of cyclic carbonates. In addition, the halide ligand which forms a key part of the compound has been systematically varied and the effect of this change on the structure and catalytic activity is also discussed. It is demonstrated that the indium compounds are actually, and unexpectedly, the most active for cyclic carbonate synthesis, despite their lower Lewis acidity when compared to their aluminium congeners. The experimental observations from this work are fully supported by a Density Functional Theory (DFT) study, which provides important insights into the reasons as to why the indium catalyst with bromide, [InBr(salphen)], is most active.

Gallium (III) Complexes Based on Aminobisphenolate Ligands: Extremely High Active ROP-Initiators from Well-Known and Easily Accessible Compounds

We report herein the synthesis and full characterizations of the first examples of gallium complexes based on "privileged" aminobisphenolate ligands which are easily available. These complexes turned out to be extremely active in the ring-opening polymerization of ε-caprolactone even at room temperature and highly active in the ROP of L-lactide. The combination of factors such as the easy availability of these compounds and the supposedly low toxicity, together with the extremely high activity in ROP, allows us to consider these compounds as suitable for use on an industrial scale for the synthesis of biodegradable polymers for biomedical applications.

Comparison of Imine- and Phosphinimine-Supported Indium Complexes: Tuning the Reactivity for the Sequential and Simultaneous Copolymerization of Lactide and ε-Caprolactone

Imine- and phosphinimine-supported indium complexes were used as catalysts in the polymerization of racemic lactide and ε-caprolactone as well as their copolymerization by the sequential and simultaneous addition of monomers. Tuning the electronics and sterics of the indium centers by either (i) changing the nature of the nitrogen donors and (ii) coordinating a hemilabile side group had a significant effect on the reactivity of the complexes, their stability, and their control in the synthesis of block copolymers. Specifically, the imine-supported complex (5) showed the highest activity in the homo- and copolymerization of the cyclic esters, in contrast to the phosphinimine-supported complex (7), which was significantly slower and less stable. The presence of morpholine and thiomorpholine hemilabile side groups either reduced the activity or prevented the formation of alkoxide complexes.

Temperature triggered alternating copolymerization of epoxides and lactones via pre-sequenced spiroorthoester intermediates

We report the alternating copolymerization of caprolactone and epoxide through the in situ formation of pre-sequenced spiroorthoester monomer. The reaction is catalyzed by the temperature triggered, bifunctional cationic indium complex (±)-[(NN_iO_tBu)In(CH₂SiMe₃)][B(C₆F₅)₄] (1). 1 can catalyze the coupling of epoxide and lactone to form spiroorthoester at 60 °C and its double ring-opening polymerization at 110 °C to form poly(ether-alt-ester). The post-polymerization modification and degradation of the poly(ether-alt-ester) are further investigated.

We report the alternating copolymerization of caprolactone and epoxide through the in situ formation of pre-sequenced spiroorthoester monomer.

Use of group 13 aryloxides for the synthesis of green chemicals and oxide materials

In this work, group 13 metal aryloxides [Al(MesalO)3] (1), [Me2Ga(MesalO)]2 (2), [AlLi3(MesalO)6] (3) and [Me2GaLi(MesalO)2(THF)] (4), were obtained by reaction of methyl salicylate (MesalOH) with group-13 alkyls MMe3 (for M...

Synthesis and characterization of group 13 dichloride (M = Ga, In), dimethyl (M = Al) and cationic methyl aluminum complexes supported by monoanionic NNN-pincer ligands

A series of monoanionic NNN-pincer ligands effectively stabilize five-coordinate gallium and indium dichloride complexes, as well as neutral dimethyl aluminum species, and organometallic cations thereof.

Cationic aluminum, gallium, and indium complexes in catalysis

The introduction of cationic charge allows cationic group 13 complexes to be excellent Lewis acid catalysts. Cationic aluminum, gallium, and indium complexes in catalysis are comprehensively reviewed based on the reaction type.

Synthesis, structures, and catalytic efficiency in ring opening polymerization of rac-lactide with tridentate vs. bidentate cobalt(ii), zinc(ii), and cadmium(ii) complexes containing N-substituted N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amine ligands

A series of Co(ii), Zn(ii), and Cd(ii) complexes supported by 1-(3,5-dimethyl-1H-pyrazol-1-yl)-N-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-N-(furan-2-ylmethyl)methanamine (L_A) and N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-isopropylaniline (L_B) were synthesized. The direct chelation of CoCl₂·6H₂O, ZnCl₂, and CdBr₂·4H₂O by the ligands produced [L_nMX₂] (L_n = L_A or L_B; M = Zn or Co, with X = Cl; M = Cd, with X = Br) complexes in high yields. Structural studies revealed that [L_BCoCl₂] and [L_BZnCl₂] adopted distorted tetrahedral geometries, as L_B coordinated the metal centers in a bidentate fashion, while L_A coordinated the metal centers in a tridentate fashion through the nitrogen atoms of the pyrazole and amine moieties, so that [L_ACoCl₂] and [L_AZnCl₂] exhibited trigonal bipyramidal geometries and [L_ACdBr₂] a square pyramidal geometry. [L_BCdBr₂] has two Cd-containing structures per unit cell, whereby one Cd center adopted a distorted tetrahedral geometry and the other exhibited square bipyramidal geometry. The in situ-generated alkyl derivatives of the synthesized complexes were assessed in the ring-opening polymerization of rac-lactide. Heterotactic polylactides (PLAs) were furnished with all complexes. The [L_BZnCl₂]/MeLi system produced PLA with a superior heterotactic bias (P_r up to 0.94) at −25 °C. PLAs with wide-ranging polydispersity indices (1.16–2.23) and low molecular weights were produced in all cases, irrespective of the specific M(II) center and ancillary ligand utilized.

Co(ii), Zn(ii), and Cd(ii) complexes supported by bis-pyrazolyl ligands were applied to the ring-opening polymerization of rac-lactide to produce heterotactic polylactides (PLAs) with superior heterotactic bias i.e. P_r up to 0.94 at −25 °C.

Conversion of dilute CO2 to cyclic carbonates at sub-atmospheric pressures by a simple indium catalyst

A simple indium halide with an ammonium salt catalyst can catalyze effectively the cycloaddition of epoxide and dilute CO₂. A detailed mechanistic investigation is conducted using kinetics, isotope labeling, and in situ NMR and IR experiments.

Alkaline-earth complexes with macrocyclic-functionalised bis(phenolate)s and bis(fluoroalkoxide)s

The synthesis and structural features of several families of unsolvated molecular complexes of the heavy alkaline earths (Ae = calcium, strontium and barium) supported by bis(phenolate)s or bis(fluoroalkoxide)s are described. These dianionic, multidentate ligands are built around diaza-macrocycles that contain either five or six N- and O-heteroatoms. Several of these complexes have been characterised by X-ray diffraction crystallography. A list of comparative features was drawn upon close examination of the molecular structures of these complexes. It highlights the subtle influences of the identity of the central Ae metal, denticity and nature -fluoroalkoxide vs. phenolate- of the anionic tethers in the ligands. All complexes are seven- or eight-coordinate. It is observed in particular that a decrease of the number of heteroatoms in the macrocyclic backbone of the ligand will be compensated by the establishment of intramolecular AeF interactions (accounting for ca. 3.8-6.4% of the pertaining coordination spheres according to bond valence sum analysis), dimerisation of the complex, or, in one case, solvent (thf) retention. Attempts to gauge the Lewis acidity in these series of complexes were carried out by three independent methods (Childs, Gutmann-Beckett and global electrophilicity index). However, conflicting results were obtained and no clear trend can be delineated, even if on the whole, these measurements concur to suggest relatively low Lewis acidity.

Synthesis of Biodegradable Polymers: A Review on the Use of Schiff-Base Metal Complexes as Catalysts for the Ring Opening Polymerization (ROP) of Cyclic Esters

This review describes the recent advances (from 2008 onwards) in the use of Schiff-base metal complexes as catalysts for the ring opening polymerization (ROP) of cyclic esters. The synthesis and structure of the metal complexes, as well as all aspects concerning the polymerization process and the characteristics of the polymers formed, will be discussed.

Synthesis and structures of mono- and di-nuclear aluminium and zinc complexes bearing α-diimine and related ligands, and their use in the ring opening polymerization of cyclic esters

Multi-metallic complexes (of Al, Zn) derived from imine-based ligands effectively operate as catalysts for the ring opening polymerization (ROP) of ε-caprolactone (ε-CL), δ-valerolactone (δ-VL) and co-polymerization thereof.

Cationic indium complexes for the copolymerization of functionalized epoxides with cyclic ethers and lactide

We report the first example of discrete cationic indium complexes for the copolymerization of epoxides, cyclic ethers, and lactide. [SalenIn][SbF6] in particular proved to be a highly active catalyst for the homo-polymerization of functionalized epoxides and their copolymerization with other cyclic ethers THF, oxetane and oxepane. This catalyst also proved competent in the polymerization of epichlorohydrin and lactide, forming copolymers with good activity and control. Investigation of the role of counteranions and solvent donors on the kinetics of polymerization of epoxides revealed a subtle effect of solvents on initiation rates.

Highly efficient metal(iii) porphyrin and salen complexes for the polymerization of rac-lactide under ambient conditions

Metal(iii) complexes supported by porphyrin and salen ligands were highly efficient for rac-lactide polymerization at room temperature giving isotactic-enriched PLA.

Salen complexes of zirconium and hafnium: synthesis, structural characterization and polymerization studies

Salen complexes of zirconium and hafnium were synthesized and used as effective catalysts for the polymerization of lactide and ε-CL and homopolymerization, copolymerization and coupling of epoxides with CO₂.

Recent progress in the application of group 1, 2 & 13 metal complexes as catalysts for the ring opening polymerization of cyclic esters

This review focuses on recent developments concerned with the use of well-defined main group complexes as (pre-)catalysts for the ROP of cyclic esters to give aliphatic polyesters; factors influencing catalytic activity, selectivity and polymer properties are all discussed.

Design of hybrid molecular brushes with reversible surface adaptability on exposure to specific solvents

Hybrid molecular brushes (HMBs) are macromolecules made of a linear backbone and polymeric side chains that differ in their chemical nature. The authors developed a new method of synthesis of HMB with chitosan (CHI) backbone. In the first step, chitosan-graft-polylactide (CHI-g-PLA) was synthesized by interfacial ring opening polymerization of lactide initiated from CHI. CHI-g-PLA is characterized for its molecular weight and structure. In the second step, polyvinylpyrrolidone (PNVP) or polyacrylamide (PAAm) is grafted by radical polymerization from the CHI in CHI-g-PLA to form CHI-g-PLA-g-PNVP and CHI-g-PLA-g-PAAm. This results in the formation of HMB, with hydrophobic PLA and hydrophilic PNVP or PAAm side chains grafted to CHI. The chemical structure and thermal behavior of the HMBs are characterized. The morphology of CHI-g-PLA as well as the HMBs is determined using atomic force microscopy (AFM). Both the HMBs tethered to separate surfaces exhibit reversible switching between the hydrophilic and hydrophobic polymers on exposure to specific solvents. This is studied by AFM and water contact angle measurements. Hence, the authors developed a method for synthesis of HMB that can be applied for surface modification.

Indium Catalysts for Low-Pressure CO2/Epoxide Ring-Opening Copolymerization: Evidence for a Mononuclear Mechanism?

The alternating copolymerization of CO₂/epoxides is a useful means to incorporate high levels of carbon dioxide into polymers. The reaction is generally proposed to occur by bimetallic or bicomponent pathways. Here, the first indium catalysts are presented, which are proposed to operate by a distinct mononuclear pathway. The most active and selective catalysts are phosphasalen complexes, which feature ligands comprising two iminophosphoranes linked to sterically hindered ortho-phenolates. The catalysts are active at 1 bar pressure of carbon dioxide and are most effective without any cocatalyst. They show low-pressure activity (1 bar pressure) and yield polymer with high carbonate linkage selectivity (>99%) and isoselectivity ( P_m > 70%). Using these complexes, it is also possible to isolate and characterize key catalytic intermediates, including the propagating indium alkoxide and carbonate complexes that are rarely studied. The catalysts are mononuclear under polymerization conditions, and the key intermediates show different coordination geometries: the alkoxide complex is pentacoordinate, while the carbonate is hexacoordinate. Kinetic analyses reveal a first-order dependence on catalyst concentration and are zero-order in carbon dioxide pressure; these findings together with in situ spectroscopic studies underpin the mononuclear pathway. More generally, this research highlights the future opportunity for other homogeneous catalysts, featuring larger ionic radius metals and new ligands, to operate by mononuclear mechanisms.

Preparation of multiblock copolymers via step-wise addition of l-lactide and trimethylene carbonate

The synthesis of up to pentablock copolymers from various combinations of l-lactide and trimethylene carbonate was accomplished using a dinuclear zinc complex, and the physical, thermal, and mechanical properties of the resulting copolymers evaluated.

Poly(l-lactide) (PLA) is a bioderived and biodegradable polymer that has limited applications due to its hard and brittle nature. Incorporation of 1,3-trimethylene carbonate into PLA, in a block copolymer fashion, improves the mechanical properties, while retaining the biodegradability of the polymer, and broadens its range of applications. However, the preparation of 1,3-trimethylene carbonate (TMC)/l-lactide (LA) copolymers beyond diblock and triblock structures has not been reported, with explanations focusing mostly on thermodynamic reasons that impede the copolymerization of TMC after lactide. We discuss the preparation of multiblock copolymers via the ring opening polymerization (ROP) of LA and TMC, in a step-wise addition, by a ferrocene-chelating heteroscorpionate zinc complex, {[fc(PPh₂)(BH[(3,5-Me)₂pz]₂)]Zn(μ-OCH₂Ph)}₂ ([(fc^P,B)Zn(μ-OCH₂Ph)]₂, fc = 1,1′-ferrocenediyl, pz = pyrazole). The synthesis of up to pentablock copolymers, from various combinations of LA and TMC, was accomplished and the physical, thermal, and mechanical properties of the resulting copolymers evaluated.

Low valent Al(ii)–Al(ii) catalysts as highly active ε-caprolactone polymerization catalysts: indication of metal cooperativity through DFT studies

A dinuclear Al(ii)–Al(ii) species acts as a highly effective ROP catalyst of ε-caprolactone at room temperature, with a DFT computed ROP mechanism indicative of metal cooperativity.

Indium Catalysts for Ring Opening Polymerization: Exploring the Importance of Catalyst Aggregation

Inexorably, the environmental persistence and damage caused by polyolefins have become major drawbacks to their continued long-term use. Global shifts in thinking from fossil-fuel to renewable biobased resources have urged researchers to focus their attention on substituting fossil-fuel based polymers with renewable and biodegradable alternatives on an industrial scale. The recent development of biodegradable polyesters from ring opening polymerization (ROP) of bioderived cyclic ester monomers has emerged as a promising new avenue toward this goal. Ever increasing numbers of metal-based initiators have been reported in the literature for the controlled ROP of cyclic esters, in particular for the polymerization of lactide to produce poly(lactic acid) (PLA). PLA has several material weaknesses, which hinder its use as a replacement for commodity plastics. Despite many advances in developing highly active and controlled catalysts for lactide polymerization, no single catalyst system has emerged to replace industrially used catalysts and provide access to PLA materials with improved properties. We reported the first example of indium(III) for the ring opening polymerization of lactide. Since then, indium(III) has emerged as a useful Lewis acid in initiators for the controlled polymerization of lactide and other cyclic esters. In particular, we have developed a large family of chiral dinuclear indium complexes bearing tridentate diaminophenolate ligands and tetradentate salen and salan ligands. Complexes within our tridentate ligand family are highly active initiators for the moderately isoselective living and immortal polymerization of rac-lactide, as well as other cyclic esters. We have shown that subtle steric effects influence aggregation in these systems, with polymerization typically proceeding through a dinuclear propagating species. In addition, profound effects on polymerization activities have been observed for central tertiary versus secondary amine donors in these and other related systems. In contrast, our well-controlled and highly active chiral indium salen systems are more isoselective than the tridentate analogues and polymerize lactide via a mononuclear propagating species. Again, we have noticed that subtle steric and electronic changes to the ligand can influence both polymerization activity and stereoselectivity via aggregation phenomena. Recently, we have reported a promising new chiral indium catalyst supported by a tetradentate salan ligand. This catalyst is remarkably water and air stable and can be activated by linear and branched alcohols to provide controlled access to multiblock copolymers in air. This catalyst represents an important step forward toward generating new, commercially relevant catalysts for ROP of cyclic esters to produce novel biodegradable polymers, and highlights the unique value of indium-based catalysts in the field.

Mononuclear salen-gallium complexes for iso-selective ring-opening polymerization (ROP) of rac-lactide

Mononuclear salen-supported Ga amido and alkoxide complexes, structurally characterized herein, mediate the controlled and iso-selective polymerization ofrac-lactide.

Aluminium complexes containing salicylbenzothiazole ligands and their application in the ring-opening polymerisation of rac-lactide and ε-caprolactone

This paper is the first report on the use of aluminium salicylbenzothiazole complexes for the ROP of rac-LA and ε-CL.