Stereospecific Synthesis of Tris-heteroleptic Tris-cyclometalated Iridium(III) Complexes via Different Heteroleptic Halogen-Bridged Iridium(III) Dimers and Their Photophysical Properties

C-H, N-H, and O-H Bond Activations to Prepare Phosphorescent Hydride-Iridium(III)-Phosphine Emitters with Photocatalytic Achievement in C-C Coupling Reactions

Complex IrH5(PiPr3)2 (1) activates two different σ-bonds of 3-phenoxy-1-phenylisoquinoline, 2-(1H-benzimidazol-2-yl)-6-phenylpyridine, 2-(1H-indol-2-yl)-6-phenylpyridine, 2-(2-hydroxyphenyl)-6-phenylpyridine, N-(2-hydroxyphenyl)-N'-phenylimidazolylidene, and 1,3-di(2-pyridyl)-4,6-dimethylbenzene to give IrH{κ3-C,N,C-[C6H4-isoqui-O-C6H4]}(PiPr3)2 (2), IrH{κ3-N,N,C-[NBzim-py-C6H4]}(PiPr3)2 (3), IrH{κ3-N,N,C-[Ind-py-C6H4]}(PiPr3)2 (4), IrH{κ3-C,N,O-[C6H4-py-C6H4O]}(PiPr3)2 (5), IrH{κ3-C,C,O-[C6H4-Im-C6H4O]}(PiPr3)2 (6), and IrH{κ3-N,C,C-[py-C6HMe2-C5H3N]}(PiPr3)2 (7), respectively. The activations are sequential, with the second generally being the slowest. Accordingly, dihydride intermediates IrH2{κ2-C,N-[C6H4-isoqui-O-C6H5]}(PiPr3)2 (2d), IrH2{κ2-N,N-[NBzim-py-C6H5]}(PiPr3)2 (3d), IrH2{κ2-N,N-[Ind-py-C6H5]}(PiPr3)2 (4d), and IrH2{κ2-N,C-[py-C6HMe2-py]}(PiPr3)2 (7d) were characterized spectroscopically. Complexes 3 and 5 are green phosphorescent emitters upon photoexcitation, exhibiting good absorption over a wide range of wavelengths, emission quantum yields about 0.70 in solution, long enough lifetimes (10-17 μs), and reversible electrochemical behavior. In agreement with these features, complex 3 promotes the photocatalytic α-amino C(sp3)-H arylation of N,N-dimethylaniline and N-phenylpiperidine with 1,4-dicyanobenzene and 4-cyanopyridine under blue LED light irradiation. The C-C coupling products are isolated in high yields with only 2 mol % of photocatalyst after 24 h.

Two Synthetic Tools to Deepen the Understanding of the Influence of Stereochemistry on the Properties of Iridium(III) Heteroleptic Emitters

Two complementary procedures are presented to prepare cis-pyridyl-iridium(III) emitters of the class [3b+3b+3b'] with two orthometalated ligands of the 2-phenylpyridine type (3b) and a third ligand (3b'). They allowed to obtain four emitters of this class and to compare their properties with those of the trans-pyridyl isomers. The finding starts from IrH5(PiPr3)2, which reacts with 2-(p-tolyl)pyridine to give fac-[Ir{κ2-C,N-[C6MeH3-py]}3] with an almost quantitative yield. Stirring the latter in the appropriate amount of a saturated solution of HCl in toluene results in the cis-pyridyl adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} stabilized with p-tolylpyridinium chloride, which can also be transformed into dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2. Adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} directly generates cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-Isoqui]}] and cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-py]}] by transmetalation from Li[2-(isoquinolin-1-yl)-C6H4] and Li[py-2-C6H4]. Dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2 is also a useful starting complex when the precursor molecule of 3b' has a fairly acidic hydrogen atom, suitable for removal by hydroxide groups. Thus, its reactions with 2-picolinic acid and acetylacetone (Hacac) lead to cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,N-[OC(O)-py]} and cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,O-[acac]}. The stereochemistry of the emitter does not significantly influence the emission wavelengths. On the contrary, its efficiency is highly dependent on and associated with the stability of the isomer. The more stable isomer shows a higher quantum yield and color purity.

Optical Resolution of Carboxylic Acid Derivatives of Homoleptic Cyclometalated Iridium(III) Complexes via Diastereomers Formed with Chiral Auxiliaries

We report on a facile method for the optical resolution of cyclometalated iridium(III) (Ir(III)) complexes via diastereomers formed with chiral auxiliaries. The racemic carboxylic acids of Ir(III) complexes (fac-4 (fac-Ir(ppyCO2H)3 (ppy: 2-phenylpyridine)), fac-6 (fac-Ir(tpyCO2H)3 (tpy: 2-(4'-tolyl)pyridine)), and fac-13 (fac-Ir(mpiqCO2H)3 (mpiq: 1-(4'-methylphenyl)isoquinoline))) were converted into the diastereomers, Δ- and Λ-forms of fac-9 (from fac-6), fac-10 (from fac-4), fac-11 (from fac-6), and fac-14 (from fac-13), respectively, by the condensation with (1R,2R)-1,2-diaminocyclohexane or (1R,2R)-2-aminocyclohexanol. The resulting diastereomers were separated by HPLC (with a nonchiral column) or silica gel column chromatography, and their absolute stereochemistry was determined by X-ray single-crystal structure analysis and CD (circular dichroism) spectra. Spectra of all diastereomers of the Ir(III) complexes are reported. Hydrolysis of the ester moieties of Δ- and Λ-forms of fac-10, fac-11, and fac-14 gave both enantiomers of the corresponding carboxylic acid derivatives in the optically pure forms, Δ-fac and Λ-fac-4, -6, and -13, respectively.

Ligand Design and Preparation, Photophysical Properties, and Device Performance of an Encapsulated-Type Pseudo-Tris(heteroleptic) Iridium(III) Emitter

The organic molecule 2-(1-phenyl-1-(pyridin-2-yl)ethyl)-6-(3-(1-phenyl-1-(pyridin-2-yl)ethyl)phenyl)pyridine (H3L) has been designed, prepared, and employed to synthesize the encapsulated-type pseudo-tris(heteroleptic) iridium(III) derivative Ir(κ6-fac-C,C',C″-fac-N,N',N″-L). Its formation takes place as a result of the coordination of the heterocycles to the iridium center and the ortho-CH bond activation of the phenyl groups. Dimer [Ir(μ-Cl)(η4-COD)]2 is suitable for the preparation of this compound of class [Ir(9h)] (9h = 9-electron donor hexadentate ligand), but Ir(acac)3 is a more appropriate starting material. Reactions were carried out in 1-phenylethanol. In contrast to the latter, 2-ethoxyethanol promotes the metal carbonylation, inhibiting the full coordination of H3L. Complex Ir(κ6-fac-C,C',C″-fac-N,N',N″-L) is a phosphorescent emitter upon photoexcitation, which has been employed to fabricate four yellow emitting devices with 1931 CIE (x:y) ∼ (0.52:0.48) and a maximum wavelength at 576 nm. These devices display luminous efficacies, external quantum efficiencies, and power efficacies at 600 cd m-2, which lie in the ranges 21.4-31.3 cd A-1, 7.8-11.3%, and 10.2-14.1 lm W1-, respectively, depending on the device configuration.

Acetylides for the Preparation of Phosphorescent Iridium(III) Complexes: Iridaoxazoles and Their Transformation into Hydroxycarbenes and N,C(sp3),C(sp2),O-Tetradentate Ligands

The preparation of three families of phosphorescent iridium(III) emitters, including iridaoxazole derivatives, hydroxycarbene compounds, and N,C(sp³),C(sp²),O-tetradentate containing complexes, has been performed starting from dimers cis-[Ir(μ²-η²-C≡CR){κ²-C,N-(MeC₆H₃-py)}₂]₂ (R = ^tBu (1a), Ph (1b)). Reactions of 1a with benzamide, acetamide, phenylacetamide, and trifluoroacetamide lead to the iridaoxazole derivatives Ir{κ²-C,O-[C(CH₂^tBu)NC(R)O]}{κ²-C,N-(MeC₆H₃-py)}₂ (R = Ph (2), Me (3), CH₂Ph (4), CF₃ (5)) with a fac disposition of carbons and heteroatoms around the metal center. In 2-methyltetrahydrofuran and dichloromethane, water promotes the C-N rupture of the IrC-N bond of the iridaoxazole ring of 3-5 to form amidate-iridium(III)-hydroxycarbene derivatives Ir{κ¹-N-[NHC(R)O]}{κ²-C,N-(MeC₆H₃-py)}₂{═C(CH₂^tBu)OH} (R = Me (6), CH₂Ph (7), CF₃ (8)). In contrast to 1a, dimer 1b reacts with benzamide and acetamide to give Ir{κ⁴-N,C,C',O-[py-MeC₆H₃-C(CH₂-C₆H₄)NHC(R)O]}{κ²-C,N-(MeC₆H₃-py)}(R = Ph (9), Me (10)), which bear a N,C(sp³),C(sp²),O-tetradentate ligand resulting from a triple coupling (an alkynyl ligand, an amide, and a coordinated aryl group) and a C-H bond activation at the metal coordination sphere. Complexes 2-4 and 6-10 are emissive upon photoexcitation, in orange (2-4), green (6-8), and yellow (9 and 10) regions, with quantum yields between low and moderate (0.01-0.50) and short lifetimes (0.2-9.0 μs).

Rational Design of Mono- and Bi-Nuclear Cyclometalated Ir(III) Complexes Containing Di-Pyridylamine Motifs: Synthesis, Structure, and Luminescent Properties

Heteroleptic cyclometalated iridium (III) complexes (1–3) containing di-pyridylamine motifs were prepared in a stepwise fashion. The presence of the di-pyridylamine ligands tunes their electronic and optical properties, generating blue phosphorescent emitters at room temperature. Herein we describe the synthesis of the mononuclear iridium complexes [Ir(ppy)₂(DPA)][OTf] (1), (ppy = phenylpyridine; DPA = Dipyridylamine) and [Ir(ppy)₂(DPA-PhI)][OTf] (2), (DPA-PhI = Dipyridylamino-phenyliodide). Moreover, the dinuclear iridium complex [Ir(ppy)₂(L)Ir(ppy)₂][OTf]₂ (3) containing a rigid angular ligand “L = 3,5-bis[4-(2,2′-dipyridylamino)phenylacetylenyl]toluene” and displaying two di-pyridylamino groups was also prepared. For comparison purposes, the related dinuclear rhodium complex [Rh (ppy)₂(L)Rh(ppy)₂][OTf]₂ (4) was also synthesized. The x-ray molecular structure of complex 2 was reported and confirmed the formation of the target molecule. The rhodium complex 4 was found to be emissive only at low temperature; in contrast, all iridium complexes 1–3 were found to be phosphorescent in solution at 77 K and room temperature, displaying blue emissions in the range of 478–481 nm.

Divergent Approach for Tris-Heteroleptic Cyclometalated Iridium Complexes Using Triisopropylsilylethynyl-Substituted Synthons

Bis-heteroleptic cyclometalated iridium complexes of the form Ir(L^a)₂(acac), where L^a is a substituted 2-phenylpyridine derivative and acac is an acetylacetonato ligand, are a useful class of luminescent organometallic complexes for a range of applications. Related tris-heteroleptic complexes of the form Ir(L^a)(L^b)(acac) offer the potential advantage of greater functionality through the use of two different cyclometalated ligands but are, in general, more difficult to obtain. We report the synthesis of divergent bis- and tris-heteroleptic triisopropylsilylethynyl-substituted intermediate complexes that can be diversified using a “chemistry-on-the-complex” approach. We demonstrate the methodology through one-pot deprotection and Sonogashira cross-coupling of the intermediate complexes with para-R-aryliodides (R = H, SMe, and CN). The photophysical and electrochemical behaviors of the resultant bis- and tris-heteroleptic complexes are compared, and it is shown that the tris-heteroleptic complexes exhibit subtly different emission and redox properties to the bis-heteroleptic complexes, such as further red-shifted emission maxima and lower extinction coefficients, which can be attributed to the reduced symmetry. It is demonstrated, supported by DFT and time-dependent DFT calculations, that the charge-transfer character of the emission can be altered via variation of the terminal substituent; the introduction of an electron-withdrawing cyano group in the terminal position leads to a significant red shift, while the introduction of an SMe group can substantially increase the emission quantum yield. Most notably, this convenient synthetic approach reduces the need to perform the often challenging isolation of tris-heteroleptic complexes to a single divergent intermediate, which will simplify access to families of complexes of the form Ir(L^a)(L^b)(acac).

Post-complexation Functionalization of Cyclometalated Iridium(III) Complexes and Applications to Biomedical and Material Sciences

Cyclometalated iridium(III) (Ir(III)) complexes exhibit excellent photophysical properties that include large Stokes shift, high emission quantum yields, and microsecond-order emission lifetimes, due to low-lying metal-to-ligand charge transfer (spin-forbidden singlet-triplet (³MLCT) transition). As a result, analogs have been applied for research not only in the material sciences, such as the development of organic light-emitting diodes (OLEDs), but also for photocatalysts, bioimaging probes, and anticancer reagents. Although a variety of methods for the synthesis and the applications of functionalized cyclometalated iridium complexes have been reported, functional groups are generally introduced to the ligands prior to the complexation with Ir salts. Therefore, it is difficult to introduce thermally unstable functional groups such as peptides and sugars due to the harsh reaction conditions such as the high temperatures used in the complexation with Ir salts. In this review, the functionalization of Ir complexes after the formation of cyclometalated Ir complexes and their biological and material applications are described. These methods are referred to as "post-complexation functionalization (PCF)." In this review, applications of PCF to the design and synthesis of Ir(III) complexes that exhibit blue -red and white color emissions, luminescence pH probes, luminescent probes of cancer cells, compounds that induce cell death in cancer cells, and luminescent complexes that have long emission lifetimes are summarized.

Alkynyl Ligands as Building Blocks for the Preparation of Phosphorescent Iridium(III) Emitters: Alternative Synthetic Precursors and Procedures

Alkynyl ligands stabilize dimers [Ir(μ-X)(3b)₂]₂ with a cis disposition of the heterocycles of the 3b ligands, in contrast to chloride. Thus, the complexes of this class—cis-[Ir(μ₂-η²-C≡CPh){κ²-C,N-(C₆H₄-Isoqui)}₂]₂ (Isoqui = isoquinoline) and cis-[Ir(μ₂-η²-C≡CR){κ²-C,N-(MeC₆H₃-py)}₂]₂ (R = Ph, ^tBu)—have been prepared in high yields, starting from the dihydroxo-bridged dimers trans-[Ir(μ-OH){κ²-C,N-(C₆H₄-Isoqui)}₂]₂ and trans-[Ir(μ-OH){κ²-C,N-(MeC₆H₃-py)}₂]₂ and terminal alkynes. Subsequently, the acetylide ligands have been employed as building blocks to prepare the orange and green iridium(III) phosphorescent emitters, Ir{κ²-C,N-[C(CH₂Ph)Npy]}{κ²-C,N-(C₆H₄-Isoqui)}₂ and Ir{κ²-C,N-[C(CH₂R)Npy]}{κ²-C,N-(MeC₆H₃-py)}₂ (R = Ph, ^tBu), respectively, with an octahedral structure of fac carbon and nitrogen atoms. The green emitter Ir{κ²-C,N-[C(CH₂^tBu)Npy]}{κ²-C,N-(MeC₆H₃-py)}₂ reaches 100% of quantum yield in both the poly(methyl methacrylate) (PMMA) film and 2-MeTHF at room temperature. In organic light-emitting diode (OLED) devices, it demonstrates very saturated green emission at a peak wavelength of 500 nm, with an external quantum efficiency (EQE) of over 12% or luminous efficacy of 30.7 cd/A.

Acetylide ligands have been employed as building blocks to prepare orange and green iridium(III) phosphorescent emitters, with an octahedral structure of fac carbon and nitrogen atoms. In OLED devices, the emitter Ir{κ²-C,N-[C(CH₂^tBu)Npy]}{κ²-C,N-(MeC₆H₃-py)}₂ demonstrates very saturated green emission at a peak wavelength of 500 nm, with a luminous efficacy of 30.7 cd/A.

A simple approach to C3-ethoxycarbonylmethylation of thiophenes/furans with diethyl bromomalonate

A mild and efficient method to produce C3-malonated products was developed via a visible-light-induced radical reaction of 2-substituted thiophenes/furans with diethyl bromomalonate. The C3-ethoxycarbonylmethylation of 2-substituted thiophenes/furans exhibited broad substrate...

Pseudo-Tris(heteroleptic) Red Phosphorescent Iridium(III) Complexes Bearing a Dianionic C,N,C',N'-Tetradentate Ligand

1-Phenyl-3-(1-phenyl-1-(pyridin-2-yl)ethyl)isoquinoline (H₂MeL) has been prepared by Pd(N-XantPhos)-catalyzed “deprotonative cross-coupling processes” to synthesize new phosphorescent red iridium(III) emitters (601–732 nm), including the carbonyl derivative Ir(κ⁴-cis-C,C′-cis-N,N′-MeL)Cl(CO) and the acetylacetonate compound Ir(κ⁴-cis-C,C′-cis-N,N′-MeL)(acac). The tetradentate 6e-donor ligand (6tt′) of these complexes is formed by two different bidentate units, namely, an orthometalated 2-phenylisoquinoline and an orthometalated 2-benzylpyridine. The link between the bidentate units reduces the number of possible stereoisomers of the structures [6tt′ + 3b] (3b = bidentate 3e-donor ligand), with respect to a [3b + 3b′ + 3b″] emitter containing three free bidentate units, and it permits a noticeable stereocontrol. Thus, the isomers fac-Ir(κ⁴-cis-C,C′-cis-N,N′-MeL){κ²-C,N-(C₆H₄-py)}, mer-Ir(κ⁴-cis-C,C′-cis-N,N′-MeL){κ²-C,N-(C₆H₃R-py)}, and mer-Ir(κ⁴-trans-C,C′-cis-N,N′-MeL){κ²-C,N-(C₆HR-py)} (R = H, Me) have also been selectively obtained. The new emitters display short lifetimes (0.7–4.6 μs) and quantum yields in a doped poly(methyl methacrylate) film at 5 wt % and 2-methyltetrahydrofuran at room temperature between 0.08 and 0.58. The acetylacetonate complex Ir(κ⁴-cis-C,C′-cis-N,N′-MeL)(acac) has been used as a dopant for a red PhOLED device with an electroluminescence λ_max of 672 nm and an external quantum efficiency of 3.4% at 10 mA/cm².

The proligand 1-phenyl-3-(1-phenyl-1-(pyridine-2-yl)ethyl)isoquinoline is used to generate a new family of neutral phosphorescent red iridium(III) emitters containing a tetradentate ligand, formed by two different bidentate units, and a third bidentate ligand with a good stereocontrol of the resulting [6tt′ + 3b] products. One of the new emitters has been used in the fabrication of an OLED device.

Effects of geometrical isomerism on emissive behaviour of heteroleptic cyclometalated Ir(III) complexes

In this study, we report the emissive properties of a heteroleptic cyclometalated Ir(iii) complex, [Ir(bzq)2(PBO)] (bzqH = benzo[h]quinoline; PBOH = 2-(2-hydroxyphenyl)benzoxazole). The complex, [Ir(C^N)2(N^O)], was synthesised and optically resolved using a chiral column. Two geometrical isomers, trans-(N,N) and cis-(N,N) isomers, were obtained as the major and minor products in an enantiopure form, respectively. Their molecular structures were determined using single crystal X-ray analysis. In the crystalline states, the intermolecular C-Hπ interaction between PBO- and an H atom in bzq- was the main factor influencing molecular packing. When the complexes were dissolved in CH2Cl2 and excited at 430 nm under N2 atmosphere, yellow (λmax = 550 nm) and orange emissions (λmax = 570 nm) were observed for the trans-(N,N) and cis-(N,N) isomers, respectively, with the quantum yield higher for the former than the latter.

Stereoselective Formation of Facial Tris-Cyclometalated PtIV Complexes: Dual Phosphorescence from Heteroleptic Derivatives

A stereoselective synthetic route to homo- and heteroleptic facial tris-cyclometalated Pt^IV complexes is reported, involving the oxidative addition of 2-(2-pyridyl)- or 2-(1-isoquinolinyl)benzenediazonium salts to cis-[Pt(C^N)₂ ] precursors, with C^N=cyclometalated 2-(p-tolyl)pyridine (tpy), 2-phenylquinoline (pq), 2-(2-thienyl)pyridine or 1-phenylisoquinoline (piq), to produce labile diazenide intermediates that undergo photochemical or thermal elimination of N₂ . The method allows the preparation of derivatives bearing cyclometalated ligands of low π-π* transition energies. The new complexes exhibit phosphorescence in fluid solution at room temperature arising from triplet ligand-centered (³ LC) excited states, which, in the cases of the heteroleptic derivatives, involve the ligand with the lowest π-π* gap. The heteroleptic piq derivatives exhibit fluorescence and dual phosphorescence from different ligand-centered excited states in rigid media, demonstrating the potential of cyclometalated Pt^IV complexes as multi-emissive materials.

Design and Synthesis of Cyclometalated Iridium(III) Complexes-Chromophore Hybrids that Exhibit Long-Emission Lifetimes Based on a Reversible Electronic Energy Transfer Mechanism

We report on the design and synthesis of triscyclometalated iridium (Ir) complexes that contain aryloxy groups at the end of diamino linkers, which exhibit an extraordinarily long-emission lifetime, and were prepared by regioselective substitution reactions of fac-tris-homoleptic cyclometalated Ir complexes, fac-Ir(tpy)₃ (tpy = 2-(4'-tolyl)pyridine). It was found that the Ir(tpy)₃ complex, equipped with approximately one to six 6-N,N-dimethylamino-2-naphthoic acid (DMANA) groups through the appropriate alkyl linkers, exhibited remarkably long-emission lifetimes of up to 216 μs in DMSO/H₂O at room temperature through a reversible electronic energy transfer effect between the Ir complex core and the organic chromophore moieties; however, under the same conditions, the lifetime of fac-Ir(tpy)₃ was 1.4 μs. Regarding the mechanistic aspects, the relationship between the emission lifetimes of the Ir complexes and the structures and numbers of the conjugated chromophores, linker lengths, solvents, positions of the chromophores on the Ir(tpy)₃ core, and related items are discussed.

Exploration of the Structural and Photophysical Characteristics of Mono- and Binuclear Ir(III) Cyclometalated Complexes for Optoelectronic Applications

Intrinsic characteristics possessed and exhibited by Ir(III) cyclometalated complexes need to be further examined, understood, and explored for greater value enhancement and potentiation. This work focuses primarily on the comparative studies of the ligand structures, types, and their substituent influence on the photophysical and optoelectronic properties of typical cyclometalated mono- and binuclear iridium(III) complexes in solution or solid states.

Asymmetric Heteroleptic Ir(III) Phosphorescent Complexes with Aromatic Selenide and Selenophene Groups: Synthesis and Photophysical, Electrochemical, and Electrophosphorescent Behaviors

With the aim of evaluating the potential of selenium-containing groups in developing electroluminescent (EL) materials, a series of asymmetric heteroleptic Ir(III) phosphorescent complexes (Ir-Se0F, Ir-Se1F, Ir-Se2F, and Ir-Se3F) have been synthesized by using 2-selenophenylpyridine and one ppy-type (ppy = 2-phenylpyridine) ligand with a fluorinated selenide group. To the best of our knowledge, these complexes represent unprecedented examples of asymmetric heteroleptic Ir(III) phosphorescent emitters bearing selenium-containing groups. Natural transition orbital (NTO) analysis based on optimized geometries of the first triplet state (T₁) have shown that the phosphorescent emissions of these Ir(III) complexes dominantly show ³π-π* features of the 2-selenophenylpyridine ligand with slight metal to ligand charge transfer (MLCT) contribution. In comparison with their symmetric parent complex Ir-Se with two 2-selenophenylpyridine ligands, these asymmetric heteroleptic Ir(III) phosphorescent complexes can show much higher phosphorescent quantum yields (Φ_P) of ca. 0.90. Both the hole- and electron-trapping ability of these Ir(III) phosphorescent complexes can be enhanced by selenophene and fluorinated selenide groups to improve their EL efficiencies. The EL abilities of these asymmetric heteroleptic Ir(III) phosphorescent emitters fall in the order Ir-Se3F > Ir-Se2F > Ir-Se1F > Ir-Se0F. The highest EL efficiencies have been achieved by Ir-Se3F in the solution-processed OLEDs with external quantum efficiency (η_ext), current efficiency (η_L), and power efficiency (η_P) of 19.9%, 65.6 cd A^-1, and 57.3 lm W^-1, respectively. These encouraging EL results clearly indicate the great potential of selenium-containing groups in developing high-performance Ir(III) phosphorescent emitters.