An Amine Functionalized Metal–Organic Framework as an Effective Catalyst for Conversion of CO2 and Biginelli Reactions

Syntheses of heterometallic organic frameworks catalysts via multicomponent postmodification: For improving CO2 photoreduction efficiency

To enhance the economic viability of photocatalytic materials for carbon capture and conversion, the challenge of employing expensive photosensitizer must be overcome. This study aims to improve the visible light utilization with zirconium-based metal-organic frameworks (Zr-MOFs) by employing a multi-component post-synthetic modification (PSM) strategy. An economical photosensitiser and copper ions are introduced into MOF 808 to enhance its photoreduction properties. Notably, the PSM of MOF 808 shows the highest CO yield up to 236.5 μmol g-1 h-1 with aHCOOH production of 993.6 μmol g-1 h-1 under non-noble metal, and its mechanistic insight for CO2 reaction is discussed in detail. The research results have important reference value for the potential application of photocatalytic metal-organic frameworks.

Two Thiophene-Functionalized Co-MOFs as Green Heterogeneous Catalysts for the Biginelli Reaction

Two Co(II) metal-organic frameworks (Co-MOFs), namely, [Co(DMTDC)(bimb)]n (Co-MOF-1) and {[Co(DPTDC)(bimb)(H2O)]·2DMF}n (Co-MOF-2) (H2DMTDC = 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid, H2DPTDC = 3,4-diphenylthieno[2,3-b]thiophene-2,5-dicarboxylic acid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene), were obtained by the reaction of flexible N-containing ligand bimb and two structurally related thiophene-containing ligands H2DMTDC and H2DPTDC, respectively. These Co-MOFs displayed a 3D framework and porous structure, respectively. Co-MOF-1 and the activated sample Co-MOF-2' could act as green heterogeneous catalysts for the one-pot multicomponent Biginelli reaction, specifically the dehydration condensation process involving aldehydes, acetoacetates, and urea to yield dihydropyrimidin-2(1H)-ones. The reaction has advantages such as solvent-free conditions, water as only byproduct, readily accessible starting materials, excellent functional group compatibility, and simple operation. Both catalysts exhibited a wide substrate scope and maintained significant catalytic activity over five cycles. The special catalytic performance may be ascribed to functional groups within the ligand.

Fabrication of magnetic carbohydrate-modified iron oxide nanoparticles (Fe3O4/pectin) decorated with bimetallic Co/Cu-MOF as an effective and recoverable catalyst for the Biginelli reaction

Due to their biocompatibility, facile recoverability, mechanical and thermal stability, high surface area, and active catalytic sites, magnetic nanocomposites, containing natural polymers and magnetic nanoparticles, have been used to produce supports for catalysts or biocatalysts. Pectin, an important polycarbohydrate, has abundant functional groups with excellent ability to coat the surface of the nanoparticles to fabricate composite and hybrid materials. A novel bimetallic cobalt(ii) and copper(ii)-based metal-organic framework (Co/Cu-MOF) immobilized pectin-modified Fe3O4 magnetic nanocomposite was designed and fabricated. Fe3O4 nanoparticles were modified in situ by pectin and, subsequently, used as a support for growing Co/Cu-MOF [Fe3O4/pectin/(Co/Cu)MOF]. The properties of the nanocomposite were investigated by FT-IR, XRD, SEM, EDS, VSM, STA, and BET. The nanocomposite exhibited both magnetic characteristics and a high surface area, making it a suitable candidate for catalytic applications. Then, the Fe3O4/pectin/(Co/Cu)MOF nanocomposite was utilized in the Biginelli reaction for the production of biologically active dihydropyrimidinones. Due to paramagnetism, Fe3O4/pectin/(Co/Cu)MOF was easily recovered and reused in six cycles without significant loss in reactivity. This green method comprises several benefits, such as mild reaction conditions, free-solvent media, high yields, easy workup, short reaction times and reusability of the prepared catalyst.

Halloysite Nanotubes as Bimodal Lewis/Brønsted Acid Heterogeneous Catalysts for the Synthesis of Heterocyclic Compounds

Halloysite nanotubes can be used for the preparation of solid catalysts. Owing to their natural availability at low-cost as well as to their large and easy-to-functionalize surface, they can be conveniently activated with mineral acids or derivatized with acidic groups. Nevertheless, the use of HNTs as catalysts in complex transformations is still limited. Herein, we report two strategies to utilize HNT-based materials as solid acidic catalysts for the Biginelli reaction. To this aim, two methods for increasing the number of acidic sites on the HNTs were explored: (i) the treatment with piranha solution (Pir-HNTs) and (ii) the functionalization with phenylboronic acid (in particular with benzene-1,4-diboronic acid: the sample is denoted as HNT-BOA). Interestingly, both strategies enhance the performance of the multicomponent reaction. Pir-HNTs and HNT-BOA show an increased reactivity (72% and 89% yield, respectively) in comparison with pristine HNTs (52%). Additionally, Pir-HNTs can be reused up to five times without significant performance loss. Moreover, the method also displays good reaction scope, as demonstrated by the preparation of 12 different 3,4-dihydropyrimidinones in up to 71% yield. Therefore, the described strategies are promising for enhancing the acidity of the HNTs as catalysts for the organic reaction.

l-Asparagine-EDTA-amide silica-coated MNPs: a highly efficient and nano-ordered multifunctional core-shell organocatalyst for green synthesis of 3,4-dihydropyrimidin-2(1H)-one compounds

In this study, new l-asparagine grafted on 3-aminopropyl-modified Fe3O4@SiO2 core-shell magnetic nanoparticles using the EDTA linker (Fe3O4@SiO2-APTS-EDTA-asparagine) was prepared and its structures properly confirmed using different spectroscopic, microscopic and magnetic methods or techniques including FT-IR, EDX, XRD, FESEM, TEM, TGA and VSM. The Fe3O4@SiO2-APTS-EDTA-asparagine core-shell nanomaterial was found, as a highly efficient multifunctional and recoverable organocatalyst, to promote the efficient synthesis of a wide range of biologically-active 3,4-dihydropyrimidin-2(1H)-one derivatives under solvent-free conditions. It was proved that Fe3O4@SiO2-APTS-EDTA-asparagine MNPs, as a catalyst having excellent thermal and magnetic stability, specific morphology and acidic sites with appropriate geometry, can activate the Biginelli reaction components. Moreover, the environmental-friendliness and nontoxic nature of the catalyst, cost effectiveness, low catalyst loading, easy separation of the catalyst from the reaction mixture and short reaction time are some of the remarkable advantages of this green protocol.

Topologically Driven Pore/Surface Engineering in a Recyclable Microporous Metal-Organic Vessel Decorated with Hydrogen-Bond Acceptors for Solvent-Free Heterogeneous Catalysis

The use of metal-organic frameworks (MOFs) comprising custom-designed linkers/ligands as efficient and recyclable heterogeneous catalysts is on the rise. However, the topologically driven bifunctional porous MOFs for showcasing a synergistic effect of two distinct activation pathways of substrates (e.g., involving hydrogen bonding and a Lewis acid) in multicomponent organic transformations are very challenging. In particular, the novelty of such studies lies in the proper pore and/or surface engineering in MOFs for bringing the substrates in close proximity to understand the mechanistic aspects at the molecular level. This work represents the topological design, solid-state structural characterization, and catalytic behavior of an oxadiazole tetracarboxylate-based microporous three-dimensional (3D) metal-organic framework (MOF), {[Zn₂(oxdia)(4,4'-bpy)₂]·8.5H₂O}_n (1), where the tetrapodal (4-connected) 5,5'-(1,3,4-oxadiazole-2,5-diyl)diisophthalate (oxdia^4-), the tetrahedral metal vertex (Zn(II)), and a 2-connected pillar linker 4,4'-bipyridine (4,4'-bpy) are unique in their roles for the formation, stability, and function. As a proof of concept, the efficient utilization of both the oxadiazole moiety with an ability to provide H-bond acceptors and the coordinatively unsaturated Zn(II) centers in 1 is demonstrated for the catalytic process of the one-pot multicomponent Biginelli reaction under mild conditions and without a solvent. The key steps of substrate binding with the oxadiazole moiety are ascertained by a fluorescence experiment, demonstrating a decrease or increase in the emission intensity upon interaction with the substrates. Furthermore, the inherent polarizability of the oxadiazole moiety is exploited for CO₂ capture and its size-selective chemical fixation to cyclic carbonates at room temperature and under solvent-free conditions. For both catalytic processes, the chemical stability, structural integrity, heterogeneity, versatility in terms of substrate scope, and mechanistic insights are discussed. Interestingly, the first catalytic process occurs on the surface, while the second reaction occurs inside the pore. This study opens new ways to catalyze different organic transformation reactions by utilizing this docking strategy to bring the multiple components close together by a microporous MOF.

Guanidyl-implanted UiO-66 as an efficient catalyst for the enhanced conversion of carbon dioxide into cyclic carbonates

The development of heterogeneous catalysts for promoting epoxide cycloaddition with carbon dioxide is highly desirable for recycling CO₂ and achieving the goal of carbon neutrality. Herein, we designed and synthesized Zr-based metal organic frameworks (MOFs) by implanting functional guanidyl into the framework via mixing different molar ratios of 4-guanidinobenzoic acid (Gua) with 1,4-benzenedicarboxylic acid (BDC). Consequently, a small sized Zr-MOF (∼350 nm) can be prepared by implanting Gua with 20% molar ligands, denoted as UiO-66-Gua_0.2(s). Compared to large sized and different guanidyl Zr-MOFs, UiO-66-Gua_0.2(s) exhibited an optimal activity on catalyzing epoxide cycloaddition with CO₂ in the presence of the Bu₄NBr cocatalyst. A yield of 97% for the product of chloropropene carbonate was achieved at 90 °C under 1 atm CO₂. The great performance of UiO-66-Gua_0.2(s) might be attributed to the synergistic effect of guanidyl groups as hydrogen-bond donors and Zr centers acting as Lewis-acidic sites. In addition, the heterogeneous catalyst of UiO-66-Gua_0.2(s) exhibited a great versatility towards converting other epoxides and a satisfactory recyclability for five consecutive runs. Moreover, a plausible reaction mechanism has been proposed for UiO-66-Gua_0.2(s) in promoting CO₂ epoxide cycloaddition reactions.

Synthesis of dihydropyrimidinones via multicomponent reaction route over acid functionalized Metal-Organic framework catalysts

Multi component reactions over heterogeneous solid acid catalysts are extremely important owing to easy separation, amenable recycling, and prospective scaling up of the process. Here, we are reporting the synthesis of biologically important dihydropyrimidinones over postsynthetic modified Cr-based metal-organic framework materials as heterogeneous catalysts containing the bifunctional Lewis and Brønsted acid sites. Cr-based metal-organic frameworks contained coordinatively unsaturated metal sites as inherent Lewis acid sites, whereas postsynthetic modifications introduced the Brønsted acid sites in the framework. A direct one pot synthesis route was employed to produce the pristine MOF in pure aqueous medium without using any additives. The bulk structure, morphology, surface and bonding properties of the synthesized materials were thoroughly characterized with powder XRD, FTIR, XPS, FE-SEM, TGA, and N₂ sorption isotherms. A qualitative evolution of acid strength was carried out over the functionalized MOFs. Among the post synthetic functionalized materials, carboxylic acid functionalized framework exhibited a very high yield of dihydropyrimidinones under solvent less moderate reaction conditions. The catalyst also demonstrated a robust recyclability and wide substrate scope. Comparative study showed a very high catalytic activity of the postsynthetic modified MOFs in comparison to the reported literature. The reaction condition was optimized by varying parameters like solvent, temperature, reaction duration and catalyst loadings. The mechanistic studies indicated the involvement of both the Lewis and Brønsted sites acid sites of the catalysts in the multicomponent reaction.

HKUST-1 Metal Organic Framework as an Efficient Dual-Function Catalyst: Aziridination and One-Pot Ring-Opening Transformation for Formation of β-Aryl Sulfonamides with C-C, C-N, C-S, and C-O Bonds

Metal-organic frameworks (MOFs) are extensively used in catalysis due to their robust structure, well-defined periodic reaction centers, and high porosity. We report Cu₃(BTC)₂·(H₂O)₃ (HKUST-1) as an efficient heterogeneous catalyst for aziridination of alkene and ring-opening reaction of activated aziridines. Furthermore, we demonstrate that the transfer of a nitrogen group from PhINTs to olefins and its analogue to give aziridines takes place at the coordinatively unsaturated Cu(II) site of Cu₃(BTC)₂-MOF; however, the ring opening of activated aziridines is controlled by the Cu(II) Lewis acid site, and generation of coordinative unsaturation by thermal activation of the MOF is not necessarily important. The key advantage of this catalytic approach is the direct formation of C-C, C-N, C-O, and C-S bonds yielding β-aryl sulfonamide derivatives through a simultaneous aziridination ring-opening reaction of the alkene in one pot using a single catalyst.

A green and sustainable approach for the synthesis of 1,5-benzodiazepines and spirooxindoles in one-pot using a MIL-101(Cr) metal–organic framework as a reusable catalyst

Green and efficient protocols for the synthesis of 1,5-benzodiazepines and spirooxindoles were developed utilizing MIL-101(Cr) in SFRC and water as solvent respectively.

Niobium Oxides as Heterogeneous Catalysts for Biginelli Multicomponent Reaction

This study reports a simple, reusable, and recoverable niobium-based heterogeneous catalysts for Biginelli multicomponent reactions. Different methods of catalysts preparation were investigated. For this purpose, HY-340 (Nb₂O₅·nH₂O) and Nb₂O₅ were chemically and/or thermally treated and investigated as catalysts for dihydropyrimidinones (DHPMs) production. The catalysts were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, temperature-programmed desorption of NH₃, adsorption/desorption of N₂ at -196 °C, and thermogravimetric and differential thermal analysis. The characterization results showed that niobium oxides have the potential to be used as catalysts because of high crystallinity and large surface area. Among the tested catalysts, Nb₂O₅ chemically treated (Nb₂O₅/T) showed the best catalytic performance. In the absence of solvents, 94% yield of DHPMs was achieved. Also, Nb₂O₅/T can be reused three times without a significant yield decrease. Additionally, a feasible reaction pathway was suggested based on the Knoevenagel mechanism for DHPM synthesis using niobium-based catalysts.

A comparative study between Cu(INA)2-MOF and [Cu(INA)2(H2O)4] complex for a click reaction and the Biginelli reaction under solvent-free conditions

The catalytic activity of metal–organic framework Cu(INA)₂ (INA = isonicotinate ion) and the complex [Cu(INA)₂(H₂O)₄] were studied in the Copper-catalyzed Azide–Alkyne Cycloaddition (CuAAC) and Biginelli reaction under solvent-free reaction conditions. The robust, efficient and eco-friendly new method allowed the preparation of a variety of 1,2,3-triazole compounds in good to excellent yields and high selectivity for the 1,4-disubstituted triazole. Moreover, for the Biginelli reaction between aldehydes, ethyl acetoacetate and urea, the corresponding dihydropyrimidinones (DHPMs) were also obtained in satisfactory yields under mild reaction conditions for both catalysts. The comparative study between Cu(INA)₂-MOF and [Cu(INA)₂(H₂O)₄] complex demonstrated better results for the Cu-MOF, for both the yields and the regioselectivity of the products. Furthermore, no change in the heterogeneous catalyst structure was observed after the reaction, allowing them to be recovered and reused without any loss of activity.

The catalytic application of Cu(INA)₂-MOF in click and Biginelli reactions was investigated and a comparative study with the [Cu(INA)₂(H₂O)₄] complex was performed.

Efficient Conversion of CO2 via Grafting Urea Group into a [Cu2(COO)4]-Based Metal-Organic Framework with Hierarchical Porosity

The assembly of mixed [1,1';3',1'']terphenyl-4,5',4''-tricarboxylic acid (H₃TPTC) and [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂BPDC), 2,2'-diamino-[1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂BPDC-NH₂), or 6-oxo-6,7-dihydro-5H-dibenzo[ d, f][1,3]diazepine-3,9-dicarboxylic acid (H₂BPDC-Urea) with Cu²⁺ ion generated the corresponding copper-paddlewheel-based metal-organic framework (MOF) [Cu₅(TPTC)₃(BPDC)_0.5(H₂O)₅] (1), [Cu₅(TPTC)₃(BPDC-NH₂)_0.5(H₂O)₅] (1-NH₂), or [Cu₅(TPTC)₃(BPDC-Urea)_0.5(H₂O)₅] (1-Urea). They are isostructural with hierarchical porosity, consisting of zero-dimensional cage (19.2 Å × 18.9 Å) and one-dimensional pillar channel (29.7 Å × 15.1 Å) in a manner of face sharing. Platon analyses revealed the porous volume ratios are 80.2%, 80.0%, and 77.8% for 1, 1-NH₂, and for 1-Urea, respectively. Thermogravimetric measurements suggested 53, 51, and 48 wt % guest molecules in 1, 1-NH₂, and 1-Urea, respectively. 1-NH₂ and 1-Urea were precisely functionalized via the introduction of amino and urea functional groups into the pillar channels. The constructed MOF 1-Urea, incorporating both exposed copper active sites and accessible urea functional groups to substrates, presents high efficiency on catalytic CO₂ cycloaddition with propene oxide to produce cyclic carbonate in the yield of 98% with a TOF value of 136 h^-1 at 1 atm and room temperature. This synergic effect provides a new strategy for designing high-efficient catalysts for CO₂ chemical conversion under ambient conditions.

Biginelli Reaction: Polymer Supported Catalytic Approaches

The Biginelli product, dihydropyrimidinone (DHPM) core, and its derivatives are of immense biological importance. There are several methods reported as modifications to the original Biginelli reaction. Among them, many involve the use of different catalysts. Also, among the advancements that have been made to the Biginelli reaction, improvements in product yields, less hazardous reaction conditions, and simplified isolation of products from the reaction predominate. Recently, solid-phase synthetic protocols have attracted the research community for improved yields, simplified product purification, recyclability of the solid support, which forms a special economic approach for Biginelli reaction. The present Review highlights the role of polymer-supported catalysts in Biginelli reaction, which may involve organic, inorganic, or hybrid polymers as support for catalysts. A few of the schemes involve magnetically recoverable catalysts where work up provides green approach relative to traditional methods. Some research groups used polymer-catalyst nanocomposites and polymer-supported ionic liquids as catalyst. Solvent-free, an ultrasound or microwave-assisted Biginelli reactions with polymer-supported catalysts are also reported.

Amino-decorated bis(pyrazolate) metal–organic frameworks for carbon dioxide capture and green conversion into cyclic carbonates

The amino-tagged bis(pyrazolate) MOF Zn(BPZNH2) is an excellent CO₂ adsorbent and CO₂ epoxidation catalyst under green conditions.

Cross-dehydrogenative coupling of coumarins with Csp3–H bonds using an iron–organic framework as a productive heterogeneous catalyst

The iron–organic framework VNU-20 was utilized as an active heterogeneous catalyst for the cross-dehydrogenative coupling of coumarins with Csp³–H bonds in alkylbenzenes, cyclohexanes, ethers, and formamides.

Two metal–organic frameworks based on a flexible benzimidazole carboxylic acid ligand: selective gas sorption and luminescence

Two new 3D frameworks with a novel (3,4,7)-connected trinodal net and (3,6)-connected binodal net were obtained by using a flexible ligand, showing significant adsorption selectivity for CO₂ over CH₄ as well as strong luminescence.