Chiral Separation of Styrene Oxides Supported by Enantiomeric Tetrahedral Neutral Pd(II) Cages

M(II) effect on encapsulation of guests into a series of M3L2 chiral cages: enantio-recognition

Self-assembly of M(ClO4)2 (M2+ = Ni2+, Cu2+, and Zn2+) with (1S,1'S,1''S,2R,2'R,2''R)-(benzenetricarbonyltris(azanediyl))tris(2,3-dihydro-1H-indene-2,1-diyl) trinicotinate (s,r-L) and the corresponding enantiomer (r,s-L) as a pair of chiral tridentate donors gives rise to the chiral cage pairs [M3(s,r- and r,s-L)2](ClO4)6. For the two pairs of [(Me2CO)(H2O)@M3(r,-s and s,r-L)2](ClO4)6 (M2+ = Ni2+ and Zn2+), the inner cavity is occupied by both an acetone and a single water molecule, whereas for the copper(II) pair of [Me2CO@Cu3(r,s- and s,r-L)2](ClO4)6 under the same conditions, the cavity is filled by only one acetone molecule. Thus, the encapsulation of guest molecules into the cages during self-assembly shows significant metal(II) ion effects. These chiral cages are effective for the enantio-recognition of chiral (S)-2-butanol and (R)-2-butanol via the shifts of the electrochemical oxidation potentials obtained by the linear sweep voltammetry (LSV) technique, density functional theory (DFT) calculations, and the chiral 2-butanol adsorption in the single-crystal-to-single-crystal (SCSC) mode.

Squarate-Tethered Enantiomeric Imido-Pd(II) Cages for Recognition and Separation of Chiral Organic Molecules

Chiral coordination cages have emerged as an efficient platform for enantioselective processes via host-guest interactions. Here, we report an enantiomeric pair of tetrahedral cages of formula [(Pd3[PO(N(*CH(CH3)Ph)3])4(C4O4)6] supported by chiral tris(imido)phosphate trianions and squarate (C4O4)2- linkers. These cages exhibit unusual coordination isomerism for Pd(II)-linker bonds compared with the other Pd(II) cages of this family. Further, they were employed for the recognition and separation of small chiral molecules containing various functionalities. High enantioselectivities of 67 and 41 were found in the case of R-4-hydroxydihydrofuran-2(3H)-one and S-epichlorohydrin, recognized by the R-isomer of the cage. Chiral separation studies showed remarkable enantiomeric excess values of 93 and 85% for S-epichlorohydrin and R-4-benzyl-2-oxazolidinone, respectively, from their racemic mixtures. These studies showcase the potential of coordination cages for enantioselective applications.

Synthesis of an Adaptable Molecular Barrel and Guest Mediated Stabilization of Its Metastable Higher Homologue

Structural and functional modulation of three-dimensional artificial macromolecular systems is of immense importance. Designing supramolecular cages that can show stimuli mediated reversible switching between higher-order structures is quite challenging. We report here construction of a Pd₆ trifacial barrel (1) by coordination self-assembly. Surprisingly, barrel 1 was found to exhibit guest-responsive behavior. In presence of fullerenes C₆₀ and C₇₀, 1 unprecedentedly transformed to its metastable higher homologue Pd₈ tetrafacial barrel (2), forming stable host-guest complexes (C₆₀)₃⊂2 and (C₇₀)₂⊂2, respectively. Again, encapsulated fullerenes could be extracted from the cavity of 2 using 1,2-dichlorobenzene, leading to its facile conversion to the parent trifacial barrel 1. Such reversible structural interconversion between an adaptable molecular barrel and its guest stabilized higher homologue is an uncommon observation.

Enantioseparation in Hierarchically Porous Assemblies of Homochiral Cages

Efficient enantioselective separation using porous materials requires tailored and diverse pore environments to interact with chiral substrates; yet, current cage materials usually feature uniform pores. Herein, we report two porous assemblies, PCC-60 and PCC-67, using isostructural octahedral cages with intrinsic microporous cavities of 1.5 nm. The PCC-67 adopts a densely packed mode, while the PCC-60 is a hierarchically porous assembly featuring interconnected 2.4 nm mesopores. Compared with PCC-67, the PCC-60 demonstrates excellent enantioselectivity and recyclability in separating racemic diols and amides. This solid adsorbent PCC-60 is further utilized as a chiral stationary phase for high-performance liquid chromatography (HPLC), enabling the complete separation of six valuable pharmaceutical intermediates. According to quantitative dynamic experiments, the hierarchical pores facilitate the mass transfer within the superstructure, shortening the equilibrium time for adsorbing chiral substrates. Notably, this hierarchically porous material PCC-60 indicates remarkably higher enantiomeric excess (ee) values in separating racemates than PCC-67 with uniform microporous cavities. Control experiments confirm that the presence of mesopores enables the PCC-60 to separate bulky substrates. These results uncover the traditionally underestimated role of hierarchical porosity in porous-superstructure-based enantioseparation.

Guest-Driven Self-Assembly and Chiral Induction of Photofunctional Lanthanide Tetrahedral Cages

Chiral luminescent lanthanide-organic cages have many potential applications in enantioselective recognition, sensing, and asymmetric catalysis. However, due to the paucity of structures and their limited cavities, host-guest chemistry with lanthanide-organic cages has remained elusive so far. Herein, we report a guest-driven self-assembly and chiral induction approach for the construction of otherwise inaccessible Ln₄L₄-type (Ln = lanthanide ions, i.e., Eu^III, Tb^III; L = ligand) tetrahedral hosts. Single crystal analyses on a series of host-guest complexes reveal remarkable guest-adaptive cavity breathing on the tetrahedral cages, reflecting the advantage of the variation tolerance on coordination geometry of the f-elements. Meanwhile, noncovalent confinement of pyrene within the lanthanide cage not only leads to diminishment of its excimer emission but also facilitates guest to host energy transfer, opening up a new sensitization window for the lanthanide luminescence on the cage. Moreover, stereoselective self-assembly of either Λ₄- or Δ₄- type Eu₄L₄ cages has been realized via chiral induction with R/S-BINOL or R/S-SPOL templates, as confirmed by NMR, circular dichroism (CD), and circularly polarized luminescence (CPL) with high dissymmetry factors (g_lum) up to ±0.125.

A biomimetic metal–organic framework with cuboid inner cavities for enantioselective separation

A biomimetic metal–organic framework with cuboid inner cavities and multiple recognition sites was constructed from a phenylalanine-derived ligand. It can enantioselectively separate various racemic alcohols, diols and epoxides with ee up to 99.5%.

Polyanionic Imido-P(V) Ligands: From Transition Metal Complexes to Coordination Driven Self-Assemblies

The chemistry of the imido-anions of the main group elements has been studied for more than three decades. The imido (NR)^- group is isoelectronic to the oxo (=O) group and can coordinate with metal ions through its lone pairs of electrons. The polyimido-P(V) anions are well explored as they resemble the phosphorus oxo moieties such as H₃ PO₄ , H₂ PO₄ ^- , HPO₄ ^2- and PO₄ ^3- species. These imido anions are typically generated using strong main group organometallic reagents such as ⁿ BuLi, Et₂ Zn, Me₃ Al and ⁿ Bu₂ Mg, etc. As a result, their coordination chemistry has been restricted to reactions in anhydrous aprotic solvents for a few main group metal ions. This account presents our findings on using certain soft transition metal such Ag(I) and Pd (II) for isolating these imido-P(V) anions as their corresponding self-assembled clusters and cages. Using the various salts of Ag(I) ions in reaction with 2-pyridyl (² Py) functionalized phosphonium salts and phosphoric triamides, we obtained the mono- and dianionic form of these imido ligands {[P(N² Py)₂ (NH² Py)₂ ]^- , [P(N² Py)₂ (NH² Py)]^- , [PO(N² Py)(NH² Py)₂ ]^2- } and derived interesting examples of tri, penta, hepta and octanuclear Ag(I) clusters. Interestingly, by using the salts of Pd (II) ions, the elusive imido-phosphate trianions of the type [(RN)₃ PO]^3- (R=^t Bu, ^c Hex, ⁱ Pr) were generated in a facile one pot reaction as their corresponding tri- and hexanuclear clusters of the type {Pd₃ [(NR)₃ PO](OAc)₃ }_n (n=1 or 2). These trianions acts as a cis-coordinated hexadentate ligand for a trinuclear Pd (II) cluster and serve as the polyhedral building units for constructing hitherto unknown family of neutral cages in tetrahedral {Pd₃ [(Nⁱ Pr)₃ PO]₄ (L)₆ } and cubic {Pd₃ [(Nⁱ Pr)₃ PO]₈ (L)₁₂ } structures in the presence of suitable linker ligands (L^2- ). These cages show interesting host-guest chemistry and post-assembly reactions. Remarkably, by employing chiral tris(imido)phosphate trianions, enantiopure chiral cages of the type [(Pd₃ X*)₄ (L)₆ ], ([X*]^3- =RRR- or SSS-[PO(N(*CH(CH₃ )Ph)₃ ]^3- ), were synthesized and used for the chiral-recognition and enantio-separation of small racemic guest molecules. Some of these chiral cages were also shown to exhibit polyradical framework structures. In future, these and other similar types of cages are envisioned as potential molecular vessels for performing the reactions in their confined environment. The enantiomeric cages can be probed for asymmetric catalysis and the separation of a range of small chiral molecules.

Homochiral Dodecanuclear Lanthanide "Cage in Cage" for Enantioselective Separation

It is extremely difficult to anticipate the structure and the stereochemistry of a complex, particularly when the ligand is flexible and the metal node adopts diverse coordination numbers. When trivalent lanthanides (Ln^III) and enantiopure amino acid ligands are utilized as building blocks, self-assembly sometimes yields rare chiral polynuclear structures. In this study, an enantiopure carboxyl-functionalized amino acid-based ligand with C₃ symmetry reacts with lanthanum cations to give a homochiral porous coordination cage, (Δ/Λ)₁₂-PCC-57. The dodecanuclear lanthanide cage has an unprecedented octahedral "cage-in-cage" framework. During the self-assembly, the chirality is transferred from the enantiopure ligand and fixed by the binuclear lanthanide cluster to give 12 metal centers that have either Δ or Λ homochiral stereochemistry. The cage exhibits excellent enantioselective separation of racemic alcohols, 2,3-dihydroquinazolinones, and multiple commercially available drugs. This finding exhibits a rare example of a multinuclear lanthanide complex with a dual-walled topology and homochirality. The highly ordered self-assembly and self-sorting of flexible amino acids and lanthanides shed light on the chiral transformation between different complicated artificial systems that mimic natural enzymes.

Enantiopure Polyradical Tetrahedral Pd12 L6 Cages

The synthesis of cages with a polyradical framework remains a challenging task. Herein is reported an enantiomeric pair of quinoid-bridged polyradical tetrahedral palladium(II) cages that are stabilized by an unusual dianionic diradical form (dhbq^..2- ). These cages have been characterized by electron paramagnetic resonance and UV-visible spectroscopy, squid magnetometry and mass spectrometry. Single-crystal-derived X-ray investigations of the iso-structural cages built on fluoranilate linkers confirm the tetrahedral structure of the obtained radical cages. Theoretical calculations showed that the diradical state of the dhbq anions is more stable than the usual monoradical state. A weak ferromagnetic exchange between adjacent radical centers was observed in DFT studies.

Metal–organic cages for molecular separations

Separation technology is central to industries as diverse as petroleum, pharmaceuticals, mining and life sciences. Metal-organic cages, a class of molecular containers formed via coordination-driven self-assembly, show great promise as separation agents. Precise control of the shape, size and functionalization of cage cavities enables them to selectively bind and distinguish a wide scope of physicochemically similar substances in solution. Extensive research has, thus, been performed involving separations of high-value targets using coordination cages, ranging from gases and liquids to compounds dissolved in solution. Enantiopure capsules also show great potential for the separation of chiral molecules. The use of crystalline cages as absorbents, or the incorporation of cages into polymer membranes, could increase the selectivity and efficiency of separation processes. This Review covers recent progress in using metal-organic cages to achieve separations, with discussion of the many methods of using them in this context. Challenges and potential future developments are also discussed.

Engineering a homochiral metal–organic framework based on an amino acid for enantioselective separation

A homochiral metal–organic framework is constructed from an amino acid-derived ligand and it exhibits high enantioseparation capacities for alcohols, epoxides, and ibuprofen.