One-Pot Double [3 + 2] Cycloadditions for Diastereoselective Synthesis of Pyrrolidine-Based Polycyclic Systems

Visible-Light-Promoted N-H Insertion/Controllable Transformation of Diazoalkanes and 3-Aminomethylated Maleimides

The utilization of photogenerated carbene species to perform N-H insertion reactions has attracted considerable attention in the past few years. In this Article, we disclose a visible-light-promoted N-H insertion of 3-aminomethylated maleimides with aryl diazoacetates under sole blue LED irradiation. Continuous flow reactor technology was exploited to improve the reaction efficiency. By simply varying the reaction conditions, the formed N-H insertion products could be selectively transferred to bioimportant octahydropyrrolo[3,4-c]pyrroles and E-selective trisubstituted olefins.

Cascade 1,3-Diploar Cycloaddition and Lactamization for Diastereoselective Synthesis of Pyrrolidinedione-Fused Tetrahydropyrroloisoindolones

A cascade reaction sequence of 1,3-dipolar cycloaddition and lactamization for the synthesis of tetrahydropyrroloisoindolone derivatives is developed. This efficient one-pot synthesis generates four bonds and two heterocyclic rings in a diastereoselective manner. Only 2 equiv of H2O are produced as the side product.

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

A novel four-component reaction in one pot as an atom- and step-economic process was developed to synthesize diastereoselectively spirooxindolepyrrolothiazoles through sequential N,S-acetalation of aldehydes with cysteine and decarboxylative [3 + 2] cycloaddition with olefinic oxindoles. High synthetic efficiency, operational simplification and reaction process economy using EtOH as solvent, and only releasing CO2 and H2O as side products confer this approach favorable in green chemistry metrics analysis.

Recent developments in one-pot stepwise synthesis (OPSS) of small molecules

One-pot synthesis is an active topic in organic chemistry due to its intrinsic advantages of simple operation, high mass efficiency, low cost, and less amount of waste disposal. Among three kinds of one-pot syntheses, 1) cascade reactions, 2) multicomponent reactions (MCRs), and 3) one-pot stepwise synthesis (OPSS), OPSS could be more flexible and practical since it is carried out stepwisely and have variable reaction conditions for different steps. This perspective article uses selected examples to highlight the recent development in OPSS involving cyclization, cycloaddition, rearrangement, and catalytic reactions for the synthesis of heterocyclic scaffolds, asymmetric molecules, natural products, and bioactive compounds.

Three-Component [3+2] Cycloaddition for Regio- and Diastereoselective Synthesis of Spirooxindole-Pyrrolidines

1,3-Dipolar cycloaddition of nonstabilized azomethine ylides derived from α-C-H functionalization of tetrahydroisoquinoline for regio- and diastereoselective synthesis of spirooxindole-pyrrolidines is developed. A three-component reaction of readily available cyclic amine, aryl aldehydes, and olefinic oxindoles provides a pot, atom and step economy (PASE) approach for making spiro-heterocyclic compounds with biological interest.

Azomethine ylide cycloaddition of 1,3-dienyl esters: highly regio- and diastereoselective synthesis of functionalized pyrrolidinochromenes

An efficient protocol for the synthesis of tricyclic pyrrolidinochromenes has been developed via an intramolecular 1,3-dipolar cycloaddition of azomethine ylides generated in situ from 1,3-dienyl ester tethered O-hydroxyarylaldehyde and glycine esters. The reaction is highly regio- and diastereoselective in nature and provided the potentially bioactive pyrrolidine fused tricyclic cycloadducts in excellent yields with wide substrate scope. Interestingly this reaction constructs two rings and four contiguous stereogenic centers in which one of them is an all carbon quaternary center in a unique fashion.

Pseudo-Five-Component Reaction for Diastereoselective Synthesis of Butterfly Shaped Bispiro[Oxindole-Pyrrolidine]s

A pseudo-five-component reaction involving double decarboxylative 1,3-dipolar cycloaddition of azomethine ylides with olefinic oxindoles for the diastereoselective synthesis of bispiro[oxindole-pyrrolidine]s is developed. The major diastereomers are unique butterfly shaped compounds with a plane of symmetry. Recyclable zeolite HY acid catalyst is used to promote the reaction, and only CO₂ and H₂O are generated as byproducts.

Highly diastereoselective cascade [5 + 1] double Michael reaction, a route for the synthesis of spiro(thio)oxindoles

The first diastereoselective synthesis of spirothiooxindoles is reported via the Michael reaction between thiooxindoles and dibenzalacetones. The reaction was conducted without any catalyst or additive under green conditions, i.e., ethanol as the solvent and at room temperature. In addition, the described robust method benefits from scalability, simple work-up, and column chromatography-free purification. This work demonstrates the art of governing regio- and stereoselectivity, which has been discussed in the light of Density Functional Theory calculations. Our method represents the first synthesis of spiro[cyclohexanone-thiooxindoles] with the relative configuration of the aryl moieties at the cyclohexanone ring as cis. The obtained cis-spirothiooxindoles, can be used to afford cis-spirooxindoles, which their synthesis had not been explored before. According to our molecular docking studies, cis-spirooxindoles demonstrate higher binding affinities than corresponding trans-spirooxindoles for the OPRT domain of the Leishmania donovani uridine 5′-monophosphate synthase (LdUMPS). Thus, the reported method may eventually be utilized to develop new hit compounds for leishmaniasis treatment.

Phosphine-catalyzed sequential (2+3)/(2+4) annulation of γ-vinyl allenoates: access to the synthesis of chromeno[4,3-b]pyrroles

A phosphine-catalyzed cascade (2+3)/(2+4) cyclization reaction of γ-vinyl allenoates with aldimine esters has been developed to provide a series of chromeno[4,3-b]pyrrole derivatives that contain three contiguous stereogenic centers. The method gives a good yield, excellent chemoselectivity and diastereoselectivity under mild conditions.

Synthesis of pyrrolidinedione-fused hexahydropyrrolo[2,1-a]isoquinolines via three-component [3 + 2] cycloaddition followed by one-pot N-allylation and intramolecular Heck reactions

Two kinds of [3 + 2] cycloaddition intermediates generated from the three-component reactions of 2-bromobenzaldehydes and maleimides with amino esters or amino acids were used for a one-pot N-allylation and intramolecular Heck reactions to form pyrrolidinedione-fused hexahydropyrrolo[2,1-a]isoquinolines. The multicomponent reaction was combined with one-pot reactions to make a synthetic method with good pot, atom and step economy. MeCN was used as a preferable green solvent for the reactions.

Domino Transformations of Ene/Yne Tethered Salicylaldehyde Derivatives: Pluripotent Platforms for the Construction of High sp3 Content and Privileged Architectures

Diversity-oriented synthesis (DOS) has become a powerful synthetic tool that facilitates the construction of nature-inspired and privileged chemical space, particularly for sp³ -rich non-flat scaffolds, which are needed for phenotypic screening campaigns. These diverse compound collections led to the discovery of novel chemotypes that can modulate the protein function in underrepresented biological space. In this context, starting material-driven DOS is one of the most important tools used to build diverse compound libraries with rich stereochemical and scaffold diversity. To this end, ene/yne tethered salicylaldehyde derivatives have emerged as a pluripotent chemical platform, the products of which led to the construction of a privileged chemical space with significant biological activities. In this review, various domino transformations employing o-alkene/alkyne tethered aryl aldehyde/ketone platforms are described and discussed, with emphasis on the period from 2011 to date.

Consecutive multicomponent reactions for the synthesis of complex molecules

Multicomponent reactions (MCRs) involving a minimum of three reactants or reaction centers are conducted in one pot and with a single operational step. This synthetic method has a good pot, atom and step economy in the preparation of diverse and complex molecular scaffolds. Consecutive MCRs, also known as sequential or multiple MCRs, by combining two or more MCRs, exhibit even higher synthetic efficiency, product structural diversity, and molecular complexity. This review article highlights the Ugi, Groebke-Blackburn-Bienaymé, Biginelli, Huisgen, Petasis, Gewald, and Asinger reaction-initiated consecutive MCRs.

Double 1,3-Dipolar Cycloadditions of Two Nonstabilized Azomethine Ylides for Polycyclic Pyrrolidines

Nonstabilized azomethine ylides derived from decarboxylation of oxazolidin-5-ones were used for double 1,3-dipolar cycloadditions in diastereoselective synthesis of pyrrolidine-containing tetracyclic compounds. This is the first example of one-pot and five-component reactions involving two nonstabilized azomethine ylides. Only CO₂ and water were generated as byproducts.

One-Pot Synthesis of Triazolobenzodiazepines Through Decarboxylative [3 + 2] Cycloaddition of Nonstabilized Azomethine Ylides and Cu-Free Click Reactions

A one-pot synthesis of triazolobenzodiazepine-containing polycyclic compounds is introduced. The reaction process involves a decarboxylative three-component [3 + 2] cycloaddition of nonstabilized azomethine ylides, N-propargylation, and intramolecular click reactions.