Energy-Screened Many-Body Expansion: A Practical Yet Accurate Fragmentation Method for Quantum Chemistry

The Near-Sightedness of Many-Body Interactions in Anharmonic Vibrational Couplings

Couplings between vibrational motions are driven by electronic interactions, and these couplings carry special significance in vibrational energy transfer, multidimensional spectroscopy experiments, and simulations of vibrational spectra. In this investigation, the many-body contributions to these couplings are analyzed computationally in the context of clathrate-like alkali metal cation hydrates, including Cs+(H2O)20, Rb+(H2O)20, and K+(H2O)20, using both analytic and quantum-chemistry potential energy surfaces. Although the harmonic spectra and one-dimensional anharmonic spectra depend strongly on these many-body interactions, the mode-pair couplings were, perhaps surprisingly, found to be dominated by one-body effects, even in cases of couplings to low-frequency modes that involved the motion of multiple water molecules. The origin of this effect was traced mainly to geometric distortion within water monomers and cancellation of many-body effects in differential couplings, and the effect was also shown to be agnostic to the identity of the ion. These outcomes provide new understanding of vibrational couplings and suggest the possibility of improved computational methods for the simulation of infrared and Raman spectra.

Analysis of two overlapping fragmentation approaches in density matrix construction: GMBE-DM vs. ADMA

In this study, we conduct a comparative analysis of two density matrix construction methods: the generalized many-body expansion for building density matrices (GMBE-DM) based on the set-theoretical principle of inclusion/exclusion and the adjustable density matrix assembler (ADMA) based on the Mulliken-Mezey ansatz. We apply these methods to various noncovalent clusters, including water clusters, ion-water clusters, and ion-pair clusters, using both small 6-31G(d) and large def2-TZVPPD basis sets. Our findings reveal that the GMBE-DM method, particularly when combined with the purification scheme and truncation at the one-body level [GMBE(1)-DM-P], exhibits superior performance across all test systems and basis sets. In contrast, all ADMA set of methods show reasonable results only with small and compact basis sets. For example, GMBE(1)-DM-P outperforms the best ADMA method by at least 4 and 16 times with small and large basis sets, respectively, in the case of (H2O)N=6-55. This highlights the significance of the basis set choice for ADMA, which is even more critical than the fragmentation scheme, such as the size of subsystems, while GMBE-DM consistently produces accurate results irrespective of the chosen basis set. Consequently, the efficient and robust GMBE(1)-DM-P approach is recommended as a fragmentation method for generating accurate absolute and relative energies across different binding patterns and basis sets for noncovalent clusters.

Reformulation of All ONIOM-Type Molecular Fragmentation Approaches and Many-Body Theories Using Graph-Theory-Based Projection Operators: Applications to Dynamics, Molecular Potential Surfaces, Machine Learning, and Quantum Computing

We present a graph-theory-based reformulation of all ONIOM-based molecular fragmentation methods. We discuss applications to (a) accurate post-Hartree-Fock AIMD that can be conducted at DFT cost for medium-sized systems, (b) hybrid DFT condensed-phase studies at the cost of pure density functionals, (c) reduced cost on-the-fly large basis gas-phase AIMD and condensed-phase studies, (d) post-Hartree-Fock-level potential surfaces at DFT cost to obtain quantum nuclear effects, and (e) novel transfer machine learning protocols derived from these measures. Additionally, in previous work, the unifying strategy discussed here has been used to construct new quantum computing algorithms. Thus, we conclude that this reformulation is robust and accurate.

Multimer Embedding Approach for Molecular Crystals up to Harmonic Vibrational Properties

Accurate calculations of molecular crystals are crucial for drug design and crystal engineering. However, periodic high-level density functional calculations using hybrid functionals are often prohibitively expensive for the relevant systems. These expensive periodic calculations can be circumvented by the usage of embedding methods in which, for instance, the periodic calculation is only performed at a lower-cost level and then monomer energies and dimer interactions are replaced by those of the higher-level method. Herein, we extend such a multimer embedding approach to enable energy corrections for trimer interactions and the calculation of harmonic vibrational properties up to the dimer level. We evaluate this approach for the X23 benchmark set of molecular crystals by approximating a periodic hybrid density functional (PBE0+MBD) by embedding multimers into less expensive calculations using a generalized-gradient approximation functional (PBE+MBD). We show that trimer interactions are crucial for accurately approximating lattice energies within 1 kJ/mol and might also be needed for further improvement of lattice constants and hence cell volumes. Finally, the vibrational properties are already very well captured at the monomer and dimer level, making it possible to approximate vibrational free energies at room temperature within 1 kJ/mol.

Capturing Weak Interactions in Surface Adsorbate Systems at Coupled Cluster Accuracy: A Graph-Theoretic Molecular Fragmentation Approach Improved through Machine Learning

The accurate and efficient study of the interactions of organic matter with the surface of water is critical to a wide range of applications. For example, environmental studies have found that acidic polyfluorinated alkyl substances, especially perfluorooctanoic acid (PFOA), have spread throughout the environment and bioaccumulate into human populations residing near contaminated watersheds, leading to many systemic maladies. Thus, the study of the interactions of PFOA with water surfaces became important for the mitigation of their activity as pollutants and threats to public health. However, theoretical study of the interactions of such organic adsorbates on the surface of water, and their bulk concerted properties, often necessitates the use of ab initio methods to properly incorporate the long-range electronic properties that govern these extended systems. Notable theoretical treatments of "on-water" reactions thus far have employed hybrid DFT and semilocal DFT, but the interactions involved are weak interactions that may be best described using post-Hartree-Fock theory. Here, we aim to demonstrate the utility of a graph-theoretic approach to molecular fragmentation that accurately captures the critical "weak" interactions while maintaining an efficient ab initio treatment of the long-range periodic interactions that underpin the physics of extended systems. We apply this graph-theoretical treatment to study PFOA on the surface of water as a model system for the study of weak interactions seen in the wide range of surface interactions and reactions. The approach divides a system into a set of vertices, that are then connected through edges, faces, and higher order graph theoretic objects known as simplexes, to represent a collection of locally interacting subsystems. These subsystems are then used to construct ab initio molecular dynamics simulations and for computing multidimensional potential energy surfaces. To further improve the computational efficiency of our graph theoretic fragmentation method, we use a recently developed transfer learning protocol to construct the full system potential energy from a family of neural networks each designed to accurately model the behavior of individual simplexes. We use a unique multidimensional clustering algorithm, based on the k-means clustering methodology, to define our training space for each separate simplex. These models are used to extrapolate the energies for molecular dynamics trajectories at PFOA water interfaces, at less than one-tenth the cost as compared to a regular molecular fragmentation-based dynamics calculation with excellent agreement with couple cluster level of full system potential energies.

Site-Specific Ionization Potentials and Electron Affinities in Large Molecular Systems at Coupled Cluster Level

A many-body expansion of ionization potentials and electron affinities is developed based on a combination of the fragment molecular orbital method and equation-of-motion coupled-cluster (EOM-CC). In addition to site-specific values, obtained as one-body properties, pair and triple corrections are added to account for nonlocal EOM-CC contributions of the molecular environment of a chromophore. The developed method is applied to carboxylic acids, alkyl cations, a protein ubiquitin (Protein Data Bank ID 1UBQ), and a nano ribbon of white graphene elucidating the effect of environment on ionization potential and electron affinity.

Scalable generalized screening for high-order terms in the many-body expansion: Algorithm, open-source implementation, and demonstration

The many-body expansion lies at the heart of numerous fragment-based methods that are intended to sidestep the nonlinear scaling of ab initio quantum chemistry, making electronic structure calculations feasible in large systems. In principle, inclusion of higher-order n-body terms ought to improve the accuracy in a controllable way, but unfavorable combinatorics often defeats this in practice and applications with n ≥ 4 are rare. Here, we outline an algorithm to overcome this combinatorial bottleneck, based on a bottom-up approach to energy-based screening. This is implemented within a new open-source software application ("Fragme∩t"), which is integrated with a lightweight semi-empirical method that is used to cull subsystems, attenuating the combinatorial growth of higher-order terms in the graph that is used to manage the calculations. This facilitates applications of unprecedented size, and we report four-body calculations in (H2O)64 clusters that afford relative energies within 0.1 kcal/mol/monomer of the supersystem result using less than 10% of the unique subsystems. We also report n-body calculations in (H2O)20 clusters up to n = 8, at which point the expansion terminates naturally due to screening. These are the largest n-body calculations reported to date using ab initio electronic structure theory, and they confirm that high-order n-body terms are mostly artifacts of basis-set superposition error.

A simple and consistent quantum-chemical fragmentation scheme for proteins that includes two-body contributions

The Molecular Fractionation with Conjugate Caps (MFCC) method is a popular fragmentation method for the quantum-chemical treatment of proteins. However, it does not account for interactions between the amino acid fragments, such as intramolecular hydrogen bonding. Here, we present a combination of the MFCC fragmentation scheme with a second-order many-body expansion (MBE) that consistently accounts for all fragment-fragment, fragment-cap, and cap-cap interactions, while retaining the overall simplicity of the MFCC scheme with its chemically meaningful fragments. We show that with the resulting MFCC-MBE(2) scheme, the errors in the total energies of selected polypeptides and proteins can be reduced by up to one order of magnitude and relative energies of different protein conformers can be predicted accurately.

Fragment-Based Calculations of Enzymatic Thermochemistry Require Dielectric Boundary Conditions

Electronic structure calculations on enzymes require hundreds of atoms to obtain converged results, but fragment-based approximations offer a cost-effective solution. We present calculations on enzyme models containing 500-600 atoms using the many-body expansion, comparing to benchmarks in which the entire enzyme-substrate complex is described at the same level of density functional theory. When the amino acid fragments contain ionic side chains, the many-body expansion oscillates under vacuum boundary conditions but rapid convergence is restored using low-dielectric boundary conditions. This implies that full-system calculations in the gas phase are inappropriate benchmarks for assessing errors in fragment-based approximations. A three-body protocol retains sub-kilocalorie per mole fidelity with respect to a supersystem calculation, as does a two-body calculation combined with a full-system correction at a low-cost level of theory. These protocols pave the way for application of high-level quantum chemistry to large systems via rigorous, ab initio treatment of many-body polarization.

Many-Body Effects in Aqueous Systems: Synergies Between Interaction Analysis Techniques and Force Field Development

Interaction analysis techniques, including the many-body expansion (MBE), symmetry-adapted perturbation theory, and energy decomposition analysis, allow for an intuitive understanding of complex molecular interactions. We review these methods by first providing a historical context for the study of many-body interactions and discussing how nonadditivities emerge from Hamiltonians containing strictly pairwise-additive interactions. We then elaborate on the synergy between these interaction analysis techniques and the development of advanced force fields aimed at accurately reproducing the Born-Oppenheimer potential energy surface. In particular, we focus on ab initio-based force fields that aim to explicitly reproduce many-body terms and are fitted to high-level electronic structure results. These force fields generally incorporate many-body effects through (a) parameterization of distributed multipoles, (b) explicit fitting of the MBE, (c) inclusion of many-atom features in a neural network, and (d) coarse-graining of many-body terms into an effective two-body term. We also discuss the emerging use of the MBE to improve the accuracy and speed of ab initio molecular dynamics.

Analytic Gradient for Time-Dependent Density Functional Theory Combined with the Fragment Molecular Orbital Method

The analytic energy gradient of energy with respect to nuclear coordinates is derived for the fragment molecular orbital (FMO) method combined with time-dependent density functional theory (TDDFT). The response terms arising from the use of a polarizable embedding are derived. The obtained analytic FMO-TDDFT gradient is shown to be accurate in comparison to both numerical FMO-TDDFT and unfragmented TDDFT gradients, at the level of two- and three-body expansions. The gradients are used for geometry optimizations, molecular dynamics, vibrational calculations, and simulations of IR and Raman spectra of excited states. The developed method is used to optimize the geometry of the ground and excited electronic states of the photoactive yellow protein (PDB: 2PHY).

Development and testing of an algorithm for efficient MP2/CCSD(T) energy estimation of molecular clusters with the 2-body approach

This work reports the development and testing of an automated algorithm for estimating the energies of weakly bound molecular clusters employing correlated theory. Firstly, the monomers and dimers of (homo/hetero) clusters are identified, and the sum of one-body and two-body contributions to correlation energy is calculated. The addition of this contribution to the Hartree-Fock full calculation (FC) energies provides a good estimate of the total energies at Møller-Plesset second-order perturbation theory (MP2)/coupled-cluster method with singles and doubles (CCSD) (T)-level theory using augmented Dunning basis sets. The estimated energies for several test clusters show an excellent agreement with their FC counterparts, with a substantial wall-clock time saving employing off-the-shelf hardware. Furthermore, the complete basis set (CBS) limit for MP2 energy computed using the two-body approach also agrees with its CBS energy with its FC counterpart.

Parametrized quantum-mechanical approaches combined with the fragment molecular orbital method

Fast parameterized methods such as density-functional tight-binding (DFTB) facilitate realistic calculations of large molecular systems, which can be accelerated by the fragment molecular orbital (FMO) method. Fragmentation facilitates interaction analyses between functional parts of molecular systems. In addition to DFTB, other parameterized methods combined with FMO are also described. Applications of FMO methods to biochemical and inorganic systems are reviewed.

Graph Theoretic Molecular Fragmentation for Multidimensional Potential Energy Surfaces Yield an Adaptive and General Transfer Machine Learning Protocol

Over a series of publications we have introduced a graph-theoretic description for molecular fragmentation. Here, a system is divided into a set of nodes, or vertices, that are then connected through edges, faces, and higher-order simplexes to represent a collection of spatially overlapping and locally interacting subsystems. Each such subsystem is treated at two levels of electronic structure theory, and the result is used to construct many-body expansions that are then embedded within an ONIOM-scheme. These expansions converge rapidly with many-body order (or graphical rank) of subsystems and have been previously used for ab initio molecular dynamics (AIMD) calculations and for computing multidimensional potential energy surfaces. Specifically, in all these cases we have shown that CCSD and MP2 level AIMD trajectories and potential surfaces may be obtained at density functional theory cost. The approach has been demonstrated for gas-phase studies, for condensed phase electronic structure, and also for basis set extrapolation-based AIMD. Recently, this approach has also been used to derive new quantum-computing algorithms that enormously reduce the quantum circuit depth in a circuit-based computation of correlated electronic structure. In this publication, we introduce (a) a family of neural networks that act in parallel to represent, efficiently, the post-Hartree-Fock electronic structure energy contributions for all simplexes (fragments), and (b) a new k-means-based tessellation strategy to glean training data for high-dimensional molecular spaces and minimize the extent of training needed to construct this family of neural networks. The approach is particularly useful when coupled cluster accuracy is desired and when fragment sizes grow in order to capture nonlocal interactions accurately. The unique multidimensional k-means tessellation/clustering algorithm used to determine our training data for all fragments is shown to be extremely efficient and reduces the needed training to only 10% of data for all fragments to obtain accurate neural networks for each fragment. These fully connected dense neural networks are then used to extrapolate the potential energy surface for all molecular fragments, and these are then combined as per our graph-theoretic procedure to transfer the learning process to a full system energy for the entire AIMD trajectory at less than one-tenth the cost as compared to a regular fragmentation-based AIMD calculation.

Breaking covalent bonds in the context of the many-body expansion (MBE). I. The purported "first row anomaly" in XHn (X = C, Si, Ge, Sn; n = 1-4)

We present a new, novel implementation of the Many-Body Expansion (MBE) to account for the breaking of covalent bonds, thus extending the range of applications from its previous popular usage in the breaking of hydrogen bonds in clusters to molecules. A central concept of the new implementation is the in situ atomic electronic state of an atom in a molecule that casts the one-body term as the energy required to promote it to that state from its ground state. The rest of the terms correspond to the individual diatomic, triatomic, etc., fragments. Its application to the atomization energies of the XHn series, X = C, Si, Ge, Sn and n = 1-4, suggests that the (negative, stabilizing) 2-B is by far the largest term in the MBE with the higher order terms oscillating between positive and negative values and decreasing dramatically in size with increasing rank of the expansion. The analysis offers an alternative explanation for the purported "first row anomaly" in the incremental Hn-1X-H bond energies seen when these energies are evaluated with respect to the lowest energy among the states of the XHn molecules. Due to the "flipping" of the ground/first excited state between CH2 (3B1 ground state, 1A1 first excited state) and XH2, X = Si, Ge, Sn (1A1 ground state, 3B1 first excited state), the overall picture does not exhibit a "first row anomaly" when the incremental bond energies are evaluated with respect to the molecular states having the same in situ atomic states.

Polarization energies in the fragment molecular orbital method

Using isolated and polarized states of fragments, a method for computing the polarization energies in density functional theory (DFT) and density-functional tight-binding (DFTB) is developed in the framework of the fragment molecular orbital method. For DFTB, the method is extended into the use of periodic boundary conditions (PBC), for which a new component, a periodic self-polarization energy, is derived. The couplings of the polarization to other components in the pair interaction energy analysis (PIEDA) are derived for DFT and DFTB, and compared to Hartree-Fock and second-order Møller-Plesset perturbation theory (MP2). The effect of the self-consistent (DFT) and perturbative (MP2) treatment of the electron correlation on the polarization is discussed. The difference in the polarization in the bulk (PBC) and micro (cluster) solvation is elucidated.

The catalytic activity and adsorption in faujasite and ZSM-5 zeolites: the role of differential stabilization and charge delocalization

Adsorption and chemical reactions occurring on industrially important ZSM-5 and faujasite zeolite catalysts are investigated with the quantum-mechanical fragment molecular orbital method combined with periodic boundary conditions. Suitable fragmentation patterns are devised and tested providing important case studies of computing real materials with fragmentation methods. A good accuracy is demonstrated in comparison to full calculations, and a good agreement with the available experimental data is obtained. The full production cycle of p-xylene on faujasite zeolite is mapped. The catalytic role of the zeolite in the dehydration reaction, analyzed with the partition analysis, is attributed to the delocalization of the negative charge over the zeolite. On the other hand, an increase of the barrier in the Diels-Alder reaction by the zeolite is attributed to the preferential stabilization of the reactants over the transition state as demonstrated by the guest-zeolite interaction energy.

Towards a quantitative description of excitonic couplings in photosynthetic pigment-protein complexes: quantum chemistry driven multiscale approaches

A structure-based quantitative calculation of excitonic couplings between photosynthetic pigments has to describe the dynamical polarization of the protein/solvent environment of the pigments, giving rise to reaction field and screening effects. Here, this challenging problem is approached by combining the fragment molecular orbital (FMO) method with the polarizable continuum model (PCM). The method is applied to compute excitonic couplings between chlorophyll a (Chl a) pigments of the water-soluble chlorophyll-binding protein (WSCP). By calibrating the vacuum dipole strength of the 0–0 transition of the Chl a chromophores according to experimental data, an excellent agreement between calculated and experimental linear absorption and circular dichroism spectra of WSCP is obtained. The effect of the mutual polarization of the pigment ground states is calculated to be very small. The simple Poisson-Transition-charge-from-Electrostatic-potential (Poisson-TrEsp) method is found to accurately describe the screening part of the excitonic coupling, obtained with FMO/PCM. Taking into account that the reaction field effects of the latter method can be described by a scalar constant leads to an improvement of Poisson-TrEsp that is expected to provide the basis for simple and realistic calculations of optical spectra and energy transfer in photosynthetic light-harvesting complexes. In addition, we present an expression for the estimation of Huang–Rhys factors of high-frequency pigment vibrations from experimental fluorescence line-narrowing spectra that takes into account the redistribution of oscillator strength by the interpigment excitonic coupling. Application to WSCP results in corrected Huang–Rhys factors that are less than one third of the original values obtained by the standard electronic two-state analysis that neglects the above redistribution. These factors are important for the estimation of the dipole strength of the 0–0 transition of the chromophores and for the development of calculation schemes for the spectral density of the exciton-vibrational coupling.

The importance of reaction field and screening effects on the excitonic couplings is demonstrated, and from quantum-chemical calculations a single scaling factor is derived that can be used to improve simple models based on the Poisson equation.

Free Energy Decomposition Analysis Based on the Fragment Molecular Orbital Method

A decomposition of the free energy is developed in the many-body expansion framework of the fragment molecular orbital (FMO) method combined with umbrella sampling molecular dynamics (MD). In FMO/MD simulations, performed with density-functional tight-binding and periodic boundary conditions, all atoms are treated quantum mechanically. The free energy is computed and decomposed for a series of S_N2 Menshutkin reactions in water. The barrier lowering by the solvent is attributed to the competition between the solvent polarization and the solute-solvent interactions including charge transfer.

Analysis of Guest Adsorption on Crystal Surfaces Based on the Fragment Molecular Orbital Method

For gaining insights into interactions in periodic systems, an analysis is developed based on the fragment molecular orbital method combined with periodic boundary conditions. The adsorption energy is decomposed into guest and surface polarization and deformation energy, guest-surface and guest-guest interactions, and the vibrational free energy. The analysis is applied to the adsorption of guest molecules to Ih (001) ice surface. The cooperativity effects result in a non-linear change in the adsorption energy with coverage due to many-body effects. The role of dispersion is found to be dominant for guests with long hydrophobic tails. A rule is proposed relating the length of the alkyl tail with the formation of the guest layer. The computed binding enthalpies are in good agreement with experimental values. For high coverage, adsorbed molecules can form an ordered layer known as self-assembled monolayer.

Accelerating the Convergence of Self-Consistent Field Calculations Using the Many-Body Expansion

The balance between cost-effective and sufficiently accurate methods represents the proverbial "promised land" for quantum chemistry calculations. The burden thus falls upon theoretical and computational chemists to provide such alternatives to mitigate the issues that arise from the employ of finite computing resources. In this paper, we attempt to demonstrate the importance of the quality of the initial guess for the self-consistent field (SCF) calculation when considering cost reduction techniques. We broach this challenge by using the many body expansion (MBE) to yield high quality density matrices (DMs) which, in turn, are applied as an SCF initial guess. The MBE-DM approaches combined with purification schemes and distance-based cutoff schemes can serve as initial guesses to reduce the SCF cycles necessary for convergence or derive energy directly through one Fock build. To this end, four unique types of clusters including water clusters, fluoride anion water clusters, sodium cation water clusters, and ammonium-bisulfate salt clusters have been used to test the performance of MBE-DM where its truncation at three-body expansion, MBE(3)-DM, shows vast improvement for those four clusters with reductions in the number of SCF cycles up to 40% as compared with the traditional superposition of atomic densities (SAD) guess. Other types of typical initial guesses, superposition of atomic potentials (SAP) and basis set projection (BSP), perform much worse than MBE-DM and SAD. In addition, the MBE-DM shows consistency across an array of fragment types irrespective of charges, size, level of theory, and basis set selection. Through MBE(3)-DM with the distance cutoff and the average purification scheme, the energy can be obtained directly with a mere 3.2 mH of the mean absolute deviation (MAD) for (H₂O)_N=6-55 which is at least 73 times better than the energy prediction using the typical initial guesses (SAD, SAP, and BSP). The corresponding MAD per monomer is only 0.14 mH which reaches the threshold of the "dynamical accuracy". The promising results of the methods outlined in this paper not only indicate two direct routes for computational cost reduction but also lay the possible foundation for composite techniques (i.e., ab initio sampling) that make best use of near converged values as their starting point.

Third-Order Many-Body Expansion of OSV-MP2 Wave Function for Low-Order Scaling Analytical Gradient Computation

We present a many-body expansion (MBE) formulation and implementation for efficient computation of analytical energy gradients from the orbital-specific-virtual second-order Møllet-Plesset perturbation theory (OSV-MP2) based on our earlier work (Zhou et al. J. Chem. Theory Comput. 2020, 16, 196-210). The third-order MBE(3) expansion of OSV-MP2 amplitudes and density matrices was developed to adopt the orbital-specific clustering and long-range termination schemes, which avoids term-by-term differentiations of the MBE energy bodies. We achieve better efficiency by exploiting the algorithmic sparsity that allows us to prune out insignificant fitting integrals and OSV relaxations. With these approximations, the present implementation is benchmarked on a range of molecules that show an economic scaling in the linear and quadratic regimes for computing MBE(3)-OSV-MP2 amplitude and gradient equations, respectively, and yields normal accuracy comparable to the original OSV-MP2 results. The MPI-3-based parallelism through shared memory one-sided communication is further developed for improving parallel scalability and memory accessibility by sorting the MBE(3) orbital clusters into independent tasks that are distributed on multiple processes across many nodes, supporting both global and local data locations in which selected MBE(3)-OSV-MP2 intermediates of different sizes are distinguished and accordingly placed. The accuracy and efficiency level of our MBE(3)-OSV-MP2 analytical gradient implementation is finally illustrated in two applications: we show that the subtle coordination structure differences of mechanically interlocked Cu-catenane complexes can be distinguished when tuning ligand lengths; and the porphycene molecular dynamics reveals the emergence of the vibrational signature arising from softened N-H stretching associated with hydrogen transfer, using an MP2 level of electron correlation and classical nuclei for the first time.

Molecular Dynamics Driven by the Many-Body Expansion (MBE-MD)

We present a protocol for classical and nuclear quantum dynamics, in which the energies and forces are generated by the many-body expansion (MBE), and apply it to water clusters using the TTM2.1-F and MB-Pol interaction potentials at various temperatures. We carry out MBE-molecular dynamics (MD) classical and nuclear quantum dynamical simulations, in which the energies and forces of the full system are approximated by the two-, three-, and four-body terms of the MBE, and compare the average potential and the vibrational density of states with the full simulation, i.e., the one for which no MBE is used. Our results indicate that the thermally averaged potential energy from the MBE up to the four-body term converges with near-identical behavior to the one from the full simulation. The three-body makes a substantial contribution (∼20%) to the energy, whereas the four-body is necessary for obtaining quantitatively accurate energetics and forces, albeit making a small contribution to each (∼2%). We further show that the harmonic frequencies are reproduced to within a few wavenumbers (cm^-1) at the four-body level and that the slowest modes to converge with the MBE rank are those involving the strongest hydrogen bonds. Anharmonicity exacerbates this effect, so that a four-body description of the energies and forces is needed to achieve accurate anharmonic vibrational frequencies in the hydrogen-bonded OH-stretching region. We also discuss the asymptotic scaling of the MBE-MD protocol with respect to the cost of the underlying potential energy evaluation, suggesting that electronic structure methods that scale at least as N⁴, N being the size of the system, are needed to result in savings over the traditional full MD simulation. We anticipate that the MBE-MD protocol can evolve into a powerful and practical method, which will allow for highly accurate ab initio MD simulations on a much broader range of molecular systems than can be currently handled.

A unified and flexible formulation of molecular fragmentation schemes

We present a flexible formulation for energy-based molecular fragmentation schemes. This framework does not only incorporate the majority of existing fragmentation expansions but also allows for flexible formulation of novel schemes. We further illustrate its application in multi-level approaches and for electronic interaction energies. For the examples of small water clusters, a small protein, and protein-protein interaction energies, we show how this flexible setup can be exploited to generate a well-suited multi-level fragmentation expansion for the given case. With such a setup, we reproduce the electronic protein-protein interaction energy of ten different structures of a neurotensin and an extracellular loop of its receptor with a mean absolute deviation to the respective super-system calculations below 1 kJ/mol.

Protein Response Effects on Cofactor Excitation Energies from First Principles: Augmenting Subsystem Time-Dependent Density-Functional Theory with Many-Body Expansion Techniques

We investigate the possibility of describing protein response effects on a chromophore excitation by means of subsystem time-dependent density-functional theory (sTDDFT) in combination with a many-body expansion (MBE) approach. While sTDDFT is in principle intrinsically able to include such contributions, addressing cofactor excitations in protein models or entire proteins with full environment-response treatments is currently out of reach. Taking different model structures of the green fluorescent protein (GFP) and bovine rhodopsin as examples, we demonstrate that an embedded-MBE approach based on sTDDFT in its simplest version leads to a good agreement of the predicted protein response effect already at second order. To reproduce reference response effects from nonsubsystem TDDFT calculations quantitatively (error ≤ 5%), however, a third- or even fourth-order MBE may be required. For the latter case, we explore a selective inclusion of fourth-order terms that drastically reduces the computational burden. In addition, we demonstrate how this sTDDFT-MBE treatment can be utilized as an analysis tool to identify residues with dominant response contributions. This, in turn, can be employed to arrive at smaller structural models for light-absorbing proteins, which still feature all of the main characteristics in terms of photoresponse properties.

Quantum-Mechanical Structure Optimization of Protein Crystals and Analysis of Interactions in Periodic Systems

A fast quantum-mechanical approach, density-functional tight-binding combined with the fragment molecular orbital method and periodic boundary conditions, is used to optimize atomic coordinates and cell parameters for a set of protein crystals: 1ETL, 5OQZ, 3Q8J, 1CBN, and 2VB1. Good agreement between experimental and calculated structures is obtained for both atomic coordinates and cell parameters. Sterical clashes present in the experimental structures are corrected by simulations. The partition analysis is extended to treat periodic boundary conditions and applied to analyze protein-solvent interactions in crystals.

Software for the frontiers of quantum chemistry: An overview of developments in the Q-Chem 5 package

This article summarizes technical advances contained in the fifth major release of the Q-Chem quantum chemistry program package, covering developments since 2015. A comprehensive library of exchange-correlation functionals, along with a suite of correlated many-body methods, continues to be a hallmark of the Q-Chem software. The many-body methods include novel variants of both coupled-cluster and configuration-interaction approaches along with methods based on the algebraic diagrammatic construction and variational reduced density-matrix methods. Methods highlighted in Q-Chem 5 include a suite of tools for modeling core-level spectroscopy, methods for describing metastable resonances, methods for computing vibronic spectra, the nuclear-electronic orbital method, and several different energy decomposition analysis techniques. High-performance capabilities including multithreaded parallelism and support for calculations on graphics processing units are described. Q-Chem boasts a community of well over 100 active academic developers, and the continuing evolution of the software is supported by an "open teamware" model and an increasingly modular design.

Ab initio multi-level layered elongation method and its application to local interaction analysis between DNA bulge and ligand molecules

A multi-level layered elongation method was developed for efficiently analyzing the electronic states of local structures in large bio/nano-systems at the full ab initio level of theory. The original elongation method developed during the last three decades in our group has focused on the system in one direction from one terminal to the other terminal to sequentially construct the electronic states of a polymer, called a theoretical synthesis of polymers. In this study, an important region termed the central (C) part is targeted in a large polymer and the remainder are terminal (T) parts. The electronic structures along with polymer elongation are calculated repeatedly from both end T parts to the C central part at the same time. The important C part is treated with large basis sets (high level) and the other regions are treated with small basis sets (low level) in the ab initio theoretical framework. The electronic structures besides the C part can be reused for other systems with different structures at the C part, which renders the method computationally efficient. This multi-level layered elongation method was applied to the investigation on DNA single bulge recognition of small molecules (ligands). The reliability and validity of our approach were examined in comparison with the results obtained by direct calculations using a conventional quantum chemical method for the entire system. Furthermore, stabilization energies by the formation of the complex of bulge DNA and a ligand were estimated with basis set superposition error corrections incorporated into the elongation method.

Cluster many-body expansion: A many-body expansion of the electron correlation energy about a cluster mean field reference

The many-body expansion (MBE) is an efficient tool that has a long history of use for calculating interaction energies, binding energies, lattice energies, and so on. In the past, applications of MBE to correlation energy have been unfeasible for large systems, but recent improvements to computing resources have sparked renewed interest in capturing the correlation energy using the generalized nth order Bethe-Goldstone equation. In this work, we extend this approach, originally proposed for a Slater determinant, to a tensor product state (TPS) based wavefunction. By partitioning the active space into smaller orbital clusters, our approach starts from a cluster mean field reference TPS configuration and includes the correlation contribution of the excited TPSs using the MBE. This method, named cluster MBE (cMBE), improves the convergence of MBE at lower orders compared to directly doing a block-based MBE from a RHF reference. We present numerical results for strongly correlated systems, such as the one- and two-dimensional Hubbard models and the chromium dimer. The performance of the cMBE method is also tested by partitioning the extended π space of several large π-conjugated systems, including a graphene nano-sheet with a very large active space of 114 electrons in 114 orbitals, which would require 10⁶⁶ determinants for the exact FCI solution.

Partitioning of the Vibrational Free Energy

Vibrational energies are partitioned into the contributions of molecular parts called segments, for instance, residues in proteins. The fragment molecular orbital method is used to facilitate vibrational calculations of large systems at the DFTB and HF-3c levels. The vibrational analysis is combined with the partitioning of the electronic energy, yielding free-energy contributions of segments to the binding energy, pinpointing hot spots for drug discovery and other studies. The analysis is illustrated on two protein-ligand complexes in solution.

Density-Based Many-Body Expansion as an Efficient and Accurate Quantum-Chemical Fragmentation Method: Application to Water Clusters

Fragmentation methods based on the many-body expansion offer an attractive approach for the quantum-chemical treatment of large molecular systems, such as molecular clusters and crystals. Conventionally, the many-body expansion is performed for the total energy, but such an energy-based many-body expansion often suffers from a slow convergence with respect to the expansion order. For systems that show strong polarization effects such as water clusters, this can render the energy-based many-body expansion infeasible. Here, we establish a density-based many-body expansion as a promising alternative approach. By performing the many-body expansion for the electron density instead of the total energy and inserting the resulting total electron density into the total energy functional of density functional theory, one can derive a density-based energy correction, which in principle accounts for all higher-order polarization effects. Here, we systematically assess the accuracy of such a density-based many-body expansion for test sets of water clusters. We show that already a density-based two-body expansion is able to reproduce interaction energies per fragment within chemical accuracy and is able to accurately predict the energetic ordering as well as the relative interaction energies of different isomers of water clusters.

Weighted-Graph-Theoretic Methods for Many-Body Corrections within ONIOM: Smooth AIMD and the Role of High-Order Many-Body Terms

We present a weighted-graph-theoretic approach to adaptively compute contributions from many-body approximations for smooth and accurate post-Hartree-Fock (pHF) ab initio molecular dynamics (AIMD) of highly fluxional chemical systems. This approach is ONIOM-like, where the full system is treated at a computationally feasible quality of treatment (density functional theory (DFT) for the size of systems considered in this publication), which is then improved through a perturbative correction that captures local many-body interactions up to a certain order within a higher level of theory (post-Hartree-Fock in this publication) described through graph-theoretic techniques. Due to the fluxional and dynamical nature of the systems studied here, these graphical representations evolve during dynamics. As a result, energetic "hops" appear as the graphical representation deforms with the evolution of the chemical and physical properties of the system. In this paper, we introduce dynamically weighted, linear combinations of graphs, where the transition between graphical representations is smoothly achieved by considering a range of neighboring graphical representations at a given instant during dynamics. We compare these trajectories with those obtained from a set of trajectories where the range of local many-body interactions considered is increased, sometimes to the maximum available limit, which yields conservative trajectories as the order of interactions is increased. The weighted-graph approach presents improved dynamics trajectories while only using lower-order many-body interaction terms. The methods are compared by computing dynamical properties through time-correlation functions and structural distribution functions. In all cases, the weighted-graph approach provides accurate results at a lower cost.

The fragment molecular orbital method combined with density-functional tight-binding and periodic boundary conditions

The density-functional tight-binding (DFTB) formulation of the fragment molecular orbital method is combined with periodic boundary conditions. Long-range electrostatics and dispersion are evaluated with the Ewald summation technique. The first analytic derivatives of the energy with respect to atomic coordinates and lattice parameters are formulated. The accuracy of the method is established in comparison to numerical gradients and DFTB without fragmentation. The largest elementary cell in this work has 1631 atoms. The method is applied to elucidate the polarization, charge transfer, and interactions in the solution.

Random-Phase Approximation in Many-Body Noncovalent Systems: Methane in a Dodecahedral Water Cage

The many-body expansion (MBE) of energies of molecular clusters or solids offers a way to detect and analyze errors of theoretical methods that could go unnoticed if only the total energy of the system was considered. In this regard, the interaction between the methane molecule and its enclosing dodecahedral water cage, CH₄···(H₂O)₂₀, is a stringent test for approximate methods, including density functional theory (DFT) approximations. Hybrid and semilocal DFT approximations behave erratically for this system, with three- and four-body nonadditive terms having neither the correct sign nor magnitude. Here, we analyze to what extent these qualitative errors in different MBE contributions are conveyed to post-Kohn-Sham random-phase approximation (RPA), which uses approximate Kohn-Sham orbitals as its input. The results reveal a correlation between the quality of the DFT input states and the RPA results. Moreover, the renormalized singles energy (RSE) corrections play a crucial role in all orders of the many-body expansion. For dimers, RSE corrects the RPA underbinding for every tested Kohn-Sham model: generalized-gradient approximation (GGA), meta-GGA, (meta-)GGA hybrids, as well as the optimized effective potential at the correlated level. Remarkably, the inclusion of singles in RPA can also correct the wrong signs of three- and four-body nonadditive energies as well as mitigate the excessive higher-order contributions to the many-body expansion. The RPA errors are dominated by the contributions of compact clusters. As a workable method for large systems, we propose to replace those compact contributions with CCSD(T) energies and to sum up the remaining many-body contributions up to infinity with supermolecular or periodic RPA. As a demonstration of this approach, we show that for RPA(PBE0)+RSE it suffices to apply CCSD(T) to dimers and 30 compact, hydrogen-bonded trimers to get the methane-water cage interaction energy to within 1.6% of the reference value.

Partition Analysis for Density-Functional Tight-Binding

High-order charge transfer is incorporated into the fragment molecular orbital (FMO) method using a charge transfer state with fractional charges. This state is used for a partition analysis of properties based on segments that may be different from fragments in FMO. The partition analysis is also formulated for calculations without fragmentation. All development in this work is limited to density-functional tight-binding. The analysis is applied to a water cluster, crambin (PDB: 1CBN), and two complexes of Trp-cage (1L2Y) with ligands. The contributions of functional groups in ligands are obtained, providing useful information for drug discovery.

Adaptive density-guided approach to double incremental potential energy surface construction

We present a combination of the recently developed double incremental expansion of potential energy surfaces with the well-established adaptive density-guided approach to grid construction. This unique methodology is based on the use of an incremental expansion for potential energy surfaces, known as n-mode expansion; an incremental many-body representation of the electronic energy; and an efficient vibrational density-guided approach to automated determination of grid dimensions and granularity. The reliability of the method is validated calculating potential energy surfaces and obtaining fundamental excitation energies for three moderate-size chain-like molecular systems. The use of our methodology leads to considerable computational savings for potential energy surface construction compared to standard approaches while maintaining a high level of accuracy in the resulting potential energy surfaces. Additional investigations indicate that our method can be applied to covalently bound and strongly interacting molecular systems, even though these cases are known to be very unfavorable for fragmentation schemes. We therefore conclude that the presented methodology is a robust and flexible approach to potential energy surface construction, which introduces considerable computational savings without compromising the accuracy of vibrational spectra calculations.