Resonance Raman Spectroscopy and Density Functional Theory Calculations on Ferrous Porphyrin Dioxygen Adducts with Different Axial Ligands: Correlation of Ground State Wave Function and Geometric Parameters with Experimental Vibrational Frequencies

α-MnO2/FeCo-LDH on Nickel Foam as an Efficient Electrocatalyst for Water Oxidation

The ever-expanding human societies on the one hand and the diminishing fossil fuel resources on the other have driven man to find a suitable, cheap, clean, and accessible source of energy. Water splitting is a good solution to this crisis. Because of the slow kinetics of water oxidation reaction, it is important to select efficient and durable electrocatalysts to improve the reaction kinetics. In this research, α-MnO₂/FeCo-LDH catalysts on nickel foam were developed for water oxidation, which exhibited good catalytic performance and stability in a 0.1 M KOH solution. The electrocatalysts were synthesized by hydrothermal methods and characterized by XRD, FTIR, Raman, SEM, TEM, EDS, and MAP techniques. The proposed modified electrode has large exchange current, low overpotential, and small Tafel slope. Here, only an overpotential of 210 mV is required to achieve a current density of 5 mA cm² with a Tafel slope of 70.4 mV dec^-1 in an alkaline solution.

Selectivity in Electrochemical CO2 Reduction

The electrocatalytic CO₂ reduction reaction (CO₂RR) to generate fixed forms of carbons that have commercial value is a lucrative avenue to ameliorate the growing concerns about the detrimental effect of CO₂ emissions as well as to generate carbon-based feed chemicals, which are generally obtained from the petrochemical industry. The area of electrochemical CO₂RR has seen substantial activity in the past decade, and several good catalysts have been reported. While the focus was initially on the rate and overpotential of electrocatalysis, it is gradually shifting toward the more chemically challenging issue of selectivity. CO₂ can be partially reduced to produce several C₁ products like CO, HCOOH, CH₃OH, etc. before its complete 8e^-/8H⁺ reduction to CH₄. In addition to that, the low-valent electron-rich metal centers deployed to activate CO₂, a Lewis acid, are prone to reduce protons, which are a substrate for CO₂RR, leading to competing hydrogen evolution reaction (HER). Similarly, the low-valent metal is prone to oxidation by atmospheric O₂ (i.e., it can catalyze the oxygen reduction reaction, ORR), necessitating strictly anaerobic conditions for CO₂RR. Not only is the requirement of O₂-free reaction conditions impractical, but it also leads to the release of partially reduced O₂ species such as O₂^-, H₂O₂, etc., which are reactive and result in oxidative degradation of the catalyst.In this Account, mechanistic investigations of CO₂RR by detecting and, often, chemically trapping and characterizing reaction intermediates are used to understand the factors that determine the selectivity in CO₂RR. The spectroscopic data obtained from different intermediates have been identified in different CO₂RR catalysts to develop an electronic structure selectivity relationship that is deemed to be important for deciding the selectivity of 2e^-/2H⁺ CO₂RR. The roles played by the spin state, hydrogen bonding, and heterogenization in determining the rate and selectivity of CO₂RR (producing only CO, only HCOOH, or only CH₄) are discussed using examples of both iron porphyrin and non-heme bioinspired artificial mimics. In addition, strategies are demonstrated where the competition between CO₂RR and HER as well as CO₂RR and ORR could be skewed overwhelmingly in favor of CO₂RR in both cases.

The Biologically Relevant Coordination Chemistry of Iron and Nitric Oxide: Electronic Structure and Reactivity

Nitric oxide (NO) is an important signaling molecule that is involved in a wide range of physiological and pathological events in biology. Metal coordination chemistry, especially with iron, is at the heart of many biological transformations involving NO. A series of heme proteins, nitric oxide synthases (NOS), soluble guanylate cyclase (sGC), and nitrophorins, are responsible for the biosynthesis, sensing, and transport of NO. Alternatively, NO can be generated from nitrite by heme- and copper-containing nitrite reductases (NIRs). The NO-bearing small molecules such as nitrosothiols and dinitrosyl iron complexes (DNICs) can serve as an alternative vehicle for NO storage and transport. Once NO is formed, the rich reaction chemistry of NO leads to a wide variety of biological activities including reduction of NO by heme or non-heme iron-containing NO reductases and protein post-translational modifications by DNICs. Much of our understanding of the reactivity of metal sites in biology with NO and the mechanisms of these transformations has come from the elucidation of the geometric and electronic structures and chemical reactivity of synthetic model systems, in synergy with biochemical and biophysical studies on the relevant proteins themselves. This review focuses on recent advancements from studies on proteins and model complexes that not only have improved our understanding of the biological roles of NO but also have provided foundations for biomedical research and for bio-inspired catalyst design in energy science.

Ultraviolet resonance Raman spectroscopy with a continuously tunable picosecond laser: Application to the supramolecular ligand guanidiniocarbonyl pyrrole (GCP)

We present a UVRR spectroscopy setup which is equipped with a picosecond pulsed laser excitation source continuously tunable in the 210-2600 nm wavelength range. This laser source is based on a three-stage optical parametric amplifier (OPA) pumped by a bandwidth-compressed second harmonic output of an amplified Yb:KGW laser. It provides <15 cm^-1 linewidth pulses below 270 nm, which is sufficient for resolving Raman lines of samples in condensed phase studies. For demonstrating the capability of this tunable setup for UVRR spectroscopy we present its application to the artificial ligand guanidiniocarbonyl pyrrole (GCP), a carboxylate binder used in peptide and protein recognition. A UVRR excitation study in the range 244-310 nm was performed for identifying the optimum laser excitation wavelength for UVRR spectroscopy of this ligand (λ_max = 298 nm) at submillimolar concentrations (400 µM) in aqueous solution. The optimum UVRR spectrum is observed for laser excitation with λ_exc = 266 nm. Only in the relatively narrow range of λ_exc = 266-275 nm UVRR spectra with a sufficiently high signal-to-noise ratio and without severe interference from autofluorescence (AF) were detectable. At longer excitation wavelengths the UVRR signal is masked by AF. At shorter excitation wavelengths the UVRR spectrum is sufficiently separated from the AF, but the resonance enhancement is not sufficient. The presented tunable UVRR setup provides the flexibility to also identify optimum conditions for other supramolecular ligands for peptide/protein recognition.

O2 Reduction by Iron Porphyrins with Electron Withdrawing Groups: To Scale or not to Scale

Iron porphyrins are synthesized by systematically introducing electron withdrawing groups (EWGs) on pyrroles to evaluate the relationship between rate (k) and overpotential (η). The results indicate that while EWGs lead...

Alternative modes of O2 activation in P450 and NOS enzymes are clarified by DFT modeling and resonance Raman spectroscopy

The functions of heme proteins are modulated by hydrogen bonds (H-bonds) directed at the heme-bound ligands by protein residues. When the gaseous ligands CO, NO, or O2 are bound, their activity is strongly influenced by H-bonds to their atoms. These H-bonds produce characteristic changes in the vibrational frequencies of the heme adduct, which can be monitored by resonance Raman spectroscopy and interpreted with density functional theory (DFT) computations. When the protein employs a cysteinate proximal ligand, bound O2 becomes particularly reactive, the course of the reaction being controlled by H-bonding and proton delivery. In this work, DFT modeling is used to examine the effects of H-bonding to either the terminal (Ot) or proximate (Op) atom of methylthiolate-Fe(II)porphine-O2, as well as to the thiolate S atom. H-bonds to Op produce a positive linear correlation between ν(Fe - O) and ν(O - O), because they increase the sp2 character of Op, weakening both the Fe - O and O - O bonds. H-bonds to Ot produce a negative correlation, because they increase Fe backbonding, strengthening the Fe - O but weakening the O - O bond. Available experimental data accommodate well to the computed pattern. In particular, this correspondence supports the interpretation of cytochrome P450 data by Kincaid and Sligar [M. Gregory, P.J. Mak, S.G. Sligar, J.R. Kincaid, Angew. Chem. Int. Ed. 125 (2013) 5450-5453], involving steering between hydroxylation and lyase reaction channels by differential H-bonds. Similar channeling between the first and second steps of the nitric oxide synthase reaction is likely.

Unraveling the structural stability and the electronic structure of ThO2 clusters

Unraveling the correlations between the geometry, the relative energy and the electronic structure of actinide oxide nanostructures is crucial for a better control of their size, shape and properties.

DFT Fea3-O/O-O Vibrational Frequency Calculations over Catalytic Reaction Cycle States in the Dinuclear Center of Cytochrome c Oxidase

Density functional vibrational frequency calculations have been performed on eight geometry optimized cytochrome c oxidase (CcO) dinuclear center (DNC) reaction cycle intermediates and on the oxymyoglobin (oxyMb) active site. The calculated Fe-O and O-O stretching modes and their frequency shifts along the reaction cycle have been compared with the available resonance Raman (rR) measurements. The calculations support the proposal that in state A[Fea33+-O2-•···CuB+] of CcO, O2 binds with Fea32+ in a similar bent end-on geometry to that in oxyMb. The calculations show that the observed 20 cm-1 shift of the Fea3-O stretching mode from the PR to F state is caused by the protonation of the OH- ligand on CuB2+ (PR[Fea34+═O2-···HO--CuB2+] → F[Fea34+═O2-···H2O-CuB2+]), and that the H2O ligand is still on the CuB2+ site in the rR identified F[Fea34+═O2-···H2O-CuB2+] state. Further, the observed rR band at 356 cm-1 between states PR and F is likely an O-Fea3-porphyrin bending mode. The observed 450 cm-1 low Fea3-O frequency mode for the OH active oxidized state has been reproduced by our calculations on a nearly symmetrically bridged Fea33+-OH-CuB2+ structure with a relatively long Fea3-O distance near 2 Å. Based on Badger's rule, the calculated Fea3-O distances correlate well with the calculated νFe-O-2/3 (νFe-O is the Fea3-O stretching frequency) with correlation coefficient R = 0.973.