Cycloaddition of CO2 with an Epoxide-Bearing Oxindole Scaffold by a Metal–Organic Framework-Based Heterogeneous Catalyst under Ambient Conditions

MIL-101(Cr)/aminoclay nanocomposites for conversion of CO2 into cyclic carbonates

We present the use of an amine functionalized two-dimensional clay i.e., aminoclay (AC), in the chemistry of a three-dimensional metal-organic framework (MOF) i.e., MIL-101(Cr), to prepare MIL-101(Cr)/AC composites, which are exploited as catalysts for efficient conversion of CO2 gas into cyclic carbonates under ambient reaction conditions. Three different MOF nanocomposites, denoted as MIL-101(Cr)/AC-1, MIL-101(Cr)/AC-2, and MIL-101(Cr)/AC-3, were synthesized by an in situ process by adding different amounts of AC to the precursor solutions of the MIL-101(Cr). The composites were characterized by various techniques such as FT-IR, PXRD, FESEM, EDX, TGA, N2 adsorption, as well as CO2 and NH3-TPD measurements. The composites were exploited as heterogeneous catalysts for CO2 cycloaddition reactions with different epoxides and the catalytic activity was investigated at atmospheric pressure under solvent-free conditions. Among all the materials, MIL-101(Cr)/AC-2 shows the best catalytic efficiency under the optimized conditions and exhibits enhanced efficacy compared to various MIL-101(Cr)-based MOF catalysts, which typically need either high temperature and pressure or a longer reaction time or a combination of all the parameters. The present protocol using MIL-101(Cr)/AC-2 as the heterogeneous catalyst gives 99.9% conversion for all the substrates into the products at atmospheric pressure.

Prediction of the capture and utilization of atmospheric acidic gases by azo-based square-pillared fluorinated MOFs

More than the permissible limit of acidic gases like CO2, SO2, and NO2 in the atmosphere are responsible for the formation of acid rain, the greenhouse effect and many other undesirable environmental hazards. So, the capture and utilization of these gases are essential for mankind. Herein, we proposed an azo-based square pillared MOF, [Ni(MF5)(1,2-bis(4-pyridy)diazene)2]n, with the CUS metal site, i.e. M = Al/Fe, for the selective capture and conversion of acidic gas molecules into commodity chemicals such as cyclic carbonate, sulphite and nitrite. With the aid of Density Functional Theory (DFT), [Ni(MF5)(1,2-bis(4-pyridy)diazene)2]n has been optimized, and the specific force field is derived via guest-host interaction. The Grand Canonical Monte Carlo (GCMC) simulation has been used to explore the guest-host interactions over a wide range of pressures, and their respective stability under pre-humidification is evaluated. The adsorption prediction reveals that MFFIVE-Ni-apy have a higher adsorptive capacity (37.1 mmol g-1), and especially ALFFIVE-Ni-apy possesses a higher affinity towards guest molecules (CO2, SO2) rather than FEFFIVE-Ni-apy. Additionally, the adsorption of gases in the presence of humidity reveals that ALFFIVE-Ni-apy has an optimal adsorption capacity for all investigated acidic gases even at 38.5 RH%. The absorbed acidic gases on MFFIVE-Ni-apy were used for the theoretical investigations on cycloaddition with the aid of DFT as an application perspective of the toxic gases instead of expelling into atmosphere. The Climbing Image Nudged Elastic Band (CI-NEB) approach was used to discover the transition state in this scenario, in which the cycloaddition of adsorbed CO2, SO2, and NO2 gases with epoxides leads to the formation of cyclic carbonates, sulphites, and nitrates, respectively.

Coordination Unsaturation and Basic Site-Immobilized Nanochannel in a Chemorobust MOF for 3-Fold-Increased High-Temperature Selectivity and Fixation of CO2 under Mild Conditions with Nanomolar Recognition of Roxarsone

A multifaceted metal-organic framework (MOF) with task-specific site-engineered pores can promise high-temperature and moisture-tolerant capture and non-redox fixation of CO2 under mild conditions as well as ultrasensitive detection of carcinogenic contaminants in water. Herein, we report a pillar-bilayered MOF that holds a nanochannel with contrasting functionalities for both these sustainable applications with improved performance characteristics. The twofold entangled robust framework exhibits CO2 adsorption at elevated temperatures with considerable MOF-gas interaction. Interestingly, CO2 selectivity unveils nearly a 3-fold improvement upon the rise of temperature, affording a CO2/N2 value of 820 at 313 K, which outperforms many porous adsorbents. Additionally, breakthrough simulation establishes complete separation and attests the potential of this MOF in the separation of flue gas mixture. Importantly, minor CO2 loss during multiple capture-release cycles and under a relative humidity of 75% promise practical usability of the material. Density functional theory (DFT) not only portrays the atomistic level snapshots of temperature-triggered CO2 inclusion inside this microporous vessel alongside the role of diverse CO2-philic sites but also validates the basis of N2-phobicity of an azo-functionalized linker on such increased selectivity. The guest-free MOF further demonstrates non-redox and recyclable CO2 fixation with wide epoxide tolerance under solvent-free mild conditions and even works at atmospheric pressure and room temperature. The crucial roles of high-density acid-base sites in both adsorption and catalysis are supported by control experiments and by comparing the activity of an unfunctionalized MOF. The hydrolytic stability and strong luminescence signature benefit the framework in aqueous-phase selective and fast responsive detection of detrimental roxarsone (ROX) with high quenching (7.56 × 104 M-1) and very low sensitivity (68 nM). Apart from varying degrees of an energy-transfer mechanism, the fluorosensing of ROX is comprehensively supported by in-depth DFT studies that manifest alteration of MOF energy levels in the presence of organoarsenic compounds and depict MOF-analyte supramolecular interactions.

Redox-Active and Urea-Engineered-Entangled MOFs for High-Efficiency Water Oxidation and Elevated Temperature Advanced CO2 Separation Cum Organic-Site-Driven Mild-Condition Cycloaddition

Development of the multifaceted metal-organic framework (MOF) with in situ engineered task-specific sites can promise proficient oxygen evolution reaction (OER) and high-temperature adsorption cum mild-condition fixation of CO₂. In fact, effective assimilation of these attributes onto a single material with advance performance characteristics is practically imperative in view of renewable energy application and carbon-footprint reduction. Herein, we developed a three-fold interpenetrated robust Co(II) framework that embraces both redox-active and hydrogen-bond donor moieties inside the microporous channel. The activated MOF demonstrates notable OER catalysis in alkaline medium via quasi-reversible Co²⁺/Co³⁺ couple and unveils low overpotential with impressive 53.5 mV/dec Tafel slope that overpowers some benchmark, commercial, as well as contemporary materials. In particular, significantly increased turnover frequency (3.313 s^-1 at 400 mV) and fairly low charge-transfer resistance (3.02 Ω) compared to Co₃O₄, NiO, and majority of redox-active MOFs together with 91% Faradaic efficiency and notable framework durability after multiple OER cycles endorse high-performance water oxidation. Pore-wall decked urea groups benefit appreciable CO₂ adsorption even at elevated temperatures with considerable MOF-CO₂ interactions and exhibit recurrent capture-release cycles at diverse temperatures. Interestingly, CO₂ selectivity displays radical upsurge with temperature rise, affording 40% improved CO₂/N₂ value of 200 at 313 K, which outperforms many porous adsorbents and delineates real-time CO₂ scavenging potential. The guest-free MOF effectively catalyzes solvent-free CO₂ cycloaddition with broad substrate tolerance and satisfactory reusability under relatively mild condition. Opposed to the common Lewis acid-mediated reaction, two-point hydrogen-bonding activates the substrate, as supported from controlled experiments, juxtaposing the performance of an un-functionalized MOF and fluorescence modification-derived framework-epoxide interaction, providing valuable insights on unconventional cycloaddition route in the MOF.

Investigation of the Influence of Functionalization Strategy on Urea 2D MOF Catalytic Performance

Urea-functionalized MOFs with unique properties have recently been used as efficient platforms to conduct organocatalytic reactions. To gain more insight into the key factors which govern an efficient organocatalytic reaction in urea-MOFs, two different urea-containing 2D MOFs TMU-58 ([Zn(L1)(oba)].CH₃CN) and TMU-83 ([Zn(L2)(oba)].DMF), where L1 = (1E,5E)-1,5-bis(1-(pyridine-4-ylethylidene)carbonohydrazide, L2 = (1E,5E)-1,5-bis(1-(pyridine-4-ylmethylene)carbonohydrazide, and oba = 4,4'-oxybisbenzoic acid, with abundant accessible active sites, were selected and examined in the methanolysis of styrene oxide. TMU-58 with the ability to form a two-point H-bond with different substrates revealed a high organocatalytic efficiency in the regioselective ring opening of styrene oxide. The catalytic activation of epoxide oxygen by the urea N-H functional sites, followed by the nucleophilic attack of methanol at the benzylic carbon led to the formation of 2-methoxy-2-phenylethanol as the major product. DFT calculations were also performed to investigate the acidic strength of the urea hydrogens in both TMU-58 and TMU-83 structures as a major factor to conduct an efficient catalytic reaction. The results indicated the more acidic nature of the urea hydrogens in TMU-83; however, its catalytic efficiency was remarkably reduced due to the inappropriate orientation of the active interaction sites within the framework revealing the importance of proper orientation of the urea hydrogens in conducting an efficient organocatalytic reaction. The current study provides a comparative study on the function-property relationship in 2D MOF assemblies which has not been explored so far.

Effective Dual-Functional Metal-Organic Framework (DF-MOF) as a Catalyst for the Solvent-Free Cycloaddition Reaction

A new porous metal-organic framework, [Co (oba) (bpdh)]·(DMF) (TMU-63), containing accessible nitrogen-rich diazahexadiene groups was successfully prepared with the solvothermal assembly of 5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene (4-bpdh), 4,4'-oxybis(benzoic) acid (oba), and Co(II) ions. The combination of Lewis basic functional groups and porosity leads to high performance in CO₂ adsorption and conversion in the cycloaddition reaction of epoxides under solvent-free conditions. To further enhance the catalytic efficiency of TMU-63, we introduced a highly acidic malonamide ligand into the structure via solvent-assisted ligand exchange (SALE) as a postsynthesis method. Incorporating different percentages of N¹,N³-di(pyridine-4-yl) malonamide linker (4-dpm) into TMU-63 created a new porous structure. Powder X-ray diffraction (PXRD) and NMR spectroscopy confirmed that 4-bpdh was successfully replaced with 4-dpm in the daughter MOF, TMU-63S. The catalytic activity of both MOFs was confirmed by significant amounts of CO₂ cycloaddition of epoxides under solvent-free conditions. The catalytic cycloaddition activities were found to be well-correlated with the Lewis base/Brønsted acid distributions of the materials examined in the TMU-63S series, showing that the concurrent presence of both acid and base sites was desirable for high catalytic activity. Furthermore, the heterogeneous catalysts could easily be separated out from the reaction mixtures and reused four times without loss of catalytic activity and with no structural deterioration.

Guanidyl-implanted UiO-66 as an efficient catalyst for the enhanced conversion of carbon dioxide into cyclic carbonates

The development of heterogeneous catalysts for promoting epoxide cycloaddition with carbon dioxide is highly desirable for recycling CO₂ and achieving the goal of carbon neutrality. Herein, we designed and synthesized Zr-based metal organic frameworks (MOFs) by implanting functional guanidyl into the framework via mixing different molar ratios of 4-guanidinobenzoic acid (Gua) with 1,4-benzenedicarboxylic acid (BDC). Consequently, a small sized Zr-MOF (∼350 nm) can be prepared by implanting Gua with 20% molar ligands, denoted as UiO-66-Gua_0.2(s). Compared to large sized and different guanidyl Zr-MOFs, UiO-66-Gua_0.2(s) exhibited an optimal activity on catalyzing epoxide cycloaddition with CO₂ in the presence of the Bu₄NBr cocatalyst. A yield of 97% for the product of chloropropene carbonate was achieved at 90 °C under 1 atm CO₂. The great performance of UiO-66-Gua_0.2(s) might be attributed to the synergistic effect of guanidyl groups as hydrogen-bond donors and Zr centers acting as Lewis-acidic sites. In addition, the heterogeneous catalyst of UiO-66-Gua_0.2(s) exhibited a great versatility towards converting other epoxides and a satisfactory recyclability for five consecutive runs. Moreover, a plausible reaction mechanism has been proposed for UiO-66-Gua_0.2(s) in promoting CO₂ epoxide cycloaddition reactions.

Nanocage-based {In2Tm2}-organic framework for efficiently catalyzing the cycloaddition reaction of CO2 with epoxides and Knoevenagel condensation

The combination of [In2Tm2(μ2-OH)2(CO2)10(H2O)2] clusters and H5BDCP ligand generated a highly robust nanoporous MOF with high catalytic performance in the cycloaddition reaction of epoxides with CO2 and Knoevenagel condensation.

Study on Selected Metal-Organic Framework-Based Catalysts for Cycloaddition Reaction of CO2 with Epoxides: A Highly Economic Solution for Carbon Capture and Utilization

The level of carbon dioxide in the atmosphere is growing rapidly due to fossil fuel combustion processes, heavy oil, coal, oil shelter, and exhausts from automobiles for energy generation, which lead to depletion of the ozone layer and consequently result in global warming. The realization of a carbon-neutral environment is the main focus of science and academic researchers of today. Several processes were employed to minimize carbon dioxide in the air, some of which include the utilization of non-fossil sources of energy like solar, nuclear, and biomass-based fuels. Consequently, these sources were reported to have a relatively high cost of production and maintenance. The applications of both homogeneous and heterogeneous processes in carbon capture and storage were investigated in recent years and the focus now is on the conversion of CO2 into useful chemicals and compounds. It was established that CO2 can undergo cycloaddition reaction with epoxides under the influence of special catalysts to give cyclic carbonates, which can be used as value-added chemicals at a different level of pharmaceutical and industrial applications. Among the various catalysts studied for this reaction, metal-organic frameworks are now on the frontline as a potential catalyst due to their special features and easy synthesis. Several metal-organic framework (MOF)-based catalysts were studied for their application in transforming CO2 to organic carbonates using epoxides. Here, we report some recent studies of porous MOF materials and an in-depth discussion of two repeatedly used metal-organic frameworks as a catalyst in the conversion of CO2 to organic carbonates.

Efficient Cycloaddition of CO2 and Aziridines Activated by a Quadruple-Interpenetrated Indium-Organic Framework as a Recyclable Catalyst

On the basis of the global warming effect, it is of great significance to convert CO₂ into the high value-added products oxazolidinones, but investigations on main-group-based metal-organic frameworks (MOFs) as heterogeneous catalysts still have not been reported so far. In this work, a quadruple-interpenetrated porous indium-based MOF, {[NH₂(CH₃)₂][In(CPT)₂]·3CH₃CN·3DMA}_n (1), is constructed from the organic ligand 3,5-bis(4'-carboxyphenyl)-1,2,4-triazole through solvothermal reactions, and N₂ adsorption proves that the framework has a high Brunauer-Emmett-Teller surface areas with 2024 m²/g. The catalytic research on CO₂ conversion reveals that compound 1 has high reactivity for the cycloaddition of CO₂ with aziridines, and the product 3-ethyl-5-phenyloxazolidin-2-one can be obtained with a yield of 99% under mild conditions. In addition, 1 exhibits excellent activity for different kinds of substrates and can be reused at least five cycles without any significant deactivation, suggesting that 1 is a potential candidate for the chemical conversion of CO₂ and aziridines. Mechanistic explorations indicate that the high efficiency of 1 is attributed to the indium center in the framework as a Lewis acid site, and the large porosity can enrich substrates. Importantly, 1 behaved as the first main-group MOF-based catalyst in the reported coupling reaction of CO₂ with aziridines.

Non-Noble-Metal Metal-Organic-Framework-Catalyzed Carboxylative Cyclization of Propargylic Amines with Atmospheric Carbon Dioxide under Ambient Conditions

The coupling reaction of propargylic amines and carbon dioxide (CO₂) to synthesize 2-oxazolidinones is an important reaction in industrial production, and yet harsh reaction conditions and noble-metal catalysts are often required to achieve high product yields. Herein, one novel noble-metal-free three-dimensional framework, [Mg₃Cu₂I₂(IN)₄(HCOO)₂(DEF)₄]_n (1), assembled by magnesium and copper clusters was synthesized and applied to this reaction. Compound 1 displays excellent solvent stability. Importantly, 1, acting as heterogeneous catalyst, can highly catalyze the cyclization of propargylic amines with CO₂ under atmospheric pressure at room temperature, which can be recycled at least five times without an obvious decrease of the catalytic activity. NMR spectroscopy, coupled with ¹³C-isotope- and deuterium-labeling experiments, clearly clarifies the mechanism of this catalytic system: CO₂ was successfully captured and converted to the product of 2-oxazolidinones, the C≡C bond of propargylic amines can be effectively activated by 1, and proton transfer was involved in the reaction process. Density functional theory calculations are further conducted to uncover the reaction path and the crucial role of compound 1 during the reaction.

Controlled assembly of cobalt embedded N-doped graphene nanosheets (Co@NGr) by pyrolysis of a mixed ligand Co(ii) MOF as a sacrificial template for high-performance electrocatalysts

The development of high-efficiency and durable bifunctional electrocatalysts is an important and challenging topic in the area of energy storage/conversion. Herein, we prepared metallic cobalt nanoparticle decorated N-doped graphitic sheets (Co@NGr) by adopting facile pyrolysis of a mixed ligand cobalt-based MOF (CoMOF-2) as a sacrificial template displaying good OER and HER activity. The catalytic material harvested at three different pyrolytic temperatures was characterized by various analytical methods such as PXRD, SEM, TEM, Raman, and XPS analyses. The catalytic activity of the obtained hybrid composite materials towards oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) was studied. Co@NGr-900 was found to be an efficient bifunctional electrocatalyst and 10 mA cm⁻² current density was afforded at an overpotential of 390 mV for OER and 340 mV for HER respectively. This study provides insight for the development of cost-effective nonprecious element-based electrocatalysts for water splitting which has relevance in energy storage and conversion. Catalytic performance is governed by the synergistic compositional effect of metallic cobalt/nitrogen-doping in the graphitic carbon increasing the electrical conductivity/active sites of the composite material.

Synthesis, characterization and application of monodispersed cobalt embedded nitrogen-doped graphene derived from a cobalt-based mixed ligand MOF by pyrolysis as a bifunctional electrocatalyst for water splitting have been investigated.

Zn(II)/Cd(II)-Based Metal-Organic Frameworks as Bifunctional Materials for Dye Scavenging and Catalysis of Fructose/Glucose to 5-Hydroxymethylfurfural

Functional neutral metal-organic frameworks (MOFs) {[M(5OH-IP)(L)]}_n [M = Zn(II) for ADES-4; Cd(II) for ADES-5; 5OH-IP = 5-hydroxyisophthalate; L = (E)-N'-(pyridin-3-ylmethylene)nicotinohydrazide) have been synthesized by a diffusion/conventional reflux/mechanochemical method and characterized by various analytical techniques. Crystals were harvested by a diffusion method, and single-crystal X-ray diffraction (SXRD) analysis revealed that an adjacent [M₂(COO)₂]_n ladder chain generates isostructural two-dimensional network motifs by doubly pillaring via L. The bulk-phase purity of ADES-4 and ADES-5 synthesized by a versatile synthetic approach has been recognized by the decent match of powder X-ray diffraction patterns with the simulated one. Both ADES-4 and ADES-5 showed selective adsorption of cationic dyes methylene blue (MB), methyl violet (MV), and rhodamine B (RhB) over anionic dye methyl orange (MO) from water with good uptake and rapid adsorption. Utilization of ADES-4 as a chromatographic column filler for adsorptive removal of individual cationic dyes as well as a mixture of dyes has been demonstrated from the aqueous phase. Interestingly, ADES-4 is reusable with good stability, and it showed a dye desorption phenomenon in methanol. The probable mechanism of cationic dye removal based on insight from structural information and plausible supramolecular interactions has also been explored. Both MOFs also showed efficient catalytic transformation of fructose and glucose into the high-value chemical intermediate 5-hydroxymethylfurfural of industrial significance.

Ring-opening hydrolysis of spiro-epoxyoxindoles using a reusable sulfonic acid functionalized nitrogen rich carbon catalyst

Controlling the product selectivity of a ring-opening hydrolysis reaction remains a great challenge with mineral acids and to an extent with homogeneous catalysts. In addition, even trace amounts of metal impurities in a bioactive product hinder the reaction progress. This has necessitated the development of robust and metal-free catalysts to offer an alternative sustainable route. We report a nitrogen-rich sulfonated carbon as a catalyst derived from an inexpensive precursor for the synthesis of bioactive vicinal diols of spiro-oxindole derivatives. The well-characterized catalyst shows wide generality with different electronic and steric substituents in the substrates under mild reaction conditions. Hot filtration test confirms no leaching of the acid moiety and the catalyst could be reused for four cycles with retention of activities.

An octahedral cobalt(iii) complex based on cheap 1,2-phenylenediamine as a bifunctional metal-templated hydrogen bond donor catalyst for fixation of CO2 with epoxides under ambient conditions

An octahedral cobalt(iii) complex based on cheap 1,2-phenylenediamine operates as an efficient bifunctional hydrogen bond donor catalyst in cycloaddition of epoxides with CO₂ under ambient conditions and solvent- and co-catalyst-free conditions.

Uncommon thioether-modified metal–organic frameworks with unique selective CO2 sorption and efficient catalytic conversion

Two novel 3D MOFs were synthesized successfully. In particular, MOF 1 was found to selectively adsorb CO₂ from the mixture of CH₄/CO₂ and perform as an excellent recyclable catalyst to fix CO₂ into cyclic carbonate.

Rational Design of a ZnII MOF with Multiple Functional Sites for Highly Efficient Fixation of CO2 under Mild Conditions: Combined Experimental and Theoretical Investigation

The development of efficient heterogeneous catalysts suitable for carbon capture and utilization (CCU) under mild conditions is a promising step towards mitigating the growing concentration of CO₂ in the atmosphere. Herein, we report the construction of a hydrogen-bonded 3D framework, {[Zn(hfipbba)(MA)]⋅3 DMF}_n (hfipbba=4,4'-(hexaflouroisopropylene)bis(benzoic acid)) (HbMOF1) utilizing Zn^II center, a partially fluorinated, long-chain dicarboxylate ligand (hfipbba), and an amine-rich melamine (MA) co-ligand. Interestingly, the framework possesses two types of 1D channels decorated with CO₂ -philic (-NH₂ and -CF₃ ) groups that promote the highly selective CO₂ adsorption by the framework, which was supported by computational simulations. Further, the synergistic involvement of both Lewis acidic and basic sites exposed in the confined 1D channels along with high thermal and chemical stability rendered HbMOF1 a good heterogeneous catalyst for the highly efficient fixation of CO₂ in a reaction with terminal/internal epoxides at mild conditions (RT and 1 bar CO₂ ). Moreover, in-depth theoretical studies were carried out using periodic DFT to obtain the relative energies for each stage involved in the catalytic reaction and an insight mechanistic details of the reaction is presented. Overall, this work represents a rare demonstration of rational design of a porous Zn^II MOF incorporating multiple functional sites suitable for highly efficient fixation of CO₂ with terminal/internal epoxides at mild conditions supported by comprehensive theoretical studies.

Coordination-driven assembly of a 3d-4f heterometallic organic framework with 1D Cu4I4 and Eu-based chains: syntheses, structures and various properties

A three-dimensional porous 3d-4f heterometallic organic framework, namely, {[Eu3(Cu4I4)3(INA)9(DMF)4]·3DMF}n (YNU-2), was successfully prepared under solvothermal conditions. There are two different one-dimensional metal chains in the structure, namely, Cu4I4 and EuIII-based chains, resulting in an excellent stability of the prepared sample. A N2 sorption isotherm at 77 K revealed that the activated sample exhibits a Brunauer-Emmett-Teller surface area of 371 m2 g-1, while, YNU-2 can adsorb obviously higher CO2 amounts than CH4 at 273 K and 298 K under 1 atm because of the stronger interaction force between CO2 and the porous skeleton. Furthermore, YNU-2 is highly efficient heterogeneous catalyst for chemical fixation of the CO2 and epoxides into cyclic carbonates with a preferable recyclability. Taking into account its excellent stability, the prepared sample can be used to construct an electrochemical adapter sensor for detecting cocaine with a detection limit of 0.27 pg mL-1 in the wide range of 0.001-0.5 ng mL-1.

Green Pathway in Utilizing CO2 via Cycloaddition Reaction with Epoxide—A Mini Review

Carbon dioxide (CO2) has been anticipated as an ideal carbon building block for organic synthesis due to the noble properties of CO2, which are abundant renewable carbon feedstock, non-toxic nature, and contributing to a more sustainable use of resources. Several green and proficient routes have been established for chemical CO2 fixation. Among the prominent routes, this review epitomizes the reactions involving cycloaddition of epoxides with CO2 in producing cyclic carbonate. Cyclic carbonate has been widely used as a polar aprotic solvent, as an electrolyte in Li-ion batteries, and as precursors for various forms of chemical synthesis such as polycarbonates and polyurethanes. This review provides an overview in terms of the reaction mechanistic pathway and recent advances in the development of several classes of catalysts, including homogeneous organocatalysts (e.g., organic salt, ionic liquid, deep eutectic solvents), organometallic (e.g., mono-, bi-, and tri-metal salen complexes and non-salen complexes) and heterogeneous supported catalysts, and metal organic framework (MOF). Selection of effective catalysts for various epoxide substrates is very important in determining the cycloaddition operating condition. Under their catalytic systems, all classes of these catalysts, with regard to recent developments, can exhibit CO2 cycloaddition of terminal epoxide substrates at ambient temperatures and low CO2 pressure. Although highly desired conversion can be achieved for internal epoxide substrates, higher temperature and pressure are normally required. This includes fatty acid-derived terminal epoxides for oleochemical carbonate production. The production of fully renewable resources by employment of bio-based epoxy with biorefinery concept and potential enhancement of cycloaddition reactions are pointed out as well.

From Discrete Complexes to Metal-Organic Layered Materials: Remarkable Hydrogen Bonding Frameworks

A series of metal-organic coordination complexes based on alkaline-earth metal centers [Mg(II), Ca(II), and Ba(II)] and the ligand 5-aminoisophthalate (aip2-) revealed notable structural diversity, both in the materials' dimensionality and in their hydrogen bonding networks: [Mg(H2O)6]∙[Mg2(Haip)(H2O)10]∙(Haip)∙3(aip)∙10(H2O) (1) and [Mg(aip)(phen)(H2O)2]∙(H2O) (2) were isolated as discrete complexes (0D); [Ca(aip)(H2O)2]∙(H2O) (3), [Ca(aip)(phen)(H2O)2]∙(phen)∙(H2O) (4), and [Ba2(aip)2(phen)2(H2O)7]∙2(phen)∙2(H2O) (5) revealed metal-organic chain (1D) structures, while the [Ba(aip)(H2O)] (6) showed a metal-organic layered (2D) arrangement. Furthermore, most of these metal-organic coordination materials revealed interesting thermal stability properties, being stable at temperatures up to 450 °C.

Selective fluorescence sensing properties of a novel two-fold interpenetrating coordination polymer

One novel 3D interpenetrated Zn(ii) CP acts as multi-functional chemosensors in detection of acetone, Fe³⁺, Cu²⁺, Cr₂O₇²⁻, CrO₄²⁻ and nitrofurantoin (NFT).

Constructing an Interpenetrated NiII-Based Coordination Polymer Based on a Flexible Dicarboxylate Ligand and an N-Donor Ligand: Preparation, Topological Diversity, and Catalytic Properties

A novel coordination polymer (CP) was constructed using 1,3-bis(4-carboxyphenoxy) propane (H2bcp), 1,4-bis(1-imidazol-yl)-2,5-dimethyl benzene (bimb), and NiII ions. [Ni(bcp)(bimb)]·H2O]n (1) shows an interesting 2D+2D → 3D inclined polyrotaxane topology. The structure was characterised by many methods. This work indicates that the flexible and neutral pyridine ligand plays a significant role in constructing CPs. Furthermore, 1 is a highly efficient catalyst for the reaction of CO2 and epoxides.

Syntheses and reactivity of spiro-epoxy/aziridine oxindole cores: developments in the past decade

This review highlights various reactions to afford spiro-epoxy/aziridine oxindoles and their potential synthetic transformations.

Metal–organic frameworks for the energy-related conversion of CO2 into cyclic carbonates

MOFs are promising heterogeneous catalysts for chemical fixation of CO₂ and epoxides into cyclic carbonates.

Metal β-diketonate complexes as highly efficient catalysts for chemical fixation of CO2 into cyclic carbonates under mild conditions

The potential of metal β-diketonate complexes for the catalysis of the chemical fixation of CO₂ into cyclic carbonates at 1 atm CO₂ and near room temperature was demonstrated. Their potential for the capture and simultaneous conversion of CO₂ in a dilute CO₂ stream was also determined. The catalysts were easily synthesized and commercially available. Therefore, this CO₂ transformation was less energy- and material-consuming, which made this reaction closer to true "green" chemistry.

Water-Tolerant DUT-Series Metal-Organic Frameworks: A Theoretical-Experimental Study for the Chemical Fixation of CO2 and Catalytic Transfer Hydrogenation of Ethyl Levulinate to γ-Valerolactone

A series of highly thermally and hydrolytically stable porous solids with intriguing properties of zirconium- and hafnium-based metal-organic frameworks (MOFs) [Dresden University of Technology (DUT) series] was synthesized. The DUT MOFs were found to be effective catalysts for both epoxide-CO₂ cycloaddition reactions and the catalytic transfer hydrogenation (CTH) of ethyl levulinate (EL). In particular, 12-connected DUT-52(Zr) showed higher catalytic activity than eight- and six-connected catalysts in the synthesis of cyclic carbonates as well as in the production of γ-valerolactone (GVL). The secondary building unit connectivity, coexistence of a moderate number of acidic and basic sites, Brunauer-Emmett-Teller surface area, and combined effects of the pores of the MOFs seem to influence the catalytic activity. The reaction mechanism for the DUT-52(Zr)-mediated cycloaddition reaction of CO₂ and the CTH reactions were investigated in detail by using periodic density functional theory calculations. To the best of our knowledge, this is the first detailed computational study for the formation of GVL from EL by using MOF as the catalyst. In addition, grand canonical Monte Carlo simulations predicted the strong interaction of CO₂ molecules with the DUT-52(Zr) framework. Remarkably, the DUT-series catalysts possess extraordinary tolerance toward water. Further, DUT-52(Zr) is recyclable and is an efficient catalyst for cycloaddition and CTH reactions for at least five uses without obvious reductions in the activity or structural integrity.

Fabrication of hierarchically porous MIL-88-NH2(Fe): a highly efficient catalyst for the chemical fixation of CO2 under ambient pressure

A hierarchically micro- and mesoporous MIL-88-NH₂ metal organic framework was prepared through an easy template directed methodology.