Catalytic Reduction of Nitriles by Polymethylhydrosiloxane Using a Phenalenyl-Based Iron(III) Complex

Phenalenyl-ruthenium synergism for effectual catalytic transformations of primary amines to amides

The synthesis of amides holds great promise owing to their impeccable contributions as building blocks for highly valued functional derivatives. Herein, we disclose the design, synthesis and crystal structure of a mixed-ligand ruthenium(II) complex, [Ru(η6-Cym)(O,O-PLY)Cl], (1) where Cym = 1-isopropyl-4-methyl-benzene and O,O-PLY = deprotonated form of 9-hydroxy phenalenone (HO,O-PLY). The complex catalyzes the aerobic oxidation of various primary amines (RCH2NH2) to value-added amides (RCONH2) with excellent selectivity and efficiency under relatively mild conditions with common organic functional group tolerance. Structural, electrochemical, spectroscopic, and computational studies substantiate that the synergism between the redox-active ruthenium and π-Lewis acidic PLY moieties facilitate the catalytic oxidation of amines to amides. Additionally, the isolation and characterization of key intermediates during catalysis confirm two successive dehydrogenation steps leading to nitrile, which subsequently transform to the desired amide through hydration. The present synthetic approach is also extended to substitution-dependent tuning at PLY to tune the electronic nature of 1 and to assess substituent-mediated catalytic performance. The effect of substitution at the PLY moiety (5th position) leads to structural isomers, which were further evaluated for the catalytic transformations of amine to amides under similar reaction conditions.

Au nanoparticle-catalyzed double hydrosilylation of nitriles by diethylsilane

We present the first example of Au-catalyzed reduction of nitriles into primary amines. In contrast to monohydrosilanes which are completely unreactive, diethylsilane (a dihydrosilane) is capable of reducing aryl or alkyl nitriles into primary amines under catalysis by Au nanoparticles supported on TiO2, via a smooth double hydrosilylation pathway. The produced labile N-disilylamines are readily deprotected by HCl in Et2O to form the hydrochloric salts of the corresponding amines in very good to excellent yields. The catalyst is recyclable and reusable at least in 5 consecutive runs.

Highly efficient iron-catalyzed conjugate reduction of α,β-unsaturated ketones with polymethylhydrosiloxane

An iron-catalyzed ligand free conjugate reduction of α,β-unsaturated ketones with PMHS (polymethylhydrosiloxane) was reported to deliver the corresponding carbonyl compounds with up to 93% yield. This operationally simple protocol shows a broad substrate scope using readily available PMHS as a cost-effective and easy-to-handle reductive reagent.

Insight into the MOtBu (M=Na, K)-Mediated Dehydrogenation of Dimethylamine-Borane and Transfer Hydrogenation of Nitriles to Primary Amines

Selective synthesis of primary amines from nitriles is challenging in synthetic chemistry due to the possible en-route generation of various amines and imines. Herein, we report a practical and operationally simple MOtBu-mediated (M=Na, K) transfer hydrogenation of nitriles to the corresponding primary amines with a relatively unexplored sacrificial hydrogen source (dimethylamine borane). The strategy encompasses a broad substrate scope under transition metal-free conditions and does not require any solvent. The mechanistic investigation was performed with the aid of control experiments and spectroscopic studies. The GC analysis of the reaction mixture exhibited the evolution of the H2 gas. Additionally, detailed computational calculations were undertaken to shed light on the possible intermediates and transition states involved during the present protocol.

A closed-shell phenalenyl-based dinuclear iron(III) complex as a robust cathode for a one-compartment H2O2 fuel cell

Closed-shell phenalenyl (PLY) systems are increasingly becoming more attractive as building blocks for developing promising catalysts and electroactive cathode materials, as they have tremendous potential to accept electrons and participate in redox reactions. Herein, we report a PLY-based dinuclear [FeIII2(hmbh-PLY)3] complex, 1, and its utility as a cathode material in a H2O2 fuel cell. Complex 1 was synthesized from a new Schiff base ligand, (E)-9-(2-(2-hydroxy-3-methoxybenzylidene)hydrazineyl)-1H-phenalen-1-one, hmbh-PLYH2, designed using a PLY precursor, Hz-PLY. The newly derived ligand and complex 1 were characterized by various analytical techniques, including single-crystal X-ray diffraction (SCXRD). The cyclic voltammetry (CV) study revealed that complex 1 undergoes five electron reductions under an applied electric potential. When the electroactive complex 1 was employed as a cathode in a membrane-less one-compartment H2O2 fuel cell, with Ni foam as the corresponding anode, the designed fuel cell exhibited an exceptionally high peak power density (PPD) of 2.41 mW cm-2, in comparison with those of all the previously reported Fe-based molecular complexes. DFT studies were performed to gain reasonable insights into the two-electron catalytic reduction (pathway I) of H2O2 by the Fe-center of complex 1 and to explore the geometries, energetics of the electrocatalyst, reactive intermediates and transition states.

Zinc-Catalyzed Chemoselective Reduction of Nitriles to N-Silylimines through Hydrosilylation: Insights into the Reaction Mechanism

The N,N'-chelated conjugated bis-guanidinate (CBG) supported zinc hydride (Zn-1) pre-catalyzed highly challenging chemoselective mono-hydrosilylation of a wide range of nitriles to exclusive N-silylimines and/or N,N'-silyldiimines is reported. Furthermore, the effectiveness of pre-catalyst Zn-1 is compared with another pre-catalyst analogue, i.e., ^DiethylNacNac zinc hydride (Zn-2), to know the ligand effect. We observed that pre-catalyst Zn-1 shows high efficiency and better selectivity than pre-catalyst Zn-2 for reducing nitriles to N-silylimines. Mechanistic studies indicate the insertion of the C≡N bond of nitrile into Zn-H to form the zinc vinylidenamido complexes (Zn-1' and Zn-2'). The active catalysts Zn-1' and Zn-2' are confirmed by NMR, mass spectrometry, and single-crystal X-ray diffraction analyses. A most plausible catalytic cycle has been explored depending on stoichiometric experiments, active catalysts isolation, and in situ studies. Moreover, the synthetic utility of this protocol was demonstrated.

Redox Switching Behavior in Resistive Memory Device Designed Using a Solution-Processable Phenalenyl-Based Co(II) Complex: Experimental and DFT Studies

We herein report a novel square-planar complex [Co^IIL], which was synthesized using the electronically interesting phenalenyl-derived ligand LH₂ = 9,9'-(ethane-1,2-diylbis(azanediyl))bis(1H-phenalen-1-one). The molecular structure of the complex is confirmed with the help of the single-crystal X-ray diffraction technique. [Co^IIL] is a mononuclear complex where the Co(II) ion is present in the square-planar geometry coordinated by the chelating bis-phenalenone ligand. The solid-state packing of [Co^IIL] complex in a crystal structure has been explained with the help of supramolecular studies, which revealed that the π···π stacking present in the [Co^IIL] complex is analogous to the one present in tetrathiafulvalene/tetracyanoquinodimethane charge transfer salt, well-known materials for their unique charge carrier interfaces. The [Co^IIL] complex was employed as the active material to fabricate a resistive switching memory device, indium tin oxide/Co^IIL/Al, and characterized using the write-read-erase-read cycle. The device has interestingly shown a stable and reproducible switching between two different resistance states for more than 2000 s. Observed bistable resistive states of the device have been explained by corroborating the electrochemical characterizations and density functional theory studies, where the role of the Co^II metal center and π-conjugated phenalenyl backbone in the redox-resistive switching mechanism is proposed.

Metal/Non-Metal Catalyzed Activation of Organic Nitriles

Nitrile activation is a prominent topic in recent developments in chemistry, especially in organic, inorganic, biological chemistry, as well as in the natural synthesis of products and in the pharmaceutical industry. The activation of nitriles using both metal and non-metal precursors has attracted several researchers, who are exploring newer ways to synthesize novel compounds. Nitrile activation can be achieved by combining various catalytic double hydroelementation reactions, such as hydrosilylation, hydroboration, and hydrogenation of organonitriles using silanes, pinacolborane, and other sources of hydrogen. These methodologies have garnered considerable attention since they are effective in the reduction of organonitriles, whose end products are extensively applied in synthetic organic chemistry. In this review, we summarize the development of selective hydroborylation, hydrosilylation, dihydroborysilylation, and hydrogenation of organonitriles, as well as their reaction mechanisms and the role of metal complexes in the catalytic cycles. This review article explains various synthetic methodologies applied toward the reduction of organonitriles into corresponding amines.

Phenalenyl Radical: Smallest Polycyclic Odd Alternant Hydrocarbon Present in the Graphene Sheet

Phenalenyl, a zigzag-edged odd alternant hydrocarbon unit can be found in the graphene nanosheet. Hückel molecular orbital calculations indicate the presence of a nonbonding molecular orbital (NBMO), which originates from the linear combination of atomic orbitals (LCAO) arising from 13 carbon atoms of the phenalenyl molecule. Three redox states (cationic, neutral radical, and anionic) of the phenalenyl-based molecules were attributed to the presence of this NBMO. The cationic state can undergo two consecutive reductions to result in neutral radical and anionic states, stepwise, respectively. The phenalenyl-based radicals were found as crucial building blocks and attracted the attention of various research fields such as organic synthesis, material science, computation, and device physics. From 2012 onward, a strategy was devised using the cationic state of phenalenyl-based molecules and in situ generated phenalenyl radicals, which created a new domain of catalysis. The in situ generated phenalenyl radicals were utilized for the single electron transfer (SET) process resulting in redox catalysis. This emerging range of applications rejuvenates the more than six decades-old phenalenyl chemistry. This review captures such developments ranging from fundamental understanding to multidirectional applications of phenalenyl-based radicals.

Designing a Redox Noninnocent Phenalenyl-Based Copper(II) Complex: An Autotandem Catalyst for the Selective Oxidation of Polycyclic Aromatic Hydrocarbons (PAHs)

A square-planar [CuIIL] complex 1, based on the redox-active phenalenyl unit LH2 = 9,9'-(ethane-1,2-diylbis(azanediyl))bis(1H-phenalen-1-one), is prepared and structurally characterized by single-crystal X-ray diffraction analysis. Complex 1 crystallizes at room temperature with the P1 space group. The molecular structure of 1 reveals the presence of intriguing C-H···Cu intermolecular anagostic interactions of the order ∼2.7715 Å. Utilizing the presence of anagostic interactions and the free nonbonding molecular orbitals (NBMOs) of the closed-shell phenalenyl unit in 1, the oxidation reactions of some industrially important polycyclic aromatic hydrocarbons (PAHs) in the presence of the [CuIIL] complex under very mild conditions have been reported. The direct conversion of anthracene-9-carbaldehyde to 9,10-anthraquinone in one step concludes that the catalyst shows dual activity in the chemical transformations. This also includes the first report of a "single-step" catalytic transformation of pyrene-1-carbaldehyde to the synthetically difficult pyren-4-ol, a precursor for the synthesis of several novel fluorescent probes for cell imaging.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.