Lithium-Templated Formation of Polyhedral Oligomeric Silsesquioxanes (POSS)

Cu12-Methylsilsesquioxane Cage Decorated with Cu(dppe)2 Moieties for Mild Oxidative Functionalization of Alkanes

We report a high nuclear (Cu14) complex synthesized via the self-assembly of copper-methylsilsesquioxane induced by the complexation with 1,2-bis(diphenylphosphino)ethane (dppe). The structure includes two cationic CuI(dppe)2 moieties and an anionic silsesquioxane cage of an unprecedented CuII12 structural type. The Cu12 cage fragment exhibits a unique (i) combination of Si4-cyclic/Si2-acyclic silsesquioxane ligands and (ii) encapsulation of two different chloride and carbonate species. This complex acts as a promising precatalyst in the mild oxidation and carboxylation of light alkanes to produce alkyl hydroperoxides, alcohols, ketones, or carboxylic acids. The present study widens the family of copper-methylsilsesquioxane clusters with prospective use in oxidation catalysis.

An ionic Cu9Na4-phenylsilsesquioxane/bis(triphenylphosphine)iminium complex: synthesis, unique structure, and catalytic activity

The synthesis of a high nuclear (Cu9Na4) complex 1via the self-assembly of copper(II) phenylsilsesquioxane induced by complexation with bis(triphenylphosphine)iminium chloride (PPNCl) was successfully achieved. This complex, which includes two bis(triphenylphosphine)iminium PPN+ cations, represents the first example of a metallasilsesquioxane/phosphazene compound. The Cu9Na4-silsesquioxane cage demonstrates a nontrivial combination of two pairs of Si6-cyclic/Si4-acyclic silsesquioxane ligands and a fusion of two Si10Cu4Na2 fragments, combined via the central ninth copper ion. The catalytic efficacy of the copper(II) compound (1) was evaluated through the peroxidative oxidation of toluene using tert-butyl hydroperoxide (t-BuOOH) as the oxidant. The primary oxidation products were benzaldehyde (BAL), benzyl alcohol (BOL), and benzoic acid (BAC), with BAC being the predominant product, especially in acetonitrile (NCMe). The formation of cresols, indicating oxidation at the aromatic ring, was observed only in water and under microwave irradiation (MW) in NCMe. Remarkably, the highest total yield of 40.3% was achieved in water with an acidic additive at 80 °C, highlighting the crucial role of the acid additive in enhancing reaction efficiency and selectivity. This study underscores our copper(II) complex as a highly effective catalyst for toluene oxidation, demonstrating its significant potential for fine-tuning reaction parameters to optimize yields and selectivity. The unprecedented structure of the complex and its promising catalytic performance pave the way for further advancements in the fields of metallasilsesquioxane chemistry and catalysis.

Rational (supra)molecular design and catalytic activity of cage-like Cu4-based phenylsilsesquioxanes

An extended (i.e., 19 distinct species) family of cage-like Cu4-phenylsilsesquioxanes allowed us to accentuate the general regularities behind their structural organization. Influencing factors, namely the (i) size of external alkali metal ions (from Li to Cs) and (ii) nature of bridging linkers (including the smallest possible ones, like a water molecule) on the self-assembly/supramolecular assembly of such Cu4-building blocks have been thoroughly explored. A Cu4K4-based complex has been evaluated as a precatalyst in the oxidation of alkanes (cyclohexane, n-heptane, methylcyclohexane) and alcohols. The experimental evidence that radical species participate in the oxidation of alkanes is provided.

A Family of Hexacopper Phenylsilsesquioxane/Acetate Complexes: Synthesis, Solvent-Controlled Cage Structures, and Catalytic Activity

Convenient self-assembly synthesis of copper(II) complexes via double (phenylsilsesquioxane and acetate) ligation allows to isolate a family of impressive sandwich-like cage compounds. An intriguing feature of these complexes is the difference in the structure of a pair of silsesquioxane ligands despite identical (Cu6) nuclearity and number (four) of acetate fragments. Formation of particular combination of silsesquioxane ligands (cyclic/cyclic vs condensed/condensed vs cyclic/condensed) was found to be dependent on the synthesis/crystallization media. A combination of Si4-cyclic and Si6-condensed silsesquioxane ligands is a brand new feature of cage metallasilsesquioxanes. A representative Cu6-complex (4) (with cyclic silsesquioxanes) exhibited high catalytic activity in the oxidation of alkanes and alcohols with peroxides. Maximum yield of the products of cyclohexane oxidation attained 30 %. The compound 4 was also tested as catalyst in the Baeyer-Villiger oxidation of cyclohexanone by m-chloroperoxybenzoic acid: maximum yields of 88 % and 100 % of ϵ-caprolactone were achieved upon conventional heating at 50 °C for 4 h and MW irradiation at 70 or 80 °C during 30 min, respectively. It was also possible to obtain the lactone (up to 16 % yield) directly from the cyclohexane via a tandem oxidation/Baeyer-Villiger oxidation reaction using the same oxidant.

Silsesquioxane Cages under Solvent Regimen: The Influence of the Solvent on the Hydrolysis and Condensation of Alkoxysilane

This study investigates the formation mechanisms of oligomeric phenyl silanols, focusing on polyhedral oligomeric silsesquioxane (POSS) and double-decker silsesquioxane (DDSQ) derivatives. Combining literature reports and crystal structures of solvated derivatives obtained in our laboratory, we show that the solvent choice significantly influences their structures. POSS-based silanols prefer aprotic solvents like THF, preserving dimerization, while double-deckers form stable architectures in protic solvents like isopropanol. This discrepancy arises from different stabilization mechanisms. Our findings enhance our understanding of hydrolytic condensation involving trimethoxyphenylsilane and suggest aprotic solvents for efficient reactions with POSS-based silanols.

Luminescent Ln3+-based silsesquioxanes with a β-diketonate antenna ligand: toward the design of efficient temperature sensors

We report the synthesis and single-crystal X-ray diffraction, magnetic, and luminescence measurements of a novel family of luminescent cage-like tetranuclear silsesquioxanes (PhSiO1.5)8(LnO1.5)4(O)(C5H8O2)6(EtOH)2(CH3CN)2⋅2CH3CN (where Ln = Tb, 1; Tb/Eu, 2; and Gd, 3), featuring seven-coordinated lanthanide ions arranged in a one-capped trigonal prism geometry. Compounds 1 and 2 exhibit characteristic Tb3+ and Tb3+/Eu3+-related emissions, respectively, sensitized by the chelating antenna acetylacetonate (acac) ligands upon excitation in the UV and visible spectral regions. Compound 3 is used to assess the energies of the triplet states of the acac ligand. For compound 1, theoretical calculations on the intramolecular energy transfer and multiphonon rates indicate a thermal balance between the 5D4 Stark components, while the mixed Tb3+/Eu3+ analog 2, with a Tb:Eu ratio of 3:1, showcases intra-cluster Tb3+-to-Eu3+ energy transfer, calculated theoretically as a function of temperature. By utilizing the intensity ratio between the 5D4→7F5 (Tb3+) and 5D0→7F2 (Eu3+) transitions in the range 11-373 K, we demonstrate the realization of a ratiometric luminescent thermometer with compound 2, operating in the range 11-373 K with a maximum relative sensitivity of 2.0% K-1 at 373 K. These findings highlight the potential of cage-like silsesquioxanes as versatile materials for optical sensing-enabled applications.

Fe(III)-Based Phenylsilsesquioxane/Acetylacetonate Complexes: Synthesis, Cage-like Structure, and High Catalytic Activity

Unprecedented iron-based silsesquioxane/acetylacetonate complexes were synthesized. The intriguing cage-like structure of compounds is alkaline metal-dependent: the Fe2Li2 complex includes condensed Si6-silsesquioxane and four acetylacetonate ligands; the Fe4Na4 complex exhibits two cyclic Si4-silsesquioxane and eight acetylacetonate ligands, while the Fe3K3 complex features two cyclic Si3-silsesquioxane and six acetylacetonate ligands. The latter case is the very first observation of small trimeric silsesquioxane ligands in the composition of cage-like metallasilsesquioxanes. The Fe4Na4-based complex exhibits a record high activity in the oxidation of inert alkanes with peroxides (55% yield of oxygenates in cyclohexane oxidation). It also acts as a catalyst in the cycloaddition of CO2 with epoxides, leading to cyclic carbonates in good yields (58-96%).

A Family of Cagelike Mn-Silsesquioxane/Bathophenanthroline Complexes: Synthesis, Structure, and Catalytic and Antifungal Activity

This study reports a novel family of cage manganesesilsesquioxanes prepared via complexation with bathophenanthroline (4,7-diphenyl-1,10-phenanthroline). The resulting Mn4-, Mn6Li2-, and Mn4Na-compounds exhibit several unprecedented cage metallasilsesquioxane structural features, including intriguing self-assembly of silsesquioxane ligands. Complexes were tested in vitro for fungicidal activity against seven classes of phytopathogenic fungi. The representative Mn4Na-complex acts as a catalyst in the cycloaddition of CO2 to epoxides under solvent-free conditions to form cyclic carbonates in good yields.

Cage-like Cu5Cs4-Phenylsilsesquioxanes: Synthesis, Supramolecular Structures, and Catalytic Activity

A small family of nonanuclear Cu5Cs4-based phenylsilsesquioxanes 1-2 were prepared by a convenient self-assembly approach and characterized by X-ray diffraction studies. The compounds 1 and 2 show some unprecedented structural features such as the presence of a [Ph14Si14O28]14- silsesquioxane ligand and a CuII5CsI4 nuclearity in which the metal cations occupy unusual positions within the cluster. Copper ions are "wrapped" into a silsesquioxane matrix, while cesium ions are located in external positions. This resulted in cesium-involved aggregation of coordination polymer structures. Both compounds 1 and 2 realize specific metallocene (cesium-phenyl) linkage between neighboring cages. Compound 2 is evaluated as a catalyst in the Baeyer-Villiger (B-V) oxidation of cyclohexanone and tandem cyclohexane oxidation/B-V oxidation of cyclohexanone with m-chloroperoxybenzoic acid (mCPBA) as an oxidant, in an aqueous acetonitrile medium, and HNO3 as the promoter. A quantitative yield of ε-caprolactone was achieved under conventional heating at 50 °C for 4 h or MW irradiation for 30 min (for cyclohexanone as substrate); 17 and 19% yields of lactone upon MW irradiation at 80 °C for 30 min and heating at 50 °C for 4 h, respectively (for cyclohexane as a substrate), were achieved. Complex 2 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with peroxides at 60 °C in acetonitrile. The maximum yield of cyclohexane oxidation products was 30%. Complex 2 exhibits high activity in the oxidation of alcohols.

Cagelike Octacopper Methylsilsesquioxanes: Self-Assembly in the Focus of Alkaline Metal Ion Influence-Synthesis, Structure, and Catalytic Activity

A family of unusual octacopper cage methylsilsesquioxanes 1-4 were prepared and characterized. Features of their cagelike (prismatic) structure were established using X-ray diffraction studies. Effects of distortion of prismatic cages 1-4 due to variation of (i) additional alkaline metal ions (K, Rb, or Cs), (ii) combination of solvating ligands, and (iii) nature of encapsulating species were found. Opportunities for the design of supramolecular 1D extended structures were found. These opportunities are based on (i) formate linkers between copper centers (in the case of Cu8K2-based compound 2) or (ii) crown ether-like contacts between cesium ions and siloxane cycles (in the case of Cu8Cs2-based compound 4). Cu8Cs2-complex 4 was evaluated in the catalysis of alkanes and alcohols. Complex 4 exhibits high catalytic activity. The yield of cyclohexane oxidation products is 35%. The presence of nitric acid is necessary as a co-catalyst. The oxidation of alcohols with the participation of complex 4 as a catalyst and tert-butyl hydroperoxide as an oxidizer also proceeds in high yields of up to 98%.

Hybrid Silsesquioxane/Benzoate Cu7-Complexes: Synthesis, Unique Cage Structure, and Catalytic Activity

A series of phenylsilsesquioxane-benzoate heptacopper complexes 1-3 were synthesized and characterized by X-ray crystallography. Two parallel routes of toluene spontaneous oxidation (into benzyl alcohol and benzoate) assisted the formation of the cagelike structure 1. A unique multi-ligation of copper ions (from (i) silsesquioxane, (ii) benzoate, (iii) benzyl alcohol, (iv) pyridine, (v) dimethyl-formamide and (vi) water ligands) was found in 1. Directed self-assembly using benzoic acid as a reactant afforded complexes 2-3 with the same main structural features as for 1, namely heptanuclear core coordinated by (i) two distorted pentameric cyclic silsesquioxane and (ii) four benzoate ligands, but featuring other solvate surroundings. Complex 3 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with hydrogen peroxide and tert-butyl hydroperoxide, respectively, at 50 °C in acetonitrile. The maximum yield of cyclohexane oxidation products as high as 32% was attained. The oxidation reaction results in a mixture of cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone. Upon the addition of triphenylphosphine, the cyclohexyl hydroperoxide is completely converted to cyclohexanol. The specific regio- and chemoselectivity in the oxidation of n-heptane and methylcyclohexane, respectively, indicate the involvement of of hydroxyl radicals. Complex 3 exhibits a high activity in the oxidation of alcohols.

Eu3+ and Tb3+ @ PSQ: Dual Luminescent Polyhedral Oligomeric Polysilsesquioxanes

The synthesis and characterization of novel luminescent amorphous POSS-based polysilsesquioxanes (PSQs) with Tb³⁺ and Eu³⁺ ions directly integrated in the polysilsesquioxane matrix is presented. Two different Tb³⁺/Eu³⁺ molar ratios were applied, with the aim of disclosing the relationships between the nature and loading of the ions and the luminescence properties. Particular attention was given to the investigation of site geometry and hydration state of the metal centers in the inorganic framework, and of the effect of the Tb³⁺ → Eu³⁺ energy transfer on the overall optical properties of the co-doped materials. The obtained materials were characterized by high photostability and colors of the emitted light ranging from orange to deep red, as a function of both the Tb³⁺/Eu³⁺ molar ratio and the chosen excitation wavelength. A good energy transfer was observed, with higher efficiency displayed when donor/sensitizer concentration was lower than the acceptor/activator concentration. The easiness of preparation and the possibility to finely tune the photoluminescence properties make these materials valid candidates for several applications, including bioimaging, sensors, ratiometric luminescence-based thermometers, and optical components in inorganic or hybrid light-emitting devices.

A Novel Family of Cage-like (CuLi, CuNa, CuK)-phenylsilsesquioxane Complexes with 8-hydroxyquinoline Ligands: Synthesis, Structure, and Catalytic Activity

The first examples of metallasilsesquioxane complexes, including ligands of the 8-hydroxyquinoline family 1–9, were synthesized, and their structures were established by single crystal X-ray diffraction using synchrotron radiation. Compounds 1–9 tend to form a type of sandwich-like cage of Cu₄M₂ nuclearity (M = Li, Na, K). Each complex includes two cisoid pentameric silsesquioxane ligands and two 8-hydroxyquinoline ligands. The latter coordinates the copper ions and corresponding alkaline metal ions (via the deprotonated oxygen site). A characteristic (size) of the alkaline metal ion and a variation of characteristics of nitrogen ligands (8-hydroxyquinoline vs. 5-chloro-8-hydroxyquinoline vs. 5,7-dibromo-8-hydroxyquinoline vs. 5,7-diiodo-8-hydroxyquinoline) are highly influential for the formation of the supramolecular structure of the complexes 3a, 5, and 7–9. The Cu₆Na₂-based compound 2 exhibits high catalytic activity towards the oxidation of (i) hydrocarbons by H₂O₂ activated with HNO₃, and (ii) alcohols by tert-butyl hydroperoxide. Studies of kinetics and their selectivity has led us to conclude that it is the hydroxyl radicals that play a crucial role in this process.

Acetone Factor in the Design of Cu4-, Cu6-, and Cu9-Based Cage Coppersilsesquioxanes: Synthesis, Structural Features, and Catalytic Functionalization of Alkanes

The present study describes a new feature in the self-assembly of cagelike copperphenylsilsesquioxanes: the strong influence of acetone solvates on cage structure formation. By this simple approach, a series of novel tetra-, hexa-, or nonacoppersilsesquioxanes were isolated and characterized. In addition, several new complexes of Cu₄ or Cu₆ nuclearity bearing additional nitrogen-based ligands (ethylenediamine, 2,2'-bipyridine, phenanthroline, bathophenanthroline, or neocuproine) were produced. Single-crystal X-ray diffraction studies established molecular architectures of all of the synthesized products. Several coppersilsesquioxanes represent a novel feature of cagelike metallasilsesquioxane (CLMS) in terms of molecular topology. A Cu₄-silsesquioxane complex with ethylenediamine (En) ligands was isolated via the unprecedented self-assembly of a partly condensed framework of silsesquioxane ligands, followed by the formation of a sandwich-like cage. Two prismatic Cu₆ complexes represent the different conformers─regular and elliptical hexagonal prisms, "cylinders", determined by the different orientations of the coordinated acetone ligands ("shape-switch effect"). A heterometallic Cu₄Na₄-sandwich-like derivative represents the first example of a metallasilsesquioxane complex with diacetone alcohol ligands formed in situ due to acetone condensation reaction. As a selected example, the compound [(Ph₆Si₆O₁₁)₂Cu₄En₂]·(acetone)₂ was explored in homogeneous oxidation catalysis. It catalyzes the oxidation of alkanes to alkyl hydroperoxides with hydrogen peroxide and the oxidation of alcohols to ketones with tert-butyl hydroperoxide. Radical species take part in the oxidation of alkanes. Besides, [(Ph₆Si₆O₁₁)₂Cu₄En₂]·(acetone)₂ catalyzes the mild oxidative functionalization of gaseous alkanes (ethane, propane, n-butane, and i-butane). Two different model reactions were investigated: (1) the oxidation of gaseous alkanes with hydrogen peroxide to give a mixture of oxygenates (alcohols, ketones, or aldehydes) and (2) the carboxylation of C_n gaseous alkanes with carbon monoxide, water, and potassium peroxodisulfate to give C_n+1 carboxylic acids (main products), along with the corresponding C_n oxygenates. For these reactions, the effects of acid promoter, reaction time, and substrate scope were explored. As expected for free-radical-type reactions, the alkane reactivity follows the trend C₂H₆ < C₃H₈ < n-C₄H₁₀ < i-C₄H₁₀. The highest total product yields were observed in the carboxylation of i-butane (up to 61% based on i-C₄H₁₀). The product yields and catalyst turnover numbers (TONs) are remarkable, given an inertness of gaseous alkanes and very mild reaction conditions applied (low pressures, 50-60 °C temperatures).

Synthesis of Novel Luminescent Double-Decker Silsesquioxanes Based on Partially Condensed TetraSilanolPhenyl POSS and Tb3+/Eu3+ Lanthanide Ions

In this study, novel lanthanide-containing double-decker polyhedral oligomeric silsesquioxanes (POSS) were prepared by combining the partially condensed TetraSilanolPhenyl POSS with terbium (Tb3+) and europium (Eu3+) ions. This open-cage POSS possesses four diametrically opposite silanol groups that are able to coordinate, under mild conditions, different luminescent ions through a simple corner-capping method. The two metal-containing POSS functionalized with Tb3+ and with an equimolar combination of Tb3+ and Eu3+ show a completely condensed structure with different luminescent properties. Their emission features depend on the chemical nature of the metal ions incorporated in the framework. An improved stokes shift was detected in the bimetallic compound containing both the Tb3+ and Eu3+ ions, promoted by the occurrence of a Tb3+→Eu3+ energy transfer mechanism. These characteristics identify this metal-functionalized silica platform as a potential candidate for the development of novel luminescent devices.

Recent Progresses on Designable Hybrids with Stimuli-Responsive Optical Properties Originating from Molecular Assembly Concerning Polyhedral Oligomeric Silsesquioxane

In this review, we describe recent progresses on the stimuli-responsive hybrid materials based on polyhedral oligomeric silsesquioxane (POSS) and their applications as a chemical sensor. In particular, we explain the unique functions originating from molecular assembly concerning POSS-containing soft materials mainly from our studies. POSS has an inorganic cubic core composed of silicon-oxygen (Si-O) bonds and organic substituents at each vertex. Owing to intrinsic properties of POSS, such as high thermal stability, rigidity, and low chemical reactivity, various robust hybrid materials have been developed. From the numerous numbers of POSS hybrids, we herein focus on the environment-sensitive optical materials in which molecular assembly of POSS itself and functional units connected to POSS should be a key factor for expressing material properties. We also explain the mechanisms of chemical sensors originating from these stimuli-responsive optical properties. Stimuli-responsive excimer emission and pollutant detectors, nanoplastic sensors with the water-dispersive POSS networks, trans fatty acid sensors, turn-on luminescent sensors for aerobic condition and fluoride anion sensors are described. We also mention the mechanochromic polyurethane hybrids and the thermally-durable mechanochromic luminescent materials. The roles of the unique optical properties from soft materials composed of rigid POSS, which doesn't have significant light-absorption and emission properties in the visible region, are surveyed.

Cage-like manganesesilsesquioxanes: features of their synthesis, unique structure, and catalytic activity in oxidative amidations

A family of Mn-based cage-like silsesquioxanes (and complexes with 1,10-phenanthroline) exhibits unique types of molecular architectures and catalytic activity in oxidative amidation reactions.

Alkenyl-Functionalized Open-Cage Silsesquioxanes (RSiMe2O)3R'7Si7O9: A Novel Class of Building Nanoblocks

Trifunctional incompletely condensed polyhedral oligomeric silsesquioxanes (RSiMe₂O)₃R′₇Si₇O₉ (IC-POSSs) are considered as intriguing building nanoblocks dedicated to constructing highly advanced organic–inorganic molecules and polymers. Up to now, they have been mainly obtained via hydrosilylation of olefins, while the hydrosilylation of the C≡C bonds has not been studied at all, despite the enormous potential of this approach resulting from the possibility of introducing 3, 6, or even more functional groups into the IC-POSS structure. Therefore, in this work, we present a highly selective and efficient synthesis of the first example of tripodal alkenyl-functionalized IC-POSSs, obtained via platinum-catalyzed hydrosilylation of the terminal and internal alkynes, as well as symmetrically and nonsymmetrically 1,4-disubstituted buta-1,3-diynes with silsesquioxanes (HSiMe₂O)₃R′₇Si₇O₉ (R′ = i-C₄H₉ (1a), (H₃C)₃CH₂C(H₃C)HCH₂C (1b)). The resulting products are synthetic intermediates that contain C=C bonds and functional groups (e.g., OSiMe₃, SiR₃, Br, F, B(O(C(CH₃)₂)₂ (Bpin)), thienyl), which make them suitable for application in the synthesis of novel, complex, hybrid materials with unique properties.

The first example of the synthesis of alkenyl-functionalized open-cage silsesquioxanes (IC-POSS) via platinum-catalyzed hydrosilylation of C−C triple bonds in alkynes and buta-1,3-diynes is presented. The optimized synthetic procedure allowed for the selective and efficient synthesis of 20 new functional molecules capable of further modification by hydrosilylation, hydroboration, or other chemical processes.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity

This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu₆ cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu₈-based (6 and 7) and Cu₆-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu₆ cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C₅-C₈ cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

Symmetry driven: the synthesis of co-substituent octasilsesquioxanes

Cubic octasilsesquioxanes with mixed substituents were directly synthesized through a sol–gel process using the mixture of i-butyl(triethoxysilane) and other alkoxysilanes.