2-Hydroxychalcone as a Novel Natural Photosynthesis Inhibitor against Bloom-Forming Cyanobacteria

The use of a benign fast-growing cyanobacterial species to control microcystin synthesis from Microcystis aeruginosa

Introduction

Microcystis aeruginosa (M. aeruginosa), one of the most prevalent blue-green algae in aquatic environments, produces microcystin by causing harmful algal blooms (HAB). This study investigated the combined effects of nutrients and cyanobacterial subpopulation competition on synthesizing microcystin-LR.

Method

In varied nitrogen and phosphorus concentrations, cyanobacterial coculture, and algicidal DCMU presence, the growth was monitored by optical density analysis or microscopic counting, and the microcystin production was analyzed using high-performance liquid chromatography-UV. Furthermore, growth and toxin production were predicted using MATLAB.

Results and discussion

First, coculturing with a fast-growing cyanobacterium Synechococcus elongatus UTEX 2973 (S. elongatus) reduced M. aeruginosa biomass and microcystin production at 30oC. Under high nitrogen and low phosphorus conditions, S. elongatus is mostly effective, with up to 94.7% and 92.4% limitation of M. aeruginosa growth and toxin synthesis, respectively. Second, this biological strategy became less effective at 23oC, where S. elongatus grew slower. Third, photosynthesis inhibitor DCMU (3-(3,4-dichlorophenyl)-1,1-dimethylurea) hindered M. aeruginosa growth (at 0.1 mg/L) and microcystin production (at 0.02 mg/L). DCMU was also effective for controlling microcystin production in S. elongatus-M. aeruginosa cocultures. Based on experimental results, a multi-substrate, multi-species kinetic model was built to describe coculture growth and population interactions.

Conclusion

Future research should examine more complex models to further develop and refine to facilitate the derivation of more effective recommendations for health prevention programs, particularly for mothers and girls.

Prolonged Microcystis restraint through allelochemicals sustained-release microspheres regulated by carbon material (CM-AC@SM): Optimal formulation, characterization, effects and synergistic inhibition mechanisms

The Microcystis blooms have caused serious damage to aquatic ecosystems. Microspheres containing allelochemicals with sustained-release properties have the potential to function as a cost-effective and environmentally friendly algaecide against M. aeruginosa. In the current investigation, we successfully optimized the synthesis of allelochemicals sustained-release microspheres regulated by carbon material (CM-AC@SM), which demonstrated a high embedding rate (90.17 %) and loading rate (0.65 %), with an accumulative release rate of 53.27 % on day 30. To investigate the sustained-release mechanism of CM-AC@SM, the sustained-release process of allelochemicals was determined using the Folin-Phenol method and the immersion behavior of the CM-AC@SM was characterized through SEM and XPS. Results showed that allelochemicals were released in the delayed-dissolution mode. In addition, to elucidate the synergistic mechanism of CM-AC@SM towards the inhibition of M. aeruginosa, this study comprehensively assessed the effects of allelochemicals, carbon material and CM-AC@SM on the morphology, antioxidant system activity and photosynthetic activity of M. aeruginosa. The findings indicated that allelochemicals and carbon material induced intracellular protein and nucleic acid leakage by increasing cell membrane permeability, disrupted the extracellular and intracellular morphology of algae, triggered peroxidative damage and restrained antioxidant system activity by stimulating the generation of reactive oxygen species. Simultaneously, the activity of photosystem II was inhibited by allelochemicals and carbon material, substantiated by the reduction in Fv/Fo and Fv/Fm ratios. Hence, CM-AC@SM shows promise in inhibiting M. aeruginosa, offering an efficient approach for the future large-scale control of harmful algal blooms (HABs).

Release of algal organic matter from cyanobacteria following application of USEPA-registered chemical algaecides

Increased occurrence of harmful algal blooms significantly impedes uses of freshwater resources, especially as potable water supply. Rapid mitigation using algaecides is common; however, the potential release of algal organic matter (AOM) and cyanotoxins poses challenges due to the difficulty of removal with conventional water treatment and negative health impacts. This study evaluated four USEPA-registered algaecides for their efficacy against Microcystis aeruginosa growth and AOM and cyanotoxin release. Successful inhibition of cell growth was achieved in both unialgal and mixed culture samples at concentrations of 0.2 mg Cu/L for copper-based algaecides and 6 mg H2O2/L for peroxide-based algaecides. At 12 h after treatment (HAT), a significant increase in dissolved phycocyanin was observed, which was more pronounced with copper-based algaecides. Microbial byproduct-related and simple aromatic proteins were measured in the unialgal culture, while microbial byproduct-related proteins and humic-like substances were dominant in the mixed culture samples. In both unialgal and mixed-culture experiments, 0.2 mg Cu/L application of copper-based algaecides was the minimum dosage for cyanobacterial cell inhibition and the lowest release of AOM and cyanotoxins, with Oximycin P5 at 6 mg H2O2/L yielding similar results among peroxide-based algaecides. These results help inform water supply managers on algaecide use toward maintaining integrity of drinking water quality.

Target Fishing Reveals a Novel Mechanism of N-Acylamino Saccharin Derivatives Targeting Glyceraldehyde-3-Phosphate Dehydrogenase toward Cyanobacterial Blooms Control

Based on current challenges of poor targeting and limited choices in chemical control methods of cyanobacterial blooms (CBs), identifying new targets is an urgent and formidable task in the quest for target-based algaecides. This study discovered N-acylamino saccharin derivatives exhibiting potent algicidal activity. Thus, using N-acylamino saccharin as the probes, glyceraldehyde-3-phosphate dehydrogenase from cyanobacterial (CyGAPDH) was identified as a new target of algaecides through the activity-based protein profiling (ABPP) strategy for the first time. Building upon the structure of Probe2, a series of derivatives were designed and synthesized, with compound b6 demonstrating the most potent inhibitory activity against CyGAPDH and Synechocystis sp. PCC6803 (IC50 = 1.67 μM and EC50 = 1.15 μM). Furthermore, the potential covalent binding model of b6 to the cysteine residue C154 was explored through covalent possibility prediction, LC-MS experiments, substrate competitive inhibition experiments, and molecular docking. Especially, the results revealed C154 as a crucial covalent binding site, with residues T184 and R11 forming robust hydrophobic interactions and H181 establishing significant hydrogen-bonding interactions with b6, highlighting their potential as essential pharmacophores. In summary, this study not only identifies a novel target of algaecides for the control of CB but also lays the solid foundation for the development of targeted covalent algaecides.

Novel technique for the ultra-sensitive detection of hazardous contaminants using an innovative sensor integrated with a bioreactor

This study introduces an evaluation methodology tailored for bioreactors, with the aim of assessing the stress experienced by algae due to harmful contaminants released from antifouling (AF) paints. We present an online monitoring system equipped with an ultra-sensitive sensor that conducts non-invasive measurements of algal culture's optical density and physiological stage through chlorophyll fluorescence signals. By coupling the ultra-sensitive sensor with flash-induced chlorophyll fluorescence, we examined the dynamic fluorescence changes in the green microalga Chlamydomonas reinhardtii when exposed to biocides. Over a 24-h observation period, increasing concentrations of biocides led to a decrease in photosynthetic activity. Notably, a substantial reduction in the maximum quantum yield of primary photochemistry (FV/FM) was observed within the first hour of exposure. Subsequently, we detected a partial recovery in FV/FM; however, this recovery remained 50% lower than that of the controls. Integrating the advanced submersible sensor with fluorescence decay kinetics offered a comprehensive perspective on the dynamic alterations in algal cells under the exposure to biocides released from antifouling coatings. The analysis of fluorescence relaxation kinetics revealed a significant shortening of the fast and middle phases,  along with an increase in the duration of the slow phase, for the coating with the highest levels of biocides. Combining automated culturing and measuring methods, this approach has demonstrated its effectiveness as an ultrasensitive and non-invasive tool for monitoring the physiology of photosynthetic cultures. This is particularly valuable in the context of studying microalgae and their early responses to various environmental conditions, as well as the potential to develop an AF system with minimal harm to the environment.

Anticyanobacterial effect of p-coumaric acid on Limnothrix sp. determined by proteomic and metabolomic analysis

Regulating photosynthetic machinery is a powerful but challenging strategy for selectively inhibiting bloom-forming cyanobacteria, in which photosynthesis mainly occurs in thylakoids. P-coumaric acid (p-CA) has several biological properties, including free radical scavenging and antibacterial effects, and studies have shown that it can damage bacterial cell membranes, reduce chlorophyll a in cyanobacteria, and effectively inhibit algal growth at concentrations exceeding 0.127 g/L. Allelochemicals typically inhibit cyanobacteria by inhibiting photosynthesis; however, research on inhibiting harmful algae using phenolic acids has focused mainly on their inhibitory and toxic effects and metabolite levels, and the molecular mechanism by which p-CA inhibits photosynthesis remains unclear. Thus, we examined the effect of p-CA on the photosynthesis of Limnothrix sp. in detail. We found that p-CA inhibits algal growth and damages photosynthesis-related proteins in Limnothrix sp., reduces carotenoid and allophycocyanin levels, and diminishes the actual quantum yield of Photosystem II (PSII). Moreover, p-CA significantly altered algal cell membrane protein systems, and PSII loss resulting from p-CA exposure promoted reactive oxygen species production. It significantly altered algae cell membrane protein systems. Finally, p-CA was found to be environmentally nontoxic; 80 % of 48-h-old Daphnia magna larvae survived when exposed to 0.15 g/L p-CA. These findings provide insight into the mechanism of cyanobacterial inhibition by p-CA, providing a more practical approach to controlling harmful algal blooms.

Physiological and molecular mechanisms of the inhibitory effects of artemisinin on Microcystis aeruginosa and Chlorella pyrenoidosa

Artemisinin, a novel plant allelochemical, has attracted attention for its potential selective inhibitory effects on algae, yet to be fully explored. This study compares the sensitivity and action targets of Microcystis aeruginosa (M. aeruginosa) and Chlorella pyrenoidosa (C. pyrenoidosa) to artemisinin algaecide (AMA), highlighting their differences. Results indicate that at high concentrations, AMA displaces the natural PQ at the QB binding site within M. aeruginosa photosynthetic system, impairing the D1 protein repair function. Furthermore, AMA disrupts electron transfer from reduced ferredoxin (Fd) to NADP+ by interfering with the iron-sulfur clusters in the ferredoxin-NADP+ reductases (FNR) domain of Fd. Moreover, significant reactive oxygen species (ROS) accumulation triggers oxidative stress and interrupts the tricarboxylic acid cycle, hindering energy acquisition. Notably, AMA suppresses arginine synthesis in M. aeruginosa, leading to reduced microcystins (MCs) release. Conversely, C. pyrenoidosa counters ROS accumulation via photosynthesis protection, antioxidant defenses, and by regulating intracellular osmotic pressure, accelerating damaged protein degradation, and effectively repairing DNA for cellular detoxification. Additionally, AMA stimulates the expression of DNA replication-related genes, facilitating cell proliferation. Our finding offer a unique approach for selectively eradicating cyanobacteria while preserving beneficial algae, and shed new light on employing eco-friendly algicides with high specificity.

Design, Synthesis, and Mode of Action of Thioacetamide Derivatives as the Algicide Candidate Based on Active Substructure Splicing Strategy

Lakes and reservoirs worldwide are experiencing a growing problem with harmful cyanobacterial blooms (HCBs), which have significant implications for ecosystem health and water quality. Algaecide is an effective way to control HCBs effectively. In this study, we applied an active substructure splicing strategy for rapid discovery of algicides. Through this strategy, we first optimized the structure of the lead compound S5, designed and synthesized three series of thioacetamide derivatives (series A, B, C), and then evaluated their algicidal activities. Finally, compound A3 with excellent performance was found, which accelerated the process of discovering and developing new algicides. The biological activity assay data showed that A3 had a significant inhibitory effect on M. aeruginosa. FACHB905 (EC50 = 0.46 μM) and Synechocystis sp. PCC6803 (EC50 = 0.95 μM), which was better than the commercial algicide prometryn (M. aeruginosa. FACHB905, EC50 = 6.52 μM; Synechocystis sp. PCC6803, EC50 = 4.64 μM) as well as better than lead compound S5 (M. aeruginosa. FACHB905, EC50 = 8.80 μM; Synechocystis sp. PCC6803, EC50 = 7.70 μM). The relationship between the surface electrostatic potential, chemical reactivity, and global electrophilicity of the compounds and their activities was discussed by density functional theory (DFT). Physiological and biochemical studies have shown that A3 might affect the photosynthesis pathway and antioxidant system in cyanobacteria, resulting in the morphological changes of cyanobacterial cells. Our work demonstrated that A3 might be a promising candidate for the development of novel algicides and provided a new active skeleton for the development of subsequent chemical algicides.

Understanding the Risks of Diffusion of Cyanobacteria Toxins in Rivers, Lakes, and Potable Water

Blue-green algae, or cyanobacteria, may be prevalent in our rivers and tap water. These minuscule bacteria can grow swiftly and form blooms in warm, nutrient-rich water. Toxins produced by cyanobacteria can pollute rivers and streams and harm the liver and nervous system in humans. This review highlights the properties of 25 toxin types produced by 12 different cyanobacteria genera. The review also covered strategies for reducing and controlling cyanobacteria issues. These include using physical or chemical treatments, cutting back on fertilizer input, algal lawn scrubbers, and antagonistic microorganisms for biocontrol. Micro-, nano- and ultrafiltration techniques could be used for the removal of internal and extracellular cyanotoxins, in addition to powdered or granular activated carbon, ozonation, sedimentation, ultraviolet radiation, potassium permanganate, free chlorine, and pre-treatment oxidation techniques. The efficiency of treatment techniques for removing intracellular and extracellular cyanotoxins is also demonstrated. These approaches aim to lessen the risks of cyanobacterial blooms and associated toxins. Effective management of cyanobacteria in water systems depends on early detection and quick action. Cyanobacteria cells and their toxins can be detected using microscopy, molecular methods, chromatography, and spectroscopy. Understanding the causes of blooms and the many ways for their detection and elimination will help the management of this crucial environmental issue.