Fast and Effective Decontamination of Aqueous Mercury by a Highly Stable Zeolitic-like Chalcogenide

(C6H15N3)1.3(NH4)1.5H1.5In3SnS8: a layered metal sulfide based on supertetrahedral T2 clusters with photoelectric response and ion exchange properties

A new layered metal sulfide, namely (C6H15N3)1.3(NH4)1.5H1.5In3SnS8 (1, C6H15N3 = N-(2-aminoethyl) piperazine), has been solvothermally synthesized and characterized. Compound 1 crystallizes in the monoclinic space group C2/c. Its structure features a two-dimensional layer of {In3SnS8}n3n- with the (4,4) topology net, which is formed by interlinking supertetrahedral T2 clusters as secondary building units. Band structure calculations revealed that 1 had a band gap of 2.7 eV. The photoelectric response of 1 showed steady and reversible on/off cycles with an "on" state of 121.13 nA cm-2. Moreover, the activation of 1 by replacing the sluggish organic cations with harder K+ ions endowed the material with improved adsorption performances for Sr2+ ions from aqueous solutions.

Rapid and Selective Uptake of Radioactive Cesium from Water by a Microporous Zeolitic-like Sulfide

The fast and efficient removal of 137Cs+ ions from water is of great significance for the further treatment and disposal of highly active nuclear waste. Hitherto, although many layered metal sulfides have been proven to be very effective in capturing aqueous cesium, three-dimensional (3D) microporous examples have rarely been explored, especially compounds that are systematically used to study cesium ion exchange behaviors. In this paper, we present detailed Cs+ ion exchange properties of a 3D, microporous, zeolitic-like sulfide, namely K@GaSnS-1, in different conditions. Isotherm studies indicate that K@GaSnS-1 has a high cesium saturation capacity of 249.3 mg/g. In addition, it exhibits rapid sorption kinetics, with an equilibrium time of only 2 min. Further studies show that K@GaSnS-1 also displays a strong preference and good selectivity for cesium, with the highest distribution coefficient Kd value up to 3.53 × 104 mL/g. Also noteworthy is that the excellent cesium ion exchange properties are well-maintained despite acidic, basic, and competitive multiple-component environments. More importantly, the Cs+-exchanged products can be easily eluted and regenerated by a low-cost and eco-friendly method. These merits demonstrated by K@GaSnS-1 render it very promising in the effective and efficient separation of radioactive cesium from nuclear waste.

Post-synthetic thiol modification of covalent organic frameworks for mercury(II) removal from water

Various materials have been developed for environmental remediation of mercury ion pollution. Among these materials, covalent organic frameworks (COFs) can efficiently adsorb Hg(II) from water. Herein, two thiol-modified COFs (COF-S-SH and COF-OH-SH) were prepared, through the reaction between 2,5-divinylterephthalaldehyde and 1,3,5-tris-(4-aminophenyl)benzene, followed by post-synthetic modification using bis(2-mercaptoethyl) sulfide and dithiothreitol, respectively. The modified COFs showed excellent Hg(II) adsorption abilities with maximum adsorption capacities of 586.3 and 535.5 mg g^-1 for COF-S-SH and COF-OH-SH, respectively. The prepared materials showed excellent selective absorbability for Hg(II) against multiple cationic metals in water. Unexpectedly, the experimental data showed that both co-existing toxic anionic diclofenac sodium (DCF) and Hg(II) performed positive effect for capturing another pollutant by these two modified COFs. Thus, a synergistic adsorption mechanism between Hg(II) and DCF on COFs was proposed. Moreover, density functional theory calculations revealed that synergistic adsorption occurred between Hg(II) and DCF, which resulted in a significant reduction in the adsorption system's energy. This work highlights a new direction for application of COFs to simultaneous removal of heavy metals and co-existing organic pollutants from water.

Selective removal of aqueous Hg2+ by magnetic composites sulfur-containing on the hyper-branched surface: Characterization, performance and mechanism

The adsorbents with recyclable, large adsorption capacity and selective adsorption can effectively remove the pollution and harm of heavy metal ions in water. Therefore, two magnetic composites containing sulfur (MCP-S4 and MCP-S8) on the hyper-branched surface were prepared, furthermore, their structures were characterized and adsorption performance was analyzed by FTIR, XRD, TGA, BET, SEM, TEM, VSM and ICP. The results showed that both MCP-S4 and MCP-S8 had superparamagnetism with saturation susceptibility of 22.10 and 22.26 emu/g, and owned a specific surface area of 11.394 and 11.235 m²/g, respectively. MCP-S4 and MCP-S8 could selectively adsorb Hg²⁺ with the exist of Fe³⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, and Al³⁺ in solution. The adsorption kinetics accorded with pseudo-second-order model and Boyd film diffusion model, and the adsorption isotherm was fitted better with Langmuir isotherm model and D-R model, furthermore, the adsorption was an entropic-increasing and endothermic process. The removal rate of Hg²⁺ from simulated sewage by the two materials was more than 91%, and the adsorption retention rate was more than 85% after five adsorption-desorption cycles. The adsorption mechanism was analyzed by comparing the changes of FTIR, EDS and XPS spectra before and after adsorption. It was found that functional groups (C-N, CONH, CS, SH) could form stable chelates with Hg²⁺, which was the main reason why MCP-S4 and MCP-S8 could adsorb Hg²⁺ selectively, furthermore, S atoms of CS and -SH played a leading role in the process of adsorption. In addition, DFT calculation was also used as an auxiliary means to verify the adsorption mechanism.

Effective Enrichment of Low-Concentration Rare-Earth Ions by Three-Dimensional Thiostannate K2Sn2S5

Rare-earth elements (REEs) in industrial wastewaters have great value for recycling and reuse, but their characteristic of low concentration poses a challenge to an efficient enrichment from wastewaters. In recent years, thiometallates featuring two-dimensional layers have shown great potential in the enrichment of REEs via the ion-exchange process. However, investigations on thiometallates featuring three-dimensional anionic frameworks for the recovery of REEs have not been reported. Herein, K₂Sn₂S₅ (KTS-2), a thiostannate possessing a three-dimensional porous framework, was chosen as an ion-exchange material for capturing REEs from an aqueous solution. Indeed, KTS-2 exhibited excellent ion-exchange performance for all 16 REEs (except Pm). Specifically, KTS-2 displayed a high capture capacity (232.7 ± 7.8 mg/g) and a short equilibrium time (within 10 min) for Yb³⁺ ions. In addition, KTS-2 had a high distribution coefficient for Yb³⁺ ions (K_d > 10⁵ mL/g) in the presence of excessive interfering ions. Impressively, KTS-2 could reach removal rates of above 95% for all 16 REEs in a large quantity of wastewater with low initial concentration (∼7 mg/L). Moreover, KTS-2 could be used as an eco-friendly material for ion exchange of REEs, since the released K⁺ cations would not cause secondary pollution to the water solution.

Thiol/methylthio-functionalized porous aromatic frameworks for simultaneous capture of aromatic pollutants and Hg(II) from water

Simultaneously capturing organic pollutants and heavy metal can greatly reduce the water remediation time and cost, however it is still a great challenge presently. Herein, two novel thiol/methylthio-functionalized porous aromatic frameworks were synthesized as sorbents via the Sonogashira-Hagihara reaction of 1,3,5-triethynylbenzene and 1,3,5-tris(4-bromophenyl) benzene, the subsequent chloromethylation of the phenyl rings, and the final nucleophile substitution of -Cl groups by NaSH/NaSMe. These two sorbents were characterized by FT-IR spectra, energy dispersive X-ray spectra, scanning electron microscope, nitrogen adsorption analysis, thermo-gravimetric analysis, and elemental analyses. Adsorption experiments displayed that new sorbents had high uptake abilities and fast adsorption kinetics for aromatic pollutants and mercury (II) (Hg(II)). The maximum adsorption capacity (Q_max) of toluene and m-xylene on both new sorbents were 531.9-571.4 mg/g with the kinetic binding rate constants (k_obs) of 0.00276-0.02422 g/mg/min, and the Q_max values of Hg(II) were 148.1-180.3 mg/g with k_obs of 0.00592-0.01573 g/mg/min. Moreover, new sorbents indicated high simultaneous uptake abilities for these pollutants with good reusability, and finally they were successfully applied to the simultaneous remediation of these pollutants in two simulated sewages with high and low concentration, indicating their great practical application potential in wastewater remediation.

Fast and Selective Removal of Aqueous Uranium by a K+-Activated Robust Zeolitic Sulfide with Wide pH Resistance

For the nuclear industry, uranium is not only an important strategic resource but also a serious global contaminant with radiotoxicity and high chemotoxicity. It is very important to efficiently capture uranium from complex aqueous solutions for further treatment and disposal of nuclear wastes. Herein, we first demonstrate the suitability of a three-dimensional (3D) water-stable K⁺-exchanged zeolitic sulfide, namely K@GaSnS-1, for the remediation of radioactive and toxic uranium by ion exchange. In comparison to the pristine compound GaSnS-1, the K⁺-activated porous sulfide K@GaSnS-1 exhibits faster [UO₂]²⁺ ion uptake kinetics, following the pseudo-second-order adsorption model. Further studies indicate that K@GaSnS-1 shows high exchange capacity (q_m^U = 147.6 mg/g) and wide pH resistance (pH 2.75-10.87). In particular, it can efficiently capture [UO₂]²⁺ ion even when excessive amounts of Na⁺, K⁺, Mg²⁺, and Ca²⁺ ions are present. The highest distribution coefficient value K_d, signifying the affinity and selectivity for [UO₂]²⁺ ion, reaches as high as 1.24 × 10⁴ mL/g. More importantly, the uranium in corresponding exchanged samples can be facilely and effectively eluted by a low-cost and eco-friendly method. These merits of K@GaSnS-1 make it promising for the effective and selective removal of uranium from complex contaminated water.