Scorpionate Catalysts for Coupling CO2 and Epoxides to Cyclic Carbonates: A Rational Design Approach for Organocatalysts

Unveiling the Obscure Potential of O-Carborane Based IFLPs for CO2 Sequestration

Sequestering carbon dioxide (CO2) from the atmosphere is necessary to achieve a sustainable environment. However, the thermodynamic stability of the CO2 molecule poses a significant challenge to its capture, necessitating catalysts that can overcome this stability. The emergence of frustrated Lewis pairs (FLPs) has opened a new dimension in the development of organocatalysts for CO2 capture and utilization. To date, various FLPs have been developed for CO2 sequestration, yet the quest for robust FLPs continues. Based on the intriguing electronic effects of the carborane polyhedral, o-carboranes can be projected as a versatile bridging unit for intramolecular FLPs (IFLPs). In the present work, o-carborane based IFLPs i. e., 1-Al(CH3)2-2-P(CH3)2-1,2-C2B10H10, 1-B(CH3)2-2-P(CH3)2-1,2-C2B10H10, 1-Al(CH3)2-2-N(CH3)2-1,2-C2B10H10, 1-P(CH3)2-2-B(CH3)2-1,2-C2B10H10 abbreviated as AlP, BP, AlN and BN have been proposed for the activation of CO2 molecule. The density functional theory (DFT) based calculations and thorough orbital analysis have been carried out to extensively study the electronic structure of the o-carborane unit. The proposed IFLPs were systematically compared with their corresponding phenyl bridged analogues to assess the effect of o-carborane bridging unit on the reactivity of the acidic and basic sites. The results show that the o-carborane supported IFLPs are more reactive towards CO2 than the phenyl bridged IFLPs. Also, placing the basic site on the B atom at the 4th position of the o-carborane bridge rather than the C atom at the 2nd position results in more reactive IFLPs.

Orbital and free energy landscape expedition towards the unexplored catalytic realm of aromatically modified FLPs for CO2 sequestration

The emergence of frustrated Lewis pairs (FLPs) has created a whole new dimension in the development of metal free catalysts for CO2 sequestration. Efforts have been made to enhance the catalytic activity of the FLPs. The aromatic modulation of the catalytic sites has been successfully demonstrated to enhance the activity towards CO2. Although various aromatically modified geminal FLPs have been investigated for CO2 capture, the catalytic space of these FLPs has not been fully resolved yet. Thus, to fulfil the knowledge gap in the understanding of the catalytic behaviour and to extend the concept of aromatically enhanced FLPs, in the present study all the possible combinations of aromatic and antiaromatic modulations of the acidic and basic sites have been proposed and examined using density functional theory based orbital analysis. Further to verify the results obtained from the orbital analysis and to fully explore the catalytic space of the proposed systems, free energy landscapes have been examined using metadynamics simulations. The detailed intrinsic bond orbital (IBO) and principal interacting orbital (PIO) analyses capture crucial details of the reactions. Furthermore, evolution of anisotropy of induced current density (AICD) along the reaction justifies the effect of aromatic/antiaromatic modulation on the catalytic sites. The results show that highly asynchronous mechanisms have been found due to the aromatic/antiaromatic modulations. The simultaneous favourable aromatic/antiaromatic modification on the acidic and basic sites may greatly reduce the CO2 activation barrier. The enhancement of the acidic character of the B atom in the intramolecular FLPs (IFLPs) leads to a thermodynamically more feasible reaction with stable CO2 adducts. The acidic site has been found to play a major role in controlling the kinetics and thermodynamics of the reaction. This study provides valuable insights into the catalytic realm of the aromatically modified FLPs, which can be utilized to design more efficient and specific next-generation FLPs.

PIO and IBO analysis to unravel the hidden details of the CO2 sequestration mechanism of aromatically tempered N/B-based IFLPs

Enhancing the catalytic reactivity of Frustrated Lewis Pairs (FLPs) in various activities such as CO2 activation and sequestration has recently gained interest among researchers around the globe. A recent investigation showed the use of aromaticity as a tool to modulate the catalytic behaviour of FLPs, establishing a whole new dimension in this area. In this work, aromatically tempered N/B-based intramolecular frustrated Lewis Pairs (IFLPs) are proposed for CO2 sequestration. Density functional theory (DFT)-based calculations were carried out to probe the reaction mechanism. The detailed mechanistic investigation was carried out using intrinsic reaction coordinate (IRC), principal interacting orbital (PIO), intrinsic bond orbital (IBO) and natural bonding orbital (NBO) analyses. The results show that aromatic gain in the system at the basic sites lowers the activation barrier, whereas the antiaromatic gain results in increased activation energy. The sequestration mechanism was found to be an asynchronous concerted mechanism, and polar solvents result in higher asynchronicity. This work, for the first time, reports asynchronicity in the catalytic behavior of aromatically tempered IFLPs, which can be crucial to designing better IFLPs for CO2 sequestration.

Unprecedented Activation of CO2 by α-Amino Boronic Acids

Efficient and environmentally benign transformation of carbon dioxide (CO2) into valuable chemicals is mainly obstructed by the lack of suitable catalysts. To date, various catalysts have already been investigated for the conversion of CO2 molecules, but still finding metal-free, simple, and environment-friendly catalysts is a topic of utmost interest among researchers. Thus, in this regard, the present work projects α-amino boronic acids (AABs) as a metal-free and simple catalyst for CO2 activation. The density functional theory (DFT)-based calculations have been carried out to explore the catalytic potential of AABs. The detailed electronic structure analysis of the considered AABs unveils the catalytic similarities with frustrated Lewis pairs (FLPs) in a gas phase. Interestingly, a peculiar catalytic action of AABs has been observed in the presence of solvents. The contrasting catalytic behavior of AABs in solvents has been extensively investigated by employing principal interacting orbital (PIO), intrinsic bond orbital (IBO), and natural bond orbital (NBO) analyses along the reaction paths. The results of the orbital studies provide concrete ground for the observed reaction mechanism. Further, the energetic analysis of the reaction of CO2 with AABs reveals that <5 kcal/mol energy is required for activation in a solvent phase, and the formed adducts are readily active. These observations show that AABs can be considered as an efficient catalyst for CO2 activation.

Synthesis of cyclic carbonates from CO2 cycloaddition to bio-based epoxides and glycerol: an overview of recent development

Anthropogenic carbon dioxide (CO₂) emissions contribute significantly to global warming and deplete fossil carbon resources, prompting a shift to bio-based raw materials. The two main technologies for reducing CO₂ emissions are capturing and either storing or utilizing it. However, while capture and storage have high reduction potential, they lack economic feasibility. Conversely, by utilizing the CO₂ captured from streams and air to produce valuable products, it can become an asset and curb greenhouse gas effects. CO₂ is a challenging C1-building block due to its high kinetic inertness and thermodynamic stability, requiring high temperature and pressure conditions and a reactive catalytic system. Nonetheless, cyclic carbonate production by reacting epoxides and CO₂ is a promising green and sustainable chemistry reaction, with enormous potential applications as an electrolyte in lithium-ion batteries, a green solvent, and a monomer in polycarbonate production. This review focuses on the most recent developments in the synthesis of cyclic carbonates from glycerol and bio-based epoxides, as well as efficient methods for chemically transforming CO₂ using flow chemistry and novel reactor designs.

Solvent-Free Coupling Reaction of Carbon Dioxide and Epoxides Catalyzed by Quaternary Ammonium Functionalized Schiff Base Metal Complexes under Mild Conditions

A series of bifunctional Schiff base metal catalysts (Zn-NPClR, Zn-NPXH, and M-NPClH) with two quaternary ammonium groups were prepared for carbon dioxide (CO₂) and epoxide coupling reactions. The effects of the reaction variables on the catalytic activity were systematically investigated, and the optimal reaction conditions (120 °C, 1 MPa CO₂, 3 h) were screened. The performances of different metal-centered catalysts were evaluated, and Co-NPClH showed excellent activity. This kind of bifunctional catalyst has a wide range of substrate applicability, excellent stability, and can be reused for more than five runs. A relatively high TOF could reach up to 1416 h^-1 with Zn-NPClH as catalyst by adjusting reaction factors. In addition, the kinetic study of the coupling reaction catalyzed by three catalysts (Zn, Co, and Ni) was carried out to obtain the activation energy (E_a) for the formation of cyclic carbonates. Finally, a possible mechanism for this cyclization reaction was proposed.

Pyridinium-Inspired Organocatalysts for Carbon Dioxide Fixation: A Density Functional Theory Inspection

The current project aims to apply the virtues of minimalism to examine the catalytic ability of commercially organic compounds of small chemical structures to catalyze the coupling reaction between carbon dioxide and propylene oxide (PO) under mild conditions. The proposed catalysts are pyridinium iodide (A), 2-hydroxypyridinium iodide (B), and piperidinium iodide (C), where their structure is based on cooperative acidic and nucleophilic motifs. The quantum chemistry model, M062X-D3/def2-TZVP//M062X-D3/def2-SVPP, was used to understand the reaction mechanism and the catalytic performance. Since the coupling reaction was performed under excess PO, we proposed that PO serves as a reactant and solvent. Therefore, calculations were performed in gas and liquid phases for comparison. The findings indicated that the rate-determining step depends on the chemical structure of the catalyst and whether the phase is a gas or liquid phase. In general, modeling in the liquid phase produces potential energy surfaces of lower energy barriers. The noncovalent interactions reflect the role of hydrogen bonding in controlling the kinetic behavior of the coupling reaction. Based on the finding, catalyst A is the best candidate for transforming CO₂ into cyclic carbonates.

Boron based intramolecular heterocyclic frustrated Lewis pairs as organocatalysts for CO2 adsorption and activation

The massive increase in the amount of carbon dioxide (CO₂ ) in the atmosphere has led to serious environmental problems. One of the best ways to tackle this problem is the CO₂ capture and its utilization as a C1 carbon source for the production of industrially valuable chemicals. But the thermodynamic stability of the CO₂ molecule poses a great challenge in its transformation. Since the last two decades, various metal-based and organic catalysts have been developed for the adsorption and activation of CO₂ . Among all the catalysts the Frustrated Lewis pairs (FLPs) have been shown great potential in CO₂ capture and conversion. Thus, in the present work, Intramolecular Frustrated Lewis pairs (IFLP) based on N-Heterocycles with boron group functionalization at the α-position to N has been theoretically investigated for CO₂ activation. Thorough orbital analysis has been carried out to investigate the reactivity of the proposed catalytic systems. The result shows that the considered IFLPs are capable of activating CO₂ with minimum energy requirements. The CO₂ activation energy range between 8 and 14 kcal/mol. The non-polar solvent was found to be the suitable medium for the reaction. Also, the reversibility of the adducts formed with the IFLPs can be controlled by appropriate substitution at B atom in the IFLPs.

A DFT-design of single component bifunctional organocatalysts for the carbon dioxide/propylene oxide coupling reaction

The aim of this work is to develop single-component bifunctional organic catalysts capable of effective coupling reactions between CO2 and propylene epoxide (PO) under mild conditions using density functional theory (DFT) calculations. The dual functionalities of the target catalysts come from their inclusion of a hydroxyl-containing electrophile and the nucleophilicity of iodide ion. In this respect, a series of hydroxyl-functionalized quaternary onium-based ionic liquids were studied using M062X-D3/def2-TZVP//M062X-D3/def2-SVPP model chemistry. The design of catalysts was based on tailoring two structural factors; the first one is the onium center of pnictogens (N, P, As, Sb and Bi), and the second one is the number of hydrogen bond donor groups (n = 1-3). The proposed catalysts were examined by investigation of their catalytic mechanisms to afford the cyclic carbonate. Additionally, the highest active transition state, along with the potential energy difference, was examined using non-covalent interaction (NCI) analysis. Also, the activation strain model (ASM) was used to explain the kinetic behavior of PO activation. The findings showed that the ring-opening step of PO is always the critical step of the reaction. Among the suggested catalysts, the results indicated that the dihydroxyl ammonium-based catalyst (2OH-NI) is a good choice for this catalysis under mild and solvent-free conditions.

Bifunctional zinc and magnesium Schiff-base complexes containing quaternary ammonium side-arms for epoxide/CO2 coupling reactions

Novel bifunctional zinc and magnesium Schiff-base complexes containing quaternary ammonium halide side-arms were developed. Zinc complex 1Et-I (0.02 mol%) having an iodide anion has shown the highest TOF for the propylene oxide/CO2 coupling reaction of up to 459 h-1. This TOF value was maintained even when the catalyst loading was reduced to 0.005 mol%.

Self-Assembled Bimetallic Aluminum-Salen Catalyst for the Cyclic Carbonates Synthesis

Bimetallic bis-urea functionalized salen-aluminum catalysts have been developed for cyclic carbonate synthesis from epoxides and CO₂. The urea moiety provides a bimetallic scaffold through hydrogen bonding, which expedites the cyclic carbonate formation reaction under mild reaction conditions. The turnover frequency (TOF) of the bis-urea salen Al catalyst is three times higher than that of a μ-oxo-bridged catalyst, and 13 times higher than that of a monomeric salen aluminum catalyst. The bimetallic reaction pathway is suggested based on urea additive studies and kinetic studies. Additionally, the X-ray crystal structure of a bis-urea salen Ni complex supports the self-assembly of the bis-urea salen metal complex through hydrogen bonding.

Syntheses, Characterization, and Application of Tridentate Phenoxyimino-Phenoxy Aluminum Complexes for the Coupling of Terminal Epoxide with CO2: From Binary System to Single Component Catalyst

A series of binuclear aluminum complexes 1–3 supported by tridentate phenoxyimino-phenoxy ligands was synthesized and used as catalysts for the coupling reaction of terminal epoxide with carbon dioxide. The aluminum complex 1, which is catalytically inactive toward the coupling of epoxide with CO2 by itself, shows moderate activity in the presence of excess nucleophiles or organic bases at high temperature. In sharp contrast to complex 1, bifunctional complexes 2 and 3, which incorporate tertiary amine groups as the built-in nucleophile, are able to efficiently transform terminal epoxide with CO2 to corresponding cyclic carbonates as a sole product by themselves at 100 °C. The number of amine groups on the ligand skeleton and the reaction temperature exert a great influence on the catalytic activity. The bifunctional complexes 2 and 3 are also active at low carbon dioxide pressure such as 2 atm or atmospheric CO2 pressure. Kinetic studies of the coupling reactions of chloropropylene oxide/CO2 and styrene oxide/CO2 using bifunctional catalysts under atmospheric pressure of CO2 demonstrate that the coupling reaction has a first-order dependence on the concentration of the epoxide.

Ni and Zn N-confused porphyrin complexes as recyclable catalysts for high efficiency solvent-free CO2 fixation into cyclic carbonates

Zn^II[2-N(CH₂)₅N⁺(CH₃)₃Br⁻NCTPP] is a bifunctional catalyst that exhibits efficiency for CO₂ fixation with epoxides with TOF up to 370 000 h⁻¹ and TON 1.3 × 10⁶. It can also be recycled for the formation of glycerol carbonate from CO₂ and glycidol.

Poly(hydroxyurethane): catalytic applicability for the cyclic carbonate synthesis from epoxides and CO2

We have developed a synthetic methodology using poly(hydroxyurethane) as an organocatalyst for the chemical fixation of CO2 into epoxides, leading to the formation of five-membered cyclic carbonates with remarkably high selectivity and yields. The catalyzed reaction was applicable to various epoxides.

Dual-Functional Electrolyte Additives toward Long-Cycling Lithium-Ion Batteries: Ecofriendly Designed Carbonate Derivatives

Long-term stability of the solid electrolyte interphase (SEI) and cathode-electrolyte interface (CEI) layers formed on anodes and cathodes is imperative to mitigate the interfacial degradation of electrodes and enhance the cycle life of lithium-ion batteries (LIBs). However, the SEI on the anode and CEI on the cathode are vulnerable to the reactive species of PF₅ and HF produced by the decomposition and hydrolysis of the conventional LiPF₆ electrolyte in a battery inevitably containing a trace amount of water. Here, we report a new class of cyclic carbonate-based electrolyte additives to preserve the integrity of SEI and CEI in LIBs. This new class of additives is designed and synthesized by an ecofriendly approach that involves fixing CO₂ with functional epoxides bearing various reactive side chains. It was found that the cyclic carbonates of 3-(1-ethoxyethoxy)-1,2-propylene carbonate and 3-trimethoxysilylpropyloxy-1,2-propylene carbonate, possessing high capability for the stabilization of Lewis-acidic PF₅, exhibit a capacity retention of 79.0% after 1000 cycles, which is superior to that of the pristine electrolyte of 54.7%. Moreover, TMSPC has HF-scavenging capability, which, along with PF₅ stabilization, results in enhanced rate capability of commercial LiNi_0.6Mn_0.2Co_0.2O₂ (NCM622)/graphite full cells, posing a significant potential for high-energy-density LIBs with long cycle stability.

Metal β-diketonate complexes as highly efficient catalysts for chemical fixation of CO2 into cyclic carbonates under mild conditions

The potential of metal β-diketonate complexes for the catalysis of the chemical fixation of CO₂ into cyclic carbonates at 1 atm CO₂ and near room temperature was demonstrated. Their potential for the capture and simultaneous conversion of CO₂ in a dilute CO₂ stream was also determined. The catalysts were easily synthesized and commercially available. Therefore, this CO₂ transformation was less energy- and material-consuming, which made this reaction closer to true "green" chemistry.

Recent Advances in the Chemical Fixation of Carbon Dioxide: A Green Route to Carbonylated Heterocycle Synthesis

Carbon dioxide produced by human activities is one of the main contributions responsible for the greenhouse effect, which is modifying the Earth’s climate. Therefore, post-combustion CO2 capture and its conversion into high value-added chemicals are integral parts of today’s green industry. On the other hand, carbon dioxide is a ubiquitous, cheap, abundant, non-toxic, non-flammable and renewable C1 source. Among CO2 usages, this review aims to summarize and discuss the advances in the reaction of CO2, in the synthesis of cyclic carbonates, carbamates, and ureas appeared in the literature since 2017.

Efficient synthesis of epoxybutane from butanediol via a two-step process

A novel approach for the synthesis of epoxybutane via decarboxylation of butenyl carbonate derived from butanediol was developed for the first time. For the carbonylation of butanediol with dimethyl carbonate, NaAlO₂ has exhibited excellent catalytic activity under mild reaction conditions. The yield of butenyl carbonate reached as high as 96.2%. NaAlO₂ provides suitable acid-base active sites to promote the transesterification reaction of butanediol and dimethyl carbonate. For the following step of decarboxylation of butenyl carbonate, ionic liquid 1-butyl-3-methylimidazolium bromide could effectively catalyze the decarboxylation process both in batch or continuous processes. Moreover, the catalytic mechanism for the crucial step of decarboxylation of butenyl carbonate over 1-butyl-3-methylimidazolium bromide was explored using DFT calculations. The results showed that the electrostatic and hydrogen-bond effects of 1-butyl-3-methylimidazolium bromide played a crucial role for the generation of epoxybutane. Briefly, the Br anion of the ionic liquid attacks the methylene of the ring and the H of the ionic liquid cation attacks the carbonyl oxygen, which facilitated the five-ring opening and subsequent decarboxylation to form BO. This study not only provided a new and green synthetic route for producing epoxybutane, but also contributed to the effective utilization of butanediol, which is inevitably produced as by-product in the process of coal to ethylene glycol, suggesting a promising application in the clean manufacture of epoxybutane with inexpensive cost.

Zinc 2-N-methyl N-confused porphyrin: an efficient catalyst for the conversion of CO2 into cyclic carbonates

A zinc 2-N-methyl N-confused porphyrin (Zn(NCP)Cl) catalyst was developed for the solvent-free synthesis of cyclic carbonates from epoxides and CO₂.

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

The strategies and challenges in the preparation of fully renewable materials prepared from CO₂ and biomass enabled by catalysis are presented.

Organocatalysis: A Brief Overview on Its Evolution and Applications

The use of small organic molecules as catalysts has gained increasing importance recently. These substances, the so-called organocatalysts, present a lot of advantages, like being less toxic, less polluting, and more economically viable than the organometallic catalysts that dominate asymmetric synthesis. This work intends to briefly show some classic works and recent publications, explaining the advantages of organocatalysis and the different types of compounds used in this field, as well as their course of action.