Development of an Immunoassay for Chloramphenicol Based on the Preparation of a Specific Single-Chain Variable Fragment Antibody

Generation of a highly specific recombinant full-length antibody for detecting ethirimol in fruit and environmental water

High-performance antibodies are core reagents for highly sensitive immunoassays. Herein, based on a novel hapten, a hybridoma secreting the high-affinity anti-ethirimol monoclonal antibody (mAb-14G5F6) was isolated with an IC50 value of 1.35 μg/L and cross-reactivity below 0.20% for 13 analogs. To further address the challenge of hybridoma preservation and antibody immortalization, a recombinant full-length antibody (rAb-14G5F6) was expressed using the HEK293(F) expression system based on the mAb-14G5F6 gene. The affinity, specificity, and tolerance of rAb-14G5F6, as characterized by indirect competitive enzyme-linked immunosorbent assay and noncompetitive surface plasmon resonance, exhibited high concordance with those of mAb-14G5F6. Further immunoassays based on rAb-14G5F6 were developed for irrigation water and strawberry fruit with limits of detection of 0.0066 and 0.036 mg/kg, respectively, recoveries of 80100%, and coefficients of variation below 10%. Furthermore, homology simulation and molecular docking revealed that GLU(L40), GLY(L107), GLY(H108), and ASP(H114) play important roles in forming hydrogen bonds and pi-anion ionic bonds between rAb-14G5F6 and ethirimol, resulting in the high specificity and affinity of rAb-14G5F6 for ethirimol, with a KD of 5.71 × 10-10 mol/L. Overall, a rAb specific for ethirimol was expressed successfully in this study, laying the groundwork for rAb-based immunoassays for monitoring fungicide residues in agricultural products and the environment.

Preparation and recognition mechanism study of an scFv targeting chloramphenicol for a hybridization chain reaction-CRISPR/Cas12a amplified fluoroimmunoassay

Recombinant antibody-based immunoassays have emerged as crucial techniques for detecting antibiotic residues in food samples. Developing a stable recombinant antibody production system and enhancing detection sensitivity are crucial for their biosensing applications. Here, we bioengineered a single-chain fragment variable (scFv) antibody to target chloramphenicol (CAP) using both Bacillus subtilis and HEK 293 systems, with the HEK 293-derived scFv demonstrating superior sensitivity. Computational chemistry analyses indicated that ASP-99 and ASN-102 residues in the scFv play key roles in antibody recognition, and the hydroxyl group near the benzene ring of the target molecule is critical for in antibody binding. Furthermore, we enhanced the scFv's biosensing sensitivity using an HCR-CRISPR/Cas12a amplification strategy in a streptavidin-based immunoassay. In the dual-step amplification process, detection limits for CAP in the HCR and HCR-CRISPR/Cas12a stages were significantly reduced to 55.23 pg/mL and 3.31 pg/mL, respectively. These findings introduce an effective method for developing CAP-specific scFv antibodies and also propose a multi-amplification strategy to increase immunoassay sensitivity. Additionally, theoretical studies also offer valuable guidance in CAP hapten design and genetic engineering for antibody modification.

Development of a sensitive direct competitive chemiluminescent enzyme immunoassay for gentamicin based on the construction of a specific single-chain variable fragment-alkaline phosphatase fusion protein

A sensitive chemiluminescent enzyme immunoassay (CLEIA) was established for the determination of gentamicin (GEN) residue levels in animal tissue. This assay is based on a fusion protein of single-chain variable fragment (scFv) and alkaline phosphatase (AP). Initially, VL and VH derived from anti-gentamicin monoclonal antibody were linked by a short peptide to construct a scFv. Subsequently, the constructed scFv sequence was accessed into the pLIP6/GN vector, and a soluble scFv-AP fusion protein was generated. The scFv-AP fusion protein was used to develop a direct competitive CLEIA (dcCLEIA) for the determination of gentamicin. In the dcCLEIA, the half inhibitory concentration (IC50) and limit of detection (LOD) were 1.073 ng/mL and 0.380 ng/mL, respectively. The average recoveries of gentamicin spiked in animal tissue samples ranged from 78% to 96%. These results showed a strong correlation with ultra performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). The above results suggest that the anti-GEN scFv-AP fusion protein is suitable for detecting gentamicin residues in edible animal tissues.

Fluorescent aptasensor for the ultrasensitive detection of antibiotic residue in food samples based on dumbbell DNA-mediated signal amplification

Sensitive and reliable detection of antibiotics is of great significance for environmental and food safety due to its high risk in trace concentrations. Herein, we developed a fluorescence sensing system for chloramphenicol (CAP) detection based on dumbbell DNA-mediated signal amplification. Two hairpin dimers (2H1 and 2H2) were employed as the building blocks to construct the sensing scaffolds. The CAP-aptamer binding in another hairpin H0 can liberate the trigger DNA, which then activates the cyclic assembly reaction between 2H1 and 2H2. The separation of FAM and BHQ in the formed product of cascaded DNA ladder yields a high fluorescence signal for CAP monitoring. Compared with the monomer hairpin assembly between H1 and H2, the dimer hairpin assembly between 2H1 and 2H2 exhibits enhanced signal amplification efficiency and reduced reaction time. The developed CAP sensor showed a wide linear range from 10 fM to 10 nM with a detection limit of 2 fM. Importantly, this sensing platform has been successfully applied to the determination of CAP in fish, milk, and water samples with satisfactory recovery and accuracy. With the advantages of high sensitivity, mix-and-read pattern, and robustness, our proposed CAP sensor can be used as a simple and routine tool for the detection of trace amounts of antibiotic residues.

Nanotechnology‐based electrochemical biosensors for monitoring breast cancer biomarkers

Breast cancer is categorized as the most widespread cancer type among women globally. On-time diagnosis can decrease the mortality rate by making the right decision in the therapy procedure. These features lead to a reduction in medication time and socioeconomic burden. The current review article provides a comprehensive assessment for breast cancer diagnosis using nanomaterials and related technologies. Growing use of the nano/biotechnology domain in terms of electrochemical nanobiosensor designing was discussed in detail. In this regard, recent advances in nanomaterial applied for amplified biosensing methodologies were assessed for breast cancer diagnosis by focusing on the advantages and disadvantages of these approaches. We also monitored designing methods, advantages, and the necessity of suitable (nano) materials from a statistical standpoint. The main objective of this review is to classify the applicable biosensors based on breast cancer biomarkers. With numerous nano-sized platforms published for breast cancer diagnosis, this review tried to collect the most suitable methodologies for detecting biomarkers and certain breast cancer cell types.

Self-coordinated nanozyme on Cu3BiS3 nanorods for high-performance aptasensing

A novel strategy is reported to access high-performance nanozymes via the self-coordination of ferrocyanides ([Fe(CN)₆]^4-) onto the surface of the Cu₃BiS₃ (CBS) nanorods. Notably, the in situ formed nanozymes had high catalytic activity, good stability, low cost, and easy mass production. The formed nanozyme catalyzed the oxidation of the typical chromogenic substrate of 3,3',5,5'-tetramethylbenzidine (TMB) with a distinctive absorption peak at 652 nm, accompanied by a blue color development. Moreover, the attachment of deoxyribonucleoside 5'-monophosphates (dNMP) beforehand onto the surface of CBS prevented coordination of ferrocyanides and resulted in the tunable formation of the nanozyme, thereby enabling the construction of an exquisite biosensing platform. Taking the aptasensing of chloramphenicol (CAP) as an example, the engineered nanozyme allowed the construction of a homogenous, label-free, and high-performance bioassay in terms of its convenience and high sensitivity. Under the optimal conditions, changes in the absorption intensity at 652 nm for the oxidized TMB provides a good linear correlation with the logarithm of CAP concentrations in the range 0.1 pM to 100 nM, and the limit of detection was 0.033 pM (calculated from 3σ/s). Considering a vast number of bioreactions can be connected to dNMP production, we expect the engineerable nanozyme as a universal signal transduction scaffold for versatile applications in bioassays. Through the attachment of deoxyribonucleoside 5'-monophosphate (dNMP) on the surface of CBS to regulate the generation of self-coordinated nanozyme CBS/BiHCF, a homogeneous, label-free, and high-performance universal aptasensing platform was constructed.

Single-chain fragment variable produced by phage display technology: Construction, selection, mutation, expression, and recent applications in food safety

Immunoassays are reliable, efficient, and accurate methods for the analysis of small-molecule harmful substances (such as pesticides, veterinary drugs, and biological toxins) that may be present in food. However, traditional polyclonal and monoclonal antibodies are limited by animal hosts and hinder further development of immunoassays. With the gradual application of phage display technology as an efficient in vitro selection technology, the single-chain fragment variable (scFv) now provides an exciting alternative to traditional antibodies. Efficiently constructed scFv source libraries and specifically designed biopanning schemes can now yield scFvs possessing specific recognition capabilities. A rational mutation strategy further enhances the affinity of scFv, and allows it to reach a level that cannot be achieved by immunization. Finally, appropriate prokaryotic expression measures ensure stable and efficient production of scFv. Therefore, when developing excellent scFvs, it is necessary to focus on three key aspects of this process that include screening, mutation, and expression. In this review, we analyze in detail the preparation and affinity improvement process for scFv and provide insights into the research progress and development trend of scFv-based immunoassay methods for monitoring small-molecule harmful substances.

Ultrasensitive antibody production strategy based on hapten property for simultaneous immunoassay

A high-quality antibody production strategy is significant for immunoassay. In this work, four general haptens were proposed based on the 3D structure and surface electrostatic potential of molecular modeling. It was found that the sensitivity and specificity of polyclonal antibodies (pAbs) mainly depended on the bond angle of shapes liked "V" between haptens and proteins and hydrophobic parts of haptens. The quantified process was employed to obtain pAbs against cyhalofop-butyl and its metabolites (CAFs), with the IC₅₀ value of 4.9 μg·L^-1 under optimal conditions. The limit of quantization (LOQ) of the ultrasensitive icELISA in brown rice was 2 μg·kg^-1. The recoveries were 74%-110%, with a coefficient of variation (CV) less than 10%. This study indicated that the hapten property approach led to an improved immunoassay.

The in situ formation of a hole-transporting material on bismuth tungstate for innovative photoelectrochemical aptasensing

We present the in situ formation of a hole-transporting material (bismuth hexacyanoferrate) on the surface of bismuth tungstate aimed at an innovative photoelectrochemical strategy. This approach enabled a competent aptasensing platform for chloramphenicol that was amenable to homogenous, label-free, and split-mode detection.

Recombinant antibodies and their use for food immunoanalysis

Antibodies are widely employed as biorecognition elements for the detection of a plethora of compounds including food and environmental contaminants, biomarkers, or illicit drugs. They are also applied in therapeutics for the treatment of several disorders. Recent recommendations from the EU on animal protection and the replacement of animal-derived antibodies by non-animal-derived ones have raised a great controversy in the scientific community. The application of recombinant antibodies is expected to achieve a high growth rate in the years to come thanks to their versatility and beneficial characteristics in comparison to monoclonal and polyclonal antibodies, such as stability in harsh conditions, small size, relatively low production costs, and batch-to-batch reproducibility. This review describes the characteristics, advantages, and disadvantages of recombinant antibodies including antigen-binding fragments (Fab), single-chain fragment variable (scFv), and single-domain antibodies (V_HH) and their application in food analysis with especial emphasis on the analysis of biotoxins, antibiotics, pesticides, and foodborne pathogens. Although the wide application of recombinant antibodies has been hampered by a number of challenges, this review demonstrates their potential for the sensitive, selective, and rapid detection of food contaminants.

Label free structure-switching fluorescence polarization detection of chloramphenicol with truncated aptamer

In this study, the original chloramphenicol aptamer containing 80 bases was truncated to 30 bases with high affinity by the SYBR Green I assay. It was found that the ionic strength and type affect the recognition of aptamers, especially magnesium ion played a vital role in the binding process. Furthermore, the binding performance of aptamer, including binding mode, key binding sites and conformational changes were further investigated by circular dichroism spectroscopy, UV-vis absorption spectrum and molecular docking. Based on these research data, we inferred that chloramphenicol bound to the minor groove region in the aptamer double helix. Finally, the optimized aptamer LLR10 was used to develop a novel label free fluorescence polarization assay to detect chloramphenicol within SYBR Green I as the source of fluorescence polarization signal. Under optimal conditions, the designed method showed a linear detection range of 0.1-10 nM with a detection limit of 0.06 nM. Additionally, the aptasensor exhibited a high accuracy to the detection of chloramphenicol in milk samples with a recovery rate from 93.7% to 98.4%. Therefore, the developed label free fluorescence polarization aptasensor provides a new idea for the rapid, reliable and sensitive detection of chloramphenicol, which can be applied to food safety control.

Novel label-free fluorescence aptasensor for chloramphenicol detection based on a DNA four-arm junction-assisted signal amplification strategy

A novel label-free fluorescence aptasensor was established for chloramphenicol (CAP) detection by DNA four-arm junction-assisted target recycling and SYBR Green I dye-aided fluorescence-signal amplification. The CAP aptamer was hybridized to its complementary strand (primer) to form a double-stranded primer/aptamer complex. In the presence of CAP, aptamers can specifically bind with CAP to dissociate primers, which can trigger the self-assembly of four hairpins to continuously generate DNA four-arm junctions. After digesting the excess hairpins using T7 exonuclease, SYBR Green I was inserted into the base pair-rich DNA four-arm junctions, which led to a significant increase in fluorescence intensity. Under optimal conditions, the developed aptasensor can detect CAP in a linear range of 1.0 pg mL^-1 to 10 ng mL^-1 with a detection limit of 0.72 pg mL^-1. The recovery rates in milk and honey ranged from 90.3% to 106.6%. Thus, the method shows substantial potential for CAP detection in food products.

Ultrasensitive determination of chloramphenicol in pork and chicken meat samples using a portable electrochemical sensor: effects of 2D nanomaterials on the sensing performance and stability

This work contributes to a deeper understanding of the effects of functional 2D nanomaterials on the electrochemical sensing performance of SPE-based portable sensors for the rapid, accurate, and on-site determination of CAP in food samples.

Application of molecularly imprinted polymers and dual-emission carbon dots hybrid for ratiometric determination of chloramphenicol in milk

Chloramphenicol (CLP) is a veterinary antibiotic that has been banned due to its severe side effects but it is still illegally used in animal husbandry. In this work, the fabrication of simple, fast-response and highly selective ratiometric probe for sensitive visual detection of CLP antibiotic at trace levels in both indoor and outdoor is reported. For the construction of the ratiometric fluorescence probe (mMIP@YBCDs), two kinds of different carbon dots with yellow emission (Y/CDs, 560 nm) and blue emission carbon dots (B/CDs, 440 nm) were used as target sensitive and as reference dyes respectively. Besides, molecularly imprinted mesoporous silica was used as a recognized part of the probe. Upon the addition of different concentrations of CLP, the fluorescence of Y/CDs was quenched significantly while the fluorescence intensity of B/CDs stayed constant which was accompanied by gradual fluorescence color change from yellow-to-blue. The ratiometric probe has a linear response in the range of 0.1-3 μgL^-1 with a detection limit 0.035 μgL^-1. The practicality of the ratiometric method was validated by the quantification of CLP in milk samples.

Generation of functional single-chain fragment variable from hybridoma and development of chemiluminescence enzyme immunoassay for determination of total malachite green in tilapia fish

To determine malachite green (MG) and its major metabolite, leucomalachite green (LMG) residual levels in tilapia fish, chemiluminescent enzyme immunoassay (CLEIA) was developed based on a single-chain variable fragment (scFv)-alkaline phosphatase (AP) fusion protein. At first, V_H and V_L gene sequences were cloned from hybridoma cell lines secreting monoclonal antibody against LMG, and then thoroughly by database-assisted sequence analysis. Finally, the productive V_H and V_L were assembled to an intact scFv sequence and engineered to produce scFv-AP fusion protein. The fusion protein was further identified as a bifunctional reagent for immunoassay, then a sensitive one-step CLEIA against LMG was developed with a half-maximal inhibitory concentration (IC₅₀) and limit of detection (LOD) of 1.3 and 0.04 ng/mL, respectively. The validation results of this novel competitive CLEIA was in line with those obtained by classical HPLC method for determination of total MG in spiked and field incurred samples.

Bimetallic organic framework-based aptamer sensors: a new platform for fluorescence detection of chloramphenicol

A fluorescence method for the quantitative detection of chloramphenicol (CAP) has been developed using phosphate and fluorescent dye 6-carboxy-x-rhodamine (ROX) double-labeled aptamers of CAP and the bimetallic organic framework nanomaterial Cu/UiO-66. Cu/UiO-66 was prepared by coordinate bonding of metal organic framework (MOF) nanomaterial UiO-66 with copper ions. Cu/UiO-66 contains a large number of metal defect sites, which can be combined with phosphate-modified nucleic acid aptamers through strong coordination between phosphate and zirconium to form "fluorescence turn-on" sensors. In the absence of CAP, all single-stranded aptamers were adsorbed on the surface of Cu/UiO-66 through π-π stacking between single-stranded DNA and Cu/UiO-66, which brings the ROX fluorophores and Cu/UiO-66 into close proximity. The ROX fluorescence of aptamers was then quenched by Cu/UiO-66 through photoinduced electron transfer (PET). In the presence of CAP, however, CAP reacted with nucleic acid aptamers to form a special spatial structure, in which the ROX fluorophores were far away from the MOF surface via a change in the spatial structure of the aptamers, and the fluorescence of ROX was able to be recovered. The quantitative detection of CAP can be achieved by measuring the fluorescence signal of ROX using synchronous scanning fluorescence spectrometry. Under optimum conditions, the fluorescence intensities of ROX exhibit a good linear dependence on the concentration of CAP in the range of 0.2-10 nmol/L, with a detection limit of 0.09 nmol/L. The method has advantages of high sensitivity, good selectivity, and a low limit of detection. Graphical abstract.

An enzyme-free fluorometric nanoprobe for chloramphenicol based on signal amplification using graphene oxide sheets

A sensitive and selective method for the determination of the antibiotic chloramphenicol (CAP) is described, which is based on double signal amplification and GO as an efficient fluorescence quencher. The nucleic acid probe is composed of three well-defined regions, viz. the signal probe I, the signal probe II, and the capture probe. The capture probe will bind to CAP specifically and the signal probes produce a significant fluorescence signal. One end of the signal probes is labeled with the fluorophore 6-carboxyfluorescein (FAM). The labeled probes can be adsorbed on graphene oxide (GO) via π-stacking interactions, upon which the green fluorescence of FAM (measured at excitation/emission wavelengths of 490/514 nm) is quenched. On addition of CAP, the aptamer/CAP complexes are formed, and this leads to the restoration of fluorescence due to the removal of the probes from GO. The double signal probes, together with GO as quencher, improve the fluorescence signal significantly and lower the detection limit. Under optimized conditions, the assay works in the 20- to 200-ppb CAP concentration range and has a 0.3-ppb detection limit. It is also successfully applied to the determination of CAP in spiked swine urine samples. The recoveries from spiked swine urine samples are between 97.73 and 108.56%, and the repeatability (expressed as the RSD) is between 4.66 and 8.90%. Graphical abstract The constructed DNA probes form a stable structure and bind to chloramphenicol specifically. One end of signal probes was labeled with the fluorophore 6-carboxyfluorescein (FAM). The detection sensitivity of chloramphenicol was significantly enhanced by using double signal amplification, which was superior to the traditional methods. The quantities of CAP can be achieved by fluorescence increment.

Ultrasensitive label-free electrochemical immunosensor based on PVA-co-PE nanofibrous membrane for the detection of chloramphenicol residues in milk

An ultrasensitive label-free amperometric immunosensor for the detection of chloramphenicol (CAP) residues in milk has been developed by using a screen-printed carbon electrode laminated with a layer of poly (vinyl alcohol-co-ethylene) (PVA-co-PE) nanofibrous membrane that is covalently immobilized with a CAP antibody (anti-CAP). The performance of the PVA-co-PE nanofiber membrane (PVA-co-PE NFM) on the electrode was compared with a PVA-co-PE casted membrane (PVA-co-PE CM), necessary fabrication steps and performance of the sensors were investigated by electrochemical impedance spectroscopy (EIS). The application of the PVA-co-PE NFM decreased the electron-transfer-resistance by about 4 times compared with a conventional PVA-co-PE casted membrane. Under the optimal conditions, the established immunosensor exhibited high sensitivity for determination of CAP in a range 0.01-10 ng mL^-1, with a limit of detection of 0.0047 ng mL^-1. In addition to the good selectivity, reusability and stability over time, the prepared immunosensor was successfully used in the detection of CAP in milk samples without any pretreatment.

Aptamer-mediated colorimetric method for rapid and sensitive detection of chloramphenicol in food

We report an aptamer-mediated colorimetric method for sensitive detection of chloramphenicol (CAP). The aptamer of CAP is immobilized by the hybridization with pre-immobilized capture probe in the microtiter plate. The horseradish peroxidase (HRP) is covalently attached to the aptamer by the biotin-streptavidin system for signal production. CAP will preferably bind with aptamer due to the high binding affinity, which attributes to the release of aptamer and HRP and thus, affects the optical signal intensity. Quantitative determination of CAP is successfully achieved in the wide range from 0.001 to 1000 ng/mL with detection limit of 0.0031 ng/mL, which is more sensitive than traditional immunoassays. This method is further validated by measuring the recovery of CAP spiked in two different food matrices (honey and fish). The aptamer-mediated colorimetric method can be a useful protocol for rapid and sensitive screening of CAP, and may be used as an alternative means for traditional immunoassays.

A Simple and Specific Noncompetitive ELISA Method for HT-2 Toxin Detection

We developed an HT-2 toxin-specific simple ELISA format with a positive read-out. The assay is based on an anti-immune complex (IC) scFv antibody fragment, which is genetically fused with alkaline phosphatase (AP). The anti-IC antibody specifically recognizes the IC between a primary anti-HT-2 toxin Fab fragment and an HT-2 toxin molecule. In the IC ELISA format, the sample is added together with the scFv-AP antibody to the ELISA plate coated with the primary antibody. After 15 min of incubation and a washing step, the ELISA response is read. A competitive ELISA including only the primary antibody recognizes both HT-2 and T-2 toxins. The anti-IC antibody makes the assay specific for HT-2 toxin, and the IC ELISA is over 10 times more sensitive compared to the competitive assay. Three different naturally contaminated matrices: wheat, barley and oats, were used to evaluate the assay performance with real samples. The corresponding limits of detection were 0.3 ng/mL (13 µg/kg), 0.1 ng/mL (4 µg/kg) and 0.3 ng/mL (16 µg/kg), respectively. The IC ELISA can be used for screening HT-2 toxin specifically and in relevant concentration ranges from all three tested grain matrices.