Superior Ethanol Oxidation Electrocatalysis Enabled by Ternary Pd-Rh-Te Nanotubes

Facile Synthesis of High-Entropy Alloy Nanowires for Electrocatalytic Alcohol Oxidation

Considering the structural and compositional advantages of high-entropy alloy (HEA) as high-efficient electrocatalysts, we here present a facile method to prepare high-entropy alloy nanowires with seven elements in an aqueous solution. The as-synthesized PdPtCuAgAuPbCo nanowires possess dispersed one-dimensional morphology and exhibit enhanced electrocatalytic performance with the mass activity of 9.9 A mgPd+Pt -1 toward ethanol electrooxidation. The HEA nanowires also perform superior stability, resistance to CO poisoning, and good electrocatalytic activities toward other alcohols (e. g., ethylene glycol and methanol) oxidation. The synthesis strategy is easy to operate with low cost and has wide application prospects for preparing desired electrocatalysts for fuel cells.

Assembly of Alloyed PdM (Ag, Cu, and Sn) Nanosheets and Their Electrocatalytic Oxidation of Ethanol and Methanol

Direct alcohol fuel cells are popular due to their high energy density, abundant sources, and ease of transportation and storage. Palladium-based nanosheet self-assembled materials have emerged as an effective catalyst for alcohol oxidation reactions. In this work, nanosheets were synthesized with the same feeding ratio assembly of alloyed PdM (M = Ag, Cu, and Sn). The introduction of the second element was able to enhance the catalytic response of the catalysts to alcohol electrooxidation. Among them, the PdCu alloy exhibited the best performance in terms of catalytic activity, toxicity resistance, and stability to ethanol oxidation reaction (EOR) and methanol oxidation reaction (MOR). The catalytic current densities for EOR can reach 2226, 2518, and 1598 mA mg-1 for PdAg, PdCu, and PdSn nanosheet assemblies, respectively. These are mainly attributed to better electronic effects, altered atomic distances within the cell for the d-band centers of Pd, and a larger electrochemical active surface area (ECSA). The optimized d-band center is beneficial to promote the catalytic performance of EOR and MOR. Experimental data also demonstrated that higher electrocatalytic temperature, higher pH, and higher alcohol concentration can accelerate the rate of alcohol electrooxidation. These results have the potential to be extended to Pd-M (M = other metals) nanosheets and help for a wider range of catalytic applications.

Introducing Te for boosting electrocatalytic reactions

The deployment of robust catalysts for electrochemical reactions is a critical topic for energy conversion techniques. Te-based nanomaterials have attracted increasing attention for their application in electrochemical reactions due to their positive influence on the electrocatalytic performance induced by their distinctive electronic and physicochemical properties. Herein, we have summarized the recent progress on Te-based nanocatalysts for electrocatalytic reactions by primarily focusing on the positive influence of Te on electrocatalysts. Firstly, Te-based nanomaterials can serve as an ideal template for the construction of well-defined nanostructures. Secondly, Te doping can significantly modify the electronic structure of the host catalyst, thereby, leading to the optimization of binding strength with intermediates. Furthermore, the Te etching strategy can also create a high density of surface defects, thereby leading to substantial improvement in the electrocatalytic performance. Additionally, many representative Te-based nanocatalysts for electrocatalytic reactions are also summarized and systematically discussed. Finally, a conclusive and perspective discussion is also provided to provide guidance for the future development of more efficient electrocatalysts.

Boosting Hydrogen Production by Selective Anodic Electrooxidation of Ethanol over Trimetallic PdSbBi Nanoparticles: Composition Matters

The conventional hydrogen evolution from water electrolysis is severely impeded by the sluggish kinetics of oxygen evolution reaction (OER). In this work, an integrated electrolysis system of replacing the anodic OER with a thermodynamically favorable ethanol oxidation reaction (EOR) has been developed by using PdSbBi/C as an electrocatalyst. To maximize the EOR performance, the composition of PdSbBi nanoparticles is tuned by varying the ratio of Sb and Bi precursors. Ternary PdSbBi-based electrocatalysts exhibit enhanced activity and stability toward EOR compared to commercial Pd/C and binary catalysts. In particular, the Pd₇₆Sb₁₇Bi₇/C catalyst delivers a very high specific activity up to 52.4 mA cm^-2 and mass activity of 2.66 A mg^-1_Pd. Besides, this EOR process is demonstrated to have high selectivity with acetic acid as the oxidation product in the electrolyte. When coupled with a cathodic platinum mash, the two-electrode electrolyzer cell requires a voltage input of merely 0.61 V to afford a current density of 10 mA cm^-2. Density functional theory calculations reveal that the presence of Sb and Bi can promote the adsorption of hydroxide ions and facilitate the removal of reaction intermediates in the EOR pathway. This work provides a novel catalyst for the energy-efficient coproduction of acetic acid and hydrogen fuel.

Branch-Regulated Palladium-Antimony Nanoparticles Boost Ethanol Electro-oxidation to Acetate

Tuning the composition and morphology of bimetallic nanoparticles (NPs) offers an effective strategy to improve their electrocatalytic performance. In this work, we present a facile wet-chemistry procedure to engineer PdSb NPs with controlled morphology. Spherical or branched NPs are produced by tuning the heterogeneous nucleation of Sb on Pd seeds. Compared with pure Pd NPs, the incorporation of Sb not only decreases the amount of Pd used but also results in a significant increase of activity and stability for the electrocatalytic ethanol oxidation reaction (EOR). Best performances are obtained with highly branched PdSb NPs, which deliver a specific activity of 109 mA cm^-2 and a mass activity of up to 2.42 A mg_Pd^-1, well above that of a commercial Pd/C catalyst and branched Pd NPs. Moreover, PdSb displays significant stability enhancement of over 10 h for the EOR measurements. Density functional theory calculations reveal that the improved performance of PdSb NPs is related to the role played by Sb in reducing the energy barrier of the EOR rate-limiting step. Interestingly, as a side and value-added product of the EOR, acetate is obtained with 100% selectivity on PdSb catalysts.

Pt/Mn3O4 cubes with high anti-poisoning ability for C1 and C2 alcohol fuel oxidation

Pt particles anchored onto Mn₃O₄ cubes were found to have high anti-CO poisoning abilities for C1- and C2-alcohol fuel oxidations in acid electrolyte, due to an electronic effect that enriched the surfaces of the Pt particles with electrons and due to the oxophilicity of Mn₃O₄ in the system.

Electrospun one-dimensional electrocatalysts for boosting electrocatalysis

Electrocatalytic reaction plays a crucial role in determining the energy conversion efficiency in advanced technology. However, it is limited by the sluggish reaction kinetics and high energy barrier. These shortcomings...

Synergistic catalytic hydrolysis of ammonia borane to release hydrogen over AgCo@CN

Synergistic catalytic AB hydrolysis to generate hydrogen was achieved over AgCo@CN synthesized by auto-reduction between Co@CN and a Ag precursor.

Well-defined polyindole–Au NPs nanobrush as a platform for electrochemical oxidation of ethanol

Over the recent decades, conducting polymers have received great interest in many fields including microelectronics, energy conversion devices, and biosensing due to their unique properties like electrical conductivity, stability, and simple synthesis. Modification of conducting polymers with noble metals e.g. gold enhances their properties and opens new opportunities to also apply them in other fields like electrocatalysis. Here, we focus on the synthesis of hybrid material based on polyindole (PIN) nanobrush modified with gold nanoparticles and its application towards electrooxidation of ethanol. The paper presents systematic studies from synthesis to electrochemical sensing applications. For the characterization of PIN–Au composites, scanning electron microscopy and X-ray diffraction analyses were used. The electrocatalytic performance of the proposed hybrid material towards alcohol oxidation was studied in alkaline media by cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy techniques. The results show that PIN–Au hybrid can be employed as an effective and sensitive platform for the detection of alcohols, which makes it a promising material in electrocatalysis or sensors. Moreover, the proposed composite exhibits electrocatalytic activity towards ethanol oxidation, which combined with its good long-term stability opens the opportunity for its application in fuel cells.

Hierarchical defective palladium-silver alloy nanosheets for ethanol electrooxidation

Tuning the chemical composition and surface structure of electrodes is demonstrated as a feasible and effective strategy to tailor advanced catalysts for energy electrocatalysis. In this work, hierarchical palladium-silver alloy nanosheets (PdAg NS) with the thickness ~7 atoms and rich atomic defects are successfully prepared, using the carbon monoxide (CO) confinement approach. The optimized Pd₇Ag₃ NS/C exhibits 8.8 times higher catalytic peak current density and much better stability toward ethanol electrooxidation than Pd NS/C catalyst. The catalytic enhancement mechanism could be attributed to the synergetic effects among optimized electronic structure of Pd, novel architecture, and rich atomic defects.

Interface Nanoengineering of PdNi-S/C Nanowires by Sulfite-Induced for Enhancing Electrocatalytic Hydrogen Evolution

The interfacial structural design of materials in nanoscale is a promising approach to regulate the physicochemical properties of materials and further optimize material properties for a variety of potential applications. Herein, PdNi-S/C nanowires with inductive sulfite has been successfully crafted through hydrothermal synthesis and applied as a superior hydrogen evolution reaction (HER) catalyst. Based on the autocatalytic mechanism, PdNi alloy nanoparticles were synthesized by controlling reduction kinetics with the presence of formic acid. Meanwhile, the sulfite is selected as an effective inductive agent to form PdNi-S/C nanowires with amorphous interfaces. The morphology, composition, and electronic structure of the synthesized PdNi-S/C were studied in detail. The PdNi-S/C manifests excellent HER performance in alkaline solution with an overpotentials of 67 mV at current density of 10 mA cm^-2, a Tafel slope of 69.4 mV dec^-1, and significantly long-term durability. The improvement of HER performance of the PdNi-S/C is attributed to the one-dimensional nanowire structure, abundant sulfur vacancies and defects, and the synergistic effect between PdNi-S nanowires with the graphite carbon. Furthermore, this present work offers a novel method for structure adjustment of materials to effectively control their property and catalytic performance.

Porous Pt–Rh–Te nanotubes: an alleviated poisoning effect for ethanol electrooxidation

A series of uniform and well-defined ternary 1D Pt–Rh–Te nanotubes with different compositions have been developed.