Free Energies and Entropies of Binding Sites Identified by MixMD Cosolvent Simulations

Toward Unveiling Putative Binding Sites of Interleukin-33: Insights from Mixed-Solvent Molecular Dynamics Simulations of the Interleukin-1 Family

The interleukin (IL)-1 family is a major proinflammatory cytokine family, ranging from the well-studied IL-1s to the most recently discovered IL-33. As a new focus, IL-33 has attracted extensive research for its crucial immunoregulatory roles, leading to the development of notable monoclonal antibodies as clinical candidates. Efforts to develop small molecules disrupting IL-33/ST2 interaction remain highly desired but encounter challenges due to the shallow and featureless interfaces. The information from relative cytokines has shown that traditional binding site identification methods still struggle in mapping cryptic sites, necessitating dynamic approaches to uncover druggable pockets on IL-33. Here, we employed mixed-solvent molecular dynamics (MixMD) simulations with diverse-property probes to map the hotspots of IL-33 and identify potential binding sites. The protocol was first validated using the known binding sites of two IL-1 family members and then applied to the structure of IL-33. Our simulations revealed several binding sites and proposed side-chain rearrangements essential for the binding of a known inhibitor, aligning well with experimental NMR findings. Further microsecond-time scale simulations of this IL-33-protein complex unveiled distinct binding modes with varying occurrences. These results could facilitate future efforts in developing ligands to target challenging flexible pockets of IL-33 and IL-1 family cytokines in general.

Enhancing SILCS-MC via GPU Acceleration and Ligand Conformational Optimization with Genetic and Parallel Tempering Algorithms

In the domain of computer-aided drug design, achieving precise and accurate estimates of ligand-protein binding is paramount in the context of screening extensive drug libraries and performing ligand optimization. A fundamental aspect of the SILCS (site identification by ligand competitive saturation) methodology lies in the generation of comprehensive 3D free-energy functional group affinity maps (FragMaps), encompassing the entirety of the target molecule structure. These FragMaps offer an intricate landscape of functional group affinities across the protein, bilayer, or RNA, acting as the basis for subsequent SILCS-Monte Carlo (MC) simulations wherein ligands are docked to the target molecule. To augment the efficiency and breadth of ligand sampling capabilities, we implemented an improved SILCS-MC methodology. By harnessing the parallel computing capability of GPUs, our approach facilitates concurrent calculations over multiple ligands and binding sites, markedly enhancing the computational efficiency. Moreover, the integration of a genetic algorithm (GA) with MC allows us to employ an evolutionary approach to perform ligand sampling, assuring enhanced convergence characteristics. In addition, the potential utility of parallel tempering (PT) to improve sampling was investigated. Implementation of SILCS-MC on GPU architecture is shown to accelerate the speed of SILCS-MC calculations by over 2-orders of magnitude. Use of GA and PT yield improvements over Markov-chain MC, increasing the precision of the resultant docked orientations and binding free energies, though the extent of improvements is relatively small. Accordingly, significant improvements in speed are obtained through the GPU implementation with minor improvements in the precision of the docking obtained via the tested GA and PT algorithms.

Identifying Potential Ligand Binding Sites on Glycogen Synthase Kinase 3 Using Atomistic Cosolvent Simulations

Glycogen synthase kinase 3 β (GSK3β) is a serine/threonine kinase that phosphorylates several protein substrates in crucial cell signaling pathways. Owing to its therapeutic importance, there is a need to develop GSK3β inhibitors with high specificity and potency. One approach is to find small molecules that can allosterically bind to the GSK3β protein surface. We have employed fully atomistic mixed-solvent molecular dynamics (MixMD) simulations to identify three plausible allosteric sites on GSK3β that can facilitate the search for allosteric inhibitors. Our MixMD simulations narrow down the allosteric sites to precise regions on the GSK3β surface, thereby improving upon the previous predictions of the locations of these sites.

AAp-MSMD: Amino Acid Preference Mapping on Protein-Protein Interaction Surfaces Using Mixed-Solvent Molecular Dynamics

Peptides have attracted much attention recently owing to their well-balanced properties as drugs against protein-protein interaction (PPI) surfaces. Molecular simulation-based predictions of binding sites and amino acid residues with high affinity to PPI surfaces are expected to accelerate the design of peptide drugs. Mixed-solvent molecular dynamics (MSMD), which adds probe molecules or fragments of functional groups as solutes to the hydration model, detects the binding hotspots and cryptic sites induced by small molecules. The detection results vary depending on the type of probe molecule; thus, they provide important information for drug design. For rational peptide drug design using MSMD, we proposed MSMD with amino acid residue probes, named amino acid probe-based MSMD (AAp-MSMD), to detect hotspots and identify favorable amino acid types on protein surfaces to which peptide drugs bind. We assessed our method in terms of hotspot detection at the amino acid probe level and binding free energy prediction with amino acid probes at the PPI site for the complex structure that formed the PPI. In hotspot detection, the max-spatial probability distribution map (max-PMAP) obtained from AAp-MSMD detected the PPI site, to which each type of amino acid can bind favorably. In the binding free energy prediction using amino acid probes, ΔGFE obtained from AAp-MSMD roughly estimated the experimental binding affinities from the structure-activity relationship. AAp-MSMD, with amino acid probes, provides estimated binding sites and favorable amino acid types at the PPI site of a target protein.

Concentration-Dependent Thermodynamic Analysis of the Partition Process of Small Ligands into Proteins

In the category of functional low-affinity interactions, small ligands may interact with multiple protein sites in a highly degenerate manner. Better conceived as a partition phenomenon at the molecular interface of proteins, such low-affinity interactions appear to be hidden to our current experimental resolution making their structural and functional characterization difficult in the low concentration regime of physiological processes. Characterization of the partition phenomenon under higher chemical forces could be a relevant strategy to tackle the problem provided the results can be scaled back to the low concentration range. Far from being trivial, such scaling demands a concentration-dependent understanding of self-interactions of the ligands, structural perturbations of the protein, among other molecular effects. Accordingly, we elaborate a novel and detailed concentration-dependent thermodynamic analysis of the partition process of small ligands aiming at characterizing the stability and structure of the dilute phenomenon from high concentrations. In analogy to an “aggregate” binding constant of a small molecule over multiple sites of a protein receptor, the model defines the stability of the process as a macroscopic equilibrium constant for the partition number of ligands that can be used to analyze biochemical and functional data of two-component systems driven by low-affinity interactions. Acquisition of such modeling-based structural information is expected to be highly welcome by revealing more traceable protein-binding spots for non-specific ligands.

Mapping the binding sites of challenging drug targets

An increasing number of medically important proteins are challenging drug targets because their binding sites are too shallow or too polar, are cryptic and thus not detectable without a bound ligand or located in a protein-protein interface. While such proteins may not bind druglike small molecules with sufficiently high affinity, they are frequently druggable using novel therapeutic modalities. The need for such modalities can be determined by experimental or computational fragment based methods. Computational mapping by mixed solvent molecular dynamics simulations or the FTMap server can be used to determine binding hot spots. The strength and location of the hot spots provide very useful information for selecting potentially successful approaches to drug discovery.

Cosolvent Simulations with Fragment-Bound Proteins Identify Hot Spots to Direct Lead Growth

In drug design, chemical groups are sequentially added to improve a weak-binding fragment into a tight-binding lead molecule. Often, the direction to make these additions is unclear, and there are numerous chemical modifications to choose. Lead development can be guided by crystal structures of the fragment-bound protein, but this alone is unable to capture structural changes like closing or opening of the binding site and any side-chain movements. Accounting for adaptation of the site requires a dynamic approach. Here, we use molecular dynamics calculations of small organic solvents with protein-fragment pairs to reveal the nearest "hot spots". These close hot spots show the direction to make appropriate additions and suggest types of chemical modifications that could improve binding affinity. Mixed-solvent molecular dynamics (MixMD) is a cosolvent simulation technique that is well established for finding binding "hot spots" in active sites and allosteric sites of proteins. We simulated 20 fragment-bound and apo forms of key pharmaceutical targets to map out hot spots for potential lead space. Furthermore, we analyzed whether the presence of a fragment facilitates the probes' binding in the lead space, a type of binding cooperativity. To the best of our knowledge, this is the first use of cosolvent MD conducted with bound inhibitors in the simulation. Our work provides a general framework to extract molecular features of binding sites to choose chemical groups for growing lead molecules. Of the 20 systems, 17 systems were well mapped by MixMD. For the three not-mapped systems, two had lead growth out into solution away from the protein, and the third had very small modifications which indicated no nearby hot spots. Therefore, our lack of mapping in three systems was appropriate given the experimental data (true-negative cases). The simulations are run for very short time scales, making this method tractable for use in the pharmaceutical industry.

Inverse Mixed-Solvent Molecular Dynamics for Visualization of the Residue Interaction Profile of Molecular Probes

To ensure efficiency in discovery and development, the application of computational technology is essential. Although virtual screening techniques are widely applied in the early stages of drug discovery research, the computational methods used in lead optimization to improve activity and reduce the toxicity of compounds are still evolving. In this study, we propose a method to construct the residue interaction profile of the chemical structure used in the lead optimization by performing “inverse” mixed-solvent molecular dynamics (MSMD) simulation. Contrary to constructing a protein-based, atom interaction profile, we constructed a probe-based, protein residue interaction profile using MSMD trajectories. It provides us the profile of the preferred protein environments of probes without co-crystallized structures. We assessed the method using three probes: benzamidine, catechol, and benzene. As a result, the residue interaction profile of each probe obtained by MSMD was a reasonable physicochemical description of the general non-covalent interaction. Moreover, comparison with the X-ray structure containing each probe as a ligand shows that the map of the interaction profile matches the arrangement of amino acid residues in the X-ray structure.

Computational Identification of Possible Allosteric Sites and Modulators of the SARS-CoV-2 Main Protease

In this study, we target the main protease (M^pro) of the SARS-CoV-2 virus as it is a crucial enzyme for viral replication. Herein, we report three plausible allosteric sites on M^pro that can expand structure-based drug discovery efforts for new M^pro inhibitors. To find these sites, we used mixed-solvent molecular dynamics (MixMD) simulations, an efficient computational protocol that finds binding hotspots through mapping the surface of unbound proteins with 5% cosolvents in water. We have used normal mode analysis to support our claim of allosteric control for these sites. Further, we have performed virtual screening against the sites with 361 hits from M^pro screenings available through the National Center for Advancing Translational Sciences (NCATS). We have identified the NCATS inhibitors that bind to the remote sites better than the active site of M^pro, and we propose these molecules may be allosteric regulators of the system. After identifying our sites, new X-ray crystal structures were released that show fragment molecules in the sites we found, supporting the notion that these sites are accurate and druggable.

Application of Site-Identification by Ligand Competitive Saturation in Computer-Aided Drug Design

Site Identification by Ligand Competitive Saturation (SILCS) is a molecular simulation approach that uses diverse small solutes in aqueous solution to obtain functional group affinity patterns of a protein or other macromolecule. This involves employing a combined Grand Canonical Monte Carlo (GCMC)-molecular dynamics (MD) method to sample the full 3D space of the protein, including deep binding pockets and interior cavities from which functional group free energy maps (FragMaps) are obtained. The information content in the maps, which include contributions from protein flexibilty and both protein and functional group desolvation contributions, can be used in many aspects of the drug discovery process. These include identification of novel ligand binding pockets, including allosteric sites, pharmacophore modeling, prediction of relative protein-ligand binding affinities for database screening and lead optimization efforts, evaluation of protein-protein interactions as well as in the formulation of biologics-based drugs including monoclonal antibodies. The present article summarizes the various tools developed in the context of the SILCS methodology and their utility in computer-aided drug design (CADD) applications, showing how the SILCS toolset can improve the drug-development process on a number of fronts with respect to both accuracy and throughput representing a new avenue of CADD applications.

EXPRORER: Rational Cosolvent Set Construction Method for Cosolvent Molecular Dynamics Using Large-Scale Computation

Cosolvent molecular dynamics (CMD) simulations involve an MD simulation of a protein in the presence of explicit water molecules mixed with cosolvent molecules to perform hotspot detection, binding site identification, and binding energy estimation, while other existing methods (e.g., MixMD, SILCS, and MDmix) utilize small molecules that represent functional groups of compounds. However, the cosolvent selections employed in these methods differ and there are only a few cosolvents that are commonly used in these methods. In this study, we proposed a systematic method for constructing a set of cosolvents for drug discovery, termed the EXtended PRObes set construction by REpresentative Retrieval (EXPRORER). First, we extracted typical substructures from FDA-approved drugs, generated 138 cosolvent structures, and for each cosolvent molecule, we conducted CMD simulations to generate a spatial probability distribution map of cosolvent atoms (PMAP). Analyses of PMAP similarity revealed that a cosolvent pair with a PMAP similarity greater than 0.70-0.75 shared similar structural features. We present a method for the construction of a cosolvent subset that satisfies a similarity threshold for all cosolvents, and we tested the constructed sets for four proteins. To our knowledge, this is the first study to include a systematic proposal for cosolvent set construction, and thus, the EXPRORER cosolvents will provide deeper insights into ligand binding sites of various proteins.

Network-Based Target Prioritization and Drug Candidate Identification for Multiple Sclerosis: From Analyzing "Omics Data" to Druggability Simulations

Multiple sclerosis (MS) is the most common chronic inflammatory demyelinating disease of the central nervous system. While the drugs currently available for MS provide symptomatic benefit, there is no curative treatment. The emergence of large-scale multiomics data and network theory provide new opportunities for drug discovery in MS, as these are promising strategies for developing novel drugs. In this study, we proposed a computational framework that combined biomolecular network modeling and structural dynamics analysis to facilitate the discovery of new drugs with potential activity in MS. First, we developed a new shortest path-based algorithm that prioritized differentially expressed genes using a newly topological and functional exploration of protein-protein interaction network. Then, pathway enrichment analysis and an assessment of target druggability suggested that TNF-α-induced protein 3 (TNFAIP3), which is involved in NF-κ B signaling, could be a potential therapeutic target for MS. Finally, druggability simulations and mutation enrichment analysis of the TNFAIP3 dimer presented two druggable sites. Follow-up pharmacophore model-based virtual screening of the two sites yielded 30 hit compounds with low energy scores. In summary, this novel method based on analyzing "omics data" and performing druggability simulations, is a systematic approach that unravels disease mechanisms and links them to the chemical space to develop treatments and can be applied to other complex diseases.

Analyzing In Silico the Relationship Between the Activation of the Edema Factor and Its Interaction With Calmodulin

Molecular dynamics (MD) simulations have been recorded on the complex between the edema factor (EF) of Bacilllus anthracis and calmodulin (CaM), starting from a structure with the orthosteric inhibitor adefovir bound in the EF catalytic site. The starting structure has been destabilized by alternately suppressing different co-factors, such as adefovir ligand or ions, revealing several long-distance correlations between the conformation of CaM, the geometry of the CaM/EF interface, the enzymatic site and the overall organization of the complex. An allosteric communication between CaM/EF interface and the EF catalytic site, highlighted by these correlations, was confirmed by several bioinformatics approaches from the literature. A network of hydrogen bonds and stacking interactions extending from the helix V of of CaM, and the residues of the switches A, B and C, and connecting to catalytic site residues, is a plausible candidate for the mediation of allosteric communication. The greatest variability in volume between the different MD conditions was also found for cavities present at the EF/CaM interface and in the EF catalytic site. The similarity between the predictions from literature and the volume variability might introduce the volume variability as new descriptor of allostery.

Estimation of the ligand-binding free energy of checkpoint kinase 1 via non-equilibrium MD simulations

Checkpoint kinase 1 (CHK1) is a serine/threonine-protein kinase that is involved in cell cycle regulation in eukaryotes. Inhibition of CHK1 is thus considered as a promising approach in cancer therapy. In this study, the fast pulling of ligand (FPL) process was applied to predict the relative binding affinities of CHK1 inhibitors using non-equilibrium molecular dynamics (MD) simulations. The work of external harmonic forces to pull the ligand out of the binding cavity strongly correlated with the experimental binding affinity of CHK1 inhibitors with the correlation coefficient of R = -0.88 and an overall root mean square error (RMSE) of 0.99 kcal/mol. The data indicate that the FPL method is highly accurate in predicting the relative binding free energies of CHK1 inhibitors with an affordable CPU time. A new set of molecules were designed based on the molecular modeling of interactions between the known inhibitor and CHK1 as inhibitory candidates. Molecular docking and FPL results exhibited that the binding affinities of developed ligands were similar to the known inhibitor in interaction with the catalytic site of CHK1, producing very potential CHK1 inhibitors of that the inhibitory activities should be further evaluated in vitro.

Impact of electronic polarizability on protein-functional group interactions

Interactions of proteins with functional groups are key to their biological functions, making it essential that they be accurately modeled. To investigate the impact of the inclusion of explicit treatment of electronic polarizability in force fields on protein-functional group interactions, the additive CHARMM and Drude polarizable force field are compared in the context of the Site-Identification by Ligand Competitive Saturation (SILCS) simulation methodology from which functional group interaction patterns with five proteins for which experimental binding affinities of multiple ligands are available, were obtained. The explicit treatment of polarizability produces significant differences in the functional group interactions in the ligand binding sites including overall enhanced binding of functional groups to the proteins. This is associated with variations of the dipole moments of solutes representative of functional groups in the binding sites relative to aqueous solution with higher dipole moments systematically occurring in the latter, though exceptions occur with positively charged methylammonium. Such variation indicates the complex, heterogeneous nature of the electronic environments of ligand binding sites and emphasizes the inherent limitation of fixed charged, additive force fields for modeling ligand-protein interactions. These effects yield more defined orientation of the functional groups in the binding pockets and a small, but systematic improvement in the ability of the SILCS method to predict the binding orientation and relative affinities of ligands to their target proteins. Overall, these results indicate that the physical model associated with the explicit treatment of polarizability along with the presence of lone pairs in a force field leads to changes in the nature of the interactions of functional groups with proteins versus that occurring with additive force fields, suggesting the utility of polarizable force fields in obtaining a more realistic understanding of protein-ligand interactions.

Investigating Cryptic Binding Sites by Molecular Dynamics Simulations

This Account highlights recent advances and discusses major challenges in investigations of cryptic (hidden) binding sites by molecular simulations. Cryptic binding sites are not visible in protein targets crystallized without a ligand and only become visible crystallographically upon binding events. These sites have been shown to be druggable and might provide a rare opportunity to target difficult proteins. However, due to their hidden nature, they are difficult to find through experimental screening. Computational methods based on atomistic molecular simulations remain one of the best approaches to identify and characterize cryptic binding sites. However, not all methods are equally efficient. Some are more apt at quickly probing protein dynamics but do not provide thermodynamic or druggability information, while others that are able to provide such data are demanding in terms of time and resources. Here, we review the recent contributions of mixed-solvent simulations, metadynamics, Markov state models, and other enhanced sampling methods to the field of cryptic site identification and characterization. We discuss how these methods were able to provide precious information on the nature of the site opening mechanisms, to predict previously unknown sites which were used to design new ligands, and to compute the free energy landscapes and kinetics associated with the opening of the sites and the binding of the ligands. We highlight the potential and the importance of such predictions in drug discovery, especially for difficult ("undruggable") targets. We also discuss the major challenges in the field and their possible solutions.

Allosteric Binding Sites On Nuclear Receptors: Focus On Drug Efficacy and Selectivity

Nuclear receptors (NRs) are highly relevant drug targets in major indications such as oncologic, metabolic, reproductive, and immunologic diseases. However, currently, marketed drugs designed towards the orthosteric binding site of NRs often suffer from resistance mechanisms and poor selectivity. The identification of two superficial allosteric sites, activation function-2 (AF-2) and binding function-3 (BF-3), as novel drug targets sparked the development of inhibitors, while selectivity concerns due to a high conservation degree remained. To determine important pharmacophores and hydration sites among AF-2 and BF-3 of eight hormonal NRs, we systematically analyzed over 10 μ s of molecular dynamics simulations including simulations in explicit water and solvent mixtures. In addition, a library of over 300 allosteric inhibitors was evaluated by molecular docking. Based on our results, we suggest the BF-3 site to offer a higher potential for drug selectivity as opposed to the AF-2 site that is more conserved among the selected receptors. Detected similarities among the AF-2 sites of various NRs urge for a broader selectivity assessment in future studies. In combination with the Supplementary Material, this work provides a foundation to improve both selectivity and potency of allosteric inhibitors in a rational manner and increase the therapeutic applicability of this promising compound class.

Essential site scanning analysis: A new approach for detecting sites that modulate the dispersion of protein global motions

Despite the wealth of methods developed for exploring the molecular basis of allostery in biomolecular systems, there is still a need for structure-based predictive tools that can efficiently detect susceptible sites for triggering allosteric responses. Toward this goal, we introduce here an elastic network model (ENM)-based method, Essential Site Scanning Analysis (ESSA). Essential sites are here defined as residues that would significantly alter the protein's global dynamics if bound to a ligand. To mimic the crowding induced upon substrate binding, the heavy atoms of each residue are incorporated as additional network nodes into the α-carbon-based ENM, and the resulting shifts in soft mode frequencies are used as a metric for evaluating the essentiality of each residue. Results on a dataset of monomeric proteins indicate the enrichment of allosteric and orthosteric binding sites, as well as global hinge regions among essential residues, highlighting the significant role of these sites in controlling the overall structural dynamics. Further integration of ESSA with information on predicted pockets and their local hydrophobicity density enables successful predictions of allosteric pockets for both ligand-bound and -unbound structures. ESSA can be efficiently applied to large multimeric systems. Three case studies, namely (i) G-protein binding to a GPCR, (ii) heterotrimeric assembly of the Ser/Thr protein phosphatase PP2A, and (iii) allo-targeting of AMPA receptor, demonstrate the utility of ESSA for identifying essential sites and narrowing down target allosteric sites identified by druggability simulations.

Pharmmaker: Pharmacophore modeling and hit identification based on druggability simulations

Recent years have seen progress in druggability simulations, that is, molecular dynamics simulations of target proteins in solutions containing drug‐like probe molecules to characterize their drug‐binding abilities, if any. An important consecutive step is to analyze the trajectories to construct pharmacophore models (PMs) to use for virtual screening of libraries of small molecules. While considerable success has been observed in this type of computer‐aided drug discovery, a systematic tool encompassing multiple steps from druggability simulations to pharmacophore modeling, to identifying hits by virtual screening of libraries of compounds, has been lacking. We address this need here by developing a new tool, Pharmmaker, building on the DruGUI module of our ProDy application programming interface. Pharmmaker is composed of a suite of steps: (Step 1) identification of high affinity residues for each probe molecule type; (Step 2) selecting high affinity residues and hot spots in the vicinity of sites identified by DruGUI; (Step 3) ranking of the interactions between high affinity residues and specific probes; (Step 4) obtaining probe binding poses and corresponding protein conformations by collecting top‐ranked snapshots; and (Step 5) using those snapshots for constructing PMs. The PMs are then used as filters for identifying hits in structure‐based virtual screening. Pharmmaker, accessible online at http://prody.csb.pitt.edu/pharmmaker/, can be used in conjunction with other tools available in ProDy.