Low-Cost and Facile Synthesis of the Vanadium Oxides V2O3, VO2, and V2O5 and Their Magnetic, Thermochromic and Electrochromic Properties

Exploring the Optical and Energetic Properties of a Co(II)-Based Mixed Ligand MOF

Due to their remarkable properties, including remarkable porosity and extensive surface area, metal-organic frameworks (MOFs) are being investigated for various applications. Herein, we report the first Co(II)-based mixed ligand MOF, formulated Co4(HTrz)2(d-cam)2.5(μ-OH)3. Its 3D structure framework is composed of helical chains {[Co4(μ3-HTrz)4]8+}n connected by d-camphorate ligand building blocks and featured as an extended structure in an AB-AB fashion. The investigated compound displays a wide absorption range across the visible spectrum, characterized by an optical gap energy of 3.7 eV, indicating its semiconducting nature and efficient sunlight absorption capabilities across various wavelengths. The electrochemical performance demonstrated an excellent reversibility, cyclability, structural stability, as well as a specific capacity of up to 100 cycles at a scan rate of 0.1 mV·s-1 and a current density of 50 mA·g-1. Thus, it showcases its ability to retain the capacity over numerous charge-discharge cycles. Additionally, the investigated sample displayed an impressive rate capability during the Li-ion charge/discharge process. Therefore, the material's remarkable electrochemical properties can be ascribed to the synergistic effects of its large specific surface area of 348.294 m2·g-1 and well-defined pore size distribution of 20.448 Å, making it a promising candidate for high-performance Li-ion batteries.

Silver Nanowire-Based Transparent Electrodes for V2O5 Thin Films with Electrochromic Properties

The development of electrochromic systems, known for the modulation of their optical properties under an applied voltage, depends on the replacement of the state-of-the-art ITO (In2O3:Sn) transparent electrode (TE) as well as the improvement of electrochromic films. This study presents an innovative ITO-free electrochromic film architecture utilizing oxide-coated silver nanowire (AgNW) networks as a TE and V2O5 as an electrochromic oxide layer. The TE was prepared by simple spray deposition of AgNWs that allowed for tuning different densities of the network and hence the resistance and transparency of the film. The conformal oxide coating (SnO2 or ZnO) on AgNWs was deposited by atmospheric-pressure spatial atomic layer deposition, an open-air fast and scalable process yielding a highly stable electrode. V2O5 thin films were then deposited by radio frequency magnetron sputtering on the AgNW-based TE. Independent of the oxide's nature, a 20 nm protective layer thickness was insufficient to prevent the deterioration of the AgNW network during V2O5 deposition. On the contrary, crystalline V2O5 films were grown on 30 nm thick ZnO or SnO2-coated AgNWs, exhibiting a typical orange color. Electrochromic characterization demonstrated that only V2O5 films deposited on 30 nm thick SnO2-coated AgNW showed characteristic oxidation-reduction peaks in the Li+-based liquid electrolyte associated with a reversible orange-to-blue color switch for at least 500 cycles. The electrochromic key properties of AgNW/SnO2 (30 nm)/V2O5 films are discussed in terms of structural and morphological changes due to the AgNW network and the nature and thickness of the two protective oxide coatings.

Fast and Stable Zinc Anode-Based Electrochromic Displays Enabled by Bimetallically Doped Vanadate and Aqueous Zn2+/Na+ Hybrid Electrolytes

Vanadates are a class of the most promising electrochromic materials for displays as their multicolor characteristics. However, the slow switching times and vanadate dissolution issues of recently reported vanadates significantly hinder their diverse practical applications. Herein, novel strategies are developed to design electrochemically stable vanadates having rapid switching times. We show that the interlayer spacing is greatly broadened by introducing sodium and lanthanum ions into V3O8 interlayers, which facilitates the transportation of cations and enhances the electrochemical kinetics. In addition, a hybrid Zn2+/Na+ electrolyte is designed to inhibit vanadate dissolution while significantly accelerating electrochemical kinetics. As a result, our electrochromic displays yield the most rapid switching times in comparison with any reported Zn-vanadate electrochromic displays. It is envisioned that stable vanadate-based electrochromic displays having video speed switching are appearing on the near horizon.

Construction of self-assembled bilayer core-shell V2O3 microspheres as absorber with superior microwave absorption performance

The design and preparation of heterogeneous structures of dielectric materials has been the mainstream direction for the construction of superior microwave absorption materials (MAMs). We report a facile and efficient procedure combination of hydrothermal process and subsequent heat treatment for successfully prepared bilayer core-shell structure self-assembled V₂O₃ microspheres (BCSV). The microstructure, defects, dielectric properties and microwave absorption (MA) properties of BCSV were systematically investigated, and the effect of bilayer core-shell structure on the MA properties was discussed. By varying the heat treatment temperature, it is feasible to regulate the thickness of V₂O₃ bilayer and its unique structure defects, hence enhancing the attenuation and multiple polarization loss of electromagnetic waves inside the microspheres. Self-assembled V₂O₃ microspheres with bilayer core-shell structure exhibit high-performance MA property. The reflection loss (RL) gets to - 67.12 dB at 11.69 GHz covering the whole X-band after heat treatment at 600 °C, and the broad effective absorption bandwidth is 5.49 GHz with a thickness of 2.20 mm. The conductivity loss, multiple polarization loss and dielectric loss are ascribed to the specific bilayer core-shell structure. Thus, our work provides a good perspective on how to create vanadium oxide-based MAMs with effective absorption and broad bandwidth.

Voltage-Modulated Untwist Deformations and Multispectral Optical Effects from Ion Intercalation into Chiral Ceramic Nanoparticles

Reconfiguration of chiral ceramic nanostructures after ion intercalation should favor specific nanoscale twists leading to strong chiroptical effects.  In this work, V₂ O₃ nanoparticles are shown to have "built-in" chiral distortions caused by binding of tartaric acid enantiomers to the nanoparticle surface. As evidenced by spectroscopy/microscopy techniques and calculations of nanoscale chirality measures, the intercalation of Zn²⁺ ions into the V₂ O₃ lattice results in particle expansion, untwist deformations, and chirality reduction. Coherent deformations in the particle ensemble manifest as changes in sign and positions of circular polarization bands at ultraviolet, visible, mid-infrared (IR), near-IR (NIR), and IR wavelengths. The g-factors observed for IR and NIR spectral diapasons are ≈100-400 times higher than those for previously reported dielectric, semiconductor, and plasmonic nanoparticles. Nanocomposite films layer-by-layer assembled (LBL) from V₂ O₃ nanoparticles reveal cyclic-voltage-driven modulation of optical activity. Device prototypes for IR and NIR range problematic for liquid crystals and other organic materials are demonstrated. High optical activity, synthetic simplicity, sustainable processability, and environmental robustness of the chiral LBL nanocomposites provide a versatile platform for photonic devices. Similar reconfigurations of particle shapes are expected for multiple chiral ceramic nanostructures, leading to unique optical, electrical, and magnetic properties.

Vanadium Oxide: Phase Diagrams, Structures, Synthesis, and Applications

Vanadium oxides with multioxidation states and various crystalline structures offer unique electrical, optical, optoelectronic and magnetic properties, which could be manipulated for various applications. For the past 30 years, significant efforts have been made to study the fundamental science and explore the potential for vanadium oxide materials in ion batteries, water splitting, smart windows, supercapacitors, sensors, and so on. This review focuses on the most recent progress in synthesis methods and applications of some thermodynamically stable and metastable vanadium oxides, including but not limited to V₂O₃, V₃O₅, VO₂, V₃O₇, V₂O₅, V₂O₂, V₆O₁₃, and V₄O₉. We begin with a tutorial on the phase diagram of the V-O system. The second part is a detailed review covering the crystal structure, the synthesis protocols, and the applications of each vanadium oxide, especially in batteries, catalysts, smart windows, and supercapacitors. We conclude with a brief perspective on how material and device improvements can address current deficiencies. This comprehensive review could accelerate the development of novel vanadium oxide structures in related applications.

Ultrafast, Stable Electrochromics Enabled by Hierarchical Assembly of V2O5@C Microrod Network

Vanadium pentoxide (V₂O₅) with multicolor transition is widely studied in the electrochromic (EC) field to enrich color species of transition-metal oxides; yet, it always suffers from slow switching speed caused by poor electron conductivity and slow ion diffusion, poor cycling stability induced by large volume change during the EC reaction process. Herein, hierarchical network assembly of V₂O₅@C microrods is introduced to develop an ultrafast, stable, multicolor EC film. Using a two-step pyrolysis that involves metal-organic framework templates, porous microrods with a well-preserved one-dimensional structure are prepared through the assembly of V₂O₅@C nanocrystals at nanoscale, providing more active sites for ionic insertion and accessible pathways for electron transport. After spray-coating the V₂O₅@C microrods on conductive substrates, interconnected networks composed of V₂O₅@C microrods at microscale ensures the infiltration of electrolyte and provide ion transport channels. In addition, the nanoscale porous structure and coated carbon layer can accommodate volumetric changes during ion insertion/extraction process, ensuring high electrochemical stability. As a result, EC electrode with V₂O₅@C microrods network performed rapid switching speed (1.1/1.0 s) and stable cycle ability (96% after 2000 cycles). At last, flexible large-scale devices and multicolor digital displays were assembled to demonstrate potential application in next-generation wearable electronics.

Electrochemical Actuators with Multicolor Changes and Multidirectional Actuation

Electrochemical (EC) actuators have garnered significant attention in recent years, yet there are still some critical challenges to limit their application range, such as responsive time, multifunctionality, and actuating direction. Herein, an EC actuator with a back-to-back structure is fabricated by stacking two membranes with bilayer V₂ O₅ nanowires/single-walled carbon nanotubes (V₂ O₅ NWs/SWCNTs) networks, and shows a synchronous high actuation amplitude (about ±9.7 mm, ±28.4°) and multiple color changes. In this back-to-back structure, the inactive SWCNTs layer is used as a conductive current collector, and the bilayer network is attached to a porous polymer membrane. The dual-responsive processes of V₂ O₅ nanowires (V₂ O₅ NWs) actuation films and actuators are also deeply investigated through in situ EC X-ray diffraction and Raman spectroscopy. The results show that the EC actuation of the V₂ O₅ NWs/SWCNTs film is highly related to the redox behavior of the pseudocapacitive V₂ O₅ NWs layer. At last, both V₂ O₅ NWs and W₁₈ O₄₉ nanowires (W₁₈ O₄₉ NWs)-based EC actuators are constructed to demonstrate the multicolor changes and multidirectional actuation induced by the opposite lattice changes of V₂ O₅ NWs and W₁₈ O₄₉ NWs during ionic de-/intercalation, guiding the design of multifunctional EC actuators in the future.

Analysis of Hydrometallurgical Methods for Obtaining Vanadium Concentrates from the Waste by Chemical Production of Vanadium Pentoxide

The paper describes hydrometallurgical methods to recycle wastes of vanadium pentoxide chemical fabrication. Sludges containing a significant amount of V₂O₅ can be considered as an additional source of raw materials for vanadium production. We studied the one-stage leaching method using various iron-based reductants for converting V⁵⁺ to V⁴⁺ in a solution allowing to precipitate V when its concentration in the solution is low. As a result of the reduction leaching with further precipitation, we obtained concentrates with V₂O₅ content of 22–26% and a high amount of harmful impurities. Multistage counterflow leaching can be used to fabricate solutions with vanadium pentoxide concentration suitable for vanadium precipitation by hydrolysis and adding ammonium salts. The solutions with V₂O₅ content of ≈15 g/L can be obtained from the initial sludge by three-stage counterflow vanadium leaching. A concentrate with a content of 78 wt% V₂O₅ can be precipitated from these solutions at pH = 2.4 by adding ammonium chloride. Additionally, concentrate with V₂O₅ content of ≈94 wt% was precipitated from the solution with a concentration of >20 g/L V₂O₅ obtained from the roasted sludge. The concentrates were purified for increasing the vanadium content to 5–7%. The consumption and technological parameters of the considered processes are presented in the paper.

Synthesis and Characterization of Micro/Nanoscale VO2(M) through Vanadylethylene Glycolate Decomposition

Thanks to a homemade dynamic vacuum system, fully crystallized VO₂ (M) is successfully synthesized in a merged step of vanadyl ethylene glycolate (VEG) decomposition and crystallization of VO₂ at high temperatures (>500 °C). During the whole process, vanadium valence (+4) is well maintained, and VEG microstructure plays an important role in the end-product size and shape. Finally, the suggested route appears well suitable for the mass production of VO₂ nanoparticles.

Systematic Exploration of the Synthetic Parameters for the Production of Dynamic VO2(M1)

Thermochromic dynamic cool materials present a reversible change of their properties wherein by increasing the temperature, the reflectance, conductivity, and transmittance change due to a reversible crystalline phase transition. In particular, vanadium (IV) dioxide shows a reversible phase transition, accompanied by a change in optical properties, from monoclinic VO₂(M1) to tetragonal VO₂(R). In this paper, we report on a systematic exploration of the parameters for the synthesis of vanadium dioxide VO₂(M1) via an easy, sustainable, reproducible, fast, scalable, and low-cost hydrothermal route without hazardous chemicals, followed by an annealing treatment. The metastable phase VO₂(B), obtained via a hydrothermal route, was converted into the stable VO₂(M1), which shows a metal–insulator transition (MIT) at 68 °C that is useful for different applications, from energy-efficient smart windows to dynamic concrete. Within this scenario, a further functionalization of the oxide nanostructures with tetraethyl orthosilicate (TEOS), characterized by an extreme alkaline environment, was carried out to ensure compatibility with the concrete matrix. Structural properties of the synthesized vanadium dioxides were investigated using temperature-dependent X-ray Diffraction analysis (XRD), while compositional and morphological properties were assessed using Scanning Electron Microscopy, Energy Dispersive X-ray Analysis (SEM-EDX), and Transmission Electron Microscopy (TEM). Differential Scanning Calorimetry (DSC) analysis was used to investigate the thermal behavior.

Electronic and thermodynamic properties of native point defects in V2O5: a first-principles study

The formation of native point defects in semiconductors and their behaviors play a crucial role in material properties. Although the native defects of V2O5 include vacancies, self-interstitials, and antisites, only oxygen vacancies have been extensively explored. In this work, we carried out first-principles calculations to systematically study the properties of possible native defects in V2O5. The electronic structure and the formation energy of each defect were calculated using the DFT+U method. Defect concentrations were estimated using a statistical model with a constraint of charge neutrality. We found that the vanadyl vacancy is a shallow acceptor that could supply holes to the system. However, the intrinsic p-type doping in V2O5 hardly occurred because the vanadyl vacancy could be readily compensated by the more stable donor, i.e., the oxygen vacancy and oxygen interstitial, instead of holes. The oxygen vacancy is the most dominant defect under oxygen-deficient conditions. However, under extreme O-rich conditions, a deep donor of oxygen interstitial becomes the major defect species. The dominant oxygen vacancy under synthesized conditions plays an important role in determining the electronic conductivity of V2O5. It induces the formation of compensating electron polarons. The polarons are trapped at V centers close to the vacancy site with the effective escaping barriers of around 0.6 eV. Such barriers are higher than that of the isolated polaron hopping (0.2 eV). The estimated polaron mobilities obtained from kinetic Monte Carlo simulations confirmed that oxygen vacancies act as polaron-trapping sites, which diminishes the polaron mobility by 4 orders of magnitude. Nevertheless, when the sample is synthesized at elevated temperatures, a number of thermally activated polarons in samples are quite high due to the high concentrations of oxygen vacancies. These polarons can contribute as charge carriers of intrinsic n-type semiconducting V2O5.

An improvement in the coloration properties of Ag deposition-based plasmonic EC devices by precise control of shape and density of deposited Ag nanoparticles

Ag nanoparticles exhibit various colors depending on their localized surface plasmon resonance (LSPR). Based on this phenomenon, Ag deposition-based electrochromic devices can represent various optical states in a single device such as the three primary colors (cyan, magenta, and yellow), silver mirror, black and transparent. A control of the morphology of Ag nanoparticles can lead to dramatic changes in color, as their size and shape influence the LSPR band. In this research, we focused on the diffusion rate of Ag⁺ ions when Ag nanoparticles are electrochemically deposited. Consequently, well-isolated Ag nanoparticles were obtained due to the slow growth rate by using an electrolyte with a low concentration of Ag⁺ ions, resulting in an improvement in the color quality of cyan and magenta. Additionally, spherical Ag nanoparticles were deposited in the same device by optimizing their voltage application conditions, which represented yellow and green colors. In particular, green coloration is a unique phenomenon because it can appear by the combination of two absorption peaks of LSPR. As a result of investigating the finite-difference time-domain method, it was observed that the LSPR band in the long wavelength region was originated from the effects of the connection between Ag particles.

Investigation on CH4 sensing characteristics of hierarchical V2O5 nanoflowers operated at relatively low temperature using chemiresistive approach

Methane (CH₄) gas, the second most potent greenhouse gas share a substantial role in contributing to the global warming and it is a necessary pre-requisite to detect the release of CH₄ into the environment at its early stage to combat climate change. In that front, this work is focussed to develop an effective CH₄ gas sensor using vanadium pentoxide (V₂O₅) thin films that works at an operating temperature of ∼100 °C. To understand the effect of sputtering power towards the structural characteristics of V₂O₅ films, X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) analysis were performed from which the orthorhombic polycrystalline structure of V₂O₅ thin films was confirmed with varied texture co-efficient. Further, the surface elemental studies using X-ray photoelectron spectroscopy (XPS) confirmed the prominence of V⁺⁵ oxidation state from the binding energy of V2p_3/2 and O1s peak. The effect of sputtering power on the growth of different nanostructures were observed using field-emission scanning electron microscopy (FE-SEM). The critical role of adsorption and desorption kinetics of the deposited nanostructures were explained through first order kinetics based on Elovich model and the phase stability of different nanostructures were evaluated using Raman spectral analysis. This work achieved the sensor response of about ∼8% towards CH₄ at an operating temperature of 100 °C towards 50 ppm concentration.

Advances in nanomaterials for electrochromic devices

This review article systematically highlights the recent advances regarding the design, preparation, performance and application of new and unique nanomaterials for electrochromic devices.

Carbon-reduction as an easy route for the synthesis of VO2 (M1) and further Al, Ti doping

A low-cost and facile method to synthesize highly crystallized VO2 (M1) particles is proposed, using carbon black as the reducing agent mixed with V2O5 nanopowders comparing two types of vacuum systems for the thermal activation. In a sealed vacuum system, CO gas is generated in the first reductive step, and continues to reduce the new born VO2, until all the V (+4) is reduced to V (+3), resulting in V2O3 formation at 1000 °C. In contrast, in a dynamic vacuum system, CO gas is ejected through pumping as soon as it is generated, leading to the formation of pure VO2 (M1) at high temperatures (i.e. in the range 700 °C ≤ T ≤ 1000 °C). The evolution of the carbon content, determined by CHNS, of each sample versus the synthesis conditions, namely temperature and type of vacuum system, confirms that the transformation of V (+5) into V (+4) or V (+3) can be controlled. The characterization of the morphologies and crystal structures of two synthesized VO2 (M1) at 700 °C and 1000 °C shows the possibility to tune the crystallite size from 1.8 to more than 5 μm, with a uniform size distribution and highly crystallized powders. High purity VO2 (M1) leads to strong physical properties illustrated by a high latent energy (∼55 J g-1) during the phase transition obtained from DSC as well as high resistivity changes. In addition, with this method, dopants such as Ti4+ or Al3+ can be successfully introduced into VO2 (M1) thanks to the preparation of Al or Ti-doped nano-V2O5 by co-precipitation in polyol medium before carbon-reduction.

Geometric considerations of the monoclinic–rutile structural transition in VO2

Geometrical and experimental examinations of VO₂ show how hysteretic phase transition phenomena across the MIT can be driven by positive crystal energy effects of increasing unit cell volume.

Two-Step Synthesis of VO2 (M) with Tuned Crystallinity

Highly crystallized monoclinic vanadium dioxide, VO₂ (M), is successfully synthesized by a two-step thermal treatment: thermolysis of vanadyl ethylene glycolate (VEG) and postannealing of the poorly crystallized VO₂ powder. In the first thermolysis step, the decomposition of VEG at 300 °C is investigated by X-ray diffraction and scanning electron microscopy (SEM). A poorly crystallized VO₂ powder is obtained at a strict time of 3 min, and it is found that the residual carbon content in the powder played a critical role in the post crystallization of VO₂ (M). After postannealing at 500 and 700 °C in an oxygen-free atmosphere, VO₂ particles of various morphologies, of which the crystallite size increases with increasing temperature, are observed by SEM and transmission electron microscopy. The weight percent of crystalline VO₂, calculated using the Fullprof program, increases from 44% to 79% and 100% after postannealing. The improved crystallinity leads to an improvement in metal-insulator transition behaviors demonstrated by sharper and more intense differential scanning calorimetry peaks. Moreover, V₂O₃ and V₂O₅ with novel and particular microstructures are also successfully prepared with a similar two-step method using postannealing treatment under reductive or oxidizing atmospheres, respectively.

Supercritical temperature synthesis of fluorine-doped VO2(M) nanoparticle with improved thermochromic property

Fluorine-doped VO₂(M) nanoparticles have been successfully synthesized using the hydrothermal method at a supercritical temperature of 490 °C. The pristine VO₂(M) has the critical phase transformation temperature of 64 °C. The morphology and homogeneity of the monoclinic structure VO₂(M) were adopted by the fluorine-doped system. The obtained particle size of the samples is smaller at the higher concentration of anion doping. The best reduction of critical temperature was achieved by fluorine doping of 0.13% up to 48 °C. The thin films of the fluorine-doped VO₂(M) showed pronounced thermochromic property and therefore are suitable for smart window applications.

VO2(D) hollow core–shell microspheres: synthesis, methylene blue dye adsorption and their transformation into C/VOxnanoparticles

Hollow core–shell VO₂(D) microspheres were fabricated and they exhibited excellent MB adsorption ability; and the regenerated C/VO_xnanoparticles showed enhanced adsorption performance and good reusability.