Heterobimetallic Uranium–Nickel/Palladium/Platinum Complexes of Phosphinoaryl Oxide Ligands: A Theoretical Probe for Metal–Metal Bonding and Electronic Spectroscopy

Heterodinuclear AuNi(CO)n- (n = 2-3) Complexes Featuring an Anionic Au- as a Donor Ligand for Ni(CO)n

The gas-phase heterodinuclear gold-nickel carbonyl AuNi(CO)n- (n = 2-3) anion complexes were mass-selected and studied by using photoelectron velocity-map imaging spectroscopy in combination with quantum-chemical calculations, which can establish both the geometries and electronic structures of these anions. These complexes are all confirmed to be singlet ground states with one gold atom bonded at the central nickel atom of the Ni(CO)n moieties. Further bonding analyses indicate that unlike the alkali-metals as covalently bonded ligands to form the electron-sharing alkali-metal-nickel bonding in the alkali-metal-nickel carbonyl anionic complexes, the Au atom in the AuNi(CO)n- complexes serves as a datively bound ligand for Ni(CO)n to form gold-to-nickel dative bonding.

Deciphering the Role of Symmetry and Ligand Field in Designing Three-Coordinate Uranium and Plutonium Single-Molecule Magnets

Actinide single-molecule magnets (SMMs) have gained paramount interest in molecular magnetism as they offer a larger barrier height of magnetization (U_eff) reversal compared to the lanthanide analogue, thanks to their greater metal-ligand covalency. However, the reported actinide SMMs to date yield a relatively smaller U_eff as there is no established design principle to enhance U_eff values. To address this issue, we have employed ab initio CASSCF/CASPT2/NEVPT2 calculations to study a series of three-coordinate U³⁺ and Pu³⁺ SMMs. To begin with, we have studied two experimentally characterized U³⁺ ion-field-induced SMMs, namely, planar [U{N(SiMe₂^tBu)₂}₃] (1) and pyramidal [U{N(SiMe₃)₂}₃] (2) complexes reported earlier. Both the complexes were found to stabilize m_J = |±1/2⟩ as the ground state with a very strong quantum tunneling of magnetization (QTM), rendering them unsuitable for SMMs. Our calculations reveal that in the pyramidal geometry (such as in 2), the energy of the 5f²6d¹ state is lowered compared to the planar geometry (as in 1), resulting in a slightly better SMM characteristic in the former. To unravel the effect of symmetry in magnetic properties, ab initio calculations were performed on two reported T-shaped complexes [U(NSiⁱPr₂)₂(I)] (3) and [U(NHAr^iPr6)₂I] (4, Ar^iPr6 = 2,6-(2,4,6-iPr₃C₆H₂)₂C₆H₃). Quite interestingly, m_J = |±9/2⟩ is found to be the ground state for both the complexes with a blocking barrier exceeding 900 cm^-1. Furthermore, to decipher the effect of the transuranic element in magnetic anisotropy, ab initio calculations were extended to the Pu analogue of 2, [Pu{N(SiMe₃)₂}₃] (5), which yields a record-breaking blocking barrier of ∼1933 cm^-1. Among the three-coordinate geometries studied, the pyramidal geometry was found to offer substantial magnetic anisotropy for Pu³⁺ ions, while a T-shaped geometry is best suited for U³⁺ ions. While the chosen theoretical protocols' overestimation of barrier height cannot be avoided, these values are still several orders of magnitude larger than the U_eff values reported for any actinide SMMs and unveil a design principle for superior three-coordinate actinide-based SMMs.

H2 and carbon-heteroatom bond activation mediated by polarized heterobimetallic complexes

The field of heterobimetallic chemistry has rapidly expanded over the last decade. In addition to their interesting structural features, heterobimetallic structures have been found to facilitate a range of stoichiometric bond activations and catalytic processes. The accompanying review summarizes advances in this area since January of 2010. The review encompasses well-characterized heterobimetallic complexes, with a particular focus on mechanistic details surrounding their reactivity applications.

A relativistic DFT probe for small-molecule activation mediated by low-valent uranium metallocenes

DFT calculations rationalize the capability of uranium metallocenes in activating small molecules, and the experimentally inaccessible CO₂ adduct is addressed.

Theoretical insights into selective separation of trivalent actinide and lanthanide by ester and amide ligands based on phenanthroline skeleton

Phenanthroline based ligands have shown potential performance for partitioning trivalent actinides from lanthanides. In this work, we have explored four ester and amide ligands based on the phenanthroline skeleton and elucidated the separation mechanism between Am(iii) and Eu(iii) ions. The molecular geometries and extraction reactions of the metal-ligand complexes were modeled by using scalar-relativistic density functional theory. The results show that the amide based ligands have stronger coordination ability with the metal ions than the corresponding ester based ligands. According to the thermodynamic results, ligands N,N'-diethyl-N,N'-ditolyl-2,9-diamide-1,10-phenanthroline (L2) and N,N'-(1,10-phenanthroline-2,9-diyl)bis(N-ethyl-P-methyl-N-(p-tolyl)phosphinic amide) (L4) appear to have the strongest complexing ability, which is supported by the result of electrostatic potential (ESP) and the M-OL bond orders. Moreover, ligand L2 has excellent selectivity for Am(iii)/Eu(iii) among the four ligands. Additionally, the bonding properties between the metal ions and the ligands reveal that the Am(iii)/Eu(iii) selectivity stems from the Am-N bonds with more covalent character, which is supported by the analysis of the hardness of the ligands and the bond orders. This work provides useful information for understanding the Am(iii)/Eu(iii) selectivity of phenanthroline derived ligands bearing ester and amide groups.

How to understand very weak Cr-Cr double bonds and negative spin populations in trinuclear Cr complexes: theoretical insight

Trinuclear Cr(ii) complex [Cr3(dpa)4Cl2] 1 (Hdpa = dipyridylamine) has two Cr-Cr double bonds linked with each other. DMRG-CASPT2 calculations reproduced its symmetrical structure. The Cr-Cr effective bond order (EBO) was evaluated to be only 0.59 based on the density matrix based on localized orbitals from DMRG-CASSCF orbitals. The CASCI calculations showed a significantly large α-spin population on the terminal Cr atoms as expected but a significantly large β-spin population on the central Cr atom against expectations. The very small EBO and the presence of a large β-spin population are not consistent with the simple understanding that 1 has two Cr-Cr double bonds and a quintet ground state, which requests correct understanding of 1 from the viewpoint of chemical bond theory. Comparison of 1 with the allene molecule and allyl radical disclosed that the linked Cr-Cr bonds of 1 resembled the C-C bond of the allyl radical but completely differed from the linked C-C double bonds of allene despite the similar molecular structure. Its N3 analogue [Cr3(dpa)4(N3)2] 2 has non-symmetrical structure with shorter Cr1-Cr2 and longer Cr2-Cr3 bonds unlike 1, indicating that 2 is a valence tautomer of 1. DMRG-CASPT2 could reproduce its non-symmetrical structure but DFT/B3PW91 could not. In 2, the EBO is 0.95 for the shorter Cr1-Cr2 bond and 0.47 for the longer Cr2-Cr3 one. The terminal Cr3 has a very large α spin population, and the other terminal Cr1 has a somewhat large α spin population, but the central Cr2 has a considerably large β spin population. These results indicate that the Cr1-Cr2 bond conjugates with the Cr2-Cr3 bond, which is inconsistent with the simple understanding that 2 has a quadruple bond between Cr1 and Cr2 and no bond between Cr2 and Cr3. The symmetrical structure has a stronger Cr-X coordinate bond (X = Cl or N3) but less stable Cr3 core than does the non-symmetrical one. The relative stabilities of the symmetrical and the non-symmetrical structures are determined by the balance between stabilization energies from the Cr3 core and the Cr-X coordinate bond. All these findings show that electronic structures and Cr-Cr bonds of 1 and 2 are interesting from the viewpoint of molecular science.

Synthesis and structural characterization of arsinoamides - early transition metal (Zr and Hf) and main group metal (Al, In, Sn, and Pb) complexes

By reaction of MCl4 (M = Zr, Hf) with 2 equiv. of [(Mes2AsNPh){Li(OEt2)2}], the first group 4 metal arsinoamide complexes [(Mes2AsNPh)2MCl2(THF)] were synthesized. They feature two weak M-As interactions. After formally replacing the chloride atoms by the amido ligands [NMe2]-, a more diverse M-As interaction arises in [(Mes2AsNPh)2M(NMe2)2]: only one M-As contact can be observed with a substantially shorter distance. This type of interaction may originate from the steric effect of the substituents on the metal center. In addition, the coordination behavior of arsinoamide in main group metal chemistry was investigated. Thus, arsinoamide complexes of Al(iii), In(iii), Sn(ii) and Pb(ii) are reported. In contrast to the group 4 complexes, no M-As interaction can be detected in these four complexes.

Inverse Trans Influence in Low-Valence Actinide-Group 10 Metal Complexes of Phosphinoaryl Oxides: A Theoretical Study via Tuning Metals and Donor Ligands

The recognition and in-depth understanding of inverse trans influence (ITI) have successfully guided the synthesis of novel actinide complexes and enriched actinide chemistry. Those complexes, however, are mainly limited to the involvement of high-valence actinide and/or metal-ligand multiple bonds. Examples containing both low oxidation state actinide and metal-metal single bond remain rare. Herein, more than 20 actinide-transition metal (An-TM) complexes of phosphinoaryl oxide ligands have been designed in accordance with several experimentally known analogs, by changing the metal atoms (An = Th, Pa, U, Np, and Pu; and TM = Ni, Pd, and Pt), actinide oxidation states (IV and III) and metal-metal axial donor ligands (X = Me₃SiO, F, Cl, Br, and I). The relativistic density functional theory study of structural (trans-An-X and cis-An-O toward An-TM), bonding (topological electron/energy density), and electronic properties reveals the order of the ITI stabilizing actinide-metal bond. Computed electron affinity (EA) values, related to the electrochemical reduction, linearly correlate with experimentally measured reduction potentials. Although the same ITI order for the ligand donors was shown as in a previous study, the correlation between electrochemical reduction and the ITI was found to be weak when the actinide atoms were changed. For most complexes, the reduction is primarily of an actinide-based mechanism with minor participation of transition metal and phosphinoaryl oxide, whereas that of thorium-nickel complexes is different.

Multiple Bonds in Uranium-Transition Metal Complexes

Novel heterobimetallic complexes featuring a uranium atom paired with a first-row transition metal have been computationally predicted and analyzed using density functional theory and multireference wave function based methods. The synthetically inspired metalloligands U{(ⁱPr₂PCH₂NAr)₃tacn} (1) and U(ⁱPr₂PCH₂NPh)₃ (2) are explored in this study. We report the presence of multiple bonds between uranium and chromium, uranium and manganese, and uranium and iron. The calculations predict a 5-fold bonding between uranium and manganese in the UMn(ⁱPr₂PCH₂NPh)₃ complex, which is unprecedented in the literature.