Copper-Containing Polyoxometalate-Based Metal–Organic Frameworks as Highly Efficient Heterogeneous Catalysts toward Selective Oxidation of Alkylbenzenes

Polyoxovanadate-Based Metal-Organic Frameworks with Dual Active Sites for the Synthesis of p-Benzoquinones

p-Benzoquinones are important organic intermediates in the synthesis of biopharmaceuticals and fine chemicals. In this study, two crystalline 3D polyoxovanadate-based metal-organic frameworks, H[Cu(tpi)2]{Cu2V7O21}·H2O (1, tpi = C18N5H13) and [Co(Htpi)2]{V4O12} (2, Htpi = C18N5H14), were synthesized, which as heterogeneous catalysts showed excellent catalytic activities for the synthesis of p-benzoquinones. Both compounds were characterized by IR, UV-vis diffuse reflectance spectroscopy, TG, XPS, X-ray diffraction, etc. In 1, {Cu2V7} clusters are connected together by copper cations and 1D Cu-organic coordination chains to yield a 3D polyoxometalate-based metal-organic framework (POMOF); in 2, adjacent 2D bimetallic oxide layers, constructed from 1D polyoxovanadate chains and cobalt ions, are further connected by 1D Co-organic coordination chains to form a 3D POMOF. Noteworthily, in the synthesis of trimethyl-p-benzoquinone, the key intermediate of vitamin E, using 2,3,6-trimethylphenol as the model substrate, the turnover frequency values for compounds 1 and 2 can, respectively, reach 607 and 380 h-1 in 8 min. Furthermore, both compounds demonstrated excellent recyclability and structural stability, characterized by PXRD and IR. The catalytic mechanism reveals that both the homolytic radical mechanism and heterolytic oxygen atom transfer mechanism are involved.

Periodate-Mediated Aerobic Oxidation of Sulfides over a Bifunctional Porphyrin-polyoxometalate Catalyst: Photosensitized Singlet Oxygen Oxidation of Iodate to Periodate

Regeneration of terminal oxidants by molecular oxygen in metal-catalyzed oxidations of organic substrates has the advantage of avoiding the use of stoichiometric amounts of hazardous and/or expensive reagents to meet (some of) the green chemistry requirements. In the present study, photosensitized singlet oxygen oxidation of iodate to periodate has been used to regenerate the oxidant in polyoxometalate (POM)-catalyzed oxidation of sulfides to sulfoxides with periodate in water. To the best of our knowledge, it is the first report on singlet oxygen oxidation of iodate to periodate. In order to determine the contribution of photooxidation and oxidation pathways in the formation of sulfoxide, the oxidation of diphenyl sulfide with a very low reactivity toward aerobic photooxidation was studied; a sevenfold increase in the conversion of the sulfide to the diphenyl sulfoxide was observed for the reaction conducted in the presence of H2TMPyP-PW12O40/IO3-/O2/hν compared to that in the presence of H2TMPyP-PW12O40/O2/hν. Also, under the same conditions, a ca. 1.5-fold increase was observed in the case of methyl phenyl sulfide, which shows high reactivity toward both the oxidation and photooxidation reactions. A porphyrin-POM nanocomposite formed by the electrostatic immobilization of meso-tetra(N-methylpyridinium-4-yl)porphyrin (H2TMPyP) on PW12O40 was employed for the one-pot oxidation and photooxidation reactions. Field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), diffuse-reflectance UV-vis spectroscopy, thermal gravimetric analysis, and Fourier transform infrared were used to characterize the formation of the hybrid compound. An average particle size of 42 nm was estimated for H2TMPyP-PW12O40 from XRD peak broadening using the Scherrer equation. Also, FESEM images showed the formation of nearly spherical nanoparticles with a size of ca. 200 nm. The redshift of the Soret band of H2TMPyP upon immobilization on POM was attributed to strong N-H···O hydrogen-bond interactions between POM and porphyrin.

Heteroatom-Modulated Assembly of Hexalanthanoid-Containing Polyoxometalate-Based Coordination Networks

Two series of lanthanoid (Ln)-containing polyoxometalates (POMs) {[Ln₆(ampH)₄(H₂O)_24-n(ampH₂)_n(PW₁₁O₃₉)₂]·21H₂O (Ln = Tb, n = 0 (1), Ln = Er, n = 1 (2)) and K₂[Ln₆(ampH)₄(H₂O)₂₂(SiW₁₁O₃₉)₂]·23H₂O (Ln = Tb (3), Er (4)) (ampH₂ = (aminomethyl) phosphonic acid)} have been synthesized with tri-lacunary Keggin-type POMs containing different types of heteroatoms. Compounds 1 and 2 display neutral organic-inorganic hybrid POM molecules containing {Ln₆(ampH)₄} ({Ln₆}) cores sandwiched by two {PW₁₁O₃₉} units. By changing the heteroatoms from P^V to Si^IV, the extended 2D networks of 3 and 4 were successfully isolated where the adjacent {Ln₆} clusters were connected by {SiW₁₁O₃₉} moieties. Luminescence performances and magnetic properties of 1-4 have been systematically surveyed. The solid-state fluorescence spectra of 1-4 display characteristic emissions of Ln components resulting from the 4f-4f transitions, and energy transfer from the POM segments to Ln³⁺ centers in 1 and 3 has been observed based on the lifetime decay behaviors. Furthermore, all compounds can be utilized as electrocatalysts toward reduction of nitrite with high stability.

Barrel-Shaped-Polyoxometalates Exhibiting Electrocatalytic Water Reduction at Neutral pH: A Synergy Effect

Two copper-based barrel-shaped polyoxometalates (POMs), namely, [{H₃O}₄{Na₆(H₂O)₂₂}][{Cu^I (H₂O)₃}₂{Cu^II (H₂O)}₃{B-α-Bi^IIIW^VI₉O₃₃}₂]·7H₂O (NaCu-POM) and Li₄[{NH₄}₂{H₃O}₃{Li(H₂O)₅}][{Cu^II(SH)}{(Cu^IICu^I_1.5)(B-α-Bi^IIIW^VI₉O₃₃)}₂]·9H₂O (LiCu-POM) have been synthesized and structurally characterized. The single-crystal X-ray diffraction analyses of NaCu-POM and LiCu-POM reveal the presence of penta- and hexa-nuclear copper wheels per formula units, respectively; these copper wheels are sandwiched between two lacunary Keggin anions {B-α-Bi^IIIW^VI₉O₃₃}^9- (BiW₉) to form the barrel-shaped title POM compounds. In both the compounds NaCu-POM and LiCu-POM, the mixed-valent copper centers are present in their respective penta- and hexa-nuclear copper wheels, established by X-ray photoelectron spectroscopy (XPS) as well as by bond valence sum (BVS) calculations. Compound LiCu-POM additionally shows the presence of a sulfhydryl ligand (SH^-), coordinated to one of the copper centers of its {Cu₆}-wheel, that is expected to be generated from the in situ reduction of sulfate anion present in the concerned reaction mixture (lithium-ion in ammonia solution may be the reducing agent). Interestingly, the title compounds, NaCu-POM and LiCu-POM exhibit an efficient electrocatalytic hydrogen evolution reaction (HER) by reducing water at neutral pH. Detailed electrochemical studies including controlled experiments indicate that the active sites for this electrocatalysis are the W(VI) centers of the title compounds, not the copper centers. However, a relevant tri-lacunary Keggin cluster anion {P^VW^VI₉O₃₃}^7- (devoid of copper ion) does not show comparable HER as shown by the title compounds. The intra-cluster cooperative interactions of the mixed-valent copper centers (Cu^II/Cu^I) with the tungsten centers (W⁶⁺) make the overall system electrocatalytically active toward water reduction to molecular hydrogen at neutral pH. High Faradaic efficiencies (89 and 92%) and turnover frequencies (1.598 s^-1 and 1.117 s^-1) make the title compounds NaCu-POM and LiCu-POM efficient catalysts toward electrochemical water reduction to molecular hydrogen.

Two Copper-Containing Polyoxometalate-Based Metal-Organic Complexes as Heterogeneous Catalysts for the C-H Bond Oxidation of Benzylic Compounds and Olefin Epoxidation

Using a one-pot assembly method, two novel copper-containing Keggin-type polyoxometalates (POMs)-based metal-organic complexes, that is, [Cu^II₂(pbba)₂NO₃^-(H₂O)₂(PW₁₂O₄₀)]·3H₂O [PW₁₂-Cu-pbba, H₂pbba = 1,1'-(1,4-phenylene-bis(methylene))-bis(pyridine-3-carboxylic acid)] and [Cu^II₂(pbba)₂(H₂O)₂(GeW₁₂O₄₀)]·3H₂O (GeW₁₂-Cu-pbba), were successfully synthesized. These two complexes are isostructural, differing only in their POM components. They are applicable as heterogeneous catalysts for the C-H bond oxidation of benzylic compounds and olefin epoxidation under mild conditions, with oxygen as the oxidant and isobutyraldehyde as the coreductant. The catalytic activity of PW₁₂-Cu-pbba was superior to that of GeW₁₂-Cu-pbba. Under the optimal conditions, PW₁₂-Cu-pbba catalyzed the oxidation of indane into 1-indanone with an 81% yield and >99% selectivity within 48 h. As heterogeneous catalysts, both complexes demonstrated excellent recoverability and high stability and could be stably reused five times without significant activity loss.

Polyoxometalate-Incorporated Metal-Organic Network as a Heterogeneous Catalyst for Selective Oxidation of Aryl Alkenes

Selective oxidation of aryl alkenes is important for chemical synthesis reactions, in which the key lies in the rational design of efficient catalysts. Herein, four polyoxometalate (POM)-incorporated metal-organic networks, with the formulas of [Co(ttb)(H₂O)₃]₂[SiMo₁₂O₄₀]·2H₂O (1), [Co(ttb)(H₂O)₂]₂[SiW₁₂O₄₀]·8H₂O (2), [Zn(Httb)(H₂ttb)][BW₁₂O₄₀]·9H₂O (3) and {[Zn(H₂O)₃(ttb)]₄[Zn₃(H₂O)₆]}[H₃SiW_10.5Zn_1.5O₄₀]₂·24H₂O (4) (ttb = 1,3,5-tri(1,2,4-triazol-1-ylmethyl)-2,4,6-trimethylbenzene), were hydrothermally synthesized and structurally characterized. Structural analysis showed that compound 1 consists of a POM-encapsulated three-dimensional (3-D) supramolecular framework; compound 2 is composed of a POM-supported 3-D coordination network; and compounds 3-4 show POM-incorporated 3-D supramolecular networks. Using selective catalytic oxidation of styrene as the model reaction, compounds 1-4 as heterogeneous catalysts display excellent performance with the double advantages of high styrene conversion and benzaldehyde selectivity owing to the synergistic effect among POM anions and transition metal (TM) centers. Among them, compound 1 exhibits the highest performance with ca. 96% styrene conversion and ca. 99% benzaldehyde selectivity in 3 h. In addition, compound 1 also displays excellent substrate compatibility, good reusability, and structural stability. Thus, a plausible reaction pathway for the selective oxidation of styrene is proposed. This study on the structure-function relationship paves a way for the rational design of POM-based heterogeneous catalysts for important catalysis applications.

Controlled Assembly of Ru-Containing Polyoxometalates for Photocatalytic Activity of the Primary Amine Coupling Reaction

Three Ru-induced structural interconversion polyoxometalates (POMs), Na₁₃H₅[Ru₄(H₂O)₂(Cl)₂(WO₂)₄(AsW₉O₃₃)₄]·43H₂O (1), K₅Na₉H₈[Ru₂(WO₂)₄(AsW₉O₃₃)₄]·50H₂O (2), and KNa₁₃H₁₄[(WO₂)₄(AsW₉O₃₃)₄]·34H₂O (3), were successfully synthesized and thoroughly characterized. Interconversion of structures was accomplished by changing the number of active sites for compounds 1-3. All three compounds contain one {As₄W₄₀O₁₄₀} unit, showing similar structural characteristics except for the active center number (Ru). Interestingly, compound 1 [turnover number (TON)= 486; turnover frequency (TOF)= 20 h^-1] showed highly efficient photocatalysis in achieving oxidative coupling of primary amines. Compound 2 (TON = 406, TOF = 17 h^-1) was also found to promote the oxidative coupling with relatively poor efficiency; however, compound 3 (TON = 178; TOF = 7.4 h^-1) had no obvious contribution to the coupling reaction system, and a chain of evidence indicates that the catalytic performances are strongly dependent on element contents of active sites. Furthermore, the Ru-containing POM-based photocatalysts are conveniently recyclable and reusable during the photocatalytic processes. This study demonstrates the possibility of tuning the catalytic efficiency and stability of POM-based photocatalysts by well designing and controlling their structures. The possible reaction mechanism for the photocatalysis synthesis of imine product is also proposed based on experimental studies.

Hydrocarbon Oxidation Depth: H2O2/Cu2Cl4·2DMG/CH3CN System

The oxidation of hydrocarbons of different structures under the same conditions is an important stage in the study of the chemical properties of both the hydrocarbons themselves and the oxidation catalysts. In a 50% H2O2/Cu2Cl4·2DMG/CH3CN system, where DMG is dimethylglyoxime (Butane-2,3-dione dioxime), at 50 °C under the same or similar conditions, we oxidized eleven RH hydrocarbons of different structures: mono-, bi- and tri-cyclic, framework and aromatic. To compare the composition of the oxidation products of these hydrocarbons, we introduced a new quantitative characteristic, “distributive oxidation depth D(O), %” and showed the effectiveness of its application. The adiabatic ionization potentials (AIP) and the vertical ionization potentials (VIP) of the molecules of eleven oxidized and related hydrocarbons were calculated using the DFT method in the B3LYP/TZVPP level of theory for comparison with experimental values and correlation with D(O). The same calculations of AIP were made for the molecules of the oxidant, solvent, DMG, related compounds and products. It is shown that component X, which determines the mechanism of oxidation of hydrocarbons RH with AIP(Exp) ≥ AIP(X) = 8.55 ± 0.03 eV, is a trans-DMG molecule. Firstly theoretically estimated experimental values of AIP(trans-DMG) = 8.53 eV and AIP(cis-DMG) = 8.27 eV.

A Keggin-type polyoxometalate-based metal-organic complex as a highly efficient heterogeneous catalyst for the selective oxidation of alkylbenzenes

The direct oxidation of C-H bonds in organic materials into necessary oxygen-containing compounds under mild conditions has attracted increasing attention. A Keggin-type polyoxometalate-based metal-organic complex (MOC), [CuII4Cu^I(H₂trz)₄(C₂O₄)(H₂O)₄(H₃PW_11.18CuII0.82O₄₀)]·8H₂O (1) (H₃trz = 1,2,4-triazole), was designed and synthesized under hydrothermal conditions, and was structurally characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. Complex 1 is a 3D 4,6,8-connected architecture derived from [Cu₅(H₂trz)₄(C₂O₄)₂(H₂O)₂]_n units and [PW_11.18Cu_0.82O₄₀]^6- anions, which can catalytically oxidize various types of alkylbenzenes. Gas chromatographic analysis showed that complex 1 as a heterogeneous catalyst could effectively catalyze the oxidation of diphenylmethane with 93% conversion and 99% selectivity within 6 h. In addition, the conversion for the catalytic oxidation of ethylbenzene was 96% with 99% selectivity. Compared with some reported catalysts, complex 1 exhibited a better catalytic effect and lower reaction time. Meanwhile, the catalytic oxidation of other benzyl derivatives with complex 1 was also investigated, which indicated that complex 1 possessed excellent catalytic performance.

Various amide derivatives induced Keggin-type SiW12O404−-based cobalt complexes: assembly, structure, electrochemical sensing and dye adsorption properties

Three new [SiW12O40]4−-based complexes assembled from three amide derivative ligands displayed excellent electrochemical sensing activities for BrO3−, NO2− and Cr(vi) ions and showed good adsorption capacities for methylene blue and neutral red dyes.

A self-assembly solvothermal synthesis of SiMoVn@[Cu6O(TZI)3(H2O)6]4·nH2O for the efficient selective oxidation of various alkylbenzenes

A series of SiMoVn@rht-MOF-1 were isolated via a one-pot self-assembly solvothermal synthesis, exhibiting effective catalytic activity and excellent recyclability.

Polyoxometalate-based CuII/CoII complexes tuned using various metal–pyrazole loops: design, diverse architectures and catalytic activity toward the oxidation of thioether derivatives

Three new polyoxometalate-based complexes with unique metal–pyrazole loops were synthesized, showing various architectures and finally resulting in different catalysis performance.

Hexameric to Trimeric Lanthanide-Included Selenotungstates and Their 2D Honeycomb Organic-Inorganic Hybrid Films Used for Detecting Ochratoxin A

Two types of organic-inorganic hybrid structure-related lanthanide (Ln)-included selenotungstates (Ln-SeTs) [H₂N(CH₃)₂]₁₁Na₇[Ce₄(H₂PTCA)₂(H₂O)₁₂(HICA)]₂[SeW₄O₁₇]₂[W₂O₅]₄[SeW₉O₃₃]₄·64H₂O (1, H₃PTCA = 1,2,3-propanetricarboxylic acid, H₂ICA = itaconic acid) and [H₂N(CH₃)₂]₆Na₄[Ln₄SeW₈(H₂O)₁₄(H₂PTCA)₂O₂₈] [SeW₉O₃₃]₂·31H₂O [Ln = Pr³⁺ (2), Nd³⁺ (3)] were obtained by Ln nature control. The primary frameworks of 1-3 are composed of trivacant Keggin-type [B-α-SeW₉O₃₃]^8- and [SeW₄O_m]^n- [Ln = Ce³⁺ (1), m = 17, n = 6; Ln = Pr³⁺ (2), Nd³⁺ (3), m = 18, n = 8] fragments bridged by organic ligands and Ln clusters. Intriguingly, Ln nature results in the degradation of hexameric 1 to trimeric 2-3. Besides, 1@DMDSA and 3@DMDSA composites (DMDSA·Cl = dimethyl distearylammonium chloride) were prepared through the cation exchange method, which were then reorganized to form two-dimensional (2D) honeycomb thin films by the breath figure method. Using these honeycomb thin films as electrode materials, the aptasensors were further established by utilizing methylene blue as an indicator and cDNA and Au nanoparticles as signal amplifiers to enhance the response signal so as to realize the purpose of ochratoxin A (OTA) detection. This work provides a new platform for detecting OTA and explores the application potential of POM-based composites in biological and clinical analyses.

Exploring the Coordination Modes of a Keggin-Type [ZnW12O40]6- Anionic Cluster: Bonding Patterns, Crystal Structure, and Semiconducting Properties

Polyoxometalate-based organic-inorganic hybrid compounds (POIHCs) have been greatly developed due to their wide application prospects, but the pursuit of their directed synthesis via molecular design still remains a challenge. Herein, we demonstrate that the coordination modes of the Keggin-type [ZnW₁₂O₄₀]^6- anion can be tuned, which leads to different semiconductor characteristics. Using the same building block, ligand, and metal ion (ZnW₁₂, phen, Cu²⁺), we synthesized three new POIHCs with different bonding patterns by means of different coordination modes of ZnW₁₂. The three POIHCs (H₂phen){ZnW₁₂O₄₀[Cu(phen)₂]₂}·3H₂O (1), {ZnW₁₂O₄₀[Cu(phen)(H₂O)₂]₂[Cu(phen)(H₂O)]}_n·3H₂O (2), and (Me₄N)₂{ZnW₁₂O₄₀[Cu(phen)(H₂O)]₂}_n·5H₂O (3) (phen = 1,10-phenanthroline) have been structurally characterized by single-crystal X-ray diffraction. Compound 1 appears as a zero-dimensional coordination complex cluster, while compounds 2 and 3 are both 1D chain structures with different Cu²⁺ bridge linkages. Although these three POIHCs possess the same chemical components, their semiconductor properties are different, which is demonstrated by measurements of transient photocurrent and band gap (E_g) values. Furthermore, we carried out comparative experiments on the photoconductivity performance of compounds 1-3 and their photocatalytic reduction from O₂ to H₂O₂, indicating the significant influence of the energy level matching on the photocatalytic activity.

Polyoxometalate-Incorporated Framework as a Heterogeneous Catalyst for Selective Oxidation of C-H Bonds of Alkylbenzenes

Developing new catalysts for highly efficient and selective oxidation of saturated C-H bonds is significant due to their thermodynamic strength. Via incorporation of PW₁₂O₄₀^3-, pyridine-2,5-dicarboxylic acids (pydc), and Fe(III) ions into one framework, a new polyoxometalate-based metal-organic framework, [HFe₄O₂(H₂O)₄(pydc)₃PW₁₂O₄₀]·10.5H₂O (FeW-PYDC), was successfully prepared by a hydrothermal method. Interestingly, FeW-PYDC features a three-dimensional porous structure with {Fe₄O₂} interconnecting with PW₁₂O₄₀^3- units. FeW-PYDC displayed excellent performance in the selective oxidation of C-H bonds of alkylbenzenes with high conversion (95.7%) and selectivity (96.6%). As an effective heterogeneous catalyst, FeW-PYDC demonstrates good reusability and structural stability.

Regulating the catalytic activity of multi-Ru-bridged polyoxometalates based on differential active site environments with six-coordinate geometry and five-coordinate geometry transitions

Five-coordinate geometry around ruthenium with highly exposed active sites has attracted intensive scientific interest due to its superior properties and extensive applications. Herein, we report a series of structurally controllable multi-Ru-bridged polyoxometalates, K5NaH10[{Ru4(H2O)n}(WO2)4(AsW9O33)4]·mH2O {1, 1-dehyd-373K, 1-dehyd-473K, 1-dehyd-573K; n = 4, m = 36; n = 4, m = 6; n = 4, m = 0; n = 0, m = 0} fabricated through a feasible assembly strategy using arsenotungstate {2, KNa12H17Cl2(As4W40O140)·29H2O} as a structure-directing unit. Systematic characterization methods identified that the six-coordinate geometry can successfully transform into five-coordinate geometry about active sites (Ru) by removing aqua ligands under high reaction temperatures. All the multi-Ru-bridged polyoxometalates demonstrated strong stability and catalytic effectiveness in the transformation of 1-(4-chlorophenyl)ethanol to 4'-chloroacetophenone under very mild conditions. 1-dehyd-573K, specifically, achieves the best catalytic effectiveness with a turnover frequency (TOF) = 25 100·h-1 owing to its unique five-coordinate geometry on the Ru sites. To our knowledge, 1-dehyd-573K outperforms other POM-based catalysts in the oxidative catalysis of 1-(4-chlorophenyl)ethanol. The heterogeneous polyoxometalates were also proven to be strongly reusable, with their structural integrities well maintained after multiple-cycle catalytic reactions.

Template-Induced {Mn2}-Organic Framework with Lewis Acid-Base Canals as a Highly Efficient Heterogeneous Catalyst for Chemical Fixation of CO2 and Knoevenagel Condensation

The target for the self-assembly of functional microporous metal-organic frameworks (MOFs) could be realized by employing ligand-directed and/or template-induced strategies, which prompted us to explore the synthetic technique of d¹⁰ secondary-building-unit-based nanoporous frameworks. Here, the exquisite combination of a paddle-wheel [Mn₂(CO₂)₆(OH₂)₂] cluster and a TDP^6- ligand contributes one robust honeycomb framework of {(Me₂NH₂)₂[Mn₂(TDP)(H₂O)₂]·3H₂O·3DMF}_n (NUC-31; DMF = N,N-dimethylformamide), whose activated state with the removal of associated aqueous molecules characterizes the outstanding physicochemical properties of nanochannels, penta- and tetracoordinated Mn²⁺ serving as highly open metal sites, rich Lewis base sites (rows of C═O groups and N_pyridine atoms), and excellent thermal stability. Moreover, it is worth mentioning that Lewis acid-base sites on the inner surface of the channels in activated NUC-31 successfully form one unprecedented canal-shaped acid-base confined space with evenly distributed open metal sites of Mn²⁺ and N_pyridine atoms as the canal bottom as well as two rows of C═O groups serving as dyke dams. Catalytic experiments displayed that activated NUC-31 could serve as an efficient heterogeneous catalyst for the chemical fixation of CO₂ with epoxides into cyclic carbonates under mild conditions. Furthermore, NUC-31 could effectively catalyze the reaction Knoevenagel condensation, which should be ascribed to the synergistic polarization effect aroused from its plentiful Lewis base sites in the confined channel space. Hence, these results demonstrate that the employment of ligand-directed and template-dependent strategies could overcome the self-assembled barriers of functional microporous MOFs and achieve unexpected frameworks.

A Copper-Containing Polyoxometalate-Based Metal-Organic Framework as an Efficient Catalyst for Selective Catalytic Oxidation of Alkylbenzenes

A copper-containing polyoxometalate-based metal-organic framework (POMOF), Cu^I₁₂Cl₂(trz)₈[HPW₁₂O₄₀] (HENU-7, HENU = Henan University; trz = 1,2,4-triazole), has been successfully synthesized and well-characterized. In addition, the excellent catalytic ability of HENU-7 has been proved by the selective oxidation of diphenylmethane. Under the optimal conditions, the diphenylmethane conversion obtained over HENU-7 is 96%, while the selectivity to benzophenone is 99%, which outperforms most noble-metal-free POM-based catalysts. Moreover, HENU-7 is stable to reuse for five runs without an obvious loss in activity and also can catalyze the oxidation of different benzylic C-H with satisfactory conversions and selectivities, which implied the significant catalytic activity and recyclability.

V═O Functionalized {Tm2}-Organic Framework Designed by Postsynthesis Modification for Catalytic Chemical Fixation of CO2 and Oxidation of Mustard Gas

In terms of recently documented references, the introduction of V═O units into porous MOF/COF frameworks can greatly improve their original performance and expand their application prospects due to a change in their electronegativity. In this work, by a cation-exchange strategy, a consummate combination of separate 4f [Tm₂(CO₂)₈] SBUs and 3d [V^IVO(H₂O)₂] units generated the functionalized porous metal-organic framework {(Me₂NH₂)₂[VO(H₂O)][Tm₂(BDCP)₂]·3DMF·3H₂O}_n (NUC-11), in which [Tm₂(CO₂)₈] SBUs constitute the fundamental 3D host framework of {[Tm₂](BDCP)₂}_n along with [V^IVO(H₂O)₂] units being further docked on the inner wall of channels by covalent bonds. Significantly, NUC-11 represents the first example of V═O modified porous MOFs, in which uncoordinated carboxylic groups (-CO₂H) further grasp the functional [V^IVO(H₂O)₂] units on the initial basic skeleton along with the formation of covalent bonds as fixed ropes. Furthermore, activated samples of NUC-11 displayed a good catalytic performance for the chemical synthesis of carbonates from related epoxides and CO₂ with high conversion rate. Moreover, by employing NUC-11 as a catalyst, a simulator of mustard gas, 2-chloroethyl ethyl sulfide, could be quickly and efficiently oxidized into low-toxicity products of oxidized sulfoxide (CEESO). Thus, this study offers a brand new view for the design and synthesis of functional-units-modified porous MOFs, which could be potentially applied as an excellent candidate in the growing field of efficient catalysis.

Nanochannel-based heterometallic {ZnIIHoIII}-organic framework with high catalytic activity for the chemical fixation of CO2

The exquisite combination of ZnII and HoIII generated the highly robust [ZnHo(CO2)6(OH2)]-based heterometallic framework of {[ZnHo(TDP)(H2O)]·5H2O·3DMF} n (NUC-30, H6TDP = 2,4,6-tri(2',4'-dicarboxyphenyl)pyridine), which featured outstanding physicochemical properties, including honeycomb nanochannels, high porosity, large specific surface area, the coexistence of highly open Lewis acid-base sites, good thermal and chemical stability, and resistance to most organic solvents. Due to its extremely unsaturated metal tetra-coordinated Zn(ii) ions, hepta-coordinated Ho(iii) and high faveolate void volume (61.3%), the conversion rate of styrene oxide and CO2 into cyclic carbonates in the presence of 2 mol% activated NUC-30 and 5 mol% n-Bu4NBr reached 99% under the mild conditions of 1.0 MPa and 60 °C. Furthermore, the luminescence sensing experiments proved that NUC-30 could be used as a fast, sensitive and highly efficiency sensor for the detection of Fe3+ in aqueous solution. Therefore, these results prove that nanoporous MOFs assembled from pyridine-containing polycarboxylate ligands have wide applications, such as catalysis and as luminescent materials.

One Robust Microporous TmIII-Organic Framework for Highly Catalytic Activity on Chemical CO2 Fixation and Knoevenagel Condensation

In terms of documented references, multifunctional MOFs with high catalytic performance could be constructed from the combination of metal cations and polycarboxyl-pyridine ligands, which could efficiently endow crystallized porous frameworks with the coexisting Lewis acid-base properties. Thus, by employing a ligand-directed synthetic strategy, the exquisite combination of wave-like inorganic chains of [Tm(CO₂)₃(OH₂)]_n and mononuclear units of [Tm(CO₂)₄(OH₂)₂] with the aid of the specially designed ligand of 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine (H₅BDCP) generates one highly robust microporous framework of {(Me₂NH₂)[Tm₃(BDCP)₂)(H₂O)₃]·4DMF·H₂O}_n (simplified as NUC-25), which contains near-rectangular nanochannels and large solvent-residing voids. Furthermore, the activated state of NUC-25 with the removal of associated water molecules is a rarely reported bifunctional heterogeneous catalyst due to the coexistence of Lewis acid-base sites including 6-coordinated Tm³⁺ ions, uncoordinated carboxyl oxygen atoms, and N_pyridine atoms. Just as expected, NUC-25 exhibits greatly high catalytic activity for the cycloaddition reaction of epoxides with CO₂ into alkyl cyclic carbonates under bland solvent-free conditions, which should be ascribed to the polarity of nitrogen-containing pyridine heterocycles as Lewis base sites on the inner surface of nano-caged voids except for recognized Lewis acid sites of rare earth cations. Moreover, the excellent pore-size-dependent catalytic property for Knoevenagel condensation reactions confirms that NUC-25 can be viewed as a recyclable bifunctional heterogeneous catalyst. Therefore, these results strongly demonstrate that microporous MOFs assembled from pre-designed polycarboxyl-heterocyclic ligands display better catalytic performance not only for chemical CO₂ fixation but also for Knoevenagel condensation reactions.

Magneto-structural correlations of cyclo-tetravanadates functionalized with mixed-ligand copper(ii) complexes

Bimetallic materials based on tetravanadate anions and mixed ligand copper(ii) complexes were readily synthesized under non-hydrothermal conditions. The compounds show interesting structural and magnetic diversity mediated by copper symmetry.

Polyoxometalate-based metal–organic frameworks for heterogeneous catalysis

POM-based MOFs simultaneously possessing the virtues of POMs and MOFs exhibit excellent heterogeneous catalytic properties.

An NH2-modified {EuIII2}–organic framework for the efficient chemical fixation of CO2 and highly selective sensing of 2,4,6-trinitrophenol

An amino-functionalized microporous material of {(Me2NH2)4[Eu4(DDAC)3(HCO2)(OH2)2]·8DMF·9H2O}n with hierarchical pore voids displays efficient chemical fixation of CO2 and highly selective sensing of 2,4,6-trinitrophenol.

POM@MOF Hybrids: Synthesis and Applications

The hybrid materials that are created by supporting or incorporating polyoxometalates (POMs) into/onto metal–organic frameworks (MOFs) have a unique set of properties. They combine the strong acidity, oxygen-rich surface, and redox capability of POMs, while overcoming their drawbacks, such as difficult handling, a low surface area, and a high solubility. MOFs are ideal hosts because of their high surface area, long-range ordered structure, and high tunability in terms of the pore size and channels. In some cases, MOFs add an extra dimension to the functionality of hybrids. This review summarizes the recent developments in the field of POM@MOF hybrids. The most common applied synthesis strategies are discussed, together with major applications, such as their use in catalysis (organocatalysis, electrocatalysis, and photocatalysis). The more than 100 papers on this topic have been systematically summarized in a handy table, which covers almost all of the work conducted in this field up to now.

H-shaped oxalate-bridging lanthanoid-incorporated arsenotungstates

A series of oxalate-bridging di-Ln³⁺-incorporated H-shaped polyoxometalates were synthesized and their stability in solution was evidenced by Raman spectroscopy.

An unprecedented cobalt(ii)-containing Wells–Dawson-type tungstovanadate-based metal–organic framework as an efficient catalyst for ring-opening polymerization of ε-caprolactone

An unprecedented organic–inorganic hybrid material based on Wells–Dawson-type tungstovanadate building blocks and cobalt(ii)–organic framework with a bis(triazole) ligand was prepared and employed to catalyze solvent-free ROP of caprolactone.