A Dual-Functional Luminescent MOF Sensor for Phenylmethanol Molecule and Tb3+ Cation

Naphthalene Tetrazole-Based Nickel Metal-Organic Framework as a Filler of Polycarbonate Membranes to Improve CO2 and H2 Separation

A tetrazole-naphthalene linker was used to prepare a nickel MOF (metal-organic framework) (NiNDTz) with interesting properties: a specific surface area SBET of 320 m2g-1 (SLangmuir 436 m2g-1), high thermal stability (Tdonset = 300 °C), and CO2 uptake of 1.85 mmolg-1, attributed to the tetrazole groups to be used as fillers in gas separation membranes. The role of these groups was crucial in the mechanical properties of mixed membranes prepared using polycarbonate as a polymer matrix, providing a very homogeneous filler distribution and also in the gas separation properties since a simultaneous increase in permeability and selectivity was achieved, especially in the hybrid membrane containing 20% filler (PC@NiNDTz-20%). This membrane exhibited an excellent balance between permeability (P) and selectivity (α) with an increase in the permeability of CO2 and H2, 177 and 185%, respectively, and improvements in the selectivity of these gases against greenhouse gases such as methane and ethylene (between 15 and 28% improvement). These results make this membrane competitive to deal with separations in which these gases are involved, and are of special interest for the H2/CH4 separation since it clearly improves the performance of pure PC and no better PC-based membranes have been reported in the literature for this separation.

Bacterial Cellulose-Based MOF Hybrid as a Sensitive Switch Off-On Luminescent Sensor for the Selective Recognition of l-Histidine

In this study, a stable and luminescent UiO-66-NH2 (UN) and its derivative Cu2+@UN were prepared and utilized successfully as an Off-On luminescent sensing platform for effective, selective, as well as rapid (5 min) detection of l-Histidine (l-His). The UN reveals efficient quenching in the presence of Cu2+ ions through photoinduced electron transition (PET) mechanism as a dynamic quenching process (in the range of 0.01-1 mM) forming Cu2+@UN sensing platform. However, due to the remarkable affinity between l-His and Cu2+, the luminescence of Cu2+@UN is recovered in the presence of l-His indicating Turn-On behavior via a quencher detachment mechanism (QD). A good linear relationship between the l-His concentration and luminescence intensity was observed in the range of 0.01-40 μM (R2 = 0.9978) with a detection limit of 7 nM for l-His sensing. The suggested method was successfully utilized for l-His determination in real samples with good recoveries and satisfying consequences. Moreover, the result indicates that only l-His induces a significant luminescence restoration of Cu2+@UN and that the signal is significantly greater than that of the other amino acids. Also, the portable test paper based on bacterial cellulose (BC) as the Cu2+@UNBC sensing platform was developed to conveniently evaluate the effective detection of l-His.

Seven Ln(III) coordination polymers with two kinds of geometric coordination but the same 3D topological property: luminescence sensing and magnetic property

Two series of seven lanthanide metal coordination polymers (Ln-CPs) formulated as {[Ln(dttpa)_1.5(H₂O)₂]·H₂O}_n [Ln = La³⁺ (1), Ce³⁺ (2), Nd³⁺ (3), Sm³⁺ (4) and Eu³⁺ (5)] and {[Ln (dttpa)_1.5(H₂O)]·xH₂O}_n [Ln = Tb³⁺ (6) and Er³⁺ (7), x = 0.75] have been successfully constructed using Ln³⁺ ions and 2,5-di(1H-1,2,4-triazol-1-yl)terephthalic acid (H₂dttpa) via a hydrothermal method. Their 3D structures are fully characterised by Fourier transform infrared (FT-IR) spectroscopy, X-ray single-crystal analyses, powder diffraction analyses (PXRD), elemental analyses (EAs) and thermogravimetric analyses (TGAs). All Ln-CPs display the same topological property with the point symbol of {4²·8⁴}{4⁴·6²}₂{4⁹·6⁶}₂, and crystallize in the triclinic space group P1̄. Interestingly, Eu-CP (5) effectively sensitizes the visible emission of Tb³⁺ and shows high selectivity and stable response with the lowest detection limit of 9.88 nM. Furthermore, Tb-CP (6) acts as a good luminescence sensor to detect nitrobenzene (NB) with a detection limit of 12.5 nM. In addition, the magnetic susceptibility measurement for Er-CP (7) further shows that compounds constructed by dttpa^2- are a kind of promising functional material.

A robust 3D zinc(II)-organic framework for efficient dual detection of acetylacetone and Tb3+ ions

There has been broad attention to the recognition and detection of ions and organic small molecules due to their essential roles in environmental systems. However, dual-functional probes have seldom been developed for sensing organic constituents and lanthanide ions. A new 3D pillared Zn(ii)-organic framework [Zn3(L)(DCTP)3]n (1) (L = 1,4-di(1H-benzo[d]imidazol-2-yl)butane and H2DCTP = 2,5-dichloroterephthalic acid) was hydrothermally synthesized and structurally characterized, and features a unique 3D 4,4,4,6-connected framework containing approximately 9.99 × 9.78 Å2 cubic channels. 1 displays excellent thermal and pH stability and can act as a novel "turn-on" fluorescent probe for highly selectively sensitizing Tb3+ ions through an "antenna effect". Furthermore, 1 is a dual-response fluorescent sensor for monitoring acetylacetone and Tb3+ ions with rapid response times (within 1 min), low limits of detection (LOD) (5.02 × 10-6/1.15 × 10-8 M, separately) and great anti-interference ability and recyclability towards the analytes. The related sensing mechanisms for detecting analytes are also investigated in detail.

Fluorescent sensors for aldehydes based on luminescent metal-organic frameworks

Volatile aldehydes cause great harm to human health and the living environment, and the detection of aldehydes has attracted much attention from chemists and material scientists. In recent years, as one of the most promising classes of functional materials, luminescent metal-organic frameworks (LMOFs) have bloomed as fluorescent sensors for the detection of aldehydes. Herein, the sensing properties of LMOF sensors toward formaldehyde, benzaldehyde, acetaldehyde and other aldehydes have been reviewed, and the sensing mechanism and applications are also illustrated. Additionally, the current status and its potential development prospects in this field are outlined.

Efficient photocatalytic degradation of methyl violet using two new 3D MOFs directed by different carboxylate spacers

Both the MOFs proved to be good candidates for the photocatalytic degradation of methyl violet. The mechanism of these photocatalytic degradations is discussed.

Pore-Functionalized and Hydrolytically Robust Cd(II)-Metal-Organic Framework for Highly Selective, Multicyclic CO2 Adsorption and Fast-Responsive Luminescent Monitoring of Fe(III) and Cr(VI) Ions with Notable Sensitivity and Reusability

Metal-organic frameworks (MOFs) show a distinctive pre-eminence over other heterogeneous systems for adsorption of carbon dioxide (CO₂) gas and fluorescence detection of water contaminating ions, where integration of both these attributes along with enhancement of pore functionality and water stability is crucial for potential applications related to environmental remediation. Pore functionalization has been achieved in a 2-fold interpenetrated, mixed-ligand Cd(II)-framework [Cd_1.5(L)₂(bpy)(NO₃)]·2DMF·2H₂O (CSMCRI-5) (HL = 4-(4-carboxyphenyl)-1,2,4-triazole, bpy = 4,4'-bipyridine, DMF = dimethylformamide, CSMCRI = Central Salt & Marine Chemicals Research Institute) by utilizing a bifunctional ligand HL. The bpy-pillared framework, containing diverse Cd(II) nodes, optimum sized voids, and free N-atom affixed one-dimensional porous channels, shows notable structural robustness in diverse organic solvents and water. In spite of a negligible surface area, the activated MOF (5a) exhibits good CO₂ uptake and highly selective CO₂ adsorption over N₂ (259.94) and CH₄ (14.34) alongside minor loss during multiple CO₂ adsorption-desorption cycles. Luminescence studies demonstrate extremely selective and ultrafast sensing of Fe³⁺ ions in the aqueous phase with notable quenching (1.13 × 10⁴ M^-1) as well as an impressive 98 ppb limit of detection (LOD). Importantly, Fe³⁺ detection is exclusively retained under simulated physiological conditions. The framework further serves as a quick-responsive scaffold for toxic CrO₄^2- and Cr₂O₇^2- anions, where individual quenching constants (CrO₄^2-: 1.73 × 10⁴ M^-1; Cr₂O₇^2-: 5.42 × 10⁴ M^-1) and LOD values (CrO₄^2-: 280 ppb; Cr₂O₇^2-: 320 ppb) rank among the best sensory MOFs for aqueous phase detection of Cr(VI) species. It is imperative to stress vivid monitoring of all these aqueous pollutants by a handy paper-strip method, besides outstanding applicability of 5a toward their recyclable detection. Mechanism of selective quenching is comprehensively investigated in light of the absorption of the excitation/emission energy of the host framework by an individual studied analyte.

Five water-stable luminescent CdII-based metal–organic frameworks as sensors for highly sensitive and selective detection of acetylacetone, Fe3+ and Cr2O72− ions

Five Cd^II-based MOFs with different topologies were prepared, in which 2 and 3 are rare examples which display excellent sensitivity, selectivity, recyclability and structural stability for detection of acac/Fe³⁺ and acac/Cr₂O₇²⁻, respectively.

Three water-stable luminescent two-dimensional CdII-based coordination polymers as sensors for highly sensitive and selective detection of Cr2O72− and CrO42− anions

Three 2D Cd^II-CPs with different topologies were prepared, in which 1 and 3 are rare examples which display excellent sensitivity, selectivity, recyclability and structural stabilities for the detection of Cr₂O₇²⁻/CrO₄²⁻.

Three AIE-ligand-based Cu(i) coordination polymers: synthesis, structures and luminescence sensing of TNP

Cu(i) CPs were constructed for the first time with the AIE ligand DPMF; they exhibited distinct architectures and efficient detection of TNP.

A white-light-emitting lanthanide metal–organic framework for luminescence turn-off sensing of MnO4− and turn-on sensing of folic acid and construction of a “turn-on plus” system

A white-light-emitting lanthanide MOF shows recyclable and dual-responsive sensing for MnO₄⁻ and folic acid in an aqueous system with high selectivity and sensitivity.

New two-dimensional Cd(ii) coordination networks bearing benzimidazolyl-based linkers as bifunctional chemosensors for the detection of acetylacetone and Fe3+

Two new CPs, namely {[Cd(L)(1,4-PDA)]·0.7(C₂H₅OH)}_n (1) and {[Cd(L)_0.5(1,8-NDC)·H₂O]}_n (2) were fabricated. 1 shows a sql 2D network. 2 shows a 2D 3,4L83 network. Both 1 and 2 were highly selective and sensitive fluorescent chemosensors toward acetylacetone and Fe³⁺.

A Zn(ii) metal-organic framework based on bimetallic paddle wheels as a luminescence indicator for carcinogenic organic pollutants: phthalate esters

Based on the multifunctional ligand 3-(1H-1,2,4-triazol-1-yl)isophthalic acid (H2TIA), a three-dimensional coordination polymer, namely {[Zn(TIA)]·DMA} n (Zn-1) was synthesized solvothermally. Single-crystal X-ray diffraction analyses confirmed that Zn-1 is a 3D framework composed of binuclear Zn2 paddle wheels with one-dimensional channels long the a direction. Further topological analyses revealed that MOF Zn-1 existed as a (3,6)-connected rtl binodal net {4·62}2{42·610·83}. Furthermore, the luminescence explorations indicate that complex Zn-1 is the first MOF for luminescent probing of phthalate esters (carcinogenic organic pollutants) with a high quenching-efficiency constant and low fluorescence-detection limit.

Two metal–organic zeolites for highly sensitive and selective sensing of Tb3+

Two metal–organic zeolites can sensitize the luminescence of the Tb³⁺ ion by energy transfer between the host frameworks and the guest Tb³⁺ ion, thus serving as Tb³⁺ ion sensors.

Molecular tectonics: homochiral 1D and 2D cadmium based coordination networks

By combining enantiomerically pure tectons with Cd(NO₃)₂, a series of six new homochiral luminescent coordination networks are formed. The dimensionality and crystal packing of the latter are modulated by both the nature of the chiral side chains and the crystallization solvents.

A three-dimensional Cd(ii) metal–organic framework: a bifunctional luminescence sensor for benzaldehyde and Fe2+ ions

A three-dimensional Cd(ii) MOF has been constructed. It is (3,6)-connected net showing rtl topology. In addition, it is also a bifunctional luminescence sensor for benzaldehyde and Fe²⁺ ions.

Two mixed-ligand Cd(ii)–organic frameworks with unique topologies: selective luminescence sensing of TNP and Cu2+ ions with recyclable performances

Two luminescent Cd(ii)–organic frameworks exhibit unprecedented (4,4,5,5)-c and (4,4,4,6,7)-c topologies, and highly sensitive and selective sensing of 2,4,6-trinitrophenol and Cu²⁺.

Two triphenylamine-based luminescent metal–organic frameworks as a dual-functional sensor for the detection of nitroaromatic compounds and ofloxacin antibiotic

Two solvent-induced luminescent MOFs have been synthesized and MOF1 can be employed as a dual-functional fluorescence sensor for nitroaromatics and antibiotics.