9,10-Dicyanoanthracene Catalyzed Decarboxylative Alkynylation of Carboxylic Acids under Visible-Light Irradiation

Photocatalytic decarboxylation of free carboxylic acids and their functionalization

Visible light mediated decarboxylative functionalization of carboxylic acids and their derivatives has recently emerged as a novel and powerful toolkit for small molecule activation in diverse carbon-carbon and carbon-hetero bond forming reactions. Naturally abundant highly functionalized bench-stable carboxylic acid analogs have been employed as promising alternatives to non-trivial organometallic reagents for mild and eco-benign synthetic transformation with traceless CO2 by-products. In this highlight article, we focus on the development of various photodecarboxylative functionalization strategies along with intra/inter-molecular cyclization via concerted single electron transfer (SET) or energy transfer (ET) pathways. Moreover, widely explored carboxylic acids are systematically classified here into four categories; i.e., α-keto, aliphatic, α,β-unsaturated, and aromatic analogs for a concise overview to the readership. The association of decarboxylative radical species with coupling partners to construct C-C and C-N/O/S/P/X bonds for each analogous acid has been presented in brief.

Sensitizer-controlled photochemical reactivity via upconversion of red light

By combining the energy input from two red photons, chemical reactions that would normally require blue or ultraviolet irradiation become accessible. Key advantages of this biphotonic excitation strategy are that red light usually penetrates deeper into complex reaction mixtures and causes less photo-damage than direct illumination in the blue or ultraviolet. Here, we demonstrate that the primary light-absorber of a dual photocatalytic system comprised of a transition metal-based photosensitizer and an organic co-catalyst can completely alter the reaction outcome. Photochemical reductions are achieved with a copper(i) complex in the presence of a sacrificial electron donor, whereas oxidative substrate activation occurs with an osmium(ii) photosensitizer. Based on time-resolved laser spectroscopy, this changeover in photochemical reactivity is due to different underlying biphotonic mechanisms. Following triplet energy transfer from the osmium(ii) photosensitizer to 9,10-dicyanoanthracene (DCA) and subsequent triplet-triplet annihilation upconversion, the fluorescent singlet excited state of DCA triggers oxidative substrate activation, which initiates the cis to trans isomerization of an olefin, a [2 + 2] cycloaddition, an aryl ether to ester rearrangement, and a Newman-Kwart rearrangement. This oxidative substrate activation stands in contrast to the reactivity with a copper(i) photosensitizer, where photoinduced electron transfer generates the DCA radical anion, which upon further excitation triggers reductive dehalogenations and detosylations. Our study provides the proof-of-concept for controlling the outcome of a red-light driven biphotonic reaction by altering the photosensitizer, and this seems relevant in the greater context of tailoring photochemical reactivities.

Red Light-Based Dual Photoredox Strategy Resembling the Z-Scheme of Natural Photosynthesis

Photoredox catalysis typically relies on the use of single chromophores, whereas strategies, in which two different light absorbers are combined, are rare. In photosystems I and II of green plants, the two separate chromophores P₆₈₀ and P₇₀₀ both absorb light independently of one another, and then their excitation energy is combined in the so-called Z-scheme, to drive an overall reaction that is thermodynamically very demanding. Here, we adapt this concept to perform photoredox reactions on organic substrates with the combined energy input of two red photons instead of blue or UV light. Specifically, a Cu^I bis(α-diimine) complex in combination with in situ formed 9,10-dicyanoanthracenyl radical anion in the presence of excess diisopropylethylamine catalyzes ca. 50 dehalogenation and detosylation reactions. This dual photoredox approach seems useful because red light is less damaging and has a greater penetration depth than blue or UV radiation. UV-vis transient absorption spectroscopy reveals that the subtle change in solvent from acetonitrile to acetone induces a changeover in the reaction mechanism, involving either a dominant photoinduced electron transfer or a dominant triplet-triplet energy transfer pathway. Our study illustrates the mechanistic complexity in systems operating under multiphotonic excitation conditions, and it provides insights into how the competition between desirable and unwanted reaction steps can become more controllable.

Hypervalent Iodine-Mediated Late-Stage Peptide and Protein Functionalization

Hypervalent iodine compounds are powerful reagents for the development of novel transformations. As they exhibit low toxicity, high functional group tolerance, and stability in biocompatible media, they have been used for the functionalization of biomolecules. Herein, we report recent advances up to June 2021 in peptide and protein modification using hypervalent iodine reagents. Their use as group transfer or oxidizing reagents is discussed in this Minireview, including methods targeting polar, aromatic, or aliphatic amino acids and peptide termini.

C-H Acyloxylation of Polycyclic Aromatic Hydrocarbons

The C-H acyloxylation of polycyclic aromatic hydrocarbons (PAHs) is described. This reaction constructs aryl acyloxylate scaffolds from PAHs with equimolar hypervalent iodine compounds under mild reaction conditions. Interestingly, the blue light irradiation accelerated this transformation. Additionally, the synthesis of structurally new symmetric and unsymmetric diaroyloxylated fluoranthenes was accomplished with a ruthenium photoredox catalyst.

Catalyst-free visible light-induced decarboxylative amination of glycine derivatives with azo compounds

A visible light-induced, catalyst-free decarboxylative amination of glycine derivatives with azo compounds was achieved to deliver functionalized aminals under mild reaction conditions.

An in situ masking strategy enables radical monodecarboxylative C-C bond coupling of malonic acid derivatives

The utilization of malonic acids in radical decarboxylative functionalization is still underexploited, and the few existing examples are primarily limited to bisdecarboxylative functionalization. While radical monodecarboxylative functionalization is highly desirable, it is challenging because of the difficulty in suppressing the second radical decarboxylation step. Herein, we report the successful radical monodecarboxylative C–C bond coupling of malonic acids with ethynylbenziodoxolone (EBX) reagents enabled by an in situ masking strategy, affording synthetically useful 2(3H)-furanones in satisfactory yields. The keys to the success of this transformation include (1) the dual role of a silver catalyst as a single-electron transfer catalyst to drive the radical decarboxylative alkynylation and as a Lewis acid catalyst to promote the 5-endo-dig cyclization and (2) the dual function of the alkynyl reagent as a radical trapper and as an in situ masking group. Notably, the latent carboxylate group in the furanones could be readily released, which could serve as a versatile synthetic handle for further elaborations. Thus, both carboxylic acid groups in malonic acid derivatives have been well utilized for the rapid construction of molecular complexity.

An in situ masking strategy has been developed based upon the unique properties of silver catalysts to successfully achieve a radical monodecarboxylative C–C bond coupling of malonic acids with ethynylbenziodoxolone reagents.

Visible-Light-Mediated Deoxyalkynylation of Activated Tertiary Alcohols

In this paper, visible-light-induced deoxyalkynylation of activated tertiary alcohols has been successfully performed under mild reaction conditions with ethynylbenziodoxole as the readily available alkynylation reagent. The desired C(sp³)-C(sp) coupling can smoothly occur with 4-CzIPN as a photocatalyst, affording a wide range of valuable alkynylation products bearing quaternary carbon centers in 37-84% yields.

Recent advances in visible light-activated radical coupling reactions triggered by (i) ruthenium, (ii) iridium and (iii) organic photoredox agents

Photoredox chemistry with organic or transition metal agents has been reviewed in earlier years, but such is the pace of progress that we will overlap very little with earlier comprehensive reviews. This review first presents an overview of the area of research and then examines recent examples of C-C, C-N, C-O and C-S bond formations via radical intermediates with transition metal and organic radical promoters. Recent successes with Birch reductions are also included. The transition metal chemistry will be restricted to photocatalysts based on the most widely used metals, Ru and Ir, but includes coupling chemistries that take advantage of low-valent nickel, or occasionally copper, complexes to process the radicals that are formed. Our focus is on developments in the past 10 years (2011-2021). This period has also seen great advances in the chemistry of organic photoredox reagents and the review covers this area. The review is intended to present highlights and is not comprehensive.

Recent Synthetic Applications of the Hypervalent Iodine(III) Reagents in Visible-Light-Induced Photoredox Catalysis

The synergistic combination of visible-light-induced photoredox catalysis with hypervalent iodine(III) reagents (HIRs) represents a particularly important achievement in the field of hypervalent iodine chemistry, and numerous notable organic transformations were achieved in a mild and environmentally benign fashion. This account intends to summarize recent synthetic applications of HIRs in visible-light-induced photoredox catalysis, and they are organized in terms of the photochemical roles of HIRs played in reactions.

Visible Light-Induced Direct S0 → Tn Transition of Benzophenone Promotes C(sp3)-H Alkynylation of Ethers and Amides

Benzophenone has an S₀ → S₁ absorption band at 365 nm. However, the rarely reported S₀ → T_n transition occurs upon irradiation at longer wavelengths. Herein, we employed benzophenone as a catalyst and exploited its S₀ → T_n transition in C(sp³)-H alkynylations with hypervalent iodine reagents. The selective benzophenone excitation prevented alkynylating reagent decomposition, enabling the reaction to proceed under mild conditions. The reaction mechanism was investigated by spectroscopic and computational studies.

Emodin as a novel organic photocatalyst for selective oxidation of sulfides under mild conditions

Herein, we have developed naturally-occurring Emodin, which is commercially available at low-cost, as a novel organic photocatalyst for the first time. Emodin was successfully employed in the selective oxidation of sulfides promoted by visible-light, delivering valuable sulfoxides with high efficiency. Mechanistic investigations suggested both single-electron transfer (SET) and energy transfer (EnT) pathways might be involved in the oxidation reaction.

Copper-catalysed photoinduced decarboxylative alkynylation: a combined experimental and computational study

Redox-active esters (RAEs) as alkyl radical precursors have demonstrated great advantages for C–C bond formation. A decarboxylative cross-coupling method is described to afford substituted alkynes from various carboxylic acids using copper catalysts CuCl and Cu(acac)₂. The photoexcitation of copper acetylides with electron-rich NEt₃ as a ligand provides a general strategy to generate a range of alkyl radicals from RAEs of carboxylic acids, which can be readily coupled with a variety of aromatic alkynes. The scope of this cross-coupling reaction can be further expanded to aliphatic alkynes and alkynyl silanes using a catalytic amount of preformed copper-phenylacetylide. In addition, DFT calculations revealed the favorable reaction pathway and that the bidentate acetylacetonate ligand of the copper intermediate plays an important role in inhibiting the homo-coupling of the alkyne.

Redox-active esters (RAEs) as alkyl radical precursors have demonstrated great advantages for Cu-catalysed C–C bond formation.

s-Tetrazine Dyes: A Facile Generation of Photoredox Organocatalysts for Routine Oxidations

A series of organic dyes derived from s-tetrazine have been synthesized, and their photophysical and electrochemical properties are systematically investigated. Testing these compounds as photoredox catalysts in a model oxidative C-S bond cleavage of thioethers has led us to identify new classes of active s-tetrazines. Moreover, some of them can be formed in situ from commercially available 3,6-dichlorotetrazine, making this photocatalyzed C-S bond functionalization simple and highly practical.

Alkynylation of radicals: spotlight on the "Third Way" to transfer triple bonds

The alkynylation of radical intermediates has been known since a long time, but had not been broadly applied in synthetic chemistry, in contrast to the alkynylation of either electrophiles or nucleophiles. In the last decade however, it has been intensively investigated leading to new disconnections to introduce versatile triple bonds into organic compounds. Nowadays, such processes are important alternatives to classical nucleophilic and electrophilic alkynylations. Efficient alkyne transfer reagents, in particular arylsulfones and hypervalent iodine reagents were introduced. Direct alkynylation, as well as cascade reactions, were subsequently developed. If relatively harsh conditions were required in the past, a new era began with progress in photoredox and transition metal catalysis. Starting from various radical precursors, alkynylations under very mild reaction conditions were rapidly discovered. This review covers the evolution of radical alkynylation, from its emergence to its current intensive stage of development. It will focus in particular on improvements for the generation of radicals and on the extension of the scope of radical precursors and alkyne sources.

Metal-Free Method for Direct Synthesis of Functionalized β-Ketoenamines

A new method for direct synthesis of β-ketoenamines was developed by a BF₃·OEt₂-catalyzed cyclization of 1-iodoalkyne and α-keto acid followed by an amine-mediated ring-opening in one pot. Its metal-free conditions allowed the easy synthesis of those products bearing the transition metal-sensitive functional groups. Its three-component process achieved wide range of functionalized products.

Photocatalytic decarboxylations

During the last years, the field of photocatalytic decarboxylations has emerged rapidly. Carboxylic acids are inexpensive, non-toxic and renewable starting materials for the synthesis of pharmaceuticals or platform chemicals. The traceless extrusion of CO2 gives radical intermediates, which react in diverse cross-coupling reactions. Merging photocatalysis with metal catalysis enables even broader substrate scopes or enantioselective reactions. An overview of photocatalytic decarboxylative reactions of different classes of carboxylic acids is given within this chapter.

Fine-tuned organic photoredox catalysts for fragmentation-alkynylation cascades of cyclic oxime ethers

Fine-tuned organic photoredox catalysts are introduced for the metal-free alkynylation of alkylnitrile radicals generated via oxidative ring opening of cyclic alkylketone oxime ethers. The redox properties of the dyes were determined by both cyclic voltammetry and computation and covered an existing gap in the oxidation potential of photoredox organocatalysts.

Photoinduced Copper-Catalyzed Coupling of Terminal Alkynes and Alkyl Iodides

We have developed a photoinduced copper-catalyzed alkylation of terminal alkynes with primary, secondary, or tertiary alkyl iodides as electrophiles. The reaction has a broad substrate scope and can be successfully performed in the presence of ester, nitrile, aryl halide, ketone, sulfonamide, epoxide, alcohol, and amide functional groups. The alkylation is promoted by blue light (λ≈450 nm) and proceeds at room temperature in the absence of any additional metal catalysts. The use of a terpyridine ligand is essential for the success of the reaction and is shown to prevent photoinduced copper-catalyzed polymerization of the starting materials.

A general two-step one-pot synthesis process of ynones from α-keto acids and 1-iodoalkynes

A two-step one-pot synthesis process of ynones was developed by cycloaddition of α-keto acids and 1-iodoalkynes followed by a ring-opening reaction.

Decarboxylative Alkynylation

The development of a new decarboxylative cross-coupling method that affords terminal and substituted alkynes from various carboxylic acids is described using both nickel- and iron-based catalysts. The use of N-hydroxytetrachlorophthalimide (TCNHPI) esters is crucial to the success of the transformation, and the reaction is amenable to in situ carboxylic acid activation. Additionally, an inexpensive, commercially available alkyne source is employed in this formal homologation process that serves as a surrogate for other well-established alkyne syntheses. The reaction is operationally simple and broad in scope while providing succinct and scalable avenues to previously reported synthetic intermediates.

Reductive Decarboxylative Alkynylation of N-Hydroxyphthalimide Esters with Bromoalkynes

A new method for the synthesis of terminal and internal alkynes from the nickel-catalyzed decarboxylative coupling of N-hydroxyphthalimide esters and bromoalkynes is presented. This reductive cross-electrophile coupling is the first to use a C(sp)-X electrophile, and appears to proceed via an alkynylnickel intermediate. The internal alkyne products are obtained in yields of 41-95 % without the need for a photocatalyst, light, or a strong oxidant. The reaction displays a broad scope of carboxylic acid and alkyne coupling partners, and can tolerate an array of functional groups, including carbamate NH, halogen, nitrile, olefin, ketone, and ester moieties. Mechanistic studies suggest that this process does not involve an alkynylmanganese reagent and instead proceeds through nickel-mediated bond formation.