Amphiphilic BODIPY-Hydroporphyrin Energy Transfer Arrays with Broadly Tunable Absorption and Deep Red/Near-Infrared Emission in Aqueous Micelles

Geometry-Independent Ultrafast Energy Transfer in Bioinspired Arrays Containing Electronically Coupled BODIPY Dimers as Energy Donors

In photosynthetic light-harvesting complexes, strong interaction between chromophores enables efficient absorption of solar radiation and has been suggested to enable ultrafast energy funneling to the reaction center. To examine whether similar effects can be realized in synthetic systems, and to determine the mechanisms of energy transfer, we synthesized and characterized a series of bioinspired arrays containing strongly-coupled BODIPY dimers as energy donors and chlorin derivatives as energy acceptors. The BODIPY dimers feature broad absorption in the range of 500-600 nm, complementing the chlorin absorption to provide absorption across the entire visible spectrum. Ultrafast (~10 ps) energy transfer was observed from photoexcited BODIPY dyads to chlorin subunits. Surprisingly, the energy-transfer rate is nearly independent of the position where the BODIPY dimer is attached to the chlorin and of the type of connecting linker. In addition, the energy-transfer rate from BODIPY dimers to chlorin is slower than the corresponding rate in arrays containing BODIPY monomers. The lower rate, corresponding to less efficient through-bond transfer, is most likely due to weaker electronic coupling between the ground state of the chlorin acceptor and the delocalized electronic state of the BODIPY dimer, compared to the localized state of a BODIPY monomer.

Simultaneous multicolor imaging of lymph node chains using hydroporphyrin-doped near-infrared-emitting polymer dots

Aim: Evaluation of lymphatic drainage can be challenging to differentiate between separate drainage basins because only one 'color' is typically employed in sentinel node studies. This study aimed to test the feasibility of multicolor in vivo lymphangiography using newly developed organic polymer dots. Materials & methods: Biocompatible, purely organic, hydroporphyrin-doped near-infrared-emitting polymer dots were developed and evaluated for in vivo multicolor imaging in mouse lymph nodes. Results & conclusion: The authors demonstrated successful multicolor in vivo fluorescence lymphangiography using polymer dots, each tuned to a different emission spectrum. This allows minimally invasive visualization of at least four separate lymphatic drainage basins using fluorescent nanoparticles, which have the potential for clinical translation.

Synthesis of bacteriochlorins bearing diverse β-substituents

Eleven bacteriochlorins have been prepared for surface attachment, bioconjugation, water-solubilization, vibrational studies, and elaboration into multichromophore arrays.

Amphiphilic Near-IR-Emitting 3,5-Bis(2-Pyrrolylethenyl)BODIPY Derivatives: Synthesis, Characterization, and Comparison with Other (Hetero)Arylethenyl-Substituted BODIPYs

A series of 3,5-bis(hetero)arylethenyl-substituted BODIPY derivatives have been prepared by Knoevenagel-type condensation of alkyl-substituted BODIPY with the corresponding aldehydes. 2-Pyrrolylethenyl-substituted derivatives feature near-IR emission (λ_em > 700 nm) with a high fluorescence quantum yield. Both the emission maxima and fluorescence quantum yields are relatively insensitive to solvent polarity, contrary to the corresponding near-IR-emitting 4-(N,N-dimethylaminophenyl)ethenyl derivatives. Alkylation at the N-pyrrolic position of the ethenyl substituent allows for the installation of the hydrophilic PEG group and afforded amphiphilic BODIPY derivatives. Overall, 2-pyrrolylethenyl-substituted BODIPY derivatives appear to be versatile fluorophores with potential applications in near-IR imaging.

Weakly conjugated bacteriochlorin-bacteriochlorin dyad: Synthesis and photophysical properties

Dyads containing two near-infrared absorbing and emitting bacteriochlorins with distinct spectral properties have been prepared and characterized by absorption, emission, and transient-absorption spectroscopies. The dyads exhibit ultrafast ([Formula: see text]3 ps) energy transfer from the bacteriochlorin with the higher-energy S1 state to the bacteriochlorin emitting at the longer wavelength. The dyads exhibit strong fluorescence and relatively long excited state lifetimes ([Formula: see text]4 ns) in both non-polar and polar solvents, which indicates negligible photoinduced electron transfer between the two bacteriochlorins in the dyads. These dyads are thus attractive for the development of light-harvesting arrays and fluorophores for in vivo bioimaging.

Solvent-dependent energy and charge transfer dynamics in hydroporphyrin-BODIPY arrays

Arrays of hydroporphyrins with boron complexes of dipyrromethene (BODIPY) are a promising platform for biomedical imaging or solar energy conversion, but their photophysical properties have been relatively unexplored. In this paper, we use time-resolved fluorescence, femtosecond transient absorption spectroscopy, and density-functional-theory calculations to elucidate solvent-dependent energy and electron-transfer processes in a series of chlorin- and bacteriochlorin-BODIPY arrays. Excitation of the BODIPY moiety results in ultrafast energy transfer to the hydroporphyrin moiety, regardless of the solvent. In toluene, energy is most likely transferred via the through-space Förster mechanism from the S₁ state of BODIPY to the S₂ state of hydroporphyrin. In DMF, substantially faster energy transfer is observed, which implies a contribution of the through-bond Dexter mechanism. In toluene, excited hydroporphyrin components show bright fluorescence, with quantum yield and fluorescence lifetime comparable to those of the benchmark monomer, whereas in DMF, moderate to significant reduction of both quantum yield and fluorescence lifetime are observed. We attribute this quenching to photoinduced charge transfer from hydroporphyrin to BODIPY. No direct spectral signature of the charge-separated state is observed, which suggests that either (1) the charge-separated state decays very quickly to the ground state or (2) virtual charge-separated states, close in energy to S₁ of hydroporphyrin, promote ultrafast internal conversion.

Bioconjugatable synthetic chlorins rendered water-soluble with three PEG-12 groups via click chemistry

Chlorins provide many ideal features for use as red-region fluorophores but require molecular tailoring for solubilization in aqueous solution. A chlorin building-block bearing 18,18-dimethyl, 15-bromo and 10-[2,4,6-tris(propargyloxy)phenyl] substituents has been transformed via click chemistry with CH3(OCH2CH[Formula: see text]-N3 followed by Suzuki coupling with 3-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)propanoic acid, thereby installing a water-solubilization motif and a bioconjugatable handle, respectively. In toluene, [Formula: see text]-dimethylformamide (DMF) or water, the resulting facially encumbered free base chlorin exhibits characteristic chlorin absorption ([Formula: see text] [Formula: see text]412, 643 nm) and fluorescence ([Formula: see text] [Formula: see text]645 nm) spectra with only modest variation in fluorescence quantum yield ([Formula: see text] values (0.24, 0.25 and 0.19, respectively). The zinc chlorin derived therefrom exhibits similar spectral constancy ([Formula: see text] [Formula: see text]414 and 613 nm, [Formula: see text] [Formula: see text]616 nm) and [Formula: see text] 0.094, 0.10 and 0.086 in the three solvents. The results together indicate the viability of the molecular design and synthetic methodology to create red-region fluorophores for use in diverse applications.

Annulated bacteriochlorins for near-infrared photophysical studies

Bacteriochlorins with phenaleno or benzo annulation absorb at 913 or 1033 nm and exhibit excited-state lifetimes of 150 or 7 ps, suggesting applications in photoacoustic imaging.

Activatable Near-Infrared Fluorescence Imaging Using PEGylated Bacteriochlorin-Based Chlorin and BODIPY-Dyads as Probes for Detecting Cancer

Near infrared (NIR) fluorescent probes are attractive tools for biomedical in vivo imaging due to the relatively deeper tissue penetration and lower background autofluorescence. Activatable probes are turned on only after binding to their target, further improving target to background ratios. However, the number of available activatable NIR probes is limited. In this study, we introduce two types of activatable NIR fluorophores derived from bacteriochlorin: chlorin-bacteriochlorin energy-transfer dyads and boron-dipyrromethene (BODIPY)-bacteriochlorin energy-transfer dyads. These fluorophores are characterized by multiple narrow excitation bands with relatively strong emission in the NIR. Targeted bacteriochlorin-based antibody or peptide probes have been previously limited by aggregation after conjugation. Polyethylene glycol (PEG) chains were added to improve the hydrophilicity without altering pharmacokinetics of the targeting moieties. These PEGylated bacteriochlorin-based activatable fluorophores have potential as targeted activatable, multicolor NIR fluorescent probes for in vivo applications.

Chlorophyll-Inspired Red-Region Fluorophores: Building Block Synthesis and Studies in Aqueous Media

Fluorophores that absorb and emit in the red spectral region (600-700 nm) are of great interest in photochemistry and photomedicine. Eight new target chlorins (and 19 new chlorins altogether)-analogues of chlorophyll-of different polarities have been designed and synthesized for various applications; seven of the chlorins are equipped with a bioconjugatable tether. Hydrophobic or amphiphilic chlorins in a non-polar organic solvent (toluene), polar organic solvent (DMF), and aqueous or aqueous micellar media show a sharp emission band in the red region and modest fluorescence quantum yield (Φ_f = 0.2-0.3). A Poisson analysis implies most micelles are empty and few contain >1 chlorin. Water-soluble chlorins each bearing three PEG (oligoethyleneglycol) groups exhibit narrow emission bands (full-width-at-half maximum <25 nm). The lifetime of the lowest singlet excited state and the corresponding yields and rate constants for depopulation pathways (fluorescence, intersystem crossing, internal conversion) are generally little affected by the PEG groups or dissolution in aqueous or organic media. A set of chlorin-avidin conjugates revealed a 2-fold increase in Φ_f with increased average chlorin/avidin ratio (2.3-12). In summary, the chlorins of various polarities described herein are well suited as red-emitting fluorophores for applications in aqueous or organic media.

Aza-BODIPY based polymeric nanoparticles for cancer cell imaging

Near infrared (NIR) fluorescent dyes that are widely used for cancer imaging usually suffer from their hydrophobicity. To overcome this problem, a water-suspendable and biodegradable NIR-light-activating aza-BODIPY (AZB-NO₂) encapsulated in polymeric nanoparticles was prepared as a new class of deep-tissue imaging agent. AZB-NO₂ possesses an intense, broad NIR absorption band (600–800 nm) with a remarkably high fluorescent quantum yield. After being encapsulated with a biodegradable polycaprolactone (PCL) and a Kolliphor P188 surfactant by emulsification-solvent evaporation method, the AZB-NO₂ formed a spherical shape as observed in scanning electron micrographs (SEM) with a hydrodynamic average size of 201 nm (average PDI = 0.185). The results from transmission electron micrographs (TEM) and energy dispersive X-ray spectroscopy (EDS) elemental mapping indicated that the AZB-NO₂ homogeneously distributed in the polymeric shell. UV-visible-NIR and fluorescence spectra of the obtained nanoparticles, AZB-NO₂@PCL, revealed that the nanoparticles prepared by using 0.8 mg dye loading exhibited the highest fluorescence quantum yield. These nanoparticles were then applied for fluorescence imaging in human glioblastoma cell line (U-251). After the cells were exposed to AZB-NO₂@PCL, the materials appeared to be localized inside U-251 cells within 3 h and the fluorescence signal enhanced along with the increased incubation times. Moreover, 3D cell culture was used in this study to mimic in vivo tumor environments. The AZB-NO₂@PCL exhibited bright fluorescence from U-251 cells inside 3D Ca-alginate scaffolds after 24 h incubation. Our study successfully demonstrated that the encapsulation of hydrophobic aza-BODIPY dye could enhance the water-suspendability of the dye yielding biocompatible nanoparticles efficiently used in cancer cell imaging applications.

Encapsulation of hydrophobic aza-BODIPY dye could enhance its hydrophilicity yielding biocompatible nanoparticles which can be efficiently used in cancer cell imaging applications.

Modelling excitation energy transfer in covalently linked molecular dyads containing a BODIPY unit and a macrocycle

We model the singlet–singlet Excitation Energy Transfer (EET) process in a panel of large BODIPY–macrocycle dyads, including some azacalixphyrin derivatives.

BODIPY-Bacteriochlorin Energy Transfer Arrays: Toward Near-IR Emitters with Broadly Tunable, Multiple Absorption Bands

A series of energy transfer arrays, comprising a near-IR absorbing and emitting bacteriochlorin, and BODIPY derivatives with different absorption bands in the visible region (503-668 nm) have been synthesized. Absorption band of BODIPY was tuned by installation of 0, 1, or 2 styryl substituents [2-(2,4,6-trimethoxyphenyl)ethenyl], which leads to derivatives with absorption maxima at 503, 587, and 668 nm, respectively. Efficient energy transfer (>0.90) is observed for each dyad, which is manifested by nearly exclusive emission from bacteriochlorin moiety upon BODIPY excitation. Fluorescence quantum yield of each dyad in nonpolar solvent (toluene) is comparable with that observed for corresponding bacteriochlorin monomer, and is significantly reduced in solvent of high dielectric constants (DMF), most likely by photoinduced electron transfer. Given the availability of diverse BODIPY derivatives, with absorption between 500-700 nm, BODIPY-bacteriochlorin arrays should allow for construction of near-IR emitting agents with multiple and broadly tunable absorption bands. Solvent-dielectric constant dependence of Φf in dyads gives an opportunity to construct environmentally sensitive fluorophores and probes.