Changes in Nanoscale Chain Assembly in Sweet Potato Starch Lamellae by Downregulation of Biosynthesis Enzymes

Microstructures of Starch Granules with Different Amylose Contents and Allomorphs as Revealed by Scattering Techniques

In this study, as-is (ca. 12% moisture by mass) and hydrated (50% water by mass) granules of waxy potato (WP), waxy wheat (WW), waxy maize, normal maize, and high-amylose maize (HAM) starches were investigated by using small-angle neutron and X-ray scattering (SANS and SAXS), wide-angle X-ray scattering, and ultra-small-angle neutron scattering. The SANS and SAXS data were fitted using the two-phase stacking model of alternating crystalline and amorphous layers. The partial crystalline lamellar structures inside the growth rings of granules were analyzed based on the inter-lamellar distances, thicknesses of the crystalline lamellae and amorphous layers, thickness polydispersities, and water content in each type of layer. Despite having a longer average chain length of amylopectin, the WP and HAM starches, which had B-type allomorph, had a shorter inter-lamellar distance than the other three starches with A-type allomorph. The WP starch had the most uniform crystalline lamellar thickness. After hydration, the amorphous layers were expanded, resulting in an increase of inter-layer distance. The low-angle intensity upturn in SANS and SAXS was attributed to scattering from interfaces/surfaces of larger structures, such as growth rings and macroscopic granule surfaces. Data analysis methods based on model fitting and 1D correlation function were compared. The study emphasized─owing to inherent packing disorder inside granules─that a comprehensive analysis of different parameters was essential in correlating the microstructures with starch properties.

A novel very small granular starch from Chlorella sp. MBFJNU-17

Novel resources of very small granular starch are of great interests to food scientists. We previously found Chlorella sp. MBFJNU-17 contained small granular starch but whether the MBFJNU-17 was a novel resource of very small granular starch remained unresolved. This study isolated and characterized the starch from MBFJNU-17 in comparison with quinoa starch (a typical very small granular starch), and discussed whether the MBFJNU-17 could be a resource of very small granular starch. Results showed that chlorella starch displayed a smaller size (1024 nm) than quinoa starch did (1107 nm), suggesting MBFJNU-17 was a good resource of very small granular starch. Additionally, chlorella starch had less amylose, higher proportion of long amylopectin branches, more ordered structures, thinner amorphous lamellae, better paste thermostability, and slower enzymatic digestion than quinoa starch did. These findings indicated that Chlorella sp. MBFJNU-17 was a novel resource of very small granular starch with desirable thermostability and nutritional attributes.

Editing of the starch branching enzyme gene SBE2 generates high-amylose storage roots in cassava

The production of high-amylose cassava through CRISPR/Cas9-mediated mutagenesis of the starch branching enzyme gene SBE2 was firstly achieved. High-amylose cassava (Manihot esculenta Crantz) is desirable for starch industrial applications and production of healthier processed food for human consumption. In this study, we report the production of high-amylose cassava through CRISPR/Cas9-mediated mutagenesis of the starch branching enzyme 2 (SBE2). Mutations in two targeted exons of SBE2 were identified in all regenerated plants; these mutations, which included nucleotide insertions, and short or long deletions in the SBE2 gene, were classified into eight mutant lines. Three mutants, M6, M7 and M8, with long fragment deletions in the second exon of SBE2 showed no accumulation of SBE2 protein. After harvest from the field, significantly higher amylose (up to 56% in apparent amylose content) and resistant starch (up to 35%) was observed in these mutants compared with the wild type, leading to darker blue coloration of starch granules after quick iodine staining and altered starch viscosity with a higher pasting temperature and peak time. Further ¹H-NMR analysis revealed a significant reduction in the degree of starch branching, together with fewer short chains (degree of polymerization [DP] 15-25) and more long chains (DP>25 and especially DP>40) of amylopectin, which indicates that cassava SBE2 catalyzes short chain formation during amylopectin biosynthesis. Transition from A- to B-type crystallinity was also detected in the starches. Our study showed that CRISPR/Cas9-mediated mutagenesis of starch biosynthetic genes in cassava is an effective approach for generating novel varieties with valuable starch properties for food and industrial applications.

Morphology and Rheology of a Cool-Gel (Protein) Blended with a Thermo-Gel (Hydroxypropyl Methylcellulose)

This study investigates the morphological and rheological properties of blended gelatin (GA; a cooling-induced gel (cool-gel)) and hydroxypropyl methylcellulose (HPMC; a heating-induced gel (thermo-gel)) systems using a fluorescence microscope, small angle X-ray scattering (SAXS), and a rheometer. The results clearly indicate that the two biopolymers are immiscible and have low compatibility. Moreover, the rheological behavior and morphology of the GA/HPMC blends significantly depend on the blending ratio and concentration. Higher polysaccharide contents decrease the gelling temperature and improve the gel viscoelasticity character of GA/HPMC blended gels. The SAXS results reveal that the correlation length (ξ) of the blended gels decreases from 5.16 to 1.89 nm as the HPMC concentration increases from 1 to 6%, which suggests that much denser networks are formed in blended gels with higher HPMC concentrations. Overall, the data reported herein indicate that the gel properties of gelatin can be enhanced by blending with a heating-induced gel.

Engineering Properties of Sweet Potato Starch for Industrial Applications by Biotechnological Techniques including Genome Editing

Sweet potato (Ipomoea batatas) is one of the largest food crops in the world. Due to its abundance of starch, sweet potato is a valuable ingredient in food derivatives, dietary supplements, and industrial raw materials. In addition, due to its ability to adapt to a wide range of harsh climate and soil conditions, sweet potato is a crop that copes well with the environmental stresses caused by climate change. However, due to the complexity of the sweet potato genome and the long breeding cycle, our ability to modify sweet potato starch is limited. In this review, we cover the recent development in sweet potato breeding, understanding of starch properties, and the progress in sweet potato genomics. We describe the applicational values of sweet potato starch in food, industrial products, and biofuel, in addition to the effects of starch properties in different industrial applications. We also explore the possibility of manipulating starch properties through biotechnological means, such as the CRISPR/Cas-based genome editing. The ability to target the genome with precision provides new opportunities for reducing breeding time, increasing yield, and optimizing the starch properties of sweet potatoes.

Plasticized Starch/Agar Composite Films: Processing, Morphology, Structure, Mechanical Properties and Surface Hydrophilicity

Natural biopolymers, which are renewable, widely available, biodegradable, and biocompatible, have attracted huge interest in the development of biocomposite materials. Herein, formulation–property relationships for starch/agar composite films were investigated. First, rapid visco analysis was used to confirm the conditions needed for their gelation and to prepare filmogenic solutions. All the original crystalline and/or lamellar structures of starch and agar were destroyed, and films with cohesive and compact structures were formed, as shown by SEM, XRD, and SAXS. All the plasticized films were predominantly amorphous, and the polymorphs of the composite films were closer to that of the agar-only film. FTIR results suggest that the incorporation of agar restricted starch chain interaction and rearrangement. The addition of agar to starch increased both tensile strength and elongation at break, but the improvements were insignificant after the agar content was over 50 wt.%. Contact angle results indicate that compared with the other samples, the 4:6 (wt./wt.) starch/agar film was less hydrophilic. Thus, this work shows that agar dominates the structure and properties of starch/agar composites, and the best properties can be obtained with a certain starch/agar ratio. Such composite polysaccharide films with tailored mechanical properties and surface hydrophilicity could be useful in biodegradable packaging and biomedical applications (wound dressing and tissue scaffolding).

Starch-protein interplay varies the multi-scale structures of starch undergoing thermal processing

This work concerns how starch-protein interplay affects the multi-scale structures (e.g., short- and long-range orders, nanoscale structure and morphology) of starch undergoing thermal processing (pasting) involving heating and cooling at high water content. An indica rice starch (IRS) and three proteins (whey protein isolate, WPI; soy protein isolate, SPI; casein, CS) were used. By inspecting rheological profiles of mixed systems before and after adding chemicals, IRS-WPI and IRS-CS showed mainly hydrophobic molecular interaction; and IRS-SPI exhibited hydrophobic, hydrogen bonding and electrostatic interactions. The RVA results revealed that, with starch and proteins as controls, starch-globular protein (WPI or SPI) interplay accelerated the swelling of starch granules (faster viscosity increase at initial pasting stage), and reduced the paste stability during heating (higher breakdown) and during cooling (higher setback); however, the starch-casein interactions resulted in opposed effects. Moreover, starch-protein interactions varied the multi-scale chain reassembly of starch into different structures during cooling. Observed could be fewer short- and long-range starch orders, and larger nonperiod structure (or colloidal clusters) on the nanoscale. On even larger scale to micron, IRS-globular protein molecules generated larger grids (with reduced number) in the gel network, and IRS-casein formed a more continuous gel network with less prominent tunnel-like features.

Tailoring Multi-Level Structural and Practical Features of Gelatin Films by Varying Konjac Glucomannan Content and Drying Temperature

Here, we tailored the multi-level structural and practical (mechanical/hydrophilic) features of gelatin films by varying the konjac glucomannan (KGM) content and the film-forming temperatures (25 and 40 °C). The addition of KGM apparently improved the mechanical properties and properly increased the hydrophilicity. With the lower temperature (25 °C), the increase in KGM reduced the gelatin crystallites of films, with detectable KGM–gelatin interactions, nanostructures, and micron-scale cracks. These structural features, with increased KGM and negligibly-occurred derivatizations, caused initially an insignificant decrease and then an increase in the strength, with a generally-increased elongation. The higher temperature (40 °C) could reduce the strength and slightly increase the elongation, related to the reduced crystallites of especially gelatin. With this higher temperature, the increase in KGM concurrently increased the strength and the elongation, mainly associated with the increased KGM and crystallites. Additionally, the increase in KGM made the film more hydrophilic; the multi-scale structural changes of films did not dominantly affect the changing trend of hydrophilicity.

Microstructure and Mechanical/Hydrophilic Features of Agar-Based Films Incorporated with Konjac Glucomannan

Different characterization methods spanning length scales from molecular to micron scale were applied to inspect the microstructures and mechanical/hydrophilic features of agar/konjac glucomannan (KGM) films prepared under different drying temperatures (40 and 60 °C). Note that the lower preparation temperature (40 °C) could increase the strength and elongation of agar/KGM films at high KGM levels (18:82 wt/wt KGM-agar, or higher). This was related to the variations in the film multi-scale structures with the increment of KGM content: the reduced crystallinity, the increased perfection of nanoscale orders at some KGM amounts, and the negligibly-changed morphology and molecular chemical structure under 40 °C preparation temperature. These structural changes initially decreased the film tensile strength, and subsequently increased the film strength and elongation with increasing KGM content. Moreover, under the higher drying temperature (60 °C), the increased KGM content could concurrently reduce the strength and elongation for the films, associated with probable phase separations on nano and smaller scales. In addition, the increased KGM amount tended to make the film more hydrophilic, whereas the changes in the film structures did not dominantly affect the changing trend of hydrophilicity.

Supramolecular and molecular structures of potato starches and their digestion features

This work inspects the supramolecular/molecular structures and digestion rate of potato starches (BEM, C7H, CP2 and CP4) as affected by starch biosynthetic enzymes. Among the starches, CP2 had a lower digestion rate with a higher paste heating stability. Regarding this, predominantly enzyme-sets (i) and (ii) were revealed to produce amylopectin chains. For CP2, the reduced activity ratio of starch-branching enzymes to soluble starch synthases allowed more long amylopectin chains (polymerization degree ≥ 34). Such molecular features tended to increase the crystallites and thicken the lamellae. With similar surface morphology and amylose content, the bulk density of chain packing in CP2 supramolecular structures could be increased. Then, there were an increase in the resistance of starch structures to hydrothermal effects, and a reduction in the enzyme hydrolysis rate. Also, the increased long amylopectin chains played roles in increasing the paste stability during heating with shearing and in reducing the digestion rate.

CRISPR/Cas9-Based Mutagenesis of Starch Biosynthetic Genes in Sweet Potato (Ipomoea Batatas) for the Improvement of Starch Quality

CRISPR/Cas9-mediated genome editing is a powerful technology that has been used for the genetic modification of a number of crop species. In order to evaluate the efficacy of CRISPR/Cas9 technology in the root crop, sweet potato (Ipomoea batatas), two starch biosynthetic pathway genes, IbGBSSI (encoding granule-bound starch synthase I), and IbSBEII (encoding starch branching enzyme II), were targeted in the starch-type cultivar Xushu22 and carotenoid-rich cultivar Taizhong6. I. batatas was transformed using a binary vector, in which the Cas9 gene is driven by the Arabidopsis AtUBQ promoter and the guide RNA is controlled by the Arabidopsis AtU6 promoter. A total of 72 Xushu22 and 35 Taizhong6 transgenic lines were generated and analyzed for mutations. The mutation efficiency was 62-92% with multi-allelic mutations in both cultivars. Most of the mutations were nucleotide substitutions that lead to amino acid changes and, less frequently, stop codons. In addition, short nucleotide insertions or deletions were also found in both IbGBSSI and IbSBEII. Furthermore, a 2658 bp deletion was found in one IbSBEII transgenic line. The total starch contents were not significantly changed in IbGBSSI- and IbSBEII-knockout transgenic lines compared to the wild-type control. However, in the allopolyploid sweet potato, the IbGBSSI-knockout reduced, while the IbSBEII-knockout increased, the amylose percentage. Our results demonstrate that CRISPR/Cas9 technology is an effective tool for the improvement of starch qualities in sweet potato and breeding of polyploid root crops.