PbCdF(SeO3)(NO3): A Nonlinear Optical Material Produced by Synergistic Effect of Four Functional Units

(C5H12N2S)Hg(NO3)2: A Mercury Nitrate Nonlinear Optical Crystal Motivated by Heteroatom Coordination Strategy

Effective design and synthesis of second-order nonlinear optical (NLO) materials hold immense significance in driving modern science and technology advancements. In this study, we synthesized a new acentric mercury nitrate, (C5H12N2S)Hg(NO3)2, by regulating the coordination of the Hg atom through the introduction of a heteroatom. It exhibits an unprecedented [(C5H12N2S)2Hg2(NO3)4]∞ chain composed of Hg2+, NO3-, and organic molecule C5H12N2S. Notably, (C5H12N2S)Hg(NO3)2 demonstrates an unprecedented HgO3S unit and a second harmonic generation (SHG) intensity of 1.3 × KDP at 1064 nm, presenting the second-order nonlinear mercury nitrate constructed by organic molecule. Theoretical calculations suggest that the HgO3S unit and organic molecule C5H12N2S significantly contribute to the SHG effect. This study demonstrates that the incorporation of heteroatoms is an effective strategy for the development of new NLO materials.

Hg16O12(NO3)6F2(H2O): A Mercury-Rich Nitrate Oxyfluoride with Diverse Triple-Coordinated Mercury-Based Units That Exhibits an Unparalleled [(Hg16O12F2(H2O))6+]∞ Cationic Framework and a Large Birefringence

Designing new compounds based on anion regulation has been widely favored due to the production of diverse crystal structures and excellent optical properties. Here, a new nitrate oxyfluoride, Hg16O12(NO3)6F2(H2O), has been obtained through a hydrothermal reaction. It crystallizes in the centric Ibca space group and shows a novel three-dimensional [(Hg16O12F2(H2O))6+]∞ cationic framework composed of interconnected HgO2F, HgO3, and HgO2(H2O) units, with isolated NO3- groups as balanced anions to build the whole structure. Notably, the HgO2F and HgO2(H2O) units are first presented here among mercury (Hg)-based compounds. Additionally, Hg16O12(NO3)6F2(H2O) exhibits a large birefringence of 0.17 at 546 nm. This work enriches the multiformity of Hg-based compounds and provides a route for developing promising birefringent materials.

Cadmium Hydroxyl Chloride with Balanced Band Gap and Second-Harmonic-Generation Response

Ultraviolet (UV) nonlinear-optical (NLO) materials are crucial in laser technology due to their ability to modulate light frequency. In this work, when d10 cations, hydroxyl groups, and Cl atoms were combined, a cadmium double salt, Cd(OH)Cl, was synthesized by a simple hydrothermal method. It has a large phase-matched second-harmonic-generation (SHG) response at 1064 nm (2.5 × KDP) with a short UV-cutoff edge (260 nm), which can be applied in a solar-blind UV band. Theoretical calculations suggest that [Cd(OH)3Cl3] groups lead to a large SHG response. Our work may shed light on the exploration of new NLO materials in metal hydroxyl chlorides.

Hg3Se(SeO3)(SO4): A Mixed-Valent Selenium Compound with Mid-Infrared Transmittance Obtained by In Situ Reaction

Exploring new material systems is a highly significant task in the field of inorganic chemistry. A new mixed-valent selenium compound, Hg3Se(SeO3)(SO4), was successfully synthesized through in situ reactions. This compound exhibits a novel three-dimensional structure composed of Hg3Se(SO4) layers bridged by SeO3 trigonal pyramids. It is the first structure containing (SeO3)2-, (SO4)2-, and Se2- simultaneously. In addition, Hg3Se(SeO3)(SO4) possesses a wide bandgap (3.5 eV), moderate birefringence (Cal:0.064@546 nm, Exp:0.069@546 nm), a high laser-induced damage threshold (23.35 MW cm-2), and a wide transmittance window (0.28-6.6 μm). Our work demonstrates that mixed-valent (+4, -2) selenite selenide can be potential optical materials for the mid-infrared region.

Designing Optical Anisotropy: Silver-Aminoalkylpyridine Nitrate Complexes with Tunable Structures

To introduce a design strategy for improving optical properties, two silver-amino alkylpyridine nitrate complexes, AgC6H8N3O3 and Ag2C14H20N6O6, were successfully synthesized using a recrystallization method. By employing polarizable π-conjugated [NO3-] ions, two types of pyridine ligands, and silver cations with a high affinity for pyridine, we obtained a one-dimensional chain structure with 4-aminomethylpyridine (AgC6H8N3O3) and a zero-dimensional molecular compound by introducing a relatively flexible aliphatic chain with 4-(2-aminoethyl)pyridine (Ag2C14H20N6O6). The compounds crystallize in the triclinic crystal system with the centrosymmetric P-1 space group, exhibiting a change in orientation between the π-conjugated system and the silver ion. Despite similar optical band gaps (3.69 eV for AgC6H8N3O3 and 3.73 eV for Ag2C14H20N6O6), AgC6H8N3O3 shows higher absorption in the 350-600 nm range. Electronic structure calculations support the ultraviolet absorption findings, suggesting that charge transfer with π-conjugated systems influences birefringence. Ag2C14H20N6O6 exhibits experimental birefringence (0.261@546.1 nm) surpassing that of AgC6H8N3O3 (0.212@546.1 nm), placing it among the highest recorded values within metal-pyridine incorporating nitrate complexes. The nonconventional orientation of π-conjugated [NO3-] ions contributes to this phenomenon, enhancing the action of free π-conjugated orbitals. This design strategy for micromodulating the alignment of the π-conjugated system promises to be an effective approach for enhancing optical properties, such as birefringence.

Synthesis, structures and properties of two new selenite optical materials: K2Zn3Se4O12 and K4Zn3V4Se2O19

Two new selenites, K2Zn3Se4O12 (compound 1) and K4Zn3V4Se2O19 (compound 2), have been successfully synthesized by solid-state reactions in vacuum tubes. Compound 1 consists of a three-dimensional (3D) framework with [SeO3] triangular pyramids and [ZnO4] tetrahedra in the monoclinic space group P21/c (No. 14). Compound 1's cut-off edge is below 344 nm, based on its UV-Vis-NIR diffuse reflectance studies, and theoretical calculations indicate a birefringence of around 0.043 at 1064 nm. The two-dimensional layer of compound 2, in contrast, is made up of [SeO3] triangular pyramids, [ZnO4] tetrahedra, and [V4O13] tetrahedra. It crystallizes in the monoclinic space group C2/c (No. 15). Its UV-Vis-NIR diffuse reflectance studies demonstrate that the compound's cut-off edge is lower than 330 nm.

Centrosymmetric Rb2Sb(C2O4)2.5(H2O)3 and Noncentrosymmetric RbSb2(C2O4)F5: Two Antimony (III) Oxalates as UV Optical Materials

Herein, we have successfully synthesized two rubidium antimony (III) oxalates, namely, Rb2Sb(C2O4)2.5(H2O)3 and RbSb2(C2O4)F5, utilizing a low-temperature hydrothermal method. These two compounds share a similar chemical composition, consisting of Sb3+ cations with active lone pair electrons, alkali metal Rb+ ions, and planar π-conjugated C2O42- anions. However, they exhibit different symmetries, Rb2Sb(C2O4)2.5(H2O)3 is centrosymmetric (CS), while RbSb2(C2O4)F5 is noncentrosymmetric (NCS), which should be caused by the presence of F- ions. Notably, the NCS compound, RbSb2(C2O4)F5, demonstrates a moderate second-harmonic generation (SHG) response, approximately 1.3 times that of KH2PO4 (KDP), and exhibits a large birefringence of 0.09 at 546 nm. These characteristics indicate that RbSb2(C2O4)F5 holds promising potential as a nonlinear optical material for ultraviolet (UV) applications. Detailed structural analysis and theoretical calculations confirm that the excellent optical properties arise from the synergistic effects between Sb3+ cations with SCALP and planar π-conjugated [C2O4]2- groups.

Perfectly Encoding π-Conjugated Anions in the RE5 (C3 N3 O3 )(OH)12 (RE=Y, Yb, Lu) Family with Strong Second Harmonic Generation Response and Balanced Birefringence

Nonlinear optical (NLO) crystal, which simultaneously exhibits strong second-harmonic-generation (SHG) response and desired optical anisotropy, is a core optical material accessible to the modern optoelectronics. Accompanied by strong SHG effect in a NLO crystal, a contradictory problem of overlarge birefringence is ignored, leading to low frequency doubling efficiency and poor beam quality. Herein, a series of rare earth cyanurates RE₅ (C₃ N₃ O₃ )(OH)₁₂ (RE=Y, Yb, Lu) were successfully characterized by 3D electron diffraction technique. Based on a "three birds with one stone" strategy, they enable the simultaneous fulfillment of strong SHG responses (2.5-4.2× KH₂ PO₄ ), short UV cutoff (ca. 220 nm) and applicable birefringence (ca. 0.15 at 800 nm) by the introduction of rare earth coordination control of π-conjugated (C₃ N₃ O₃ )^3- anions. These findings provide high-performance short-wavelength NLO materials and highlight the exploration of cyanurates as a new research area.

Layered Perovskite-like Nitrate Cs2Pb(NO3)2Br2 as a Multifunctional Optical Material

A novel alkali metal lead halide nitrate, Cs₂Pb(NO₃)₂Br₂, has been successfully synthesized via a hydrothermal method. Interestingly, the title compound features a distinctive Ruddlesden-Popper perovskite-like layered structure, which induces the outstanding multifunctional optical properties, including a large birefringence (0.147@546 nm) and broad light-orange emission. Detailed structural analysis and theoretical calculations revealed that the large birefringence originates from the p-π interaction between the Pb²⁺ cations and NO₃ groups and that the excellent luminescence properties derive from the distortion of PbO₄Br₄ polyhedra. This work not only enriches the variant structure types of layered perovskites but also guides the further exploration of all-inorganic multifunctional optical materials.

Growth, Optical, and Spectroscopic Properties of Pure and Nd3+-Doped GdSr3(PO4)3 Crystals with Disordered Structure

Disordered crystals have attracted immense attention for the generation of ultrashort laser pulses due to their good thermomechanical characteristics and wide emission bandwidths. In this work, a Gd-based orthophosphate crystal, GdSr₃(PO₄)₃, (GSP), and a Nd³⁺-doped GdSr₃(PO₄)₃ crystal, (Nd:GSP), were obtained by the Czochralski method. The crystal structure, optical properties, electronic band structure, laser damage threshold, and hardness of the GSP crystal were comprehensively investigated. It exhibited a disordered structure due to the random distribution of Sr and Gd atoms in the same Wyckoff site, which caused inhomogeneous spectral broadening. Additionally, it exhibited a short UV absorption cutoff edge (<200 nm), a large band gap (5.81 eV), and a high laser damage threshold (∼1850 MW/cm²). The spectral properties and Judd-Ofelt calculations of the Nd:GSP crystals were analyzed. A wide absorption band at 803 nm, with a full width at half-maximum value of 20 nm, makes the Nd:GSP crystal suitable for the efficient pumping of AlGaAs laser diodes. Sub-100-fs pulses could be supported by its 25 nm emission bandwidth. Hence, the GSP crystal could be a promising disordered crystal laser matrix.

Role of fluorine on the structure and second-harmonic-generation property of inorganic selenites and tellurites

Fluorine, as the most electronegative element, can replace the oxygen ligands of functional groups under given conditions. These fluoride groups are more or less different from the pure oxide groups in composition, symmetry, polarizability, transmittancy, etc. The rational use of these differences is expected to improve the probability of noncentrosymmetric structures and the comprehensive performance of second-harmonic-generation (SHG) materials. In this feature article, we introduce the recent developments in fluoride selenite and tellurite SHG materials together with highlighting our contributions, including Se(IV) and Te(IV) compounds with (i) d⁰ transition metal oxyfluoride octahedron, (ii) IIIA metal oxyfluoride octahedron, (iii) fluoride lone pair cation polyhedron, and (iv) other fluoride polyhedron. The future perspectives of fluoride selenite and tellurite SHG materials are also discussed.

Molecular Engineering toward an Enlarged Optical Band Gap in a Bismuth Sulfate via Homovalent Cation Substitution

Materials capable of generating coherent short-wave (<300 nm) light have attracted extensive scientific and technical interest due to their wide utilization in laser research. In this study, a the rare-earth-metal sulfate NaCe(SO₄)₂(H₂O) (NCSO) was synthesized through a hydrothermal method, while NaBi(SO₄)₂(H₂O) (NBSO) was successfully obtained via a homovalent cation substitution of the parent compound NCSO under hydrothermal conditions. The space groups of crystalline NCSO and NBSO are P3₁2₁ and P3₂2₁, respectively. Both compounds have similar connectivities which feature a three-dimensional channel structure formed by asymmetric [CeO₉]^15-/[BiO₉]^15- tricapped trigonal prisms and distorted [SO₄]^2- tetrahedra. The introduction of Bi³⁺ with larger ionic radii and stereochemically active lone-pair electrons simultaneously enhanced the SHG effect and band gap of NBSO in comparison to its parent compound NCSO. In contrast to NCSO, which possesses a narrow energy band gap (2.46 eV), NBSO displays the largest energy band gap (4.54 eV) among the reported bismuth sulfate NLO materials. Powder frequency-doubling-effect measurements exhibit that NCSO and NBSO possess phase-matchable SHG responses of 0.2 × KDP and 0.38 × KDP at 1064 nm, respectively. Theoretical studies have been implemented to further elucidate the structure-performance relationships of the two compounds. Experimental and theoretical studies both demonstrate that NBSO may be a promising nonlinear material applied in the short-wavelength region.

Hydrogen-Bond-Assisted Alignment of [MCu(SeO3)4Cl(H2O)]4- (M = Fe, Ga) Anionic Layers to Form Two Polar Oxychlorides: Pb2MCu(SeO3)4Cl(H2O)

Two novel selenite oxychlorides Pb₂MCu(SeO₃)₄Cl(H₂O) (M = Fe, Ga) were hydrothermally synthesized and structurally characterized. They are isostructural and crystallize in the two-dimensional [MCu(SeO₃)₄Cl(H₂O)]^4- anionic layer structure mediated with hydrogen bonds and aligned between neighboring layers which assist in building the three-dimensional framework with a polar space group. Optical properties measurements revealed that the optical band gaps are 2.61 and 3.22 eV for Pb₂FeCu(SeO₃)₄Cl(H₂O) (1) and Pb₂GaCu(SeO₃)₄Cl(H₂O) (2) and the SHG responses are about 0.12 and 0.18 times that of KDP, respectively. Furthermore, 1 exhibits an interesting metamagnetic phenomenon under varied applied fields from around 1 to 4 T at 2 K, and 2 behaves with potential ferromagnetic ordering at low temperature.

Selenite bromide nonlinear optical materials Pb2GaF2(SeO3)2Br and Pb2NbO2(SeO3)2Br: synthesis and characterization

Two new isomorphic selenite bromides, namely Pb2GaF2(SeO3)2Br (1) and Pb2NbO2(SeO3)2Br (2), were synthesized by mild hydrothermal reactions. These two compounds crystallize in the noncentrosymmertric space group P21 and feature 3D structures consisting of 1D (Pb2Br)3+ cationic chains and 2D [Ga2F4(SeO3)4]6-/[Nb2O4(SeO3)4]6- anonic chains. As measured, 1 and 2 are phase-matchable and exhibit excellent second harmonic generation (SHG) responses of 4.5 and 1.4 times that of KDP, respectively. Moreover, these two compounds possess wide bandgaps (>3.17 eV) and high thermal stabilities (>425 °C), indicating their suitable performances as potential nonlinear optical materials. First-principle density functional theory (DFT) calculations were also performed to explicate the structure-property relationship.

Gd(NO3)(Se2O5)·3H2O: a nitrate-selenite nonlinear optical material with a short ultraviolet cutoff edge

The first example of a rare-earth metal nitrate-selenite nonlinear optical (NLO) crystal, Gd(NO₃)(Se₂O₅)·3H₂O (1), was synthesized by hydrothermal reaction. This compound crystallizes in the noncentrosymmetric space group P2₁2₁2₁, and its structure features two-dimensional (2D) [Gd(NO₃)(Se₂O₅)]_∞ layers, extending to a pseudo-3D framework linked by hydrogen bonds. 1 exhibits a phase-matchable SHG efficiency about 0.2 times that of KH₂PO₄ (KDP) and a large laser damage threshold of 236.26 MW cm^-2. The UV-Vis-NIR diffuse reflectance spectroscopy study shows that the UV cutoff edge of 1 is 224 nm, which is the shortest value observed among selenite-based NLO materials. The birefringence of 1 is 0.109@1064 nm based on density functional theory calculations. These optical properties make 1 a potential UV NLO material. Theoretical studies using density functional theory have been implemented to further understand the relationship between its optical properties and band structures.

Recent progress in selenite and tellurite based SHG materials

Fluorination and bandgaps have attracted more attention than d⁰ TM and SHG efficiency recently in metal selenites and tellurites.

Nontoxic KBBF Family Member Zn2BO3(OH): Balance between Beneficial Layered Structure and Layer Tendency

The conflict between beneficial layered structure for performances and layered growth habits in KBe2BO3F2 (KBBF) always restricts its practical applications. A beryllium-free KBBF family member, Zn2BO3(OH), is explored to feature the same topological layer with KBBF by replacing [BeO3F]5- with [ZnO3(OH)]5- and excellent UV performances. It exhibits a second harmonic generation response of about 1.5 × KH2PO4 with the UV cutoff edge of 204 nm. The birefringence of Zn2BO3(OH) in the visible region is about 0.067, which is larger than those of commercial UV crystals LiB3O5, CsB3O5, and CsLiB6O10. Additionally, it has excellent thermal and water-resistant stabilities. Owing to the removal of interlayer cations, Zn2BO3(OH) shows better growth habits than KBBF while achieving the balance between beneficial layered structure and layer tendency.

Exploration of New Birefringent Crystals in Bismuth d0 Transition Metal Selenites

The first examples of bismuth fluoride selenites with d⁰ -TM/Te^VI polyhedrons, namely, Bi₄ TiO₂ F₄ (SeO₃ )₄ (1), Bi₄ NbO₃ F₃ (SeO₃ )₄ (2), Bi₄ TeO₄ F₂ (TeO₃ )₂ (SeO₃ )₂ (3), Bi₂ F₂ (MoO₄ )(SeO₃ ) (4) and Bi₂ ZrO₂ F₂ (SeO₃ )₂ (5) have been successfully synthesized under hydrothermal reactions by aliovalent substitution. The five new compounds feature three different types of structures. Compounds 1-3, containing Ti^IV , Nb^V and Te^VI respectively, are isostructural, exhibiting a new 3D framework composed of a 3D bismuth oxyfluoride architecture, with intersecting tunnels occupied by d⁰ -TM/Te^VI octahedrons and selenite/tellurite groups. Interestingly, compound Bi₄ TeO₄ F₂ (TeO₃ )₂ (SeO₃ )₂ (3) is the first structure containing Se^IV and mixed-valent Te^IV /Te^VI cations simultaneously. Compound 4 features a new 3D structure formed by a 3D bismuth oxyfluoride network with MoO₄ tetrahedrons and selenites groups imbedded in the 1D tunnels. Compound 5 displays a novel pillar-layered 3D open framework, consisting of 2D bismuth oxide layers bridged by the [ZrO₂ F₂ (SeO₃ )₂ ]^6- polyanions. Theoretical calculations revealed that the five compounds displayed very strong birefringence. The birefringence values of compounds 1-3, especially, are above 0.19 at 1064 nm, which are larger than the mineral calcite. Based on the structure and property analysis, it was found that the asymmetric SeO₃ groups (and TeO₃ in compound 3) displayed the largest anisotropy, compared with the bismuth cations and the d⁰ -TM/Te polyhedra, which is beneficial to the birefringence.

Pb2Cd(SeO3)2X2 (X = Cl and Br): two halogenated selenites with phase matchable second harmonic generation

The second harmonic generation (SHG) efficiencies of Pb₂Cd(SeO₃)₂X₂ (X = Cl and Br) are higher than that of commercial KDP (KH₂PO₄) and their laser damage thresholds are 30 times more than that of AGS (AgGaS₂).

Cs2CdV2O6Cl2 and Cs3CdV4O12Br: two new non-centrosymmetric oxyhalides containing d0 and d10 cations and exhibiting second harmonic generation activity

Two new non-centrosymmetric oxyhalides containing d⁰ and d¹⁰ cations and exhibiting strong second harmonic generation activity.