Wheel-like Ln18 Cluster Organic Frameworks for Magnetic Refrigeration and Conversion of CO2

Cl--templated coordination polymers constructed from dragonfly-like Ln4 clusters exhibiting excellent magnetothermal properties

Lanthanide clusters with high magnetic entropy and an exquisite structure have always been a hot research direction. Herein, two delicately structured lanthanide clusters were synthesized using isonicotinic acid (HIN) as a ligand by the solvothermal method, namely {[Gd4(IN)4(μ3-OH)4(OAc)2(H2O)6]·Cl2·7H2O}n (1) and {[Dy4(IN)4(μ3-OH)4(OAc)2(H2O)6]·Cl2·8H2O}n (2). Structural analysis indicates that the two compounds exhibit comparable structures, and both have the same cubane-like Ln4 metal skeleton and form an interesting dragonfly molecular configuration by connecting to HIN. Moreover, {Ln4} serves as the fundamental structural unit for the construction of a 1D channel of 1, with a diameter of approximately 10.08 Å, which is connected to each other by extra {Ln4} units to form an exquisite porous 3D structure of 1. Cl- exists as an anion-template in its 3D structure, balancing the charge and maintaining its structural stability. Magnetic measurements indicate that 1 exhibits a rather satisfactory magnetic entropy change, reaching a maximum value of -ΔSmaxm = 31.59 J kg-1 K-1 at 2 K for ΔH = 7 T.

Polymorphism and Its Influence on Catalytic Activities of Lanthanide-Glutamate-Oxalate Coordination Polymers

To study the relationship between polymorphism and catalytic activities of lanthanide coordination polymers in the cycloaddition reactions of CO2 with epoxides, the monoclinic and triclinic polymorphs of [LnIII(NH3-Glu)(ox)]·2H2O, where LnIII = LaIII (I), PrIII (II), NdIII (III), SmIII (IV), EuIII (V), GdIII (VI), TbIII (VII), and DyIII (VIII), NH3-Glu- = NH3+ containing glutamate, and ox2- = oxalate, were synthesized and characterized. Factors determining polymorphic preference, the discrepancy between the two polymorphic framework structures, potential acidic and basic sites, thermal and chemical stabilities, active surface areas, void volumes, CO2 sorption/desorption isotherms, and temperature-programmed desorption of NH3 and CO2 are comparatively presented. Based on the cycloaddition of CO2 with epichlorohydrin in the presence of tetrabutylammonium bromide under solvent-free conditions and ambient pressure, catalytic activities of the two polymorphs were evaluated, and the relationship between polymorphism and catalytic performances has been established. Better performances of the monoclinic catalysts have been revealed and rationalized. In addition, the scope of monosubstituted epoxides was experimented and the outstanding performance of the monoclinic catalyst in the cycloaddition reaction of CO2 with allyl glycidyl ether under ambient pressure has been disclosed.

Reversible single-crystal-to-single-crystal transition in Gd(III) metal-organic frameworks induced by heat and solvents with a significant magnetocaloric effect

The design and synthesis of a Gd(III) metal-organic framework with the formula [Gd4(BTDI)3(DMF)4]n (JXUST-40, H4BTDI = 5,5'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)diisophthalic acid) are reported hererin. Interestingly, a reversible single-crystal-to-single-crystal transition between JXUST-40 and {[Gd4(BTDI)3(H2O)4]·6H2O}n (JXUST-40a) was achieved under the stimulation of heat and solvents. Both JXUST-40 and JXUST-40a exhibited good stability when soaked in common solvents and aqueous solutions with pH values of 1-12. Magnetic studies showed that JXUST-40a has a larger magnetocaloric effect with -ΔSmaxm = 26.65 J kg-1 K-1 at 2 K and 7 T than JXUST-40 due to its larger magnetic density. Structural analyses indicated that the coordinated solvent molecules play a crucial role in the coordination environment around the Gd(III) ions and the change in the framework, ultimately leading to the changes in the pore size and magnetism between JXUST-40 and JXUST-40a. In addition, both isomorphic [Dy4(BTDI)3(DMF)4]n (JXUST-41) and {[Dy4(BTDI)3(H2O)4]·6H2O}n (JXUST-41a) displayed slow magnetic relaxation behaviour.

Influence of proton irradiation on the magnetic properties of two-dimensional Ni(II) molecular magnet

The influence of 1.9 MeV proton irradiation on structural and magnetic properties has been explored in the two-dimensional (2D) NiSO4(1,3-phenylenediamine)2 coordination ferrimagnet. The X-ray powder diffraction and IR spectroscopy revealed that the octahedrons with Ni ion in the center remain unchanged regardless of the fluence a sample received. In contrast, proton irradiation greatly influences the hydrogen bonds in the flexible parts in which the 1,3-phenylenediamine is involved. Dc magnetic measurements revealed that several magnetic properties were modified with proton irradiation. The isothermal magnetization measured at T = 2.0 K varied with the proton dose, achieving a 50% increase in magnetization in the highest measured field µ0Hdc = 7 T or a 25% decrease in remanence. The most significant change was observed for the coercive field, which was reduced by 90% compared to the non-irradiated sample. The observed results are accounted for the increased freedom of magnetic moments rotation and the modification of intralayer exchange couplings.

Synthesis, structures and magnetic studies of hexanuclear lanthanide complexes: SMM behavior of the DyIII analogue and MCE properties of the GdIII analogue

The synthesis, structure and magnetic properties of homometallic hexanuclear lanthanide complexes [Ln6(HL)4(tfa)4(S)2]·2NO3·x H2O·yMeOH (1, Ln = Gd, S = MeOH, x = 0, y = 0; 2, Ln = Tb, S = H2O, x = 2, y = 2; 3, Ln = Dy, S = MeOH, x = 0, y = 2; 4, Ln = Er, S = MeOH, x = 0, y = 2). [(H4L) = 6-((bis(2-hydroxyethyl)amino)-N'-(2-hydroxybenzylidene)picolinohydrazide) (tfa = trifloroacetylacetone)] are reported. These hexanuclear assemblies are made up of two trinuclear triangular sub-units linked through the oxygen atoms of two phenoxide bridging groups in a corner sharing arrangement. Magnetic studies reveal that 1 displays a magnetocaloric effect with a maximum value of -ΔSm = 21.03 J kg-1 K-1 at T = 3 K and under an applied field change ΔB = 5 T. Complex 3 shows slow relaxation of magnetization even under zero applied field although a clear maximum in the ac susceptibility plots cannot be seen. However, under an optimal applied field of 0.2 T, clear maxima are observed in the out-of-phase (χ''M) component of the ac susceptibility in the temperature range 3.5 K (2 kHz) to 10.5 K (10 kHz). The temperature dependence of the relaxation times could be fitted to the sum of Orbach, Raman and QTM relaxation processes affording the following parameters: τo = 3.4(9) × 10-8 s, Ueff = 94(2) K, BRaman = 16.43(1) K-n s-1, n = 3.2(3) and τQTM = 0.0044(3) s. 4, under an applied magnetic field of 0.2 T, shows slow relaxation of magnetization through a thermally activated Orbach process with Ueff = 18.2(9) K and τo = 3.5(3) × 10-8 s.

Two novel Ln8 clusters bridged by CO32- effectively convert CO2 into oxazolidinones and cyclic carbonates

It is difficult and challenging to design and construct high-nuclearity Ln(III)-based clusters due to the high coordination numbers and versatile coordination geometries of Ln(III) ions. Herein, two novel octanuclear Ln(III)-based clusters [Ln₈(H₂L^-)₄(HL^2-)₄(NO₃)₆ (CO₃)₂](NO₃)₂·2CH₃CN (Ln = Nd (1) and Sm (2)) have been synthesized under solvothermal conditions. The X-ray single analysis reveals that both 1 and 2 are octanuclear structures and the eight central Ln(III) ions are bridged by two CO₃^2- anions. Catalytic study revealed that 1 and 2 can effectively catalyze the cycloaddition reaction of CO₂ and aziridines or epoxides simultaneously under mild conditions. What is more, cluster 1, as a heterogeneous catalyst, can be reused at least three times without obvious loss in catalytic activity for coupling of CO₂ and epoxides. To our knowledge, cluster 1 is the first Ln(III)-based cluster catalyst used for the conversion of CO₂ with aziridines or epoxides simultaneously. This work provides a successful strategy to integrate high-nuclear Ln(III)-based clusters for CO₂ conversion, which may open a new space for the construction of multifunctional high-nuclear Ln(III)-based clusters as efficient catalysts for CO₂ conversion.

Lanthanide molecular cluster-aggregates as the next generation of optical materials

In this perspective, we provide an overview of the recent achievements in luminescent lanthanide-based molecular cluster-aggregates (MCAs) and illustrate why MCAs can be seen as the next generation of highly efficient optical materials. MCAs are high nuclearity compounds composed of rigid multinuclear metal cores encapsulated by organic ligands. The combination of high nuclearity and molecular structure makes MCAs an ideal class of compounds that can unify the properties of traditional nanoparticles and small molecules. By bridging the gap between both domains, MCAs intrinsically retain unique features with tremendous impacts on their optical properties. Although homometallic luminescent MCAs have been extensively studied since the late 1990s, it was only recently that heterometallic luminescent MCAs were pioneered as tunable luminescent materials. These heterometallic systems have shown tremendous impacts in areas such as anti-counterfeiting materials, luminescent thermometry, and molecular upconversion, thus representing a new generation of lanthanide-based optical materials.

Two Windmill-Shaped Ln18 Nanoclusters Exhibiting High Magnetocaloric Effect and Luminescence

The self-assembly of the high-nuclearity Ln-exclusive nanoclusters is challenging but of significance due to its aesthetically pleasing architectures and far-reaching latent applications in magnetic cooling technologies. Herein, two novel high-nuclearity lanthanide nanoclusters were successfully synthesized under solvothermal conditions, formulated as {[Gd₁₈(IN)₂₀(HCOO)₈(μ₆-O)(μ₃-OH)₂₄(H₂O)₄]·4H₂O}_n and {[Eu₁₈(IN)₁₆(HCOO)₈(CH₃COO)₄(μ₆-O)(μ₃-OH)₂₄(H₂O)₄]·5H₂O}_n (abbreviated as Gd₁₈ and Eu₁₈, HIN = isonicotinic acid). Both of them possess novel and exquisite windmill-shaped cationic cores in the family of high-nuclearity Ln-exclusive nanoclusters. Remarkably, the adjacent second building units are interconnected into a three-dimensional (3D) metal-organic framework by IN^- ligands. As expected, the abundant existence of Gd^III ions endows Gd₁₈ with a favorable magnetic entropy change at 2.0 K for ΔH = 7.0 T (-ΔS_m^max = 40.0 J kg^-1 K^-1), and Eu₁₈ displays the typical luminescence of Eu^III ions.

Rotating magnetocaloric effect in highly anisotropic TbIII and DyIII single molecular magnets

The magnetocaloric effect (MCE) was investigated in highly anisotropic single crystals of two single molecule magnets (SMMs): [Ln^III(Zn^IIL)₂]CF₃SO₃, where Ln = Tb, Dy and L = tripodal hexadentate Schiff base ligand. The structure of these paramagnetic compounds consists of identically oriented linear trinuclear clusters in a trigonal system with an easy direction c∥Zn-Ln-Zn array and a hard plane ab⊥Zn-Ln-Zn array. The magnitude of MCE measured for c∥H was significantly greater than MCE for ab∥H at a wide temperature range regardless of the studied SMM. Therefore, the rotating magnetocaloric effect (RMCE) was evaluated. The maxima of the magnetic entropy change for RMCE were obtained at 2.0 K and moderate fields: 3.9 J K^-1 kg^-1 at µ₀H = 1.3 T for Ln = Tb and 3.3 J K^-1 kg^-1 at µ₀H = 1.1 T for Ln = Dy. The relative efficiency of RMCE compared to the MCE measured in c∥H was as high as 99% at low magnetic fields.

Self-assembly of octanuclear Ln(III)-based clusters: their large magnetocaloric effects and highly efficient conversion of CO2

The design and construction of high-nuclear lanthanide clusters with fascinating topology and functional properties have been an active area of research, however, the development of an effective approach for obtaining high-nuclear lanthanide clusters with multifunctional properties is still extremely difficult. Up to now, a systematic approach for guiding the further expansion of Ln(III)-based clusters showing good functional properties is lacking. Herein, we design and synthesize a polydentate Schiff base ligand (HL), which reacts with β-diketonate salts Ln(acac)₃·2H₂O, and a series of Ln₈ clusters [Ln₈(acac)₆(L)₂(μ₃-O)₆(μ₂-C₂H₅O)₄(μ₂-Hacac)₂]·2CH₃CN (Ln(III) = Gd (1), Dy (2), and Ho (3); HL = pyridine-2-carboxylic acid (5-hydroxymethyl-furan-2-ylmethylene)-hydrazide, Hacac = acetylacetone) have been successfully synthesized. Single-crystal X-ray diffraction studies reveal that clusters 1-3 are isostructural and can be viewed as a Ln₈ core bridged by eighteen μ₂-O atoms, six μ₃-O atoms and two μ₄-O atoms. Magnetic studies show that cluster 1-Gd8 displays a large magnetocaloric effect with -ΔS_m = 46.14 J kg^-1 K^-1 (T = 2.0 K and ΔH = 7.0 T); cluster 2-Dy8 exhibits single-molecule magnet behavior under zero-field conditions. It is worth mentioning that the -ΔS_m of cluster 1-Gd8 is larger than that of most reported polynuclear Gd(III)-based clusters; the 2-Dy8 cluster is one of the rare polynuclear Ln_n SMMs (n ≥ 8) under zero dc field. Importantly, these Ln(III)-based clusters (1-3) can catalyze the cycloaddition of CO₂ with epoxides with high efficiency under mild conditions; and cluster 1-Gd8 as a catalyst could be reused at least three times without obvious loss of catalytic performance.

Magnetic cooling: a molecular perspective

The magnetocaloriceffect is considered as an energy-efficient and environmentally friendly technique which can take cooling technology to the next level. Apart from its commercial application at room temperature, magnetic refrigeration is an up-and-coming solution for the cryogenic regime, especially as an alternative to He³ systems. Molecular magnets reveal advantageous features for ultra-low cooling which are competitive with intermetallic and lanthanide alloys. Here, we present a guide to the current status of magnetocaloric effect research of molecular magnets with a theoretical background focused on the inverse magnetocaloric effect and an overview of recent results and developments, including the rotating magnetocaloric effect.

Highly sensitive sensing device based on highly luminescent lanthanide nanocluster for biomarker in human urine and serum

The level of L-kynurenine (L-kyn) can reflect the health state of human body, and the determination of L-kyn can be used for the medical diagnosis of several cancers and neurological diseases. In this work, a series of air-, water-, and thermo-stable dinuclear lanthanide nanoclusters [Ln₂(2,5-DFBA)₆(phen)₂] (Tb 1, Eu 2, Gd 3, 2,5-DFBA = 2,5-difluorobenzoic acid, phen = 1,10-phenanthroline) are obtained by a facial method. 1 and 2 show very high luminescence quantum yields (QYs) of 71.7% and 81.8%, respectively. Interestingly, investigation reveals that 1 is a quick, highly sensitive and selective sensor for L-kyn in real samples of urine and serum. Furthermore, transmission electron microscope (TEM) results reveal that nanocluster 1 is stable in solution and can be uniform distributed on the base, suggesting it can be deposited on various supports to fabricate sensing devices. Thus, 1 is fabricated into a sensitive test paper for the eye-readable detection of L-kyn in real samples of human urine and serum. The limit of detection (LOD) as low as 0.3 μM, which is enough to rapidly determine L-kyn in human body liquor (usually 5 μM in healthy human body).

Magnetocaloric effect and slow magnetic relaxation in peroxide-assisted tetranuclear lanthanide assemblies

Investigation of a series of rare peroxide-assisted tetranuclear lanthanide assemblies revealed both significant magnetocaloric effect and slow magnetic relaxation.

Wheel-like Gd42 Polynuclear Complex with Significant Magnetocaloric Effect

Two novel wheel-like lanthanide nanoclusters with 42 nuclearity [Ln42L14(OH)28(OAc)84] (abbreviated as Ln42, 1-Gd; 2-Dy, HL=3-methoxysalicylaldehyde O-vanillin) were structurally and magnetically characterized. The Ln42 species were constructed by O-vanillin and lanthanide...

Novel 2D isomorphic lanthanide complexes based on a bifunctional 5-(pyridin-3-yloxy)isophthalic acid: synthesis, structure, fluorescence and magnetic properties

The Tb(iii)-complex can be used as a multifunctional luminescent sensor presenting visual quenching responses towards acetone, Fe3+ and CrO42− in aqueous solution with high sensitivity and low detection limits.

Efficiently increasing low-field magnetic entropy by incorporating SO32− into Gd22Ni21 clusters

One distinct nanosized cluster, Gd22Ni21, was isolated by the mixed-anion-templates (SO32- and SO42-), which was firstly reported in 3d-4f metal clusters. Additionally, Gd22Ni21 shows the largest low-field magnetic entropy change...

Gd(III)-based metal-organic frameworks and coordination polymers for magnetic refrigeration

As the alternatives of expensive and increasingly shortage 3He for ultralow-temperaturerefrigeration, molecule-based magnetorefrigerant materials have attracted much attention in the past decades. Among them, Gd(III)-based metal-organic frameworks and coordination polymers...

Four Inorganic-Organic Hybrid Borates: From 2D Layers to 3D Oxoboron Cluster Organic Frameworks

Four inorganic-organic hybrid borates, K[B₆O₉(OH)(en)]·H₂O (1, en = ethylenediamine), K[B₆O₉(OH)(1,3-dap)]·H₂O (2, 1,3-dap = 1,3-diaminopropane), K[B₆O₉(OH)(1,6-dah)_0.5]·H₂O (3, 1,6-dah = 1,6-diaminlhexane) and [(1,3-dap)Cd@B₅O₈(OH)]·0.5H₂O (4), were made under solvothermal conditions. 1 and 2 are isostructural and feature a 2D layer built by B₆O₉(OH) clusters and modified by en and 1,3-dap via B-N-C linkages. By replacing en and 1,3-dap with longer and more flexible 1,6-dah, a new type of oxoboron cluster organic framework 3 was obtained, which was composed of the same B₆O₉(OH) cluster layers as in 1 and 2 and 1,6-dah linkers. By replacing alkali metal K with transition metal Cd under similar synthetic conditions, another type of oxoboron cluster organic framework 4 was made in which the Cd-centered wheel cluster layers and 1,3-dap linkers were connected via Cd-N-C linkages.

A Series of High-Nuclear Gadolinium Cluster Aggregates with a Magnetocaloric Effect Constructed through Two-Component Manipulation

The serialized expansion of high-nuclear clusters usually includes the controlled variable method and changes only a single variable. However, changing both variables will greatly increase the complexity of the reaction simultaneously. Therefore, the use of a two-component regulation reaction is rare. Herein, we used a diacylhydrazone ligand (H₄L¹) with multidentate chelating coordination sites for the reaction with Gd(NO₃)₃·6H₂O under solvothermal conditions to obtain an example of 16-nucleus disc-shaped cluster 1 with a brucite structure. The overall structure of cluster 1 can be regarded as an equilateral triangle, which is formed by three (L¹)^4- ions that can be regarded as "sides" and wrap the four-layer metal center Gd(III) ions. Notably, upon simultaneous regulation of the substituent of the ligand and the coordination anion, heptanuclear gadolinium cluster 2 was obtained. Cluster 2 can be regarded as a butterfly structure, which was formed by connecting two Gd₃L² molecules that were not in the same plane and through the central Gd(III) ion as an intersection. Moreover, hexanuclear gadolinium cluster 3 was obtained by changing the ligand substituent and adding an auxiliary ligand. Cluster 3 can be regarded as a chair structure, which was composed of two molecules of diacylhydrazone ligand (L²)^4- wrapping vacant cubane shared by four vertices. This study was the first to construct a series of high-nuclear gadolinium clusters through two-component regulation manipulation. The study of the magnetocaloric effect showed that the maximum values of -ΔS_m for clusters 1-3 were 34.05, 29.04, and 24.32 J kg^-1 K^-1, respectively, when T = 2 K and ΔH = 7 T.

A new family of boat-shaped Ln8 clusters exhibiting the magnetocaloric effect and slow magnetic relaxation

Designing and synthesizing lanthanide clusters have always been a research hotspot. Herein, three lanthanide clusters with the formula [Ln₈(IN)₁₄(μ₃-OH)₈(μ₂-OH)₂(H₂O)₈]·xH₂O (Ln = 1-Gd and x = 11; Ln = 2-Dy and x = 8; Ln = 3-Eu and x = 8) have been isolated in the presence of isonicotinic acid under solvothermal conditions. Structural analysis indicates that those three compounds are isostructural, featuring boat-shaped {Ln₈} metal frameworks. Magnetic measurements reveal that 1-Gd exhibits a larger MCE with the maximum -ΔS_m value of 31.77 J kg^-1 K^-1 at 2 K for ΔH = 7 T, while 2-Dy displays slow magnetization relaxation. Besides, the photoluminescence properties of 3-Eu were investigated.

Molecular assemblies from linear-shaped Ln4 clusters to Ln8 clusters using different β-diketonates: disparate magnetocaloric effects and single-molecule magnet behaviours

A series of tetranuclear lanthanide-based clusters [Ln₄(dbm)₆(L)₂(CH₃OH)₄]·2CH₃OH (Ln(III) = Gd (1), Dy (2), and Ho (3); H₃L = 2-[(2-(hydroxyimino)propanehydrazide)methyl]-2,3-dihydroxybenzaldehyde, Hdbm = dibenzoylmethane) and octanuclear lanthanide-based clusters [Ln₈(HL)₁₀(CH₃O)₄(CH₃OH)₂]·6CH₃OH (Ln(III) = Gd (4), Dy (5)) were assembled using a polydentate Schiff-base ligand H₃L and two different β-diketone salts via a solvothermal method, and their structures and magnetic properties have been characterized. Interestingly, β-diketones play an important role in assembling and affecting the structures of Ln₄ to Ln₈ clusters. This is the first use of β-diketone to affect the structures of polynuclear Ln(III)-based clusters from linear-shaped Ln₄ clusters to Ln₈ clusters. Magnetic studies revealed that antiferromagnetic interactions exist in clusters 1-Gd4 and 4-Gd8. More importantly, clusters 1-Gd4 and 4-Gd8 display significant cryogenic magnetic refrigeration properties (-ΔS_m = 24.88 J kg^-1 K^-1 for 1-Gd4 and -ΔS_m = 32.52 J kg^-1 K^-1 for 4-Gd8); the results show that cluster 4-Gd8 exhibits a larger magnetocaloric effect than 1-Gd4. Cluster 2-Dy4 shows remarkable single-molecule magnet (SMM) behavior (ΔE/k_B = 67.5 K and τ₀ = 3.06 × 10^-7 s) under a zero dc field, and 5-Dy8 exhibits a field-induced SMM-like behavior (ΔE/k_B = 39.83 K and τ₀ = 2.12 × 10^-7 s) under a 5000 Oe dc field.

Real-time and visual sensing devices based on pH-control assembled lanthanide-barium nano-cluster

Real-time and visual monitoring of pollutants in the air is of great importance since they are usually cannot be seen, smelled, or touched. Lanthanide nano-cluster is a kind of luminescent sensor for various species. However, controlling synthesis of lanthanide nano-cluster remains experimentally challenging. In this work, four series of lanthanide-barium (Ln-Ba) nano-clusters of Dy₂Ba (1), Tb₂Ba₂ (2), Ln₄Ba₃ (Ln = Tb, 3a; Eu, 3b), Tb₄Ba₄ (4) were assembled through precisely controlling the pH of the reactant solutions. The work features the first example that the number of cluster's nuclei changes regularly with the pH. Moreover, investigation reveals that nano-cluster 3a is a highly selective and sensitive sensor towards acetylacetone (acac) and aniline. Interestingly, easy-to-use sensing devices of test paper, agarose gel, and five kinds of film on CaCO₃, polyfoam, coin, mask, and wall that based on 3a were fabricated by facile methods. The seven sensing devices showed remarkable ability to sense aniline and acac vapors with visibility to the naked eyes. This is the first work on multiple real-time and visual sensing devices based on the lanthanide nano-cluster.

Double-Propeller-like Heterometallic 3d-4f Clusters Ln18Co7

Two high-nuclearity lanthanide-transition metal clusters with the general formula [Ln₁₈Co^IICo^III₆(OH)₁₄(CO₃)₉(CH₃CH₂COO)₆(dea)₁₂(H₂O)₃₀]·(NO₃)₈·Cl₄·(CH₃CH₂OH)₆·(H₂O)₁₂ (Ln₁₈Co₇, Ln = Gd (1) and Dy (2)) have been obtained by reacting CoCl₂·6H₂O, Ln(NO₃)₃·6H₂O, and a mixture of ligands consisting of propionate and diethanolamine (H₂dea). Crystal structural analysis exhibits two three-blade propellers composed of the Co^III₃Ln₉ units connected by one Co^II ion and three CO₃^2- ions, which assemble into a double-propeller-like structure (Ln₁₈Co^IICo^III₆). Magnetocaloric effect (MCE) studies indicate that Gd₁₈Co₇ exhibits a large entropy change (-ΔS_m) of 36.9 J kg^-1 K^-1.

An Mn(II) cluster–based coordination framework derived from a C3 symmetric ligand: Synthesis, structure, and magnetic properties

A new coordination framework {[Mn7(L)4(OH)2(H2O)4(DMA)4]·8H2O·6DMA}n (H3 L = 3,3′,3″-[1,3,5-benzenetriyltris(carbonylimino)]tris(benzoate); DMA = N,N-dimethylacetamide) is synthesized under mixed solvothermal conditions. Structural analysis reveals that this complex possesses a three-dimensional framework with (3,10)- c topology based on different [Mn6] clusters. Moreover, magnetic investigations suggest that intra-cluster Mn(II) ions exhibit antiferromagnetic coupling.

Synthesis, crystal structures and magnetic properties of two heterometallic {Ln8Cr4} (Ln = Gd3+ and Tb3+) complexes with one-dimensional wave chain structure

Two isomorphic heterometallic 3d-4f cluster-based materials, formulated [Gd8Cr4(IN)18(μ3-O)2(μ3-OH)6(μ4-O)4(H2O)10]·13H2O (1) and [Tb8Cr4(IN)18(μ3-O)2(μ3-OH)6(μ4-O)4(H2O)10]·13H2O (2) (abbreviation: {Ln8Cr4}: Ln = Gd3+ (1); Tb3+ (2); HIN = isonicotinic acid), were achieved by hydro-/solvothermal method through using the ligand HIN. X-ray diffraction analysis illustrates eight lanthanide ions (Ln = Gd3+, Tb3+) and four transition-metal ions (Cr3+) of {Ln8Cr4} were constructed from two classical "drum-like" {Ln4Cr2} structures associated by organic ligands HIN, displaying a one-dimensional wave chain structure, which is rare. The magnetic properties of {Gd8Cr4} were inspected and showed the existence of antiferromagnetic coupling interactions between contiguous metal ions. On top of this, the magnetic entropy change of ΔS m can attain 23.40 J kg-1 K-1 (44.90 mJ cm-3 K-1) at about 3 K and ΔH = 7 T. Besides, fluorescence measurements of {Tb8Cr4} display typical characteristic Tb-based luminescence.

Zeolitic Metal Cluster Carboxylic Framework for Selective Carbon Dioxide Chemical Fixation through the Superlarge Cage

Metal-organic frameworks (MOFs) with zeolitic structure process fantastic structural metrics and display excellent applications in many aspects; however, they are difficult to assemble. Herein, on the basis of a tetrahedral Zn₄O cluster and a 3,5-bis(2,4-dicarboxylphenyl)nitrobenzene (H₄L) ligand, a novel sodalite (SOD) zeolitic cluster framework (ZCF), {[Zn₄(O)(L)₂]·4DMF·6H₂O}_n (ZCF-1; DMF = N,N-dimethylformamide), has been hydrothermally synthesized. Compared with the traditional SOD zeolitic framework of ZIF-8, the cage size of ZCF-1 is dramatically improved from 16.9 to 29.2 Å by the introduction of longer tetradentate carboxylic ligands. Moreover, because of the functional nitryl group in the ligand, ZCF-1 exhibits a high CO₂/CH₄ selectivity. Hence, further research on the chemical fixation of CO₂ is implemented, which reveals excellent heterogeneous catalytic activity and durability. Especially, a unique selective catalytic performance with a high yield of 88.3% on a larger molecular size reactant (glycidyl phenyl ether) is observed, which is attributed to the stereoselection effect of the superlarge cage and abundant Zn₄O catalytic clusters in ZCF-1.

Structures and magnetic properties of novel Ln(iii)-based pentanuclear clusters: magnetic refrigeration and single-molecule magnet behavior

The Gd5 cluster displays significant magnetic refrigeration properties, whereas the Dy5 cluster exhibits remarkable SMM behavior. Clusters 2, 4, and 5 display the characteristic lanthanum luminescence.

2D chain layer versus 1D chain: rigid aromatic benzoate disassembling flexible alicyclic dicarboxylate-based lanthanide coordination polymers with enhanced photoluminescence and characteristic single-molecule magnet behavior

Used as photosensitizer and structural separator, aromatic benzoate activator was grafted on cyclopropane dicarboxylate-based lanthanide coordination polymers with efficient photoluminescence and characteristic behavior of single molecule magnet.

Rare-earth metal–organic frameworks: from structure to applications

In the past 30 years, rare-earth metal–organic frameworks (MOFs) have been gaining attention owing to their diverse chemical structures, and tunable properties.

A single-ligand-protected Eu60−nGd(Tb)n cluster: a reasonable new approach to expand lanthanide aggregations

Two fascinating configurations were obtained based on mixed-lanthanide conditions, abbreviated as mixed-Ln₆₀. The synthesis provides a way to obtain similar metal-core Ln high-nuclearity clusters, breaking the ionic radius limitation.

Structures, magnetic refrigeration and single molecule-magnet behavior of five rhombus-shaped tetranuclear Ln(iii)-based clusters

The rhombus-shaped Gd₄ cluster displays a magnetic refrigeration property, and the Dy₄ cluster shows remarkable SMM behavior.

Syntheses of three new isostructural lanthanide coordination polymers with tunable emission colours through bimetallic doping, and their luminescence sensing properties

Tuning the emissive color changes of lanthanide (Ln) complexes is an important and appealing project for promoting the applications of Ln-complexes. A solvothermal reaction of 4-cyano-3-methylbenzoic acid (HL) and Ln(NO3)3·6H2O affords three isostructural Ln-complexes [Eu(L)3(H2O)2]n (1-Ln) (Ln = Eu, Gd and Tb) with one-dimensional chain structures. 1-Eu and 1-Tb show bright red and green emissions with absolute quantum yields of 3.06% and 11.96%, respectively, and the energy transfer was analyzed in detail through combined calculations. Interestingly, a series of heterometallic doped 1-TbxEu1-x coordination polymers were also obtained by mixing different ratios of Eu3+ and Tb3+ ions, which possess continuous luminescent color changes from green to yellow, orange and red. In addition, 1-Eu exhibits high quenching efficiency and low detection limit (∼10-4 M) for the simultaneous sensing of MnO4-, CrO42- and Cr2O72- ions in water.