ICT–Isomerization-Induced Turn-On Fluorescence Probe with a Large Emission Shift for Mercury Ion: Application in Combinational Molecular Logic

Turn-on detection of Al3+ ions using quinoline-based tripodal probe: mechanistic investigation and live cell imaging applications

In this study, an easily synthesizable Schiff base probe TQSB having a quinoline fluorophore is demonstrated as a fluorescent and colorimetric turn-on sensor for Al3+ ions in a semi-aqueous medium (CH3CN/water; 4 : 1; v/v). Absorption, emission and colorimetric studies clearly indicated that TQSB exhibited a high selectivity toward Al3+, as observed from its excellent binding constant (Kb = 3.8 × 106 M-1) and detection limit (7.0 nM) values. TQSB alone was almost non-fluorescent in nature; however, addition of Al3+ induced intense fluorescence at 414 nm most probably due to combined CHEF (chelation-enhanced fluorescence) and restricted PET effects. The sensing mechanism was established via Job's plot, NMR spectroscopy, ESI-mass spectrometry, and density functional theory (DFT) analyses. Furthermore, to evaluate the applied potential of probe TQSB, its sensing ability was studied in real samples such as soil samples and Al3+-containing Digene gastric tablets as well as on low-cost filter paper strips. Fluorescence microscopy imaging experiments further revealed that TQSB can be used as an effective probe to detect intracellular Al3+ in live cells with no cytotoxicity.

Self-indicating polymers: a pathway to intelligent materials

Self-indicating polymers have emerged as a promising class of smart materials that possess the unique ability to undergo detectable variations in their physical or chemical properties in response to various stimuli. This article presents an overview of the most important mechanisms through which these materials exhibit self-indication, including aggregation, phase transition, covalent and non-covalent bond cleavage, isomerization, charge transfer, and energy transfer. Aggregation is a prevalent mechanism observed in self-indicating polymers, where changes in the degree of molecular organization result in variations in optical or electrical properties. Phase transition-induced self-indication relies on the transformation between different phases, such as liquid-to-solid or crystalline-to-amorphous transitions, leading to observable changes in color or conductivity. Covalent bond cleavage-based self-indicating polymers undergo controlled degradation or fragmentation upon exposure to specific triggers, resulting in noticeable variations in their structural or mechanical properties. Isomerization is another crucial mechanism exploited in self-indicating polymers, where the reversible transformation between the different isomeric forms induces detectable changes in fluorescence or absorption spectra. Charge transfer-based self-indicating polymers rely on the modulation of electron or hole transfer within the polymer backbone, manifesting as changes in electrical conductivity or redox properties. Energy transfer is an essential mechanism utilized by certain self-indicating polymers, where energy transfer between chromophores or fluorophores leads to variations in the emission characteristics. Furthermore, this review article highlights the diverse range of applications for self-indicating polymers. These materials find particular use in sensing and monitoring applications, where their responsive nature enables them to act as sensors for specific analytes, environmental parameters, or mechanical stress. Self-indicating polymers have also been used in the development of smart materials, including stimuli-responsive coatings, drug delivery systems, food sensors, wearable devices, and molecular switches. The unique combination of tunable properties and responsiveness makes self-indicating polymers highly promising for future advancements in the fields of biotechnology, materials science, and electronics.

Simple turn-on fluorescent chemosensor for ultrafast and highly selective trace-level detection of Cu2+ ions in aqueous solutions

A benzimidazole-based probe, BIPMA (2-(1H-benzo[d]imidazol-2-yl)-N-(pyridin-2-ylmethyl)aniline), was designed and synthesized to detect Cu2+ ions. BIPMA exhibited a fluorescent "turn-on" mechanism when bound to Cu2+ ions in an acetonitrile/water mixture (5:5, v/v, HEPES 10 mM, pH 7.4) owing to the synergistic effect of the chelation-enhanced fluorescence and internal charge-transfer mechanisms. Moreover, the BIPMA probe effectively detected nanomolar-range concentrations (0-400 nM) of Cu2+ ions in an aqueous system with a detection limit of 4.80 nM; this value is significantly lower than that set by the U.S. Environmental Protection Agency (≈20 μM). Additionally, BIPMA showed an ultrafast response to Cu2+ ions, with a maximum intensity achieved 25 s after adding Cu2+. Furthermore, BIPMA detected Cu2+ ions in solutions with a pH range of 5-11, without being influenced by pH, underscoring its applicability under various physiological conditions. Density functional theory studies revealed that internal charge transfer was responsible for emission. Finally, BIPMA effectively detected Cu2+ ions in real water samples and living cells.

A simple 'turn-on' fluorescence chemosensor for Al(iii) detection in aqueous solution and solid matrix

A simple fluorescence chemosensor of FHS-OH based on salicylaldehyde Schiff base was developed via a one-step reaction, which achieved a fast and highly selective response for Al(iii). Mechanism studies showed that when FHS-OH was exposed to Al(iii) with 1 : 2 binding stoichiometry in an aqueous solution at neutral pH, C[double bond, length as m-dash]N isomerization and PET processes were limited, resulting in a 'turn-on' fluorescence response with a low detection limit of 63 nmol L-1 and a satisfying linear range of 0.0-20.0 μmol L-1. Compared to traditional detection methods for Al(iii), fluorometry using FHS-OH has several advantages, including simplicity, quick response, and capability of real-time detection. More importantly, the detection of Al(iii) on a solid matrix (test paper) was successfully achieved. After the addition of Al(iii), a significant emission colour change from green to bright blue was observed by the naked eye owing to the intrinsic aggregation-induced emission (AIE) characteristic of FHS-OH.

Pyrene-acylhydrazone-based Turn-on Fluorescent Probe for Highly Sensitive Detection Cu2+ and Application in Bioimaging

The development of highly selective and sensitive, low detection limits, and biocompatible turn-on copper ion fluorescent probes is of great significance for the environment and life sciences. In this study, a novel turn-on fluorescent probe T based on pyrene-acylhydrazone was synthesized via an efficient one-step condensation reaction and characterized by 1H NMR, 13C NMR and HRMS. The probe T exhibited high selectivity with a low detection limit of 0.304 nM towards Cu2+ in DMSO/H2O (v/v = 1 : 1) medium by a PET-TICT dual interplaying sensing mechanisms. Job's plot analysis and HRMS data confirmed the 1 : 1 binding stoichiometry between T and Cu2+ with an association constant of 5.7×103 M-1. Additionally, the binding model was investigated by 1H NMR titration and FT-IR spectra. Furthermore, probe T exhibits low cellular toxicity and excellent membrane permeability, and has been successfully applied for fluorescent imaging of copper ions in live HT-22 cells.

Coordination-Driven Salamo-Salen-Salamo-Type Multinuclear Transition Metal(II) Complexes: Synthesis, Structure, Luminescence, Transformation of Configuration, and Nuclearity Induced by the Acetylacetone Anion

A flexible polydentate Salamo-Salen-Salamo hybrid ligand H₄L was designed and synthesized, which has rich pockets (salamo and salen pockets) so that it may have fascinating coordination patterns with transition metal(II) ions. Four multinuclear transition metal(II) complexes, novel butterfly-shaped homotetranuclear [Ni₄(L)(μ₁-OAc)₂(μ_1,3-OAc)₂(H₂O)_0.5(CH₃CH₂OH)_3.5]·4CH₃CH₂OH (1), helical homotrinuclear [Zn₃(L)(μ₁-OAc)₂]·2CH₃CH₂OH (2), double-helical homotrinuclear [Cu₂(H₂L)₂]·2CH₃CN (3), and mononuclear [Ni(H₂L)]·1.5CH₃COCH₃ (4), have been synthesized and characterized by single-crystal X-ray diffraction. The effects of different anions [OAc^- and (O₂C₅H₇)^2-] on the complexation behavior of H₄L with transition metal(II) ions were studied by UV-vis spectrophotometry. The fluorescent properties of the four complexes were studied with zebrafish, which are expected to be a potential light-emitting material. Ultimately, interaction region indicator (IRI) valuations, Hirshfeld surface analyses, density functional theory (DFT & TD-DFT), electrostatic potential analyses (ESP), and simulations were carried out to further demonstrate the weak interactions and electronic properties of the free ligand and its four complexes.

Enantioselective Recognition of Lysine and Phenylalanine Using an Imidazole Salt-Type Fluorescent Probe Based on H8-BINOL

An imidazole bromide fluorescent probe (R)-1 based on chiral H₈-BINOL was synthesized with a high yield; it was found to have good enantioselective recognition of lysine and phenylalanine using fluorescence analysis. When L-lysine was recognized, the enantioselective fluorescence enhancement ratio was 2.7 (ef = I_L - I₀/I_D - I₀, ef = 2.7, 20 eq Lys); as the amount of L-Lys increased, a distinct red shift was observed (the wavelength varied by 55.6 nm, 0-100 eq L-Lys), whereas D-Lys had a minimal red shift. The generation of this red shift phenomenon was probably due to the ICT effect; the probe's intramolecular charge transfer was affected after (R)-1 bound to L-Lys, and this charge transfer was enhanced, leading to a red shift in fluorescence. In addition to the enantioselective recognition of lysine, phenylalanine was also recognized; the enantioselective fluorescence enhancement ratio was 5.1 (ef = I_L - I₀/I_D - I₀, ef = 5.1, 20 eq Phe).

Steric hindrance effect on the excited-state proton transfer process: TDDFT study on the fluorescent sensing mechanism of a fluoride sensor

An understanding of the excited-state process and the sensing mechanism for specific anions can be helpful for the design and synthesis of fluorescent sensors in analytical chemistry and biotechnology. Here, we theoretically investigated the fluorescent response mechanism of a reported acylhydrazone-based fluorescent sensor (Soft Matter, 2019, 15, 6690) for fluoride recognition using the time-dependent density functional theory approach. At the M06/TZVP/SCM level, the vertical excitation energies, which were calculated based on the ground state and first singlet-state geometries of the sensor molecule, agreed well with the experimental ultraviolet-visible and fluorescence spectra. Therefore, the time-dependent density functional theory method was considered reasonable and effective. According to the frontier orbital analysis and an excited-state potential energy scan, we proposed an excited-state proton transfer mechanism for the sensor-fluorine complex, where the steric hindrance leads to a high potential barrier. The excited-state proton transfer process facilitates sensor molecule deprotonation, alleviates its steric hindrance effect and expands its conjugated system. As a result, the fluorescence emission band of the sensor molecule was red-shifted significantly with the addition of fluoride anion. Based on this fluorescence difference, the sensor could be used for fluoride anion identification. This work provides a strategy to study sensor-analyte interactions in the excited state and offers an approach to tune the fluorescence emission wavelength of sensor molecules in anionic environments.

Development of tBu-phenyl Acetamide Appended Thiacalix[4]arene as "Turn-ON" Fluorescent Probe for Selective Recognition of Hg(II) Ions

Herein, a novel N-(4-(tert-butyl)-phenyl)-2-chloroacetamide functionalized thiacalix[4]arene architecture, viz TCAN2PA has been synthesized and the sensing behaviour towards metal ions were explored. The probe, TCAN2PA displayed "turn-on" fluorescence response towards Hg(II) ions in acetonitrile over a series of competing common metal ions. A bathochromic shift in absorption band along with a significant "Turn-On" fluorescence behaviour of TCAN2PA was observed upon interaction with Hg(II) ions. The lower rim modification of thiacalixarene with N-(4-(tert-butyl)-phenyl)-2-chloroacetamide actively contributes toward the fluorescence property due to the presence of strong electron-donating aryl amido substituent. Fluorescence titration experiments were conducted to find out the limit of detection and to understand binding stoichiometry as well. The electron transfer interactions between the electron rich TCAN2PA host with Hg(II) ions have been postulated which is also supported by computational modelling insights.

Cyclic vs. acyclic alkyne towards Hg2+ ion detection: combined experimental and theoretical studies

Comparison between the alkynes in terminal and internally conjugated 1,3-diyne systems produces differences in molecular recognition, maintaining the HSAB principle.

Strategic Design of a 2,6-Disubstituted Pyridine-based Probe having Hard-Soft Centers: Responsive Divergence from One Core

Alkyne is a versatile functional group in organic chemistry, and is able to undergo a wide variety of reactions and interactions. Featuring a reactive functional group, alkyne participates in many...

Fluorescent chemosensors containing redox-active ferrocene: a review

The redox-active ferrocene containing two cyclopentadienyl rings and iron was extensively employed in the field of sensing, catalysis, medicine, biotechnology etc., due to the structural stability, solubility in common solvents and easy structural modification to make a wide variety of ferrocene derivatives. The ferrocene moiety can be linked suitably with fluoro-chromogenic units and applied for the multichannel (fluorescent, chromogenic and redox) sensing of various bioactive and toxic analytes. This review was narrated to compile some important ferrocene based fluorescent chemosensors developed for the detection of metal ions, anions and neutral analytes. The analytical novelty and sensing mechanisms of the summarized chemosensors are discussed to open new scopes for future research.

Highly selective fluorescent peptide-based chemosensors for aluminium ions in aqueous solution

Two novel fluorescent peptide-based chemosensors, including A (2-amino-benzoyl-Ser-Glu-Glu-NH₂) and B (2-amino-benzoyl-Ala-Glu-Pro-Glu-Ala-Glu-Pro-NH₂) were synthesized and characterized by nuclear magnetic resonance (NMR) spectra. These fluorescent probes exhibited excellent selective and sensitive responses to Al³⁺ ions over other metal ions in aqueous buffered solutions. The limits of detection for both chemosensors towards the Al³⁺ ions were in the order of ∼10^-7 M (A: 155 nM and B: 195 nM), which clearly indicates that these probes have significant potential for biological applications. They also displayed high binding affinity (1.3029 × 10⁴ M^-1 and 1.7586 × 10⁴ M^-1 relevant to A and B respectively). These two chemosensors are great analytical probes that produce turn-on responses upon binding to Al³⁺ ions through an intramolecular charge transfer (ICT) mechanism. In addition, the application of both chemosensors was examined over a wide range of pH. The fluorescent peptide-based probes and Al³⁺ form a 1:1 coordination complex according to the ESI-MS and Job's plot analysis. Notably, upon addition of Al³⁺ to these chemosensors, a fluorescence enhancement of approximately 8-fold was observed and the binding mode was determined using NMR titration and fluorescence emission data.

Theoretical study on the sensing mechanism of a coumarin-based fluorescent probe for biological thiols

The sensing mechanism of a reported fluorescence probe for cysteine, homocysteine and glutathione (Yin et al., 2018) has been investigated by time-dependent density functional theory. Experimental absorption and emission spectra of the probe before and after thiol addition were reproduced well by theoretical calculations, which validated the rationality of the method. Optimized geometries showed that the probe molecule had distinctly different geometries in its ground and excited states. It corresponded to the photoisomerization process and explained the weak fluorescence of the probe molecule. Moreover, by the potential energy curve scan, photoisomerization was further confirmed to be a spontaneous process with a barrier that barely existed. Frontier orbital analysis indicated that this photoinduced isomerization of the probe molecule derived from the antibonding character for lowest unoccupied molecular orbital at its CC double bond. In contrast, probe-thiol complexes exhibited similar geometries in their ground and excited states, which was responsible for the strong fluorescence of the probe with thiols. Due to distinct excited-processes, the probe can be used to sense thiols by monitoring the fluorescent change.

A novel near-infrared optical and redox-active receptor for the multi-model detection of Hg2+ in water and living cells

A key issue for constructing optical and redox-active receptors is how to conjugate a specific sensing kernel with a multi-signal-responsive system to carry out multi-feature analysis. Mercury is considered to be highly toxic to human health and ecological security. In this work, we present a novel near-infrared optical and redox-active receptor that can sense Hg²⁺ at ppb level in aqueous media via multi-model monitors with a low detection limit of 8.4 × 10^-9 M (1.68 ppb). This receptor features a visible detection, 'off-on' fluorescence response, and efficient electrochemistry assessment, as well as pH-insensitivity to Hg²⁺ with high sensitivity. In view of its marked near-infrared emission and fluorescence enhancement, we successfully applied this receptor to visualize Hg²⁺ in live cells. Furthermore, a possible sensing model was established and rationalized with theoretical studies.

Hydroxychalcone dyes that serve as color indicators for pH and fluoride ions

A chalcone, which is composed of two aromatic rings bridged by an α,β-unsaturated carbonyl group, exhibits a variety of biological activities. With an objective to develop a novel chalcone-based functional dye, we have synthesized a chalcone diol CLN1, bearing two OH groups at the 2-positions on both phenyl rings, as well as reference compounds CLN2-6, and found that it serves as color indicators for pH and fluoride ions. CLN1 showed a vivid color change from colorless to yellow (halochromism) in water at pH ≥ 10. Furthermore, it presented a selective color change from colorless to red upon the addition of TBAF in an organic solvent such as CH3CN. CLN1 provided a strong red-shifted absorption band in the visible region under alkaline conditions in water and upon the addition of TBAF in CH3CN. The absorption spectral study together with TD-DFT calculations and X-ray crystallographic analysis revealed that the characteristic π-resonant structures of CLN1 caused by the ionization or OH-F- interactions and the planar conformation due to its intramolecular hydrogen bonding may provide a strong charge transfer (CT) absorption in the visible region.

New ferrocene-triazole derivatives for multisignaling detection of Cu2+ in aqueous medium and their antibacterial activity

Ferrocene-based naphthalene or quinoline receptors 1-4 linked by triazole were designed and synthesized. Their recognition properties of metal cations have been investigated systematically in aqueous environment. Upon addition 1 equiv. of Cu²⁺ ion, receptors 1 (C₂₃H₁₉FeN₃O) and 2 (C₂₂H₁₈FeN₄O) showed fluorescent turn-off, enhanced absorption and color variations. At the same time, receptor 1 also caused the perturbation of redox potential after addition 1 equiv. of Cu²⁺ ion. Therefore, receptors 1 and 2 behaved as naked-eye chemosensors and fluorescent probes for Cu²⁺ without interference by other ions and with low detection limit. In addition, receptor 1 could also be considered electrochemical sensor for Cu²⁺ having excellent sensitivity and selectivity. However, increasing the molecules flexibility resulted in the lower selectivity of ion recognition in the case of receptors 3 (C₂₄H₂₁FeN₃O) and 4 (C₂₃H₂₀FeN₄O). Furthermore, this series of compounds were nontoxicity and receptor 1 exhibited certain antibacterial activity.

Oxidation-Induced Differentially Selective Turn-On Fluorescence via Photoinduced Electron Transfer Based on a Ferrocene-Appended Coumarin-Quinoline Platform: Application in Cascaded Molecular Logic

Differentially selective molecular sensors that exhibit differential response toward multiple analytes are cost-effective and in high demand for various practical applications. A novel, highly differentially selective electrochemical and fluorescent chemosensor, 5, based on a ferrocene-appended coumarin-quinoline platform has been designed and synthesized. Our designed probe is very specific toward Fe³⁺ via a reversible redox process, whereas it detects Cu²⁺ via irreversible oxidation. Interestingly, it exhibits differential affinity toward the Cu⁺ ion via complexation. High-resolution mass spectrometry, ¹H NMR titration, and IR spectral studies revealed the formation of a bidentate Cu⁺ complex involving an O atom of the amide group attached to the quinoline ring and a N atom of imine unit, and this observation was further supported by quantum-chemical calculations. The metal binding responses were further investigated by UV-vis, fluorescence spectroscopy, and electrochemical analysis. Upon the addition of Fe³⁺ and Cu²⁺ ions, the fluorescence emission of probe 5 shows a "turn-on" signal due to inhibition of the photoinduced electron transfer (PET) process from a donor ferrocene unit to an excited-state fluorophore. The addition of sodium l-ascorbate (LAS) as a reducing agent causes fluorescence "turn off" for the Fe³⁺ ion because of reemergence of the PET process but not for the Cu²⁺ ion because it oxidizes the ferrocene unit to a ferrocenium ion with its concomitant reduction to Cu⁺, which further complexes with 5. Thermodynamic calculations using the Weller equation along with density functional theory calculations validate the feasibility of the PET process. A unique combination of Fe³⁺, LAS, and Cu²⁺ ions has been used to produce a molecular system demonstrating combinational "AND-OR" logic operation.

A fluorescent sensor for intracellular Zn2+ based on cylindrical molecular brushes of poly(2-oxazoline) through ion-induced emission

Poly(2-oxazoline) molecular brushes bearing enaminitrile receptors in the side chain ends exhibit good biocompatibility, excellent fluorescent selectivity for Zn²⁺, and possibility in detecting intracellular Zn²⁺.

A novel bimacrocyclic polyamine-based fluorescent probe for sensitive detection of Hg2+ and glutathione in human serum

Detection of glutathione in human serum is of great importance for clinical diagnosis of various diseases, such as AIDS, diabetes mellitus, Alzheimer disease and cancer. In this work, a new water-soluble bismacrocyclic polyamine-derived compound, namely L, which contains two molecules of 4-nitro-1,2,3-benzoxa-diazole as the fluorophores, was designed and prepared. The experiments of selectivity of L toward metal ions showed it could rapidly and sensitively detect Hg²⁺ with a detection limit of 27 nM. Furthermore, the cell imaging and co-staining experiments in HeLa cells demonstrated that the L-Hg²⁺ probe had selectivity for the Golgi apparatus to a certain degree. Moreover, it had excellent selectivity for biothiols, especially for glutathione. Finally, the probe was successfully applied to sensitively detect glutathione (GSH) in human serum and fetal bovine serum.

BODIPY-Derived Polymeric Chemosensor Appended with Thiosemicarbazone Units for the Simultaneous Detection and Separation of Hg(II) Ions in Pure Aqueous Media

Developing a simple and cheap analytical method for the selective detection and quantitative separation of toxic ions present in aqueous media is the biggest challenge faced by the chemosensing research community. Here, a 5,5-difluoro-1,3,7,9-tetramethyl-10-phenyl-5 H-dipyrrolo-diazaborinine-derived water-soluble polymer integrated with thiosemicarbazone units was rationally designed and synthesized for the simultaneous detection and separation of Hg(II) ions in pure aqueous solution. The water-soluble polymer scaffold poly( N, N'-dimethyl acrylamide- co-5,5-difluoro-1,3,7,9-tetramethyl-10-phenyl-5 H-dipyrrolo-diazaborinine-2-carbaldehyde) was synthesized by reversible addition-fragmentation chain transfer polymerization, followed by post-polymerization modification with thiosemicarbazide, leading to the formation of the target probe, P1. The nonemitting P1 exhibited bright yellow emission upon exposure to Hg(II) ions, with a limit of detection as low as 0.37 μM. This turn-on emission behavior triggered by Hg(II) ions might originate from the suppression of isomerization around the C═N bond of the thiosemicarbazone moiety caused by the formation of a coordination complex between P1 and Hg(II) ions. In addition, P1 displayed excellent selectivity toward Hg(II) ions over other metal cations. Finally, the selective removal of Hg(II) ions from an aqueous solution containing various metal ions was achieved by precipitation, which is probably caused by the fact that coordination complexes whereby Hg(II) ions acted as bridgeheads between P1 molecules had formed.

TDDFT study on aluminum and fluoride dual-sensing mechanism of a Schiff-Base sensor

The aluminum and fluoride dual-sensing mechanism of a previously reported sensor with a Schiff-base moiety (Spectrochim. Acta A, 2017, 183, 267-274) has been investigated by density functional theory (DFT) and time-dependent DFT (TDDFT) methods. The present calculations reproduce the photoproperties of the sensor as well as its aluminum and fluoride complexes, which illustrates that DFT and TDDFT constitute a reliable tool for uncovering detailed fluorescence-based sensing mechanisms in diverse electronic states. Theoretical results indicate that there are two OH⋯N hydrogen bonds in the sensor and two OH⋯F hydrogen bonds in its F¯ complex. Different degrees of coplanarity caused by these hydrogen bonds are responsible for their distinct absorption wavelengths. However, excited-state geometry optimization and a scan of the potential-energy surface show that there is twisted intramolecular charge transfer about the CN bond in the sensor molecule and an excited-state proton-transfer process from the fluoride anion to the neighboring N atom in the fluoride-sensor complex, whereby the fluorescence is quenched. A chelation-enhanced fluorescence effect associated with the aluminum-sensor complex shows a different excited-state process. The local excitation and emission occur exclusively within the planar fluorophore, and negligible structural change upon excitation of the aluminum-sensor complex leads to its strong fluorescence. Therefore, it is theoretically explained why the sensor may be successfully used to analyze the fluoride anion by absorption spectroscopy and the aluminum cation by emission spectroscopy.

Sensitive Water-Soluble Fluorescent Probe Based on Umpolung and Aggregation-Induced Emission Strategies for Selective Detection of Hg2+ in Living Cells and Zebrafish

Using Hg²⁺-induced umpolung reaction and aggregation induced emission (AIE), we have rationally developed a water-soluble fluorescent probe 2,2'-(((4-(4,5-bis(4-methoxyphenyl)-1-phenyl-1H-imidazol-2-yl)phenyl)methylene)bis(sulfanediyl))diethanol (MPIPBS) for Hg²⁺ detection. MPIPBS was found to have high selectivity and sensitivity toward Hg²⁺ detection. The mechanism of MPIPBS response to Hg²⁺ was verified by ¹H NMR titration, HPLC, and HRMS spectroscopy. The detection limit was examined to be 1.45 nM, which is lower than most reported probes for Hg²⁺. Taking advantage of excellent optical properties of AIEgen, a paper based sensor for Hg²⁺ detection was fabricated by immobilizing the MPIPBS on Waterman test paper. Meanwhile, MPIPBS showed satisfactory analytical performance in real water and urine samples. Further, thanks to the high water solubility, cell membrane permeability and low cytotoxicity, MPIPBS was further used to detect Hg²⁺ both in living cells and zebrafish. We anticipate that the prepared probe was available to detect Hg²⁺ in environment and biosamples.

Sequential displacement strategy for selective and highly sensitive detection of Zn2+, Hg2+ and S2- ions: An approach toward a molecular keypad lock

A thiocarbonohydrazone locked salicylidene based macrocycle ligand L has been synthesized and its ion sensing properties were examined by UV-visible and fluorescence spectroscopy. The macrocycle serves as a highly selective colorimetric sensor for Hg²⁺ ions while it acts as an excellent fluorescent sensor for Zn²⁺ ions by exhibiting a green fluorescence at 498 nm even in the presence of interfering ions. A detailed analysis of binding characteristics such as complex stoichiometry, association constant and detection limits of L toward Hg²⁺ and Zn²⁺ ions were evaluated by UV-visible and fluorescence experiments which revealed a stronger binding affinity and higher detection limit of L toward the mercury ions. Further, the sequential displacement strategy for the chromofluorogenic detection of Zn²⁺, Hg²⁺ and S^2- ions by ligand L, has been studied comprehensively. Finally, the ion-responsive fluorescence output signal of L were employed to design a molecular keypad lock which could be accessible by two users having two different set of chemical passwords (inputs) through distinguishable optical trajectories.

A quinoline-based fluorescent probe for selective detection and real-time monitoring of copper ions – a differential colorimetric approach

A quinoline moiety was used as a building block for designing a probe for the selective detection of copper ions in a partially aqueous medium.

A carbonothioate-based far-red fluorescent probe for the specific detection of mercury ions in living cells and zebrafish

A simple far-red fluorescent probe was developed to monitor mercury ions in environmental water samples and in living systems.

Metal-coordination driven intramolecular twisting: a turn-on fluorescent-redox probe for Hg2+ ions through the interaction of ferrocene nonbonding orbitals and dibenzylidenehydrazine

A unique C2 symmetric azine bridged bi-ferrocenyl receptor has been designed and synthesized for the selective detection of Hg²⁺ ion with a low detection limit as 15 nM via turn on fluorescence with a blue shift.

New Insights into the Configurations of Lead(II)-Benzohydroxamic Acid Coordination Compounds in Aqueous Solution: A Combined Experimental and Computational Study

Novel collector lead(II)-benzohydroxamic acid (Pb(II)–BHA) complexes in aqueous solution were characterized by using experimental approaches, including Ultraviolet-visible (UV-Vis) spectroscopy and electrospray ionization-mass spectrometry (ESI-MS), as well as first-principle density functional theory (DFT) calculations with consideration for solvation effects. The Job plot delineated that a single coordinated Pb(BHA)+ should be formed first, and that the higher coordination number complexes can be formed subsequently. Moreover, the Pb(II)–BHA species can aggregate with each other to form complicated structures, such as Pb(BHA)2 or highly complicated complexes. ESI-MS results validated the existence of Pb-(BHA)n=1,2 under different solution pH values. Further, the first-principles calculations suggested that Pb(BHA)+ should be the most stable structure, and the Pb atom in Pb(BHA)+ will act as an active site to attack nucleophiles. These findings are meaningful to further illustrate the adsorption mechanism of Pb(II)–BHA complexes, and are helpful for developing new reagents in mineral processing.